Detect the version of the OS during OTA installation

Similar Questions

• Is there a way to detect the mouse during the event for the controls within a tab control?

  I need to change the mouse pointer when it moves on controls that are found in the tabs.

  Now when the mouse passes over the tab, LABVIEW does not detect the saperately of controls for the mouse over event.

  Is there a way to do what I intend to do?

  Your problem is with the Panel.Controls [] property. It does not return the controls that are inside containers (tables, tabs, groups) and returns only the container itself. As illustrated by Sam, if you want the references to the controls in the tab, you must get the references to the pages and get the controls on each page and add them to your original table and do this recursively.

  You can either write a VI to do this (or search for it. There was posted here screw that analyzes recursively the FP for all control references) or everything just statically for this control a tab and move. There is also a VI delivered with LV that can help you with this, but I suggest that you not use, because it will be difficult to operate if you generate an EXE file.

  And I also recommend the Tool of Capture of Code.

• OS detection during OTA installation?

  I have setup an installation OTA of my application that must be installed only by devices with a certain level of the OS. Is there a way to enforce this (i.e .jad file property) or equivalent? Basically, I want to prevent users with incompatible devices to try to install the live application.

  I use eclipse with the BB plugin.

  Thank you for yor help.

  I don't know if this is possible, but maybe you can implement a script in your OTA site where it checks the user agent of the applicant unit. from there, you can have a logic on whether to download or not.

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now?

  Updated since version 7 or 8 during the installation SETUP message - your computer must be restarted to complete a previous update of Firefox. Do you want to restart now? Options are 'yes or no'. Option 'Yes' restarts my computer & the attempts to Firefox, I get the same message. Reboot several times has no effect. The option 'no' closes the file and nothing happens. Running XP Pro version 2002 SP 3. All normal programs have been updated to the current date (Adobe, Java, etc.).

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• When it fails to uninstall, uninstall the old version of Java 6. "I messagWe have detected the following older versions of Java installed on your system: e"

  How uninstall the old version of Java 6 and its updates when it does not uninstall to delete command? I get the following message: we have detected the following older versions of Java installed on your system:

  • Java (TM) SE Runtime Environment 6 Update 1
  • (TM) 6 Update 2
  • (TM) 6 Update 5
  • (TM) 6 Update 7

  These older versions do not want to uninstall it and I get the message: "error application of transformations. Check that specified transform paths are valid. What I'm doing. Java will not respond to help. Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you are trying to uninstall Java in Windows XP.

  I will certainly help you in this matter.

  Please follow the steps in the links.

  Why should I uninstall older versions of Java from my system? http://www.Java.com/en/download/FAQ/remove_olderversions.XML

  After uninstalling Java, how to remove its entry in the windows?

  http://Java.com/en/download/help/regkey_addremove.XML

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• While in "Event Viewer-System", "an error was detected on device\Device\Harddisk2\D during a paging operation what is this error,"D"drive" is a dvd - rw drive empty on the front of our Tower? :

  We had the people that our PC reconstruction after an accident some time ago, say "it seems that the Windows swap file was somehow moved on the disk"D", and it should be on the main 'C' drive.  Microsoft sent us an email with instructions on how to reset the Windows paging on 'C' drive system and to reset the minimum and maximum space allowed for it.  We did it, but the ' warnings are still there. " The "D" drive is a drive of dvd - rw empy on the front of our Tower.  Most of the time it is empty, as it is now.

  What are they and how to fix it?  I'm 73 years old and still learning.    Grandpa

  Hello

  Check to see if that helps!

  http://www.techsupportforum.com/forums/F16/event-ID-51-nf68i-an-error-was-detected-on-device-device-Harddisk0-d-during-a-PAG-273585.html

  http://support.Microsoft.com/kb/244780/en-us

• How can I detect the support version lower than 4.7 touchscreen

  Hi all

  I am developing an app for non touch devices with version 4.5 of departure and now will make the same application for devices supporting contact, so planned to use the Touchscreen.isSupported () - but it is available only from 4.7. But the app should take charge of 4.5, so how do I detect the device is palpable or not palpable in version 4.5?

  Thanks in advance,

  Kitty.

  You can use this code:

  new Canvas() {}
  protected void paint (Graphics graphics) {}
  }
  }. hasPointerEvents()

• event ID #51, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC0000188

  2 weeks ago I started to do, the driver has detected an error on \Device\Ide\IdePort0 controller, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC000018. Event ID #51, #11 bottom line I check the disc, I restarted computer sometimes the logical disks and primary transmission is up to leave after a certain time.  About 6 months ago I bought a new car because I had the same problem.  I had checked, adjustment, cables, power, bios, software update settings, BIOS and decided he could be the player.  I used manufacturing software troubleshooting - the drive past all the test.  I used the S.M.A.R.T. test - it past.  As I said I check disk found nothing.  However, I deleted and brought another drive.  Now, I get the same indications listed above.

  Hi Robert,.

  I'm glad that you posted the request in the Microsoft community. If I understand correctly, you get an error message indicating boost loan session interrupted because of an error.

  Here is an article that talks about the error you are getting. Go through it and check.

  Here is an article on Ready Boost. Have a look at.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• How to detect Flash version version in Javascript before the Flash?

  Versions of flash player are in the format: Major.Minor.Release.Build

  Many sites use the SWFObject javascript library to detect the installed version of Flash player.

  The SWFObject tool is only able to detect the drive installed Major.Minor.Release version numbers.

  It is not able to distinguish the Build number.

  
  Recent security patches are only increment the version number, is not possible to ensure that the user has a version that is installed without danger.

  The SWFObject detection occurs BEFORE the FireFox browser version detection, so we could show a more user-friendly message "Please update your Flash" for users.

  
  How to detect Flash version version in Javascript before the Flash?
  Or Adobe would be kind enough to increment the version when the critical security patches are made?

  var a = navigator.plugins;

  var dllfname;

  If (0< a.length)="">

  for (var d = "", b = 0, g =.) Length; b< g;="" b++)="" if="" (-1="" !="a[b].name.toLowerCase().indexOf(" flash"))"="">

  dllfname = a [b]. Filename;

  }

  }

  $parts = dllfname.replace(".dll",_"").split ("_");

  $buildnumber = parseInt($parts[4]);

  This will get the build number of the dll file name string and can be concatenated with swfobject.getFlashPlayerVersion Major.Minor.Release version numbers ().

• I download the trial version Criative cloud, and during installation pops up the error 201, what's the problem?

  I download the trial version Criative cloud, and during installation pops up the error 201, what's the problem?

  Hello Michelle,.

  Please see the links below:

  Error download or update Adobe Creative Cloud applications

  Error 201

  Download Creative Cloud - error 201

  It will be useful.

  Concerning

  Bianka Attre

• [SOLVED] How to detect the vmwaretools COS version

  is it possible to detect the vmware tools COS esx host version?

  I tried with vmware-cmd and look a the guest virtual machine configuration file, but it does not work

  I'm not interactue with guest O.S.

  Is posible to cos?

  Yes, although vmware-cmd will not have this information for you.

  You can use vimsh's classic vmware-vim-cmd ESX and ESXi is vim-cmd

  First of all, you need to retrieve the list of virtual machines, you have, you can do this by running the following command and by extracting the property 'VmID ':

  VMware-vim-cmd vmsvc/getallvms

  This output, you will have the VmId as the first column and you will use this ID to get information on your virtual machine, to check the status and version VMware Tools will run, you must run the following command:

  VMware-vim-cmd vmsvc/get.guest [VMID]

  Here's a running example looking for a virtual machine called "vma40" and checking the version of VMware Tools:

  [root@himalaya ~] # vim - vmware - cmd vmsvc/getallvms | grep vma40
  1872 vma40 vma40/vma40.vmx [dlgCore-iSCSI-zebi96-VDI] vmx - 04 OVF rhel5_64Guest this file contains the vSphere Management Assistant (vMA) virtual machine.

  [root@himalaya ~] # vim - vmware - cmd vmsvc/get.guest 1872. grep-i tools
  toolsStatus = "toolsOld"
  toolsVersionStatus = "guestToolsNeedUpgrade"
  toolsRunningStatus = "guestToolsRunning"
  toolsVersion = "8193."

• Before you install the new version without CS2 activation, during uninstall old Photoshop, should I ke

  Before installing the new version without CS2 activation, during uninstall of the old Photoshop, should I keep or delete preferences and should I use standard uninstall or advanced?

  You are welcome to keep your preferences.  They will be used when you reinstall Photoshop CS2.

• detect the version of JavaFX?

  Is there a way to tell what version of JavaFX library I use? Have installed?
  
  (It's a bit embarrassing that the beta, on Windows Installer says in any case, I've already installed when I try to upgrade to the latest beta version, so I never know. It would also be nice for diagnostic reasons be able to know, by program, but I can't find anything in the documentation of the API.)

  You can run this program:

  import javafx.application.Application;
  import javafx.stage.Stage;
  public class ReportVersion extends Application {
    public static void main(String[] args) { launch(args); }
    @Override public void start(Stage stage) {
      System.out.println("javafx.runtime.version: " + System.getProperties().get("javafx.runtime.version"));
      System.exit(0);
    }
  }
  

  On my machine, it provides the following result:

  javafx.runtime.version: 2.1.0-beta-b12
  

• "previous installation of host services has detected the error.

  I posted this in the beta forum and not answer. I'll try here... Here is the link to the beta forum: http://communities.vmware.com/thread/278405

  Try to uninstall a component, vShield, in this example, the portion of Port Group isolation. I get the following error:

  "previous installation of host services has detected the error.

  ESXi V4.1

  VMkernel is on a dvSwitch

  Thank you

  Mike

  THIS ONLY if APPLIES to vShield Zones / App vShield

  One last thing, you mentioned this announcement on the beta site which tells me that you had a pre - GA on areas/App version installed. If that were the case, or maybe a previous installation of App/areas (Beta) had an installation/uninstallation failed, then do this procedure to clean the host of all the previous components.

  1. remove the vmservice-vswitch created during installation (assuming that there is no other device that uses this vswitch)

  2 remove the address 169.x.x.x, given the Net.DVFilterBindIpAddress of the host property.

  Detailed procedure:

  1. go through the uninstall process each time as

  possible (if one of the components to show as it is installed). Then go to the

  next steps.

  2. search for the vmservice-vswitch and delete

  it. it is a vSwitch without physical adapters service that was created

  during the installation. It will have 2 groups of ports, one called

  vmservice-vmknic-pg and the other vmservice vsheild pg.

  3. Select the ESX host on the left hand side

  tree on the right hand click the Configuration tab pane and click

  Advanced settings of the software. In the Advaced search page settings

  the Net section, then select it. Scroll through all the

  way down and then make your way up until you find

  Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and

  Click OK.

  4. installation of APP vShield vShield Zones should now work.