While in "Event Viewer-System", "an error was detected on device\Device\Harddisk2\D during a paging operation what is this error,"D"drive" is a dvd - rw drive empty on the front of our Tower? :

Similar Questions

• event ID #51, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC0000188

  2 weeks ago I started to do, the driver has detected an error on \Device\Ide\IdePort0 controller, an error was detected on device \Device\Harddisk1\DR1 during a paging operation. ; Session "ReadyBoot" stopped because of the following error: 0xC000018. Event ID #51, #11 bottom line I check the disc, I restarted computer sometimes the logical disks and primary transmission is up to leave after a certain time.  About 6 months ago I bought a new car because I had the same problem.  I had checked, adjustment, cables, power, bios, software update settings, BIOS and decided he could be the player.  I used manufacturing software troubleshooting - the drive past all the test.  I used the S.M.A.R.T. test - it past.  As I said I check disk found nothing.  However, I deleted and brought another drive.  Now, I get the same indications listed above.

  Hi Robert,.

  I'm glad that you posted the request in the Microsoft community. If I understand correctly, you get an error message indicating boost loan session interrupted because of an error.

  Here is an article that talks about the error you are getting. Go through it and check.

  Here is an article on Ready Boost. Have a look at.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Backup associated with repeated warnings ID 51: an error was detected on device \Device\Harddisk1\DR1 during a paging operation (or \Device\Harddisk5\DR5)

  I just found out about 7 000 event ID 51 warnings in the event viewer.

  These warnings began when I started using an IEEE 1394 external drive for backup. I can't say if the more than 7,000 warning messages started after formatting, or when the backup began.

  About 5,000 messages occurred during the first backup which lasted several hours, back on February 24.

  All of them had: an error was detected on device \Device\Harddisk5\DR5 during a paging operation.

  Managed backup done this night here and as far as I know. (I don't look in the observer of events at this time.)

  The next day, at 11:00, the messages have started, but this time in bunches of a dozen or less within one or two seconds. And they all change to this:

  An error was detected on device \Device\Harddisk1\DR1 during a paging operation.

  Since then, the warnings occur sporadically. The backup program ran on 28 February, and produces over a thousand more. A group that's happened when I tried to back up the registry to a subdirectory on the drive yesterday.

  What is strange, is that the drive seems pretty much OK. Backup completed without error. I can copy files to it, and then copy it.

  Given that these are warnings, is this correct? A driver problem?

  the drive is using 6.1.7600.16385 (win7_rtm.090713 - 1255)

  I formatted just before using it for the backup. These are the old years, but we never had any problems with it before.

  Any ideas on how to understand what is happening?

  You can also try changing the driver firewire to INHERIT one. (Device Manager, Bus IEEE 1394 controller, software update driver, browse my computer, let me pick from a list... Choose the line of inheritance in it.

• Error: A parity error was detected on \Device\Ide\IdePort0 at system startup

  Original title: Windows XP error 11

  Event Viewer maintains with the following messages appears at the start of windows xp,

  The driver has detected an error of the Comptroller on \Device\Harddisk0\D.

  A parity error was detected on \Device\Ide\IdePort0.

  Hi plogmine,

  We recommend that you change the setting of firewall/security at different levels and then try to access files and folders on the network.

  See this article for more information: http://support.microsoft.com/kb/814112

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The event viewer displays continuously errors with ID 7000 and 7009

  I use Acronis Disk Monitor, which shows the disk health 82% due to a bad block on disk. Observer events poster continually errors on ID 7000 and 7009, but I can't find a solution to these errors or what they mean exactly.

  11/14/2010 08:31 am, Catkin333 wrote:

  I use Acronis Disk Monitor, which shows 82% because of the bad health disk
  block on the disk. Event Viewer displays continuously errors on ID 7000 and
  7009, but I can't find a solution to these errors or that they
  mean exactly.

  If Acronis reports bad blocks on the disk, then you should replace the disk as soon as possible.  Blocks of bad sectors/bad is not repairable, and once they begin to appear that they tend to behave like a snowball rolling downhill, you will get several of them with increasing speed.  You may lose your data if you keep using this drive.

  Regarding the events 7009 & 7000, you will need to copy & paste the events here for give us to you more information.  Double-click on the event to see its properties, and then click the icon of the Clipboard (which looks like 2 pages of paper) to copy the event, you can then paste it in your next post.  These Service Controller errors may be caused by a multitude of different things.

  John

• getting an error code: 8024002d when you install service pack 3 to the top of a tower of Vista

  getting an error code: 8024002d when you install service pack 3 to the top of a tower of Vista

  Hello

  There is no Vista Service pack 3; He stopped to Service Pack 2.

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: «0x8024002D "»

  https://support.Microsoft.com/en-us/KB/958041

  See you soon.

• When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.__How can I solve this problem?

  When turning on my computer always error message "drive: c / on the Neurofibrillaire degeneration and is currupted.
  suggest how to check the disc I have to press a key before 6 second, try that, but nothing is coming.

  How can I solve this problem?

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error in the Event Viewer system log

  Separated from this thread.

  Gerry,

  Thank you for your response.  It gives me a better understanding than the data stored on my computer that may be able to help me, and you have introduced me into a player.  I've posted the system log here and it includes hundreds of lines.  However I do not know how to make it visible to you.  I checked it to share and the only file that is serious is one that you brought me to download.  Although I have not found the answer to my problem, I found your advice gave me a better understanding about the tools that are available.  Maybe I'll get to understand how to use them.

  Ed Walsh

  Ed

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on the event viewer:

  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Event Viewer/Task Scheduler error message

  I get the error message "MMC could not create the snap" in Task Scheduler and Event Viewer. I tried various things, including a reinstallation of the .NET Framework, and nothing seems to solve the problem. Does anyone have any suggestions?

  michiganjoe,
  Thank you for visiting the Microsoft Answers community forum.

  The first thing I would try is to run the System File Checker to see if any system files got corrupted:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If this does not work, we need a little more information, the better to help you.  What version of Vista are you using?  When exactly this error happen?  Is that what you see in the event viewer, or you get the error when you try to open the event viewer and Task Scheduler?
  Have changes made to your computer recently, as new hardware or installed software or an update / upgrade to software or drivers?  Have you tried to do a system restore to before the problem came first?
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know the status of your problem and if we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What does "a parity error was detected on \Device\ide\idePort0" mean and how can I fix?

  I have a Pentium 4, XP SP3, 2 HDs installed, and I don't think I have SCSI but in my registry, it shows the HDs and two CD - RW and DVD drives listed under SCSI and there is no topic such as IDE, Atapi or AT (the area I'm talking about in the registry is: \HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\) so I don't know what is happening in this area...? Anyway, everything else refers to above devices IDE or Atapi etc..

  As well as the above parity error, I noticed a little more that I will add here:

  "The driver has detected an error on \Device\Harddisk0\D controller" (this is an ALL NEW HD)

  "The device, \Device\Harddisk1\D, has a bad block" (it's second HD giving the same error msg, the last HD failed and this is used)

  "The device, \Device\CdRom0, has a bad block" (this is my CD - RW drive, which seems to work very well, it's the DVD player that is not working properly)

  "While validating this \Device\Serial0 was really a serial port, a fifo was detected. The fifo will be used. »

  All of these errors are coming together for the most part. Please help as I just replaced a hard drive failing during the summer, now it is looking like another is a failure, but I want to know if something else in my computer can cause drives to fail, or causing errors in some way, or any other information anyone can give me to help before you start the process of replacing a HD failure (again!)

  Thank you... Denise

  Hi groovydee,

  Method 1

  I suggest you reinstall the controller and chipset drivers by contacting the manufacturer of the computer, check to see if it helps.

  Method 2

  If the previous step fails, then you need to check disk scan on the hard drive to scan and difficulty of bad sectors on the disk.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: While running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this area if all the data available in this area may be lost.

• The system failure error 0xc18a0206 for HP Photosmart c6180 all-in-one of the ink...

  Printer has not been used for a few months... Troubleshooting restart did not work... Warranty has expired and I need to print an urgent... Help, please!

  Go here and follow the instructions:

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1

  Worked for me!

  {deleted content}

  -pojjl

• Error message "Drive has not the ability to access this service" during the conversion to Word online

  With the help of Reader 10.0 used to be able to convert files without problem.

  Hi thill33,

  Old version of the player does not support the acrobat online service.

  You need to install the latest Adobe Acrobat Reader DC Acrobat Reader DC Learn & support, or you can use the online service at https://cloud.acrobat.com/exportpdf.

  Kind regards
  Nicos

• Error code (51) of attachment in Event Viewer

  I keep getting error messages (code 51) and information in my event viewer, along w / other types (it's for a later date), which, in the description

  detect error on device\Harddisk3\D during a paging operation. I found some info saying that Seagates default external hard drive will be Hibernate causes the error. So in the right Manager device - I clicked the usb hub of this hard disk, clicked on management of the power supply and checked the box that says let the computer put the player in standby to save power. It does not solve the problem. from what I can gather is that nobody knows what the "D". I have an internal hard drive that was original crane operators and added the Seagate FreeAgent Desktop drive that is configured without any partition, then formatted as NTFS system volume. Maybe that's the problem? It is an old system w / a few updates in the RAM memory and sound card, 2 GB (RAM), processor Intel Pentium clocked at 2.66 GHz, all wrapped together and became the HP Pavilion 764n. That all sums it up unless we need more information to understand this. Thanks in advance for any help, that everyone is careful not to lend. :)
  Patient with gratitude,
  Wndsurfr61
  PS Yes I know, just upgrade the whole system!

  Hello

  You forgot to mention which version of Windows you are using?

  Generally, the event 51 ID can be ignored safely.

  See the following article for detailed information.

  Information about event ID 51:
  http://support.Microsoft.com/kb/244780

  Concerning

• I get an error, 'the diagnostic system host service entered the stopped state' in Event Viewer.

  Hello

  I have HP Pavilion dv6 - 2138ca Entertainment Notebook PC, windows 7 Home premium,
  in the event viewer, system, on the Details tab tab, it said victory http web proxy auto-discovery service stopped
  in the general tab it says service win http web proxy auto-discovery service entered the stopped state.
   
  Original title: Event Viewer

  Hi ali hamdullah,.

   

   

  (1) what exactly the problem?
  2) when you get this error message?
  (3) have you made changes on the computer?

  I would like more information about the issue.

   

   

  In addition, see the article-

  Suggestions for a question on the help forums

  Hope this helps!

• Received a call from someone claiming to be from Microsoft - error in MS Windows event viewer and warnings

  I just got a phone call from someone claiming to be from Microsoft.  He directed me to go to MS Windows event viewer and County errors and warnings in the Applications and the system section.  Then he asked me to let them access my computer and fix any problems that would be 'crash' of my computer.  When I refused him access said he couldn't help me and hung up.  I do not think that it was Microsoft but are ratings warning and error a problem?  I use Windows XP.

  Kudos to you 1Grizzly, you have made the right choice. Microsoft does not make unsolicited support calls or send emails to customers, offering support.