How can I see who is connected to my wifi network?

Similar Questions

• How can I get my wireless printer to my wifi network?

  As the HP Installation Wizard does not work with the Mavericks, is there another way to get my printer wireless connected to my wifi network? This printer (HP Officejet Pro 8000 A809) works well with the Mavericks on my old wifi network. But my DSL provider has recently installed a new router, so I have a new wifi network which works fine with everything else.

  I was able to get my two Airport Express to join my new network, using Airport utility, but I'm stumped as to how to get my printer to join the new network without the help of the HP installation wizard.

  Following the advice of Shlomi, I managed to reset my printer so that it now appears in my list of networks wifi under devices, such as hpsetup. But I got. Any help would be more approeciated.

  Bruce777 solved this problem for me, thanks Bruce! My printer now works perfectly on my new wifi network!

  Bruce instructions, for anyone else having the same issue:

  -delete all printers already implemented

  -Rub old hp software and updated software for the hp 2.8 drivers

  -Unplug the usb cable from the printer if you have connected

  -restore the network printer hpsetup (hold down the power button / stop and press the button x 2 network and then cancel 3 x, release power button).

  -Print the wireless network test report (hold down the button to network and update support 2 x). Check the ssid network name is hsetup

  -arrived in sys prefs > network and change the mac to hpsetup wireless network

  -go to the sys pref > print scanning

  -Add the HP 8000 printer

  -Click the supplies button and options and click on the printer to show Web page

  -Click on the Networking tab > wireless in the left pane > start networking wizard and change the network of hpsetup to your network

  -finishing (this page may freeze.  Close the browser)

  -Return to the sys prefs and change the network wireless to your networt

  -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

  -go to system prefs > print scan > select your printer > options & supplies > see the printer Web page > network info (check ssid and compare it to the wireless network test report)

  -try to print something on your printer.  It might take a bit of time first impression.

• How can I allow a standard user to add wifi networks

  I have a standard user with a MacBook Pro running Mac OS El Capitan. She must be able to connect to Wi - Fi networks when you are away from the office, but I don't want to give him an admin account. Currently, the MacBook Pro requires admin approval every time

  How can I set this up so she can add wireless accounts while a standard user.
  Thank you

  I don't think it's possible. You will need to give its administrator privileges, even temporarily, or go with it at each location and add them to it.

• How can I see who the user did what?

  Hello world

  can someone tell me in what newspapers I see which user did what? If there is a possibility on vSphere client/webclient would be interesting also...

  I want to see for example who cloned or change the hardware on a virtual computer.

  We use 5.1 with vSphere Center essentials ESXi.

  Our Active Directory is connected to VMware and each user uses its AD account.

  Best regards

  Marc

  There are a few places you can check... you can see the tab tasks and events for the guest himself.  You can extend the recent events and tasks by changing the settings of the customer in the vSphere Client. In addition, you can check the prompt vmware.log files and, finally, vCenter logs.

• How can I see who cancelled a task?

  The heart shows me that a job has been canceled.

  Is it possible to see which cancelled the task?

  Hi Fredbloggs,

  There is no functionality in the Core Dell AppAssure, to follow, under which account of changes have been made.

  Please submit your feature request in this regard: en.community.dell.com/.../19596918

  Thank you

  Anton Kolomiiets.

• E4200V2, how to see who is connected to WiFi?

  Hi, I just replaced a D-Link with the E4200V2.

  On the D-Link, it was easy, I can see who is connected to the radio.

  But I can't figure out how to see who is connected in WiFi on the E4200?

  I run several access points in my house, and I make sure they all work.

  If I don't see who, if anyone, is connected, I don't know if the WiFi on the E4200 works.

  I do not use the E4200 DHCP server, the DHCP client table is not useful.

  How can I see who is connected to WiFi using the radio?

  P.

  This is part of the function of wireless MAC filtering.

• My iPad was stolen and exchanged by another how can I know who is using mine

  My iPad was stolen and exchanged for another how can I know who is using it?

  You can use Find iPad to see the location of the device if it is connected to the internet

  Do NOT you go after him - give the information to the authorities

  If you have an iPad that was initially not yours - you can enter - in other words - past the lock of activation?

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• How can I see what devices are "authorized" computers

  Is the iPad and iPhone connected by a common appleID included automatically?

  How can I see what other devices are 'allowed' and could be deleted, for example, a computer has been replaced and the device wasn't "deauthorized" before you replace and may not be available.

  1 iOS devices do not use the iTunes Store authorizations.

  2. a list is not available at your end. If you are off permissions, click here for more information.

  (140367)

• How can I install my laptop to connect to a WiFi network instead of my default dial-up line?

  Hello...

  I have for the implementation of many laptops for a Webinar tomorrow morning; but at least one of these computers keep trying to connect to its range of dial-up default instead of local WiFi Hotspot.

  How can I get this laptop to connect to the WiFi network?  It's an operating system XP, with IE-8.

  Thank you!

  edv7028

  Hey,.

  You can see the article below with the instructions shown on the definition of a default network on your XP machine.

  http://support.MI.RAS.ru/wireless/windows_xp/English/

  I hope this helps.

• How can I see the cluster move in Disk Defragmenter, when I run the program

  How can I see the clusters move in Disk Defragmenter when I run on my old computer I could see and my step dad had told me that anyone who has a computer can display when they run this program

  Due to popular demand, is no longer a part of Disk Defrag in Vista.

  Disk Defrag in Visa works quietly in the background.

  People complained the old Disk Defrag in XP style interface, as they had to do on her computer, not to watch the little squares moving.

  You can use 3rd party defragmentation products:

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  http://www.SnapFiles.com/reviews/IObit-SmartDefrag/iobitsmartdefrag.html

  http://www.SnapFiles.com/reviews/Diskeeper_Home/Diskeeper.html

  See you soon.

  Mick Murphy - Microsoft partner

• How can I check the internet connection?

  How can I check the internet connection after the launching application?

  Method or property with the value true or false.

  Thank you!

  You don't have to see the 2nd answer, discuss blackberry.system.hasDataCoverage

• How can I keep strangers to connect to my network or router?

  wireless router...

  How can I keep strangers to connect to my network or router?   I continue to see one come like Belkin.678 and when I right click on it the only option is auto connect...

  How do you know that they are connecting to your wireless network?

  Where are you looking?

  You should consult your routers manual and make sure that wireless security is put in place.

  Use WPA2.

  Looks like you're just view the wireless networks that are available in the range of your router.

  It's normal.

• How can I see the size of the file?

  How can I see the size of the file in LR CC? I can see the pixel size, I see millions of pixels (interested in MP?). To see the size of the file, I have to 'show in Finder '. That s annoying.

  Thanks in advance

  Uwe

  Bob Somrak says:

  I'm sorry that I have implied by using the 'Limit of the file size' option to export.  I never use (probably rarely) this option.  I wanted to suggest you to use the option of resizing and set the pixel dimensions to limit the size of the file and the quality level.

  Yes, I've never used 'File size limit' because I know better. IMHO, this is an Adobe option could remove and do more good than harm. We have seen many messages here from users who are confused when it doesn't do what they expect.

  Bob Somrak says:

  Too, I think it would be easy to implement the ability to see the size of the file in Lightroom but see no advantage.  It does not provide any information whatsoever on what the derived file size will be.

  It is of little interest to the 'original' camera files imported into LR. But it is useful to review export and "Change in the PS" files for all of the reason fotoroeder and I have just described.

  The bottom line is that it can't hurt and it can be made an option to preferences for "Advanced" users to eliminate the confusion." It goes same for IPR display and the color profile, which is very useful for managing the resized image files to be used with a program such as InDesign layout. I currently have to use Adobe Bridge for this purpose, but LR to create and organize the files of components. So it forces me to work inefficiently. It would be really beneficial if LR and InDesign could be integrated to work similar to the LR book module together... but that's just a dream.

• How can I see external drives on the sierra?

  How can I see external drives in sierra?

  Menu Finder Preferences... > General