Designer / workflow ideal photographer

Similar Questions

• Where the eSign workflow-designer"mentioned in several press releases in November 2015 and earlier?

  Hello

  I'm working on a project of internal work that I would like to integrate eSign in. It is a .NET based, and looking through the documentation business solution there are several mentions of a designer workflow, I would use to reduce the amount of required custom programming. Where is he?

  Hi Darshan,

  Workflow designers are available in subscription level services E-Sign company. If you have this level of the account, please inbox me so that I can check further.

  Kind regards

  -Usman

• vCAC Design Center - error creates a custom workflow

  I've implemented a very small vCAC lab environment and I try to play with custom in the vCAC designer workflows.  I installed the client, launched and clicked on load.  I select WFStubBuildingMachine, double-click the construction of machine, then a custom code.  I then drag an InvokeVcoWorkflow object in the custom code section and attach it to the original node.  When I click on the selection of a vCenter Orchestrator workflow button, I'm greeted by an error occurred during the processing of this application and I can't go any further.  The only other mistake that I see at the bottom where it is said:

  Value for a required activity argument 'VirtualMachineId' has not been provided.  I though that was passed in by default, and I don't see anywhere to add it.  I am not finding anything in my research, so I am at a loss here.

  Any help would be appreciated.

  Thank you.

  If you run the designer as an administrator, it should work fine.

• VCAC designer can work after the installation of the vCO customizations?

  I created a few customizations of the initial workflow using the VCAC Designer.  A BuildingMachine who called a couple vCO workflows with certain properties, while the MachineProvisioned stub uses the InvokePowershell action to manage some SCCM after provisioning tasks for Windows machines.  Now I work with VCAC plugin and you have run the customization of the vCO Install workflow and I run the workflow to assign a workflow to vCO for a detailed plan and a workflow state change.  The workflow is triggered, so I know that the integration works.  However, when I use the VCAC Designer to load the workflow MachineProvisioned stub, I expected to see a new heel of workflow for MachineProvisioned with an incremented revision number, but I still see the old workflow I created with the invokePowerShell action.

  I see anything in the designer VCAC?  I was half expecting to see some sort of Invoke vCO workflow wrapper, but since he's not here, I'm not sure how my workflow of vCO is getting called.

  Until I get a replacement solution to call powershell, I think I'll have to uninstall the customization and then just use invoke vCO with VCAC Designer workflows.  Or consider creating a server of vCO on a Windows Server instead of using the device (so I can run powershell vCO if necessary).

  So, the answer is, vCO inserts a 'wrapper' that can be seen in the VCAC Designer.  What was confusing to me, it's that install vCO customization workflow does not change the description, review, or the Created Date time fields VCAC designer.  I had to open the last stub of workflow in the VCAC designer to see than this vCO indeed updated it.

  VCAC development is a bumpy road. Can't wait for VCAC.next and further stabilization of the API, documentation and best practices.

• Developer of forms & workflow Builder

  All,
  
  Can anyone tell me the number of patch to download forms 10G developer & designer workflow for Metalink 12i.
  
  Thank you
  -

  Can anyone tell me the number of patch to download forms 10G Developer & designer workflow for Metalink 12i.

  Downloads of Oracle Developer Suite/Application Server 10g Release 2 (10.1.2.0.2)
  http://www.Oracle.com/technology/software/products/forms/index.html

  Oracle Workflow Client downloads
  http://www.Oracle.com/technology/software/products/workflow/htdocs/winclient.html

• vRealize 7 - NSX Automation deployments fail due to problems of certificate with vRealize Orchestrator

  Hello community,

  After you have installed the latest version of vRA, vRO, and NSX I run questions when you apply components that use components of the NSX. First of all: details of the version:

  -vRA: 7.0.0 (build 3292778)

  -vRO: 7.0.0.16989 (build 331003)

  -NSX: 6.2.1 (build 3300239)

  vRO plugin versions are delivered with the vRO version listed above with the exception of the plugin NSX, which has been updated to the latest version (1.0.3 published on 17.12.15).

  In the configured tenant vRO is configured as endpoint. I can check the data collection is running and working. I can see the plugin NSX for vRO runs the workflow 'create endpoint NSX' from time to time using the configured user of vRA VRO.

  In the configured tenant vRO is thus configured as server default for ASD vRO. Connection test is successful. When you save the config I'm prompted to approve the vRO certificate, which I confirm. Note that the thumbprint specified matches the footprint of the vRO certificate that I get during the visit of the vRO system on https://vro:8281. I am able to navigate the vRO vRA designer workflows, therefore: connection seems established.

  Within vRO the vRA COFFEE and plug-ins IAAS have been saved successfully. I am able to browse the inventory of plugin for both plugins.

  To solve the problem, I created a new unified plan within the design section of vRA with the following configuration:

  -Transport box: my area of transport configured NSX (checked: manual creation on this area using NSX works very well)

  -Routed res pol. Bridge: my reference for the dash cluster to use Pol

  -The only component dragged to canvas is a 'network and safety'-> 'On-Demand NAT Network' that uses a profile preset 1-to-many network as is "Parent network profile" without manual modification.

  -Note that, although there is a plan very simple example to illustrate the problem, it happens with any model that I have set up if any component is confgured requiring the NSX plugin for vRO.

  "Whenever I ask this plan, the request fails with the error message:" ","application [fa1e0689-0d06-4308-a914-e498c0d1fd99]: 404 not found "

  Looking in vCenter, NSX and vRO I can check that nothing is really trigged when you ask for the action plan.

  Consider the vRA /storage/log/vmware/vcac/catalina.log becomes very visible:

  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.isEndpointAlive:88 -
  vRealize Orchestrator endpoint with url [https://s00-vro.my.domain:8281/vco] is not alive. 
  Exception message:> [Host name 's00-vro.my.domain' does not match the certificate subject provided by the peer (CN=s00-vro.my.domain, OU=VMware, O=My Company, C=DE)]
  
  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.getFirstAliveEndpointByPriority:200
  - vRealize Orchestrator endpoint [https://s00-vro.my.domain:8281/vco] with priority 1 is not alive. Skipping.
  
  org.springframework.web.servlet.mvc.method.annotation.ExceptionHandlerExceptionResolv
  er.logException:189 - Handler execution resulted in exception: Endpoint not found. There are no vRealize Orchestrator endpoints that are alive.
  
  com.vmware.vcac.platform.service.rest.resolver.ApplicationExceptionHandler.handleHttpStatusCodeException:673 - 404 Not Found
  org.springframework.web.client.HttpClientErrorException: 404 Not Found
  ...
  ...
  ...
  
  

  Please note that I double checked the certificate. This is a self-signed certificate created using the 7.0 vRO new control panel, the one I get when you go to https://vro:8281. It is valid and the object (issed to CN) matches perfectly the hostname entered the ASD and endpoint configuration in the vRA. It is separable and time on all components of the server is in sync with the use NTP.

  Now, I even re-generated certificate and re-registered and rebooted all the components, but while I can see that the certificate has been updated all components I always get the same question.

  Never had this problem with the previous version of the NSX / vRA / vRO. I checked the documentation if nothing has changed here, but did not find what I'm doing wrong. Anythimg I'm missing here? Any bug?

  OK, this seems to be the issue. So put atleast to previous day since version ofvRO (cannot check if it's true for charges vRO 7 installs as well but it is probably) vRO 'control center' will generate certificates based SHA1 vRA love not for actions that use the endpoint in the vRA vRO. ASD seems to work without these problems.

  Sidenote: VRO upgraded installs will also come with SHA1 based CERT if they use a self-signed cert created by vRO. However: you would think that it is sufficient to recreate the cert using the control center. But it turns out it isn't, because it will generate a (new) based SHA1 cert.

  What I did to solve the problem:

  1. create a vRO SSH2 based certificate without the cert extensions, similar to the one that ships with built-in vRA vRO. I tend to use xCA for these jobs, but openSSL will do as well. The exact format required for the certificate of vRO is not documented, but I can make sure you need it like this: PEM certificate in key private and public including format PKCS #1, formatted as follows:

  -----BEGIN RSA PRIVATE KEY-----
  (Your private Key: your_vro_server.key)
  -----END RSA PRIVATE KEY-----
  -----BEGIN CERTIFICATE-----
  (Your primary certificate: your_vro_server.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your intermediate certificate: intermed.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your root certificate: root.crt)
  -----END CERTIFICATE-----
  

  I had problems when I used the key extensions so I would say you don't use and don't create a very basic cert without extensions V3, as indicated on the right of the image to my last post (ideally, you want to have a cert with the same properties as the cert is used by the device of integrated vRO vRA unless of course different CN) etc.).

  2. use the vRO control center located at https://your-externa-vro:8283 / vco-controlcenter / #/ and move to--> Orchestrator Server SSL certificate certificates. Use the action to import to import your PEM cert. It should tell you that you need to restart your device vRO. Then RESTART the device (for not just restart the service, this seems not be sufficient).

  3 al ' vRA remove the Endpoint vRO everywhere wherever it has been configured. Also, I removed the vRO to the ASD config just to make sure that nothings left.

  4 reboot the vRA power (IAAS can be left as what). I needed to do this because I have seen that the keystore at some point would keep beeing crushed by CERT vRA (?), I deleted it (AND I checked that they are deleted) reappears in the keystore after a while. After a reboot, the problem was gone, the keystore was clean.

  5. Add the configuration of endpoint and ASD vRO. Accept the certificate.

  6. the works.

  Therefore, while I have no more time to solve the problems more than I guess the problem is the SHA1 function certificate generated by the device of vRO. The internal unit is equipped with a SHA2 based cert that works and after that change the external device SHA1 cert in a basic cert SHA2 all works.

• Pavilion dv6401ca: processor upgrade

  My pavilion dv6401ca original installed celeron M520 1.6 GHz cpu.  I can it pass to T7600 core2duo T8300? I found the M520 is PPGA478 in the web site from outside, so do cpu T7600 and T8300 can also be installed in it?  If Yes, what should I do after the replaced cpu?

  Another question is: is he would lower the effectiveness of the T8300 if I change the RAM to DDR2 PC2-5300 667 M Hz? The T8300 FSB is rated at 800 MHZ.

  As you mentioned, the PC has 10 years and feedback technology was then more slowly compared to today's technology.

  The DV series at the time was art of units of technology for this period, and was a fast PC.

  When a motherboard or the PC is designed, all components such as curcuit page, fan, RAm, PCI cards, comonent holding components, display and thousands of other factors are taken into account. All of them are designed and ideal conditions value. For example, if you use a different processor to other components in the PC now has to help, even if the socket accepts the processor. Yes, the computer can work but not in his ideal State. The three best ways to attach the computer must have the max RAM capacity for computer, leave a free space of HARD/SSD drive and keep the virtual memory of automatic pagination or max.

  If I were you, I would goahead and but a new computer which I consider as depreciation of 20% per year on a device of temperament and if I consider that 10 years, then the computer has is pretty good for my calculation. Again, this is my point of view.

• Picture resized in Lightroom is changing dimensions open in Photoshop

  Help! My photographer works with my graphic designer to develop a cookbook for me.

  The designer gave the photographer the dimensions for images, which applies the photographer to images in Lightroom before exporting it as a high-resolution JPEG.

  The graphic designer is open these files, but the size of the image is different when it is opened in Photoshop.

  The photographer is exporting to 406 x 276 mm from when the same image is opened in Photoshop Lightroom, it does 352,72 x 239,78 mm

  We are perplexed everything that happens.

  No one knows how or why an image would re-size after be registered to a specific size?

  First check the pixel dimensions. If they are identical, the file itself is unchanged.

  Physical dimensions are always a secondary attribute, derived in pixel editors like Photoshop and Lightroom.

  The file is entirely defined by its dimensions in pixels. Then a physical print size stems from the resolution which is defined, and this can be arbitrary i.e. pixels can be printed at any size by changing the resolution figure.

  Print size = pixels per inch (ppi). This can be changed in Image > Image size. So much that "resample image" is not checked, this does change in any way the content of the file itself.

• How to view. SVG on a 10 Windows PC files?

  Hi all

  This Muse now supports. SVG files, I have collected some for use in Muse design workflows, that I have collected. PNG files. JPG files, etc.

  If I need to find a. JPG file, for example, I can navigate to a folder on my Windows based PC, using the file Explorer (or 'My computer') and see a preview of the content of each of the many files in this folder.

  With. Files SVG, the thumbnail is displayed in form of generic icon rather than see what is inside each. The SVG files, manufacturing to find things a task 'a file at the same time' (which means everyone. SVG file must be opened individually to see if it's the 'right').

  8.1 Windows offered an extension that allow this. Windows 10 does not appear.

  Does anyone have a useful idea or know a better way?

  Thank you!

  Gary

  Please click the link below. I'm sure that you will find it useful.

  64 bit - how to get the SVG thumbnails in Windows Explorer? -Super user

  Kind regards

  Vivek

• How can I view .svg files on a windows based PC?

  This Muse now supports. SVG files, I have collected some for use in Muse design workflows, that I have collected. PNG files. JPG files, etc.

  If I need to find a. JPG file, for example, I can navigate to a folder on my Windows based PC, using the file Explorer (or 'My computer') and see a preview of the content of each of the many files in this folder.

  With. Files SVG, the thumbnail is displayed in form of generic icon rather than see what is inside each. The SVG files, manufacturing to find things a task 'a file at the same time' (which means everyone. SVG file must be opened individually to see if it's the 'right').

  Does anyone have a useful idea or know a better way?

  Thank you!

  Gary

  I'm not a Windows user, but I was told that you need an extension of Windows for that.

  SVG Explorer Extension - home

  A windows user may be able to correct me.

• How can I get rid of the white border on the right side of my Muse sites?

  Why the websites I design in the center of the Muse on all devices, but the iPhone and the iPad, where they are pushed to the left? In the Site properties, I have "centered" checked.

  Set up a phone in Muse site is the best approach... The site you created would be not so hard to convert. I think that you would have better results. Regarding the tablet... I found that he is hit and miss, the site you designed is like not complicated but still once, design for each platform is preferred to Muse. Until the Muse development team decides if they want to introduce responsive design/workflow the best practice is to create for each platform.

• Possible bug? : External input (Type, number): failed to enable the 'Entry required' property presentation User Interaction tab

  Are people capable of reproducing the following, or is it just me?

  Problem:

  Impossible to activate the agent of property entry for an external input of type number in a user interaction as is not not but can define required entry of type string. This seems to affect interaction element user as well as the workflow if the number data type is used.

  Version: 4.2.1 but think it goes further than

  To reproduce for workflow entries:

  create a workflow, add entry named TestingNumber of type number and another called TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  To reproduce the element of user interaction

  Drag a box to design workflow user interaction element aon add external called TestingNumber of type number of entry and another named TestingString of type string.

  Switch to the Presentation tab and set the required before TestingNumber its default property (required entry is not for number)

  Result: Unable to set the terms of ownership of number but cannot for string

  It seems that it was possible before:

  In the workflow to Remove Instant excess in library/vCenter/Virtual Machine management / cliché. In the element of user interaction "Want to delete snapshots" the presentation tab has a number called "numberOfSnapshotLeft" which has a set of properties of entry required. screen attached.

  Meet others similar: http://communities.VMware.com/message/1848542#1848542 last posting mentions a similar case of not being able to establish the required entry of number but cannot string.

  Is this by design or a bug with my environment?

  Properties listed for number	Properties Sample referred to string

  
  Input parameter see theInput parameter see theHide the parameter inputHide the parameter inputPredefined responsesRequired entryPredefined list of itemsPredefined responsesDefault valuePredefined list of itemsMaximum number of valueDefault valueMinimum number of valueMaximum string lengthNumber formatMinimum length of the stringData binding.Custom validationData bindingCustom validationMulit

  It was available in earlier versions of the vCO and was withdrawn "by design". I don't remember what was the explanation. I worked around it by using other properties of validation such as min / max, or a custom validation.

  You can open a support call if you want the official response.

  Christophe.

• How to find if an invoice to the AP is approved automatically or manually?

  Hello

  I have a question about invoices in Payables.

  How know if an invoice is approved manually or automatically, is approved?

  Like, for example, a company, all less than $ 50 bills can be approved without the consent of the Manager. These invoices can be automatically approved. But all these bills over $ 50 must be approved by the Manager.

  Do we not have this kind of scenario? If so, how do we identify them in oracle tables. What table and column that specify this source.

  Thank you

  Hello

  You can find it by referring to the WFAPPROVAL_STATUS column in the AP_INVOICES_ALL table.

  If your workflow design is not not approve invoices less than $ 50,
  then the approval status of invoices less than $ 50 would be the value in WFAPPROVAL_STATUS as '' NOT NECESSARY ''.

  If your design workflow is to approve the Bills above $ 50
  then the approval status of the Bills above $ 50 would be the value in WFAPPROVAL_STATUS as 'WFAPPROVED '.

  Apart from the above, there are several other statuses available for invoice approval such as,.

  REQUIRED approval is required for a Bill, but no authorization is launched
  INSIDER = approval is required for a Bill, and approval is launched
  REJECTED = approval is required for a Bill, and the approver rejects the approval
  MANUAL APPROVED approval is required for a Bill, but with approval of Force the invoice has been approved

  Kind regards
  Ivruksha

• Media Muse Querys?

  Another question:

  is it possible to use media Querys on muse?

  Corey Merci for the previous reply.

  Happy to help you JnRepz!

  Muse is not currently use inquiries or offers a delicate design workflow. Please see the next topic and the idea for more information (and add your vote!):

  Can you change the layout of your site based on the size of the screen browser/device? (delicate design)

  http://forums.Adobe.com/message/4664909#4664909

  Layouts fluid grid

  http://forums.Adobe.com/ideas/1993

  Best regards

  Corey

• Proof of registration in a lighter file format

  Hello

  I'm working on a pretty big project with Captivate 5.5 and I especially need events Records. I have all images from bottom of registration in the library, and as I start ot work on them, I realized that each of them had a size of 4.5 MB. It is too much, given the number of slides in my project a. I noticed during the export of some of these files, they seemed to be in .bmp format. I know I could take each one and modify it to change the .jpg file format but it would take forever. Is it possible to save a project and immediately after the slide background in a .jpg format?

  Thank you

  Captivate uses BMP because it is a lossless format.  JPG compression is frozen, which means that you lose data.  In addition, BMP or PNG are formats better to capture screencaptures of software interfaces, because the type of compression, they use works more efficiently with large areas of color (which is what the software interfaces tend to have). Compression of JPG format is designed for the photographs and situations where you gradients and color changes in direction X and Y.

  So you don't try to change the format.  How Captivate stores the data in the library is not the same format he uses when publishing to SWF format.  You can control the final publish quality via the parameters of quality on each slide.