DeskJet 2540 all in one print a few pages and then stop saying printer error

Similar Questions

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP Deskjet 2540 all-in-one: printer does not print

  Hello

  I have a printer HP 2540 who was printing today and just stop printing: all documents are empty!

  I tried all options but no joy troubleshooting - can anyone help me?

  Have you tried all the steps is this HP doc.?

• I tried to connect my printer HP Deskjet 2540 all-in-One Series to my Dell Inspiron 15

  Separated from this thread.

  Hi Bill,

  I tried to connect my HP Deskjet 2540 all-in-One Series printer to my Dell Inspiron 15 for two days without success.  Can you help me?

  Lenora,

  I have a HP DeskJet 2540 on my Dell Inspiron 1545.

  The instructions from HP work so you should be fine if you follow them.  The CD contains a ReadMe file that describes the installation procedure.

  You must install the software first, and only then connect the printer.  Note that you will first need to install it on a USB connection.  You can change this later if, like me, you intend to use it with WiFi.

• HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

  Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

  Hello @bubbamoorea,

  Welcome to the HP Forums!

  I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

  You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!

• To re - install my web download drivers for my Deskjet F4280 all-in-One Printer

  I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
  HP Software IDF.

  I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).

  I discovered a web page of troubleshooting on the hp.com Web site, under the following title:

  ""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"

  on the following web page: "http://support.hp.com/us-en/document/c03030583".

  My processor information:
             "AMD Athlon II X 2 240 processor / 2.80 Ghz '.

  I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.

  I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.

  If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:

  {Deleted private information}
  

  Thank you, Christopher Canfield.

  The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.

  Have you tried to use the Wizard for Windows HP printer installation?

  I recommend to try it. It can solve the problem you are experiencing.

  If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.

  Uninstall the HP printer software.

  Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.

  Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.

• My HP Deskjet F380 All in One printer will not communicate with Vista system

  My HP Deskjet F380 All in One Printer worked correctly for always until 25/04/11 and then later it stopped working.  I swear to you that I have nothing else so he can stop working.  I have lost the disc that came with the printer.  When I bought this way while you, I simply plugged it and a pilot has been downloaed righ away and it worked (aka plug & play).  Any help would be greatly appreciated thanks!

  Hello

  I suggest try to download the latest drivers from the link below and check if this can help:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  It will be useful.

• where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  I typed 'to the HP Deskjet F4580 all-in-One printer"and the installation software cannot find the printer on the HP website.

  But it is the search manually separately via a different browser.

  So there must be another product number!

  Hello

  The following link shows his support site:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3944758

  You can find lots of information on 6 sections.

  Kind regards.

• Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  How can I solve this problem?

  Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 2540 All in One on macbook pro

  I recently acquired a MacBook Pro running the version of Mac OS X 10.6.8.   I could get my wireless networked 3540 HP all-in-one installed as printer, but it won't install, recognize oe open the scan function. ; even from the HP installation disk.

  What can I do?

  Hi @chazcee,

  I see by your post you have the Deskjet 2540 and are not able to install it on Mac. I want to help you.

  I provided some documents to help solve this problem.

  HP Deskjet 2540 and Deskjet Ink Advantage 2545 Printer Series - "Can't find printer" Error Message appears on the computer for a wireless network Installation.

  Set up your printer for a wireless network for the HP Deskjet 2540 and 2545 all-in-One Printer Series.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Re: Deskjet 3520 all-in-one: print black ink NOT...

  I'm having exactly the same problem... It worked fine last time I used it... I put new cartridges of ink inside and black is dead... its crazy that it worked perfectly... have you already found a solution to your problem... His 03:00 and I spent hours trying to fix... I need my printer as soon as possible... I really need help / / I have a deskjet 3520 all-in-one... and all tests come back perfect... even cleaned the print head and everything...

  I actually uninstalled all previous updates for the printer and then is went to the hp site and entered my serial number and the number of product and downloaded all updates for this printer and downloaded printer Dr... After that it was finished I rebooted my computer and printer directs the Dr. PC. It came with nothing wrong, but I chose clean the print head and when he finished he asked if I'd like secondary cleaning too and I chose Yes. After that I tried to print an all black. Page and unlike prior it was not blank it was black, but red stripes then I printed again and the whole page was red but I printed again, and it was perfect... When before id try to print a page in black, he's white... My printer has not messed up at all since and its been a month... It is with its daily use for hours at a time in printing non-stop... I hope this works for you if you are having this problem and found that nothing else seems to fix it try this... It might be useful...

• levels for HP Deskjet F4100 all-in-One printer

  I installed Windows 7 on my desktop and can't find the HP Solution Center.

  Hi 2dw4,

  First, we will use HP printer Installation Wizard. HP printer install wizard for Windows was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer. Click here to download the utility > hppiw.exe

  If for some reason this does not resolve the problem, you can also download the full software functionality for the F4140 here. All-in-one printer, HP Deskjet F4140 software. This download includes the HP Deskjet (advanced imagery and product features) Software Suite and the driver.

  I hope this helps.

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• Cannot download driver scanner Epson Stylus NX400 all-in-one printer, error message "error during installation.

  Original title: windows 7 driver scanner epson nx4000 troubleshooting

  message "error during installation"

  Hello

  1. How do you try to download driver?
  2. What is the full and exact error message?

  I suggest to set up the computer in a clean boot state and then try to download the driver manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Now, try to download the driver for Epson Stylus NX400 all-in-One printer scanner manually on the manufacturer's Web site.
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=106004&infoType=downloads

  For more information, please see the link.
  Installation of a scanner
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  I hope this information helps!