Deselect the Radiobutton

Similar Questions

• Deselect the option Scripting

  Is there a way to deselect objects from a selection using scriptin?  I have a VI and I want to delete all the code that is not controls, the block diagram of cleaning.  I thought I could perform a Select all on the block diagram, deselect the control terminals, then call a deletion, but I don't see a way to deselect objects.  Is it a flaw in scripts where it should be implemented?  Or have I missed?

  The only way I see to do this would be to get the selection list, index index using the list to remove controls, then make a new selection out of the remaining elements.

  My understanding is that a selection is just an array of objects of BD, then I don't know what a deselect would really also disconnected from the matrix.

• Don't deselect the option "Normal startup"

  Recently, I opened MS config and selected the upper circle (normal start-up) when it has been necessary to remove a Trojan horse on the hard drive.  Once it has been deleted successfully, I returned in MS Config to deselect this circle and return to the usual load of all startup items. Although the system allow me to select two items under this circle, I can't deselect the top circle. (When I first entered this file, none of the circles has been selected).

  Now, the startup is very limited and the screen display is the minimum resolution. I have to return the display whenever the computer is turned on. How can find us the usual loading programs and automatic adjustment of the screen high resolution?

  Like Windows XP and Trend Micro anti-virus. Any help would be greatly appreciated. Thank you.

  Hi SLWillig,

  1. What is selected now start mode? Is this Normal, Diagnostic or selective startup?

  I suggest you put the computer to Normal startup mode that will help you to load all the drivers of devices and services and also the startup items. Follow the steps below:

  a. Click Start and then click Run.

  b. type msconfig and click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  Reference link:

  How to configure Windows XP to start in a "clean boot" state - how to configure Windows to use a Normal startup state

  I hope this helps.

• When I type my laptop lock button deselects the document/email/browser, I am typing so that keeps me from typing until I click on new in the program.

  When I hit the caps lock key on my laptop it deselects the document or program that I am typing. For example, I will try and write 'Hi' and press 'H', so bad press Caps Lock shift, hit caps lock again and press 'i' but it won't type 'i' because as his deselcted the document or program. To solve this problem, I click in the document where I want to seize and exploit. It is not specific to a program in connection with a program her everytime I try and pass a letter uppercase and lower case and vice versa. I hope someone can help!

  Charlie

  When I hit the caps lock key on my laptop it deselects the document or program that I am typing. For example, I will try and write 'Hi' and press 'H', so bad press Caps Lock shift, hit caps lock again and press 'i' but it won't type 'i' because as his deselcted the document or program. To solve this problem, I click in the document where I want to seize and exploit. It is not specific to a program in connection with a program her everytime I try and pass a letter uppercase and lower case and vice versa. I hope someone can help!

  Charlie

  Hey Charliem177

  If you have the latest drivers and software from the laptop maunfacturer installed I suggest that, as it is a problem of keyboard with all the programs that you contact the manufacturer of the laptop or ask their support forums

  Walter, the time zone traveller

• How to deselect the image?

  Hello.

  If the block is selected, deselect the picture.

  Please tell me the JS code.

  Thank you.

  App.Selection = null;

• How do I deselect the pen tool so I can move on to other parts of my project

  How do I deselect the pen tool so I can move on to other parts of my project

  Click another tool. Hand the camera for example.

• Laber property of the RadioButton class

  I would like to learn use "Flash CS4 Professional 3.0 ActionScript Language Reference" and I beginning with this example, the question:

  Why the label property is not listed in the properties of the RadioButton class?

  The various components label property is inherited from the LabelButton class.  If you select "Show inherited public properties" in the beginning of this article, it will be included with the rest of the RadioButton and other inherited properties.

• Problem with the dialog box displayed when the RadioButton is selected.

  It is an application with 3 buttons button1, radio 2 and output key that uses System.exit (0)
  The problem is with the dialogs first two buttons

  1. I open the application

  2 Select a radiobutton, I get a dialog box, I click 'ok', dialog will, that's fine.

  3. I choose an another radiobutton button1 or button2, I get the corresponding dialog, BUT know I have to click 'ok' twice to keep it alive.

  I don't know what could be the problem, here is the code:

  package com.thinkingblackberry;
  import net.rim.device.api.system.Display;
  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.DrawStyle;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.component.PasswordEditField;
  import net.rim.device.api.ui.component.RadioButtonField;
  import net.rim.device.api.ui.component.RadioButtonGroup;
  import net.rim.device.api.ui.component.RichTextField;
  import net.rim.device.api.ui.component.Status;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.component.PasswordEditField;
  
  public class HelloWorldScreen1 extends MainScreen implements FieldChangeListener, DrawStyle {
  
      protected static final int RED = 0;
      MButtons fullscreen;
      //protected RadioButtonGroup rbGroup= new RadioButtonGroup();
      public HelloWorldScreen1() {
  
          final RadioButtonGroup rbGroup=new RadioButtonGroup();
  
          setTitle("Application");
  
          RadioButtonField rbField= new RadioButtonField("RadioB1"){
  
              protected void paint(Graphics g){
                  g.setColor(Color.ROSYBROWN);
                  super.paint(g);
              }
          };
          RadioButtonField rbField2= new RadioButtonField("RadioB2"){
              protected void paint(Graphics g){
                  g.setColor(Color.SIENNA);
                  super.paint(g);
              }
          };
          RadioButtonField rbExit=new RadioButtonField("Exit"){
              protected void paint(Graphics g){
                  g.setColor(Color.DARKSLATEBLUE);
                  super.paint(g);
              }
          };;
          rbGroup.add(rbField);
          rbGroup.add(rbField2);
          rbGroup.add(rbExit);
          add(rbField);
          add(rbField2);
          add(rbExit);
  
          rbGroup.setChangeListener(new FieldChangeListener() {
              public void fieldChanged(Field field, int context) {
              if (rbGroup.getSelectedIndex() == 0) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
  
              }
              else if (rbGroup.getSelectedIndex() == 1) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
              }
              else if(rbGroup.getSelectedIndex()==2){
  
                  System.exit(0);
              }
  
              }
          });
  
      }
  
      public HelloWorldScreen1(long arg0) {
          super(arg0);
      }
  
      public void fieldChanged(Field field, int context) {
  
      }
  
  }
  

  I guess the event changed field is called twice, once deselection button1 and once to select button2. you pay your processing logic to account for this.

• When we choose the radiobutton control should display the drop-down list of choices...

  Hello

  Can u help me pls how to get the drop-down list option when we choose control radiobutton in the same screen.

  When deselect us it, he must hide the drop on the with on screen no matter what accent...

  Thanks in advance...

  u r Correct.

  Acutally we work on popupscreen with transparency.

  I use the 4.3 sound support for setmargin(4.5 doesn't).

  I went through the doc 4.5 Finally I got the result.

  I need to set the drop down just below the dropdown list how can I without no hardcode... pls let me know...

  now iam using setmargin (encode);

  If you have any advice that can help me in pls reffer me programming skills.

  I wil get u was pushing for the next...

  Thank you for your way of orientation...

• List CellRenderer select / deselect the event handler?

  Hello dear developers. Sorry to create new post, but I add almost same question to 2 already open questions and got no results so I hope that more people will see and I guess finally getting the response. Well. If my CellRenderer contains several text fields with formats of different text as well as a few display objects and I need to turn they depends on the State. How do I get inside the CellRenderer class an event that cell is selected or deselected in order to transform the components?

  Hey,.

  There is a protected method called setState() which I think is called whenever the State of the cell is changed. you might give that a try. Here is an example:

  package
  {
      import qnx.ui.listClasses.CellRenderer;
      import qnx.ui.skins.SkinStates;
  
      public class CellRend extends CellRenderer
      {
          public function CellRend()
          {
              super();
          }
  
          override protected function setState(state:String):void
          {
              super.setState(state);
  
              switch (state)
              {
                  case SkinStates.UP:
  
                      // do ur up state here
  
                      break;
  
                  case SkinStates.SELECTED:
  
                      // do ur selected state here
  
                      break;
  
                  default:
  
                      break;
              }
          }
      }
  }
  

  hope that helps. Good luck!

• Pressing forward slash (deselect the active photo) instead of the slash reverse (before and after changes)

  In module development, during editing, I sometimes make the mistake after pressing slash bad key and the end upward with the message no. Photo selected instead of "before" notice I wanted. If I have similar photos, find it me difficult to recover it - when I return to the library module to try to find my picture, it's been deselected, of course.

  Any ideas?

  Thanks in advance - Helen

  As soon as you realize that you pressed the wrong key, you can press Cmd/Ctrl + Z.

  This will cancel what you just did, which is bad press.

• Deselect the option after that move will remove the content!

  Hello!

  I have a huge problem with the Selection tool and I need to know how to solve this problem, because it totally destroyed my workflow. (Photoshop CS6)

  If I move the contents of a selection and deselect an item, it removes the part that I've deselected. How can I disable the which?

  I want photoshop just to deselect my selection without deleting anything, so I can continue to go the rest of my selected contend.

  Greetings Legolars

  
  Edit:

  How to reproduce the error:

  1. Select a part of your image

  2. use the tool move and move the selected content

  3. switch back to the selection tool and now start deselect items in the selection

  3.1. This will remove her are deselected, which I don't want to happen!

  Well, that makes sense, and I can see how that would be frustrating.

  As is the way recommended for the tool to operate, I can only offer you with a bit of a hack:

  If you temporarily add to your selection, and then remove your new selection, as well as the rest of the selection, it won't clip pixels wide.

  PS: this GIF is animated.

  

• Reorganization of the RadioButton in RadioGroup

  Hi all
  
  I created a RadioGroup.It has 3 buttons. The names of these 3 buttons come from FND_NEW_MESSAGES.
  
  Followign are the things that I configured in RadioGroup definition:
  
  Lookup view definition: xxx.oracle.apps.asn.common.customer.poplist.server.xxCtctCreatePGRadioVO
  
  Choice list view instance: xxVO
  
  Drop-down list Display attribute: message_text
  
  List drop down attribute value: message_name
  
  The values for this VO database looks like this in the Toad (Database)
  
  Select message_name,
  MESSAGE_TEXT
  of fnd_new_messages
  where message_name as "XXCONT % ADDR %.
  message_name order
  
  
  RAdiobutton1 value1
  RadioButton2 value_2
  RadioButton3 value3
  
  But when the Page is loaded, the VO is executed and option buttons are displayed in the following order
  
  RadioButton2 value2
  RadioButton3 value 3
  RadioButton1 value1
  
  
  I want the buttons to display in the way that watching ln database. I don't know why the order of the values are changed when I have loaded
  
  
  
  
  
  VO Code:
  
  <? XML version = "1.0" encoding = "windows-1252'?" " >
  <! DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd" >
  
  <!-$Header: PaymentTermsVO.xml 120.8 03/07/2006 16:02:57 atgops1 noship $-->
  
  < ViewObject
  Name = "XXXVO".
  OrderBy = "CSA 2.
  BindingStyle = 'Oracle '.
  CustomQuery = 'true '.
  RowClass = "oracle.apps.fnd.framework.toolbox.poplist.server.XXXVORowImpl"
  ComponentClass = "oracle.apps.fnd.framework.server.OAViewObjectImpl"
  FetchMode = "FETCH_AS_NEEDED."
  Passivation = 'None '.
  UseGlueCode = "false" >
  < SQLQuery > <! [CDATA]
  Select message_name,
  MESSAGE_TEXT
  of fnd_new_messages
  where message_name as "XXCONT % ADDR %.
  message_name order
  []] > < / SQLQuery >
  < DesignTime >
  < name Attr = "_isCodegen" Value = "true" / >
  < name Attr = "_isExpertMode" Value = "true" / >
  < name Attr = "_version" Value = "10.1.3.41.57" / >
  < name Attr = "_codeGenFlag2" Value = "Access" / >
  < / DesignTime >
  < ViewAttribute
  Name = "message_name.
  IsQueriable = "false".
  IsPersistent = "false".
  IsNotNull = 'true '.
  Precision = "30".
  Type = "Java.lang.String"
  ColumnType = "VARCHAR2".
  AliasName = 'message_name.
  Expression = "message_name.
  SQLType = 'VARCHAR' >
  < DesignTime >
  < name Attr = "_DisplaySize" Value = "30" / >
  < / DesignTime >
  < / ViewAttribute >
  < ViewAttribute
  Name = "message_text.
  IsQueriable = "false".
  IsPersistent = "false".
  IsNotNull = 'true '.
  Precision = "80".
  Type = "Java.lang.String"
  ColumnType = "VARCHAR2".
  AliasName = 'message_text.
  Expression = "message_text.
  SQLType = 'VARCHAR' >
  < DesignTime >
  < name Attr = "_DisplaySize" Value = "80" / >
  < / DesignTime >
  < / ViewAttribute >
  < / ViewObject >

  Double wire

  Redordering of RadioButton in a RadioGroup

  Thank you
  AJ

• How to deselect the highlight tool?

  I pointed out in my document, but now he had to stop using this tool but there seems to be no way to do it. I went to edit (deselect all), but it did not work. I tried reselect tool highlighting thought that it would be clear but it only changed it. Can someone please give me some advice on this? (I don't have time to waste on a highlighting tool)

  Hand tools - Select & Zoom - tool

  It is usually also on the toolbar. If not, you can add it.

• I deselected the menu bar, but the firefox button does not appear

  Hi, I use 28.0a1 build (2013-11-22)

  When I installed first the firefox button has been working and visible and I could hide and expose via the right-click uncheck the option bar menu7. This morning updater.exe ran and at firefox Startup button disappeared and not re appear even if the menu bar is unchecked.

  Kind regards

  There are changes quite a lot more than just the Firefox button.

  Every night has recently moved to allure Australis previously seen in the UX builds.

  • https://blog.Mozilla.org/UX/2013/11/australis-is-landing-in-Firefox-nightly/