DeskJet 3050 scan error

Similar Questions

• Install HP deskjet 3050 a error: missing operating system

  My printer HP deskjet 3050 has during the installation, I get the error: operating system file missing c:\Windows\inf\usb.inf

  Please help
  Windows 7 64 bit

  Hi Nathan,

  1. What is the accurate and complete error message you get?
  2 does the problem only occur when you are installing Hp Printer?
  3. don't you make changes to the computer before the show?

  Method 1: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: I suggest to perform the clean boot and then try to install the drivers to check whether a third-party program is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Method 3: I suggest you to uninstall and reinstall the latest drivers on the manufacturers website. http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4311836

  Post us the results once you try the steps above.

• DeskJet 3050 has errors in the press cannot use alignment

  Hi, I hope you can help.

  I just today inherited a second Deskjet 3050 J611 from a friend a hand. I'm setting up on my system and I have a problem with the alignment page printing.

  My system is Windows 7 64 bit and I have connected the printer wireless to my network. The thought I want to calibrate the printer I ran the alignment, but go looking at the alignment of the mine of the internet pages is decidedly not just. Some lines seem to be missing and the illustration at the end of printing is 'lines' with blank lines. Therefore, the analysis of the alignment fails. I also printed the windows test page and that seems doubtful too with the lines of print with the tops? cut, but some lines are intact. I've included a scan of the print-out of alignment if it helps to diagnose my problem. At least the scannner works!. I can print from my Ipad 3 even if the quality is not good and the same thing with Windows printing, I hope that if I can make the alignment that the seeds will disappear.

  I changed ink for new trucks and installed the latest drivers and software from the HP site.

  Please help if you can.

  

  In General, this kind of question is cleared up by the replacement of the ink cartridges. Especially with Deskjets and more with have received you second hand, the chances of the cartridge/print head (they are combined) being empty or clogged is very likey. I would as a first step, and if this does not resolve the issue here is a document of support on print quality issues which can also produce some more light on the question you have:
  
  
  
  http://www.HP.com/United-States/consumer/digital_photography/print_better_photos/tips/print-quality.html
  
  
  
  I hope that helps you out, and if you have any questions do not hesitate to contact me. I will reply to you as soon as I can.
  
  
  
  Have a great day!

  

• DeskJet 2540: Scanning error

  Nothing wrong with printing - the computer recognizes that she and I can print etc. However, I am unable to do two things:
  1. install the wireless connection
  2 do the analysis. When you use the "print and Scan Doctor", I get this message:
  Driver error: the scan driver is unable to communicate with the product.

  I removed and reconnected the power cord and restart the computer, but it still does not work.

  I jumped the scan after that and found that everything (except Driver and HP Twain Scan error check) has a green check mark.

  Would be grateful for the help. Thank you!

  Hi @lacleman,

  Welcome to the HP Forums!

  I understand that you cannot scan or set up connection wirelessly with your HP Deskjet 2540 on Windows 7. I'm happy to help you!

  A few questions for you, if you don't mind:

  • You are able to make copies with the printer? Copy the text or mixed Documents.
  • Do you see flashing lights on the printer?

  For now, please see the following guides:

  • Setting up the printer on a wireless network for the HP Deskjet 2540 and 2545 all-in-One Printer Series.
  • A "inaccessible Scanner' or ' year error occurred while scanning" message for HP Deskjet 1510, 2540 Deskjet, Deskjet Ink Advantage 1510 and series printer Deskjet Ink Advantage 2545.

  If these guides are not helping, go forward with these solutions:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows 7).
  • Reinstall using the printer HP install wizard for Windows.

  Hope this information is useful and have a great day!

• HP Deskjet 3050 J610 - error

  Printer has worked for a while and stopped working a few days ago.

  In the queue, I get an 'error' as the status

  I uninstalled the software countless times. installed from disk and downloaded the latest driver for my computer (macpro, OS X 10.6.8).)

  Also the switch cables & cartridges & it still does not work.

  Now when I open the HP utility, I get a message telling me that my computer components have been developed for another version & some features will not be usable. Then he told me to download the latest version of what I did several times. I had 3 HP printers connected tpo this computer 6 months & now none of them work, so I uninstalled all the software for all of them & focused on trying to get just the HP Deskjet 3050 J610 to work.

  I did Test the HP utility, which tells me that if it prints OK that the fault is the drivers or printing from my computer system. It does not print OK, and here, the solution is to install the latest drivers, which, once, I've done several times.

  Anyone else having this kind of problem? Or have any idea of what I need to do?

  Thank you.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: http://support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• DeskJet 3050 scan to other client computers

  I have a Deskjet 3050 J610 printer. Can I put it to scan other client printers?

  Hi Bobby,.

  I understand that you need to know if you can set printer Deskjet 3050 J610 to scan from other printers?

  1 do you want to print the copy on the printer in the network?

  2. you are on a domain network?

  You can read the article on how to scan using Deskjet 3050

  HP Deskjet 3050 all-in-One Printer

  How to perform a scan: Windows 7

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03466081&tmp_task=useCategory&cc=us&DLC=en&LC=en&product=4066452

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• hp deskjet 3050 0x805d0700 error code

  The printer started to display the "Paper jam" message, follow the steps described by HP to make sure that the paper jam is solved, and nothing has worked. Now it seems it won't even turn on.

  Very frustrated! Help, please. Thank you

  Hi MeesterStewart,

  See the following documents below and let me know if you still have the problem?

  http://support.HP.com/us-en/document/c02130018

  http://support.HP.com/us-en/document/c02200770

• DeskJet 3050 has: Scan Options window

  Hello

  I have the DeskJet 3050 a printer and when I scan something it automatically scans in JPEG format. As I want to change my scans, I downloaded and installed the OCR software (I followed the instructions posted on the support forum HP, installation of the software for the HP Pro 8500 printer A910n JO). After you install this software, however, I can't find a scan window that allows me to choose the format for the scan options I'm about to do -: in other words, I don't have a window which now allows me to choose the RTF rather than JPEG. Do you know where I can find it?

  (the instructions given on the Support forum for this step are: 4) now open the HP Deskjet 3050 scan window. Select "Scan" everyday and in the dropdown for "Type", select "Rich TEXT" or «indexable PDF»

  (My problem is that I can't find the window of scanning HP DeskJet 3050 - and constantly scans automatically to JPEG format)

  Thank you

  First of all, you must have the drivers and software HP Deskjet full functionality installed.  The scanning software provided with the HP Deskjet 3050 does NOT include OCR capabilities.  However, the HP OfficeJet Pro 8500 a A910n printer come with OCR capabilities.  Thus, the installation of the software and driver for the OfficeJet included installing the OCR package that can be used by the HP Deskjet 3050 HP scanning software and the product HP OfficeJet.

  The HP scanning software are accessible in several ways:

  • #1 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Scan
  • #2 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Deskjet 3050...
  • Method #3 - Windws 7 Office: find HP Deskjet 3050 desktop icon; If it is present, run (double-click on).

  Method #2 and #3 will launch the Desktop Client software. Under the analysis section, choose 'Analyze a photo document' to launch the HP scanning software.

  • Method #4: Navigate to C:\Program Files (x 86) \HP\HP Deskjet 3050\bin; Run Scan.exe HP (double click).  (Note: the C: drive is the default installation drive, change accordingly if you have installed the software on a drive by default.)

  In the HP scanning software, you should see a number of shortcuts named Scan on the left panel of the dialog box.  Select the Scan shortcut named 'Scan' every day and change type of file to RTF settings in the right pane of the dialog box.  You can also create your own Scan shortcuts and configure the settings for scanning for this Scan shortcut to your liking, including the file type.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  Although I am an employee of HP, I speak for myself and not for HP

  Give Kudos to say 'Thank you' by clicking the 'PLoP icon '.

• HP Deskjet 3050 j610a scan error

  About a week ago my HP Deskjet 3050 multifunction j610a worked very well. However, sudden occurred a parsing error that can't be solved. Whenever I scan any document, the result is a totally black image with a lot of very thin vertical stripes on it. Changes color bands according to the type of analysis that I chose, they are white for the black and white scans or have several colors for the colored scans. Even without any document on the scanner, the analytical result is the same.

  I have uninstalled/reinstalled the software supplied with the device and did the same with the downloaded software from the HP site, but none of them worked.

  The Deskjet 3050 is connected to my PC (Windows 7 Professional 64-bit) via a wireless connection, but the problem also occurs when connected by USB cable.

  PS 1: The HP print and scan doctor found no no problem.
  PS 2: the print function of the unit works fine.

  Thanks for the clarification, because the same question appear while copying there seems to be a hardware failure of the scanner and not related to the software.

  Try following the steps below to solve such a failure, if the same continues contact HP technical support at the service of the unit:

  http://support.HP.com/us-en/document/c00587971

  in case the problem persists when you have completed all the steps listed, the phone number to contact HP is that by selecting your region and following techniques are supported after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Shlomi

• Re: Error scan Deskjet 3050

  What would this process for a MAC 10.6.8?

  Hi AUSG512,

  You can scan using the preview or Capture of Image?

  You have a folder for HP under Applications?

  If so, open the HP utility, and then select the Deskjet 3050 to refresh the printer. Let me know what you find?

• New Deskjet 3050 J611 has no scan on iMac OS x 10.6.8 + utility HP do not open

  Hello - until I posted this I spend some time looking around and follows that some advice given here. It did not solve my problem. I bought a new Deskjet 3050 a yesterday.  Installation and wireless, the installation program has worked well.  I can print.  I can't scan - not with my iMac scan programs, nor with the HP scanning program.  I used the latest drivers I think. I first installed from the CD and then downloaded the drivers iMac OS X 10.6 from this site and re-installed.  I restarted iMac. Printer power switch.  I can't even scan.  Scanner programs don't seem to be able to establish a connection with the printer.  When I press on the analysis on the printer menu screen I get a msg saying there is no connected computer.

  More I can not open the HP program utility - "certain elements are missing," said the error message (even afetr two ire - install).

  All tips & tricks to fix this I would be grateful.  Thank you in advance.

  Joel

  Hello

  In reading your comments, you did not updated the latest driver by Apple Software Update, it could strongly affect the digitization of the Mac:

  Click the Apple icon, and then click software update.

  Make sure to install any update HP available, then check any change during the scan or at the launch of the HP utility.

  If the same question is not change, follow the steps below to completely remove and reinstall the software.

  Step 1: Uninstall the HP software by using the functionality of the scrubber:

  * Please note that the following steps will delete all HP software installed.
  
  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Second step: reset the printing system:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
  
  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Step 3: Repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Step 4: reinstall the latest version of the software below:

  http://FTP.HP.com/pub/softlib/software12/COL37730/Al-93167-1/DeskJet-3050A-J611-series_v12.7.0.dmg

  Step 5: install the latest update of HP:

  Click the Apple icon, and then click software update.

  Make sure to install any update HP available

  Please let me know of any changes,

  Shlomi

• Example: HP Deskjet 3050 has J11n: my printer Hp3050n used to scan to my applemac

  Until recently my HPDeskjet 3050 has scanned on my mac automatically j11n. It will not now and message scanner is not found. I am completely ignorant about computers. Help, please! Thanks.I could have disabled and now don't know how to connect.

  Hi @Valerie35,

  Welcome to the Forums of HP Support! I see that you are running into some problems of printing and scanning to your HP Deskjet 3050 has, when you try to scan, you get an error message 'not found computer '.

  If you have recently lost the connection between the printer and your network wireless, you have to reconnect using the USB key to the wireless configuration.

  Please go ahead and start troubleshooting here: printer does not maintain the wireless connection

  I hope this helps, let me know the result!

  Thank you

• HP Deskjet 3050 (J610a) won't scan - printer not found

  This fine all worked until I had to get a new router and I can scan after you have reinstalled the HP 3050 wireless printer is no longer on my computer. It is worth noting that on my other computer, there has been properly installed on Vista and I can scan and print normally.

  When I click on the scanning software HP on the desktop or in the program menu it shows an error window saying "HP Deskjet 3050 J610 series is not found"

  I ran the HP scan diagnostic software and he said just that no scanner are installed. But I installed the software from the CD, I did the first time I got the printer and I did something different this time when I changed the router then why didn't he scan?

  Can anyone help?

  All sorted.

  The problem was that I had installed the drivers of BASE and not the FULL software.

  Silly me!

  But it could help other users in the future. Uninstall, and then download and install the FULL software and everything should work fine.

• HP Deskjet 3050 a does not scan.

  Original title: Scanner

  I have a HP Deskjet 3050 impression scanning & copying but I am unable to get the scanner to scan

  Moved from IE

  Hi Anne,.

  It seems that your scanner does not work.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. what happens when you scan? You receive error messages?
  3. what operating system do you use?

  While your answer above information, you can try to reinstall the drivers for the printer from the following link.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4066452

  Answer us with the above information for you help.

• HP DeskJet 3050 J610 will not scan.

  OS: Vista 32-bit

  Error message: "error analysis. try to scan from the computer:

  No changes made to the system.  Was analysis correctly.

  When I try to scan from computer, trying to open HP DeskJet 3050 J610 series scanner icon on the desktop, does not open.

  Hello kkina6bz

  I have a few questions to help troubleshooting:

  • How your printer is connected?
  • The icon on the Desktop gives / error message or is it opens at all?
  • You have another computer, you can try scanning from? It would be one of the easiest ways to identify the problem.
  • Have you tried reinstalling the printer software?
  • Have you tried to run printing HP and doctor Scan? If this isn't the case, it is a diagnostic utility that can sometimes find the problems of scanning. HP Print and Scan Doctor

  I suggest following the procedure described in the article below. The article contains several possible solutions to correct the mistakes of scan from the control panel of the printer.

  A "connection error" or "No computer has detected" Error Message appears when you try to Scan from the printer control panel