Dev Alpha B OS blackBerry 10 update

Similar Questions

• Dev alpha may not work after update to OS10.0.6.386

  Hi all. It seems that my alpha dev cannot restart after the update. It takes 2 hours to restart, but failed. How could I solve this problem?

  Revive my dev alpha (which means alpha is turned off or has not started):
  1 disconnect the alpha of the PC
  2. start DM BB 7.1
  3. connect alpha PC
  DM BB cannot communicate with the connected device.
  Note: This will be auto-start your device. Can take up to 20 minutes if the 1st reboot.

  If you have successfully updated to R6, click Cancel.
  Otherwise, click Update, followed by repair, etc.

  On DM, click on connect to the device (status bar below on the right).

• 10 dev alpha smart phone BlackBerry (message app)

  I spend all my app playbook in my alpha from the dev team Blackberry but when I close one of my application (my apps work perfectly), I get this message:

  "this application has generated navigator compliance send messages. Please see the bulletin slogininfo out on termination of app for more details. ''

  Can someone help me?

  Thank you.

  You can also get this just to run the browser sometimes, or do something else that is benign.

  I believe that the recommendation for now is to ignore it, and they can have fixed when doing the update (in about a week, I've heard?).

• BlackBerry 10 Dev Alpha is not updated to 10.1 to 10.2

  I'm trying to update my device BlackBerry 10 Dev Alpha OS 10.1 to 10.2. I'm refernce documentation for it. I downloaded Autoload-DevAlphaC - 10.2.0.1157.exe try to update. But the command line stops without updating. Then I tried with loading auto-DevAlphaA_B - 10.2.0.1157.exe. Here he updates without any error in the command line. But the device does not start after that.

  Then, I go down to the previous version of the OS using the load auto-DevAlphaA_B - 10.1.0.1485.exe. Now the unit start with OS 10.1

  Why is this happening?

  I don't think that Dev Alpha (A) could be upgraded to version 10.2. I have tried both official and leaked OS but neither can start the device again. So currently my Dev Alpha holds only still 10.1.1485.

  If you really want to try 10.2, try using Dev Alpha B/C or official Z10/Q10.

• BlackBerry 10.0.09.1675 Dev Alpha Loader not found

  Someone check it please?

  The URL on:

  Update the software of the device BlackBerry Dev Alpha 10

  Does not work here.

  The charger is not download for me either. Give him a little time since they just went live with it if.

• How to install the BlackBerry Java application in BlackBerry 10 Dev alpha

  Hello

  Does anyone know how to install the BlackBerry Java application in BlackBerry 10 Dev Alpha. I am able to wear an Android app in worms BlackBerry Dev Alpha 10. But there is no idea to install application developed with BlackBerry Java SDK 7.1 in verse 10 BlackBerry Dev alpha.

  Thanks in advance.

  I guess what pradeep_ch is correct,

  FYI,.

  http://supportforums.BlackBerry.com/T5/Java-development/DevCon-update-BB-Java-is-dead-no-Java-suppor...

  Thank you

• WebWorks app no longer works after update of Dev Alpha

  So I tried to transfer my playbook to the BB DevAlpha application and it worked very well mostly on the alpha of dev, but since the update, I can't open up my application. It will open to a blank black screen just and do nothing at all. In closing, I get an error: "application does not handle the message 'Quit' and was slayed. It seems that the app is the gel, but it could also simply not start at all.

  Nothing appears in the web Inspector, so I think that it is not starting.

  The app was developed originally on the playbook in which she worked well, he also worked for the most part very well (with the exception of a question of content layout) on the BB Dev Alpha of the original OS. But after the update of the OS. It doesn't seem to work at all.

  So I am really confused as to why it suddenly stopped working.

  What is wrong with him?

  Read this:

  https://developer.BlackBerry.com/HTML5/documentation/getting_started_with_bb10_ww_sdk_2007056_11.htm...

  For each web page in your application, you must include a script tag that links the webworks - version > .js file:

  You must copy the webworks - version > file .js in your application. Make sure that your application uses the version of this file that corresponds to the current version. You can find thewebworks - version > .js file in one of the following locations, depending on your platform:

  • Windows XP: C:\Program Search SDK WebWorks Motion\BlackBerry 10 version > \Framework\clientFiles
  • Windows 7: C:\Program Files (x 86) \Research Motion\BlackBerry 10 Development Kit SDK WebWorks version > \Framework\clientFiles
  • Mac OS: Developer/SDK/Research In Motion / BlackBerry WebWorks SDK 10 version > / framework/clientFiles

• BlackBerry Dev Alpha insists the point on the Bluetooth connection mode.

  Hello.

  I tried several times updated BlackBerry Dev Alpha to the new firmware with the instructions on the website to update. Make sure that all the steps I did. I have tried but no luck. Desktop software did not update. I tried the troubleshooting, but I couldn't find any chance to try several times and it get messages that he has made available.

  I clicked on update and repair. When you click Repair, no fading, rather office continue to find the update software and finally sometimes found. When it concluded, Office Automation application password for the bluetooth connection (I'm sure bluetooth was disabled on device and my laptop) and it continued just as the device was only pretending to be connected with bluetooth. Then it starts to download. But even once, it never ends.

  I already have:

  > Remove the registry as indicated

  > set the USB for windows

  > enable development mode

  > set file sharing on

  > run the troubleshooting steps.

  No luck, I found . Everyone knows the same symptom?

  Yes of course. My Dev Alpha is updated at the moment. Even though she insisted update on Bluetooth connection mode, when install just re - check again if the connection is available and I just reconnect the device to continue the installation.

• Video HTML5 don't play online on Dev Alpha after update to 10.9.9.339

  Dev Alpha used to play HTML5 videos inline (similar to the PlayBook), which has helped some cool design if you were paying attention.

  After the update to 10.9.9.339 videos are no longer play online (the device trying to play their full-screen and displays the video controls even if it has not been specified according to the HTML5 specification), and the layout is broken.

  I wasn't able to find a way to force videos to play online as before, nobody knows how to do this on a device BB10?

  Here is a simple example of HTML code:

  
    
  

  Grateful for your help!

  Check out this thread:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/HTML5-video-issue/m-p/2085959/hi...

• Dev Alpha OS update?

  Does anyone know how and where to get the OS update to the device Dev Alpha?

  Here is the page: https://developer.blackberry.com/blackberry10devalphas/update

  If you have problems watching this forum http://supportforums.blackberry.com/t5/Testing-and-Deployment/DevAlpha-not-updating-on-Desktop-Bundl...

• bb10 dev alpha update

  Hi friends
  recently I tried to update my bb-10 dev alpha, but downloading the modules, he hanged the 37 module.
  Please help solve this problem.

  Thank you
  Tushar

  See the discussions on:
  http://supportforums.BlackBerry.com/T5/testing-and-deployment/BD-p/Testing_and_Deployment_of_Applica...

• Strange behavior of audio subsystem after update Dev Alpha 10 to 10.0.9.388

  Hello world!

  Has anyone noticed a strange behavior of the behavior of 10.0.9.388 audio subsystem firmware. Recently, after firmware update Dev Alpha 10 to 10.0.9.388 subsystem audio misbehavies in the following way:

  (1) if the external headphones/speakers connected to the audio line-out looks to be preprocessed by low-pass filter and surround effect. The device reported by AudioManager is/dev/snd/pcmPrefferedp. Would it be a bug in formware and re-routing audio internal speaker to the line-out socket did not exclude specific pre-treatment?

  (2) on the previous firmwares if audio goes out of the internal speaker and then the helmet is connected to Jack line out change of itinerary was seemlesly happening and he kept playing with headphones without additional measures in the application. Now, peripheral audio is not consume audio samples and so crashes until it is closed and reopened.

  On the previous firmwares were not all the problems of this kind. Would be - what a few unlucky flashing firmware try (if it is still possible) or bug of 10.0.9.388.

  It will be good to hear comments & thoughts about these questions.

  Best regards

  Dmitry.

  I suggest to create two entries Issue Tracker: https://www.blackberry.com/jira

• Dev Alpha Red LED flashing (10111011) after update 10.0.6.545

  I upgraded my Dev Alpha 10.0.6.545 today and after the update has been done the WiFi is connected but when I tried to browse it wasn't working, so I decided to restart the device to see if, after this, it would work. When I tried to turn on the red light started flashing on the next in the sequence 10111011. I tried to repair the unit by using the Software Desktop 2.4.0 (version 16), which is the same one I used to update the Dev Alpha.

  He began to download the firmware to fix the device, but when it finished and started to install it collapsed it and wasn't moving forward for ~ 1, then I removed the unit and tried again (3 times) and it's the same thing.

  Any ideas?

  Seriously guys, 10 is my new lucky number. On the 10th try to repair it it fixed within 10 minutes.

  You must be persistent for Dev Alpha updated to work as much as I've seen it here by searching on the forums... haha

• The driver installation failed BlackBerry Dev Alpha 10

  When I plug my dev alpha bb10 into my computer, it says driver installation failed. Office software Blackberry cannot pick it up. What should I do?

  Try going into the menu alpha dev (small gear top-right).  Go to storage & sharing.  Set the «Connect to Windows» USB connections

  Who can help, mines on auto and never given trouble.  There's a first time for everything.

• The skin lack of asset Classes after Dev Alpha update 10.0.9.1103

  Ouch, last night I presented version of my app BB10 - this morning I am updating my Dev Alpha and the app works more... :-(

  It seems that the problem is with some qnx.fuse.ui controls:

  When I create a drop down list I get this error:

  Error: Skin Asset Class with identifier scroll_bar does not exist!
      at qnx.fuse.ui.theme::ThemeBase/getSkinAsset()[E:\hudson\workspace\BB10_0_09-AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\theme\ThemeBase.as:67]
  

  And for the SegmentedControl of it:

  Error: Skin Asset Class with identifier segmented_control_background does not exist!
      at qnx.fuse.ui.theme::ThemeBase/getSkinAsset()[E:\hudson\workspace\BB10_0_09-AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\theme\ThemeBase.as:67]
  

  I updated to beta 4 of the SDK and checked that qnx.fuse.ui.skins.QNXSkins is packed.

  My own code is no not no matter what count, I was going to just to use the default value.

  Does anyone know what I can do to fix this?

  Anna

  My app: Get set - get up!   Get ready for the revolution snooze.

  Inspired by a known issue with 64-bit Win mentioned in the release notes for the beta 4 SDK, the DONKEY just removed from the packaging and the path of construction, cleaned the project and added fees (4.6 FB) - and now everything works!

  (Note that my previous SDK installation has been at the same location as new and my path to the donkey was exactly the same as it is now, in C:\Program Files (x 86), so if anyone has weird questions it might just be useful to import donkeys even if files program Program Files (x 86) vs problem described in the release notes does not apply.)

  My app: Get set - get up!   Get ready for the revolution snooze.