Trying to create a shared via iSCSI storage. Storage shows is not the second ESXI host

Similar Questions

• Access to VMFS existing via iSCSI storage

  Hi all

  In a test environment, I'm trying to access a VMFS existing via iSCSI data store.

  In the storage adapters, I clicked on Rescan. The SCSI target is displayed correctly. However, it is not in the storage, even after clicking on refresh.

  If I click on add storage and select disk/LUN, I can see the storage device, clicking on watch then the primary Partition as VMFS. Of course if I click Next again this reformatted it as a new data store, something I don't want to do.

  How can I get this existing VMFS volume is displayed in the storage?

  TYIA,

  Eric

  www.mymanagedbackup.com

  Have you tried to define enableresignature on 1 in the advanced settings (see attached) and then a new analysis.

• Why dllhost.exe crashes when trying to create thumbnails for video files 3D it was working before the update to Internet Explorer 10

  I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.

  The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.

  Updated platform for Windows 7 x 64-Edition (KB2670838)

  http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0

  This update of the platform also allows the emergence of the problem.

  I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.

  The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.

  Updated platform for Windows 7 x 64-Edition (KB2670838)

  http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0

  This update of the platform also allows the emergence of the problem.

  Why does dllhost.exe Com surrogate consumes memory until the crash.

  This happens when I highlight or view a folder containing video files, even if I close the file or select another folder, that maintains the memory consuming.

  It seems to happen more often with the 3D video files, but it has done the same with the 2D files.

  It therefore seems to be a problem with the windows thumb nails system on these files.

  Besides trying to delete or move the file or folder, while the Com Surrogate consumes memory Delete cannot complete the task.

  What I did is to find by selecting delete file in question, then go to Task Manager stopping Com Surrogate, then deletes the file.

  OK guys and girls, here is the scoop or what I discovered.

  Went to paid Support MS started a ticket gave them the info of the problem.

  I backed up before you have to pay, but it will still leave a ticket on the system req.

  Them I did a searck masive on this problem and ran into this and I beleve it's true. It's the way they handled a similar problem in Vista.

  So here it is.

  "MS are aware of the problems with certain chipset / combinations ofdriver with the updated KB2670838.
  They also have problems with the installation of IE10

  They work on these two issues and will be updated as and when they are convinced that they have solved the problems.
  In the meantime, the recommendation is that if the update isn't the first phase of installation, make sure that it is uninstalled and then hide it - Windows Update will display it when it is updated. »

  To uninstall IE10 and KB2670838 update, should be fixed hide automatic update when your pop back up to be updated the problem.

  Evidence that MS knows that IE10 has problems on some hardware platforms is here.

  http://TechNet.Microsoft.com/en-us/IE/jj898509.aspx

  Hope this helps Every One.

• trying to create a clip that bounces off all four sides of the stage

  using the syntax below I have created a video called "BALL" bouncing to the left 'x' and moves to the right of the scene 'x.520' and bounces in the beginning 'x '.

  HOW CAN I CREATE A CLIP THAT BOUNCES OF THE FOUR SIDES OF THE STAGE AND STOPS ON THE BOUNCE FOURTH?

  var ballTween:Tween = new Tween (ball, "x", Bounce.easeInOut, ball.x, 520, 5, true);

  ballTween.addEventListener (TweenEvent.MOTION_FINISH, tweenFinishedF);

  function tweenFinishedF(e:TweenEvent):void {}

  new Tween(ball,"x",Bounce.easeOut,ball.x,0,5,true);

  }

  Thank you very much!!!

• Can send via Apple Mail to work, but not the House

  I have a problem that lasts for 3 years, on both machines (a Mavericks and now El Capitan).

  Sometimes Apple Mail smtp server sends a message when I'm home, sometimes not. Sometimes, I've updated the smtp settings to add a server and change some thing, then Mail wouldn't send when I'm at work.

  I asked CE Office at work, they do not know what is happening and gave me what should be the right settings.

  I'm about two seconds of dumping Apple Mail for good, if I can find another application that's all good.

  Thank you.

  Hello

  Open the application Mail of Mac then go to the menu bar and click window > connection doctor

  Use Mail connection doctor

• My account for my laptop Toshiba Windows 8 was created by my brother-in-law, and he is not the administrator account so Im limited on some applications. What should I do now?

  If I want to install some applications that I am not allowed to .this which should I get?

  Try this trick:
  http://www.Petri.co.il/enable-administrator-account-Windows-8.htm

• Creating cloud is not showing is not the products available for download

  Hello

  My apologies if this is a stupid question, but I just of signed CC and downloaded Photoshop and InDesign, without any problem, but the first (among others) does even not appear in the list of available downloads.

  Can someone advise please why some applications would be missing and how to access it? Thank you :-)

  Your operating system is not 64-bit. All video applications require a 64-bit OS. Check their requirements on the product pages.

  Mylenium

• Problem when adding 2nd host in Iscsi storage shared

  Hello people.

  I'll try to explain exactly my problem even if it is a little difficult liitle!

  First of all, we are talking about a test environment that is installed in my house just for learning purposes.

  I am facing a strange my iscsi storage behavior when trying to join a second host to storage vmotion purposes. I was using an Esx host (3.5) for a while and I had no problem with the iscsi storage (I use an old pc with freenas on it). I must say that I got lucky, also, local sata controllers have been recognized so I could test the Storage Vmotion between two storages (Commons and iscsi) with success in this host.

  To continue to learn, I decided to also buy another pc to test Ha cluster, Vmotion, DRS. Unfortunately, I couldn't find the same material and who as well as sata controllers do not to be recognized, so I used a disk ata for OS and my intention was to use for the volume vmfs3 iscsi storage.

  In the first host esx I used, you can see 3 storage adapters: vmhba32 vmhba33& gt; Controllers local sata,34vmhba& gt; initiator iscsi software

  In the second esx host, you can see only the vmhba32- & gt; the iSCSI Software initiator.

  The first time everything worked ok, which means that I have attached iscsi storage in host the2nd by rescaning the vmhba and I was able to browse the datstore and see the contents of it, but it lasted only 10 minutes. Then suddenly I lost the connection to common storage to both hosts, I could see in the section maps of storage, but when I pressed update in the storage section, nothing happened and even when I tried to add it using the add storage I received the message usual "cannot read the partition table information. After being a little more careful I noticed that in the section storage cards, I could see the same vmhba34 in the two hosts with the same alias to the host of the first, and here's the strangest part, the situation I described above has been changing from time to time, which means that a few times I have seen the vmhba32 in both hosts and after some time vmhba34 in both hosts! (crazy)

  I took the big decision after playing with the partition table, without effect to use the ' vmkfstool - C vmfs3 s ' _free "_ / vmfs/devices/disks/vmhba32: 0:0:1" command

  in the second host, of course, I lost all data, but now with a simple refresh in this host, I was able to see the storage.

  Unfortunately, I still couldn't ' 1 host storage access and I published the same command "vmkfstool - C vmfs3 s"free"" / vmfs/devices/disks/vmhba34: 0:0:1 ""

  with only the change you see in bold. Accordingly, it was to see the storage after a refresh with free (1) name.

  Now he is currently working for 2 days with this way not recommended and what I would be really grateful if could help me clarify what exactly is happening.

  My main problem is that I am in front of a very unstable environment that might as well have the same unexpected problem in the future and I can't reformat always storage and loss of all virtual machines

  I tried to describe the best I could to this strange situation!

  Thank you for your time and any help or advice would be most welcome!

  I was looking for a similar solution. Seems to be the only iSCSI host is possible on freeNas. See here: http://apps.sourceforge.net/phpbb/freenas/viewtopic.php?f=53&t=403&sid=f4881e6e25e752e6ee8c6b0eae5887d3

  The only solution for learning seems to be to install the server ESX or ESXi in a virtual machine and then use iSCSI. Vm Instructions to complete the installation here (you must all PDFs 6) http://knowledge.xtravirt.com/white-papers/esx-3x.html or you can replace the opnefiler by the SUN's VM iSCSI. http://www.sun.com/storage/disk_systems/unified_storage/resources.jsp , you must use the vmware converter to convert the SUN's virtual to be used in ESX machine found this in a forum... but can not find more URL. I have not tried myself but, looking for just because you want to get a similar setup.

  Wolfgang

• "Not a valid error code" when you create a shared variable of data type custom

  I am trying to create a shared variable with a data type of a 2d double table. I created a custom control that contains a table with a numeric type for this 2d. Manager of distributed system v12 I select 'add a variable', then select 'of the custom control. Once select my control I get the following error: "invalid data type. You want to choose a different data type. Any advice as to why it doesn't work? Thank you.

  This seems to be recorded in the CAR #405941.  All this is a bit strange, but I'll try better possible workaround solutions I can.  I tested a large number of these myself, and here is what I found.

  1. make sure that the custom control you did was created in 2012 of LabVIEW or you save it in an earlier version.  If you save on an earlier version, you may also open the .ctl in LabVIEW 2012 and resave it (I needed to do).  I tried to create my own control in 2012, as well as save the control to a previous version, the two worked, but I don't end up with the same result (I don't understand this, but I wanted to mention it so that you know).

  2. it seems that you are able to make the variable shared by program by modifying the example of the community to adapt to your needs.  If you do not need to create many variables it may be the best option if it works for you.

  I would also try adding the variable of the LabVIEW project, you are working on that.  It wasn't a direct troubleshooting step but there are several ways of doing things in LabVIEW and, sometimes, one of them is working while the other does not.

  Edit: Example of community is here https://decibel.ni.com/content/docs/DOC-16863

• How to create disk shared across virtual machines on different hosts

  Hello

  We implement Oracle RAC on two virtual machines, one on each of the two armies for redundancy. For our installation:

  • The two ESXi hosts two SAN access a logical unit number.
  • Two virtual machines on the hosts must have access to a single virtual disk on this LUN (or unit number logic itself) at the same time.

  We tried the following:

  • Creation of a data store associated with the LUN, and then creating a new hard drive on each virtual machine using the same virtual disk on the data store. This operation failed because as soon as a virtual computer runs, the other virtual computer cannot run since the first has a lock on the file from the disk.
  • Creation of a new hard drive on the virtual machine through RDM. This operation failed because only the first virtual machine has this option of disc. Once the ROW has been assigned to the LUN, the other virtual computer cannot create its own RDM for the LUN.

  I'm learning just VMware so I can miss a fundamental method to accomplish this, or perhaps, it is not possible at all. You know a way to create the installer I described?

  Welcome to the community,

  I can not specifically help with the Oracle RAC, however, I would recommend that you take a look at MSCS documentation for how to configure shared disks. There is a difference in the way in which you have installed the VM, for example all VMs on an ESXi host or on different hosts. Please keep in mind that MSCS is a cluster without sharing, which means that only one node at a time has access to a shared virtual disc/RDM.

  André

  PS: I forgot to add the link: http://kb.vmware.com/kb/1004617

• Trying to create an invoice in figures

  I am trying to create an invoice for my painting business.  I received the money and now finished the work, so I would like to create a new invoice indicating "this is how it was", 'what you gave me first' and now 'it's how much you owe me

  Thank you!

  Ted

  I suggest to let Google help you.  I did a quick search and found a few examples here:

  http://computers.tutsplus.com/tutorials/create-awesome-invoices-in-numbers--Mac-52791

  Once you know what you want to post specific questions here.

• So im trying to create a new account

  If im trying to create a new Skype account and I meet all of the conditions on the registration page and then when I click on the button "I agreement and continues" it does not. Help me please it would be greatly appreciated

  Make sure that you have completed all the required fields (*). You can also try using a different browser.

• not possible to bind a variable shared via Ethernet network

  Hello!

  I have computer A and B with windows xp, sp3 and labview 8.6, professional edition. The two computers are in the ethernet network. I'd like to Exchange data between two applications of LV using shared variables. I create a shared variable (published network) on both computers.
  The problem is in the properties of shared variables not possible to bind the variable of the remote computer to the local computer. In the first step, there is even no possible to see any computer on the network. After the registration of the computer (Tools-> shared-> computer registry variable)
  I see the computer remote, but without any variable sharing.

  Do you have any idea how to solve this problem?

  Thank you for the answers.

  Hi ,

  Visit this link, maybe it can help you.

• Create 3D comments via Javascript

  Comments 3D can be interactively created within a 3D scene. Is there a way to create a 3D via Javascript comment? Something similar to the doc.addAnnot method, but for a 3D comment?

  I also posted this on the Javascript forum.

  Thank you.

  Replied here

• Cannot create Windows 8.1 System Image - fails with backup of the EFI

  I have problems trying to create an Image of my Surface Pro system.

  The program seems to work but then sends a message:

  The backup failed.

  It has been a failure in the preparation of the backup image of any of the volumes in the backup set. (0x807800C5)

  Additional information:

  The process cannot access the file because another process has locked a portion of the file. (0 x 80070021)

  The volume on which it backup fails is the first volume - the EFI system partition.

  The backup is set to save on my Dlink NAS, that works very well for my history file backups.

  I thought that somehow my anti-virus software may be to blame, but I'm not under any third-party anti-virus software.

  I also thought that if I started mode safe mode with networking that could avoid the problem, but the backup is not allowed to run in Mode without failure.

  Can someone point me in the right direction?

  Thank you

  Alan

  P.S. I think that I misunderstood the problem: If again, trying to backup, but instead using my SIN I plug a drive in the USB, then my backup work normally (and I can then copy / move the backup on the NAS server).  Looks like this might be a D-link problem maybe: D-link box is a DNS-320 ShareCenter.

  P.P.S.  Although the DNS-320 was purchased from a major last week retailer, the firmware was version 1.0 and 2 years.  Updated to v 1.01 seems to have solved the problem: at least for a PC.

  Hi Alan,

  As you said that the problem does not occur when you use a USB drive, the problem might be related to
  connection problems with NAS.

  I suggest you send the request in the Technet forum. Technical expertise to solve these problems is available in this forum.

  Check out the link to post your concern:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro#Forum=w8itpronetworking

  Thank you.