design of level control model

can someone help me to make the model of water level control in the labview platform.

Thank you

Serkan

I thank the President, can any suspicion on the model of level control you can suggest to do.

Regarding

Serkan

Tags: NI Software

Similar Questions

Satellite M60-135: no function Sound Mixer level controls to "CD player".

Hallo,

On my Satellite M60-135 (Toshiba original Setup) Windows XP Sound Mixer shows a slider of level setting for the drive but it doesn t work.
I can drag the level control or may mark the mute control for CD player, but it has no effect.

I tried to disable digital playback in the device driver for the DVD-RAM device but it doesn't change anything on the level control.

Is this a general problem of the Satellite M60, is a specific defect of my M60 or can it be fixed by updating all the drivers?

Thank you for any suspicion.

Wolfgang Nohl

Hello, Wolfgang

Believe me that this is not a problem or any kind of fault. As you know CD players used on desktop computers have audio out port. This level control Configurator will be used just for them. Portable CD or DVD player has this audio separated on the port and that this option cannot be used. The same situation is on my Tecra M1.

In addition, it is a tool of Microsoft and Toshiba has no influence on it. As you know there is no OS designed only for laptops and this option is that it can not be used.

Good luck and have lots of fun with your M60. It's a great unit!

Buffer could replace the queue in the design of producer/consumer model

Hello

I have a question to which the task of buffer to store the data and the queue is also of the same thing so we could use the inplace queue buffer in a design of producer/consumer model.

No, these examples of buffer not almost equal to a queue, and never "replaces" queue at the producer/consumer.

The advantage the most important of the queues for the producers/consumers (which none of the other mechanics buffer sharing), it is that it works activities to warn the reader that the data is available. So if you would simply replace the queue by mechanics of tampon too developed that you have attached to your last post, you will lose a large part of the object using producer/consumer.

Thus, to compare the two mechanics:

-Tail works activities, while the example of the buffer is not.

-Tail must allocate memory during execution if several items are written in that corresponding queue. This also applies to the buffer (must be resized).

-Given that the buffer is actually simply a table with overhead, memory management becomes slow and messy with the increase in fragmentation of memory. Queues to play much better here (but have their limitations, there also).

-Overload of the buffer (the table manipulation) must be implemented manually. The queue functions encapsulate all the necessary features that you will need. So the queues have a simple API, while the buffer is not.

-Given that the buffer is simply a table, you will have a hard time sharing the content in two parallel running loops. You will need to implement an additional charge using data value references to manage the buffer or lose a lot of memory using mechanics as variables. Lose the memory, you will probably encounter racing conditions so don't think not even on this subject.

This led to four '+' for the queue and only a single point where 'buffer' is equal to the queue.

Hopefully, this clears things up a bit.

Norbert

Should I use the design of producer/consumer model (Instead of Globals)?

Hello everyone.

I have a request including several loops in it. A loop reading data series and he analyses for use in the other loops, another loop acquires via DAQmx data and performs calculations on it for use in other loops, the other formats the data from two loops and poster and one last test data. I was wondering if this is a good candidate for the design of producer/consumer model.

For now, I use global variables to send data from the series and DAQmx loops to other loops. I use motors of the action for the different parts of the program that should be used everywhere, as the serial port. The test loop needs than the most recent data to run his test.

Thanks for your suggestions!

The short answer is Yes. If nothing else using queues to pass data will allow your various loops inactive if no data is present. By using globals your curls must continuously survey to see if the data has changed. You always are beter off if you can make your request, driven by events rather than to use the polling stations.

(ACM) CDC ABSTRACT CONTROL MODEL

AFTER CONNECTION MY NOKIA N900 TO MY PC, IT SAYS FOUND NEW HARDWARE, THEN TURNS TO INSTALL REQUIRED DRIVERS EXCEPT 1 THAT SHE CANNOT FIND THE REQUIRED DRIVER, I CAN'T TO LACATE DRIVERS OR INFORMATION ANYWHERE FOR, CDC ABSTRACT FOR THIS PROBLEM, THE REQIURED DRIVER CONTROL MODEL (ACM) OF IDEAS. I AM RUNNING WINDOWS VISTA BUSINESS WITH ALL UPDATES AND SERVICE PACKS

http://www.Nokia.com.au/get-support-and-software/product-support

Try to contact the Nokia Live Support.

http://discussions.Nokia.com.au/discussions/

Above link is of Nokia's Discussion groups.

They will help.

See you soon. Mick Murphy - Microsoft partner

Root access level control
In Flash, you can use "_root." to access the top-level items. For example, in Flash if you create a textinput and a new class object function, I can say, _root.textinput.text as below

class MyClass
{
public MyClass()
{
_root. TextInput.Text = "haha."
}

}

So my question is how can I access level controls root in Flex?
I have a list control named, shoppingCartList and I have a newly created class object called shoppingCartObject that will be created at the beginning. And in my class, I have a function which should something like _root.shoppingCartList.dataProvider = product_ary. But in Flex there is no variable of that type as "_root". How can I achieve this in Flex?

Thank you

Example:
Application.application.shoppingCartList.dataProvider = product_ary;

You need to import mx.core.application.

Tracy

The stress level control

Oracle Version = 10g

---------------------------------------

Hi gurus

I want to put control of database level 1 and do not know how to reach my goal and appreciate if someone help out me. Thank you

Explanation of the problem

I have 3 tables and inserting the data steps are:

First data is inserted in table 1

Second, data are inserted into the table 2

Thirdly, the data is inserted in the table 3.

Now, I want to apply some kind of check or constraint on table 3, this constraint or check should not accept value if the value entered is already exist in table 1 and table 2.

So far, I've done something as below:

Examples of data

CREATE TABLE app

(app_id number 4

) ;

ALTER TABLE app add a PRIMARY KEY

(

app_id number 4 CONSTRAINT app_app_id_fk REFERENCES app (app_id)

)

;

CREATE TABLE next_app

(

next_id PRIMARY KEY number 4,

app_app_id number 4 CONSTRAINT app_app_id_fk REFERENCES app (app_id)

) ;

----------------------------------------------

CREATE TABLE hear

(

hear_id PRIMARY KEY number 4,

mix_fk number 4

) ;

Hear of the ALTER TABLE ADD CONSTRAINT app_app_id_fk1 FOREIGN KEY

(

mix_fk

)

REFERENCE app

(

app_id

)

;

Hear of the ALTER TABLE ADD CONSTRAINT next_app_app_id_fk2 FOREIGN KEY

(

mix_fk

)

REFERENCES next_app

(

app_app_id

)

;

Error on the last statement

Error at startup on line 40 of the order:

ALTER TABLE hear

ADD CONSTRAINT next_app_app_id_fk2 FOREIGN KEY (mix_fk) REFERENCES next_app (app_app_id)

Error report:

SQL error: ORA-02270: no unique or primary key corresponding to this column list

02270 00000 - 'no matching unique or primary key to this list of columns.

* Cause: A REFERENCES clause in a CREATE/ALTER TABLE statement

gives a list of columns for which there is no unique or primary match

key in the referenced table constraint.

* Action: Find the names of correct column using the ALL_CONS_COLUMNS

display catalog

Concerning

Muzz

Here is the implementation of weird foreign key for your data model weird that idea is that hear_app contains app_id PK who hear references then by FK. Hear_app table is managed only by the next_app table triggers. In other words next_app reference app table and hear the table reference hear_app. I think this works, but also may not work for some reason, I don't see at the moment (mind asleep).

-- objective is that when entered value in hear.app_id column then
-- this value should exist in both tables column app.app_id and next_app.app_id
create table app(
  id number not null primary key
)
;
create table next_app(
  id number not null primary key,
  app_id number not null referencing app(id)
)
;
-- integrity helper
create table hear_app(
  app_id number not null primary key
)
;
create table hear(
  id number not null primary key,
  app_id number not null referencing hear_app(app_id)
)
;
create or replace
trigger next_app_trg
before insert or update or delete on next_app
for each row
begin
  if inserting then
    begin
      insert into hear_app (app_id) values (:new.app_id);
    exception when dup_val_on_index then
      null; -- fine
    end;
  elsif updating and :new.app_id != :old.app_id then
    update hear_app set app_id = :new.app_id where app_id = :old.app_id;
  elsif deleting then
    delete hear_app where app_id = :old.app_id;
  end if;
end;
/

-- test

insert into app (id) values (1)
;
insert into app (id) values (2)
;
insert into next_app (id, app_id) values (1,1)
;
insert into hear (id, app_id) values (1,1)
;

select * from app
;
select * from next_app
;
select * from hear_app
;
select * from hear
;

-- this failes because there is not app_id with value 2 in table hear_app
insert into hear (id, app_id) values (2, 2)
;
-- let's add app_id 2 into table next_app (trigger adds also hear_app)
insert into next_app (id, app_id) values (2,2)
;
-- this will be successful now
insert into hear (id, app_id) values (2, 2)
;
select * from hear
;

drop table hear purge
;
drop table next_app purge
;
drop table hear_app purge
;
drop table app purge
;

Table APP created.
Table NEXT_APP created.
Table HEAR_APP created.
Table HEAR created.
Trigger NEXT_APP_TRG compiled
1 row inserted.
1 row inserted.
1 row inserted.
1 row inserted.

        ID
----------
         1
         2

        ID     APP_ID
---------- ----------
         1          1

    APP_ID
----------
         1

        ID     APP_ID
---------- ----------
         1          1

Error starting at line : 62 in command -
insert into hear (id, app_id) values (2, 2)
Error report -
SQL Error: ORA-02291: integrity constraint (JARKKO.SYS_C0011343) violated - parent key not found
02291. 00000 - "integrity constraint (%s.%s) violated - parent key not found"
*Cause:    A foreign key value has no matching primary key value.
*Action:   Delete the foreign key or add a matching primary key.

1 row inserted.
1 row inserted.

        ID     APP_ID
---------- ----------
         1          1
         2          2

Table HEAR dropped.
Table NEXT_APP dropped.
Table HEAR_APP dropped.
Table APP dropped.

edited: BEWARE this is not the correct solution which is marked as.

How to record Design, RDBMS level Sites in the DefaultRDBMSSites file

I want to follow the advice to file system objects in a central location, so they can be kept for all designs in SVN. I created a few additional sites and they are stored in the folder of design, not the default folder of system files. How to create sites in the default sites folder?

How to create sites in the default sites folder?

administration site dialog box has 2 tabs - 'Current design' and "Edit the external file with sites" - the latter can be used to add/delete sites of defaultRDBMSSites.xml

Changes are not applied to open drawings - you must close them (even if the design is empty) or restart the Data Modeler.

Sites added to the defaultRDBMSSites.xml file are always copied in level design file in 'design save' operation then you can always move your design to another location.

Philippe

design of different control break

Hello
I'm having a problem of designing a report in apex 4.0. Is there a way to merge cells of different lines with the same information? Control breaks are almost what I want, but I need the information in the line and not in the header. Tables below show what I want to achieve, I'm grateful for any advice.

Suppose I have a table like this

Name | Order | Amount
-----------------------
Jeff |   1   |    100
-----------------------
Jeff |   2   |    200
-----------------------
Jeff |   3   |    150
-----------------------
James|   1   |     50
-----------------------
James|   2   |    100

I want it to look like this:

Name | Order | Amount
-----------------------
     |   1   |    100
     ------------------
Jeff |   2   |    200
     ------------------
     |   3   |    150
-----------------------
     |   1   |     50
James------------------
     |   2   |    100

Hi Chris,

I have created a report model "Named column (model line)" through shared components. In this regard, I put the setting template line 1:

<tr style="background-color:pink">
  <td style="background-color:lightgreen; border:1px solid #285577; text-align:center;" colspan=1 rowspan=#7#>#1#</td>
  <td class="t12data">#2#</td><td class="t12data">#3#</td><td class="t12data">#4#</td><td class="t12data">#5#</td>
</tr>

with a PL/SQL condition of:

'#COL1#' IS NOT NULL

and the parameter Row 2 model:

<tr style="background-color:lightblue">
  <td class="t12data">#2#</td><td class="t12data">#3#</td>
  <td class="t12data">#4#</td><td class="t12data">#5#</td>
</tr>

The SQL code for the report is:

SELECT A.COL1,
A.COL2,
A.COL3,
A.COL4,
A.COL5,
A.ITEM_NUMBER,
(SELECT MAX(B.ITEM_NUMBER) FROM VLAGTEST B WHERE B.COL1 = A.COL1) ITEM_COUNT
FROM VLAGTESTOUTPUT A

Andy

Abstract control model (SAMSUNG GALAXY)

CONNECT MY SAMSUNG GALAXY S TO MY PC, IT SAYS NEW HARDWARE DETECTED, I CAN'T HAVE TO LACATE DRIVERS OR INFORMATION ANYWHERE FOR THIS PROBLEM, THE REQIURED DRIVER IS FOR, MODEL DCC CONTROL ABSTRACT (ACM). I AM RUNNING WINDOWS VISTA HOME 32 BIT WITH ALL UPDATES AND SERVICE PACKS

Connect with Samsung Kies
Ensure that Samsung Kies is installed on your PC.
Support for Galaxy S
http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=1903&prd_mdl_cd=gt-I9000HKDXEU&prd_mdl_name=gt-i9000&srchword=Galaxy+S

There is a video "connect your Galaxy S to your PC.
Read the user manual 'PC connection '.

I hope I could help

Brake on another level control

Hello
I am currently working on an interactive report in the Apex.
I don't know how to explain my problem then that is clear, but I'll try to make it as clear as possible.

Say you've got depending on the situation:
Break 1 control break2, command break 3
Task | Subtask
1      | 1
1      | 2
2      | 3
2      | 4
I would like to add another 'jump of control' on the subtask column, but if I could do it the normal way, I would get:
Control the break 1 break2 command, control the break 3, subtask 1
Task
1
Control the break 1 break2 command, control the break 3, 2 the subtask
Task
1
Control the break 1 break2 command, control the break 3, 3 the subtask
Task
2
Control the break 1 break2 command, control the break 3, 4 the subtask
Task
2
However, I wish it were as follows:
Break 1 control break2, command break 3
Task 1
Subtask 1
Subtask 2
Task 2
Subtask 3
4 the subtask
Where subtask is actually not a break of control (I guess), but more like another table with information about subtasks (even if all the data comes from only 1 table). How would I be able to do this?
I am currently working with the test environment Oracle supplied us, because we test if we can use APEX in our company.
The version is Application Express 4.2.3.00.08 and it is running on Oracle 11 g.

If you don't know or you need more information, please ask.

Thanks for your replies!
Greetings,
NDG

NDG123 wrote:

Hello

I am currently working on an interactive report in the Apex.

I don't know how to explain my problem then that is clear, but I'll try to make it as clear as possible.

Say you've got depending on the situation:

Break 1 control break2, command break 3

Task | Subtask

1      | 1

1      | 2

2      | 3

2      | 4

I would like to add another 'jump of control' on the subtask column, but if I could do it the normal way, I would get:

Control the break 1 break2 command, control the break 3, subtask 1

Task

1

Control the break 1 break2 command, control the break 3, 2 the subtask

Task

1

Control the break 1 break2 command, control the break 3, 3 the subtask

Task

2

Control the break 1 break2 command, control the break 3, 4 the subtask

Task

2

However, I wish it were as follows:

Break 1 control break2, command break 3

Task 1

Subtask 1

Subtask 2

Task 2

Subtask 3

4 the subtask

Where subtask is actually not a break of control (I guess), but more like another table with information about subtasks (even if all the data comes from only 1 table). How would I be able to do this?

I am currently working with the test environment Oracle supplied us, because we test if we can use APEX in our company.

The version is Application Express 4.2.3.00.08 and it is running on Oracle 11 g.

If you don't know or you need more information, please ask.

Thanks for your replies!

Greetings,

NDG

Is there an obligation to use the other interactive report features that out-of-control? If this isn't the case, then a standard report with a custom report model is a much better way to create a complex report layout.

Design in Adobe Muse model

Hey, I recently downloaded a model Adobe Museum of design. In the example, the designer creates, he / she used a still photo in the background. I used my own photo background HLA now but when I saw it, there is an automatic slide action that happens in my design. I want the image to be fixed, as in the example. How to make this change?

Check this screenshot which shows where pinning and scrolling of movement options are: http://prntscr.com/39sjrh

See you soon

Parikshit

Cannot display the properties of Amplitude and level controls

I'm new to LabVIEW and just installed ver 8.6 on my machine. When I open the TutorialGenAnalyzeDisp1.vi, the run button is disabled. When I double click on the Amplitude and measures of level, I get a dialog box says "cannot display properties. If I click on the run button, I get an error message: "errors of block diagram / Subvi 'Amplitude and level measurements': Subvi is not executable."

I have the LabVIEW base development system. Is it possible that I don't have that element in my library or an installation problem? I look forward to re - install LabVIEW. It took over 3 hours to install.

Hi jdai

The Amplitude and the level of the Express VI measures is included in LabVIEW complete edition and professional development systems, not in the database. So, as you think, you do not have some of the elements necessary for the execution of this VI.

Best regards

David

NISW

device does not appear on the list of devices or parental control - model EA2700

My son's iPod caused the parental conrols system crash. For some reason any his ipod has shown three times on the list of devices. So, I hit the 'X' on the list of devices when it has been disconnected to remove it from the list. Now, I can't it appears below the list of main devices or parental control. I can see the unit if I look under the DMZ/DHCP client table. I can even see it under the access as a guest, but it will not show upward under a regular connection, so I can't control it how do I get it to show up again?

The ipod must log on again, then it should appear.

I usually reserve an ip address for these devices in a dhcp reservation and give it a name in the reserve for the devices shows always like something that I can recognize because it can appear as just "peripheral network' for a name.

INTERFACE with the waterfall design: how 2 controls arranged in a single line?

Hi all

Cascade using I can easily drag and drop the control in the definition of qml and can preview visually. But it seems to draw the controls row-by-row. How do control the position absolutely on one line?

In this case, you must use the DispositionAbsolue as the layout for this container, but note that you must specify the coordinates for each control. See the example below to place two buttons on the same line:

import bb.cascades 1.0
import bb.system 1.0

Page {
    Container {
        layout: AbsoluteLayout {}

            Button {
                id: btnConn
            objectName: "btnConn"
            text: "Connect"
            preferredWidth: 330
                layoutProperties: AbsoluteLayoutProperties {
                    positionX: 44
                    positionY: 260
                }
        }

        Button {
            id: btnDisc
            objectName: "btnDisc"
            text: "Disconnect"
            preferredWidth: 330
                layoutProperties: AbsoluteLayoutProperties {
                    positionX: 394
                    positionY: 260
                }
        }
    }
}

I hope this helps.

design of level control model

Similar Questions

Maybe you are looking for