Descriptive Flexfield showing is not the data in the table

Similar Questions

• 2015 CC Dreamweaver shows why not the border of the table. In the prevoios version Dreamweaver CS6 see the border of the table.

  2015 CC Dreamweaver shows why not the border of the table. In the previous version of Dreamweaver CC see the border of the table.

  See the difference

  Dreamweaver CC 2015

  

  Dreamweaver CS6

  

  The first image shows 'Live' display, as the second watch design mode. That's what I think "Design" shows in the latest version of DW.

  

• presentation is not showing is not the projector

  I am a teacher. I use keynote to give the notes/lecture to my students. Today, after having finished class I escaped to my presentation and made preparations to restart. When I hit 'play', the presenter appeared on my MacBook Pro retina (as it does in general) and had no problems coming on my iPad. but he kept on my projector showing my office. I escaped and tried again, same thing. I unplugged my thunderbolt port projector cable then rep notched in: same result. I have mirrored display of the mbp and projector. Came on the MBP and not the projector. I tried to leave the program, which took time. When I re-opened, the main screen has become transparent. I then leave off of it and restarted the computer. This solves the problem, but after my next presentation, it's the same thing. I ran a scan of disk utility, and it says everything is fine. I am running the latest version of El Cap, in fact I've just updated last night. Could the update be the cause? Also, while this was happening, I was unable to restart or shut down the computer. I had to make a hard stop down by pressing the power button and hold. Ideas?

  Try to reset the Keynote, perform all the steps in the order listed

  Keynote, you must use a request to work procedure removal tool uninstall

  AppCleaner is free and works well for this procedure, it can be download here: Appcleaner

  • uninstall the Keynote with a removal tool
  • empty the trash
  • Shut Down the Mac (Apple menu > turn off)
  • Wait 10 seconds, then press the power button
  • as soon as you hear the startup tone, hold down the SHIFT key
  • release the SHIFT key when you see the gray Apple screen, start-up will take a few minutes longer than usual as the Mac performs a software repair
  • After the repair and the Mac is completely started, restart the Mac normally (Apple > restart)
  • install Keynote from the Mac App Store

• Index is not showing is not the correct page numbers

  I use 7 HR to develop versions online and print the user guide. There are several tables of contents for this project (the tables are specific to the user). When I generate the project for my chosen table of content, and I find the results, the index numbers do not show the right page. Example: number of units... 106; number of units is actually on page 112.

  Is there a trick to make it display correctly?

  Thanks in advance!

  ~ Jennifer

  Have you tried right click next to the index and selecting the update field?

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Show desktop not the same number of vcpu virtual machine parent

  Hello

  I created a pool of 4 vcpu (Sockets 2 X 2 hearts).

  The created Office use only 1vcpu...

  any idea?

  If I understand the question, then it would be possible that the used snapshot happens to have 1 vCPU while the current state of the virtual machine that you used has 4 vCPUs?

  In other words, when you base the pool on a snapshot, I believe that the State of the equipment at the time of the snapshot will be used, not the State of the current material.

• ADF Table shows is not the first rank after a RPP Insert

  Hello!
  
  I am having some problems after the insertion of a row in a Table (Partial Refresh with "* AdfFacesContext.getCurrentInstance () .addPartialTarget (this.myTable) *"). ADF
  
  Here's how the table looks like after the line is inserted:
  http://img836.imageshack.us/img836/4541/imagem3pg.jpg
  
  Watch the scrolling to the right, there is a small blank space after the update of the table...
  
  
  And here is when I scroll to the top, I see the new registry:
  http://img827.imageshack.us/img827/3919/imagem4g.jpg
  
  
  I tried to change the RangeSize but nothing happens.
  
  Jdev Version: 11.1.1.3
  With the help of ADF with EJB.
  
  Published by: RenanMC on 24/08/2010 07:20

  Try to set the attribute "DisplayRow' in the table of the"first. "

  Timo

• Hide or show rows in the table with AppleScript?

  I have a large table number, and I sometimes want to display the entire table and sometimes select a group of lines to hide or show, to make the display of data more convenient.

  By selecting many rows to hide is tedious (there are many, and they are not contiguous).  So I would use AppleScript to do this.  But in the numbers AppleScript dictionary, I don't see any way to apply an attribute "hidden" in rows, columns or beaches.  Y at - it a trick I'm missing?  Or it simply not exist in the current implementation?

  Thank you

  AFAIK, you can't hide a line or set a height of 0 using AppleScript, although I suggested that any time via numbers of > provide comments numbers in the menu.

  What you could do is filter the table to hide the lines, probably by adding a column filter designating the lines that you want to see (or, conversely, hide).  This filter can be turned on and off via AppleScript using the filtered table property, although it would probably be easier to do via the integrated interface.

  SG

• Watch not the tables, views,... in vs2010

  Hello
  
  I installed ODP.net + ODT (11i) for use with vs2010 & oracle 10.02.0010 (upgrade to oracle 11).
  The product is installed correctly, I can connect to the database using ODBC and PACO.
  However, when connecting with the ODP in vs2010 I do not see the tables, views, or stored procedures (can not see anything really). When you use ODBC, everything works: I see all the tables, views, etc. which are in the database, and I can ask questions them.
  I also tried to run a query by using the ODP.net and it gave me: ORA-00942: table or view does not exist.
  
  I did a search on the forums, but none of the planned solutions, nothing changed for me.
  
  Someone at - it ideas?
  
  Published by: user13493229 on 18-mei-2011 11:05

  Hello

  First of all, make sure that you see "ODP.NET" in the connection to Server Explorer dialog box.

  Then, check the tab "Filters" of the connection dialog box. By default, we block public synonyms and schema objects that you do not own.

  If you still do not see objects, then most likely your DBA not gave you enough privileges to use these tools.

  Try looking the advice I gave in the following thread explaining how to enable tracing ODP.NET. First glance to see that the SQL involved in the ORA-942.
  Then look at the other SQL we deliver and see why you are not able to get all the lines of the.

  VS2010 ORA-00942 table or view does not exist

• Rows from the outer Table shows only not all data.

  Hello
  
  I have a line to 80 characters that I import in an external table.
  
  80% imports fine line data, but some lines are cut.
  
  The bytes in the file are as follows.
  ABCABC2334 0000001000010000001000000001 000000 00001C A002
  
  Bytes in an external table.
  ABCABC2334 0000001000010000001000000001 000000 A002
  
  The bytes in the row of the outer table stop somewhere at the end of 000000 and the 00001C is cut.
  
  What build be the cause of this?
  
  I am able to read the characters at the beginning and towards the end of the record of 80-character line.
  
  The external file below performs the following operations.
  ABCABC2334 0000001000010000001000000001 000000 01B A002
  
  I can even make a definition of the external table (c1 char (1), c2 char (1),... c80 (1) tank and all the characters see fine in the specified columns.)
  
  Here is the last definition of the external table. The "middle" column still shows this behavior. Basically, it is in the file and can be seen with every character in the definined line, but not as a group of characters.
  
  DB CHARACTERSET WEBISO8859P1
  
  CREATE TABLE EXT_PROJ_1
  (
  Field1 tank (6 BYTES),
  Field2 float (4 BYTES),
  medium (67 BYTES)
  field3 tank (3 bytes),
  CR tank (2 bytes)
  )
  EXTERNAL ORGANIZATION
  (TYPE ORACLE_LOADER
  THE DEFAULT DIRECTORY EXP_DIR
  ACCESS SETTINGS
  (
  RECORDS delimited by '\r\n '.
  FIELDS (field1, position(1:6),
  position(7:10) Field2.
  average position(11:77)
  field3 position(78:80).
  CR position(81:82)
  )
  )
  LOCATION (EXP_DIR: 'ext_proj_1.txt')
  )
  REJECT THE LIMIT 1
  noPARALLEL
  NOMONITORING;
  
  Published by: 917320 on March 13, 2012 09:07

  Looking at your table definition:

  field1 char(6 BYTE),
  field2 char(4 BYTE),
  middle char(67 BYTE),
  field3 char(3 byte),
  cr char(2 byte)
  

  column in which you will store a string of 80 bytes?

  BTW: You said "import into an external table." You import FROM an external table or EXPORT to an external table?

• Photos not syncing, deleting, showing is not the activity of the messages

  Keep spoil my Apple Watch and my phone and I don't know how to solve this problem, and I prefer not rely in factory setting. My watch won't sync my photos from my phone now, my activity on my watch will not be displayed on the phone app to see the activity of the months or days, my imessages has been deleted on my phone and I don't know what to do! Is anyone else having the same issues and know how to fix?

  HI - try the following steps:

  Check that Bluetooth and Wi - Fi are activated on your iPhone:

  -Phone: Settings > Bluetooth - on.

  -Phone: Settings > Wi - Fi - on.

  -For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

  Check that your iPhone and Apple Watch are connected:

  -When you show the time on your watch, drag upward on your watch dial > drag left / right for the look of settings > check it shows connected and shows a green phone icon. Disable airplane Mode if it is enabled.

  On your iPhone, go to: settings > Messages > turn off iMessage at the top of the screen, pause for a few moments, then turn it back on.

  On your iPhone close apps open (including the app shows and parameters):

  -Double-press the Home button, and then drag upward on each of the app previews to close.

  Restart your iPhone and your watch. Close the two devices together, and then restart your iPhone first:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If the problem persists, it can help to disable the twinning and re - pair your watch. The app shows on your iPhone shows backups automatically, including a new when the disparity with the app choose this option to restore the watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• WMP shows is not the files on my rocket I just synced

  ARGH! I'm at my wit's end!

  I just synced my files on my card of 4 GB with WMP 11, in the car, select mode (I know, I know that everyone says not to do, but it worked until last night!).  When I went to check on the unit this morning, it says no file list. I switched to the mode MTP and WMP doesn't say still no file. I went to MSC... same thing. The files are on my rocket tho. Oh and BTW, this isn't a problem on the internal memory.  I see THAT very well

  Am I condemned to having to reformat & resynchronize my whole card when I want to edit or add a playlist?

  I will never be able to see what I have synced on my card over in WMP? Is this something that can

  addressed in the new firmware update?

  Also, I can see the files on Rhapsody, but playlists shows 0 files. (I could never seem to do)

  playlists with Rhapsody. It any suggestions? )

  I'm sorry if this has been posted before.

  Please respond quickly before I'm bald to tear my hair out in frustration

  Well, I really solved my problem. I had the same problem with a 2nd card, so I realized that the problem wasn't the card, I had already thought. I started searching WMP & found this: I selected:
  Tools-> Options-> Options tab.
  From there on, I have highlighted on the map and supported the button refresh and viola! There are the contents of the card.

  Back to the 4 GB card!

• updated Windows 7, but only shows is not the cutting tool

  I have updated my windows 7 and installed again updated but it still not showing the cutting tool. I also checked control panel
  installed the program, but it does not appear Tablet PC component
   
  Please suggest me the solution

  What do you mean by "update my windows 7'?

  And if in search programs and files that you enter... Snip does not reveal the shortcut?

  Or all programs > Accesseries > snipping tool?

• Overview of Muse is not showing is not the correct fonts

  I am currently in the middle of building a site of fluid layout to Muse a typekit (Futura PT) font and until today, in Muse preview mode showed the site because I've been designing.

  I launched the site yesterday (www.weare-awesome.co.uk) howeverneeded to do some bug fixes. When I went back to the file in Muse, I've changed some things, went to listen to samples and the text had default Helvetica/Arial in this mode. I did a publication and online site shows Futura...

  It's really weird, however more so impractical to have a preview (offline) mode which is not displayed as expected because I need to test before you publish the modified changes.

  Can someone tell what is happening?

  Screen grabs attached for ref.

  

  

  Hi Dan,.

  This may be related to a question of Typekit affecting preview/publish Muse for a few hours today. The problem has been resolved. Could you please try again and let us know if you still have a problem? Sorry for the inconvenience.

  Thank you

  Abhishek

• Trying to create a shared via iSCSI storage. Storage shows is not the second ESXI host

  I created an iSCSI lun and gone through the process of adding it to my first ESXI host. It displays well in storage adapters-> Details and I can also add as a data store.

  When I try and the same thing on my second ESXI, the iSCSI host does not appear under storage adapters-> Details (although properties are correct within the parameters of the iSCSI software card) and I can not add it as a data store.

  If I remove compleatley from the first host I can then add it to the second, but (I think) need in the two hosts to use a shared storage?

  I'm doing something wrong?

  Thank you

  What iSCSI solution do you use? Are there limits set on the number of connections?

• Reader Adobe is not showing is not the images

  I try to open the pdf document includes with the images. Text is displayed correctly, but the images are dimmed. I can open the same document with images in Nitro Pro, but not with Adobe, which means no problems with the file damage.

  Hi shahabk,

  Please make sure that show large Images in selected in the Page display preferences. Choose Edition > Preferences (Windows) or Reader > preferences (Mac OS), and then click the display of the Page category. View the large Images option is to halfway to the bottom of the dialog box.

  Best,

  Sara