Developed a playbook app need advice now on the targeting of future devices.

Similar Questions

• Need help now for the live installation

  Need help now for the live installation

  Hello

  As described in the question, I understand that you need help. I will definitely help you however, I would be grateful if you could help me with more information to better understand the problem and resolving it.

  1. What is the problem you are experiencing during installation?

  2. That you install? Any software or operating system?

  3. How you try to install the software/Os/application?

  If you need live support from Microsoft then you can click on the link given below and check if it helps.

  https://support.Microsoft.com/en-us/contactus/

  Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.

• Need advice on choosing the right model

  Hello

  I bought my first laptop a year before. It's a Dell Studio. Shortly after unpacking, I found there room key problem, so I replaced it with an Inspiron, who just turned the problem of mouse pad.

  Now I need to buy a new laptop of a friend and of course Studio and Inspiron are not my choice for known issues. When I did research on the XPS, I found that there are too many graphics and cooling fan problems. Thus, all models of Dell have known problems. What are my options now?

  Although Dell warranty offer, complete replacement is valid only up to 20 days. Not to mention the stress returns and replacements.

  With these known issues, I'm not ready to pay more than $500 no matter what configuration so that never.

  All honest advice or offer will save Dell the passage of my choice to ASUS.

  Thank you

  Samia

  In all honesty, is not a single computer system already in existence that had no "known issues." Everything has known problems. So take with a grain of salt "reports". There is always more complaints than praise on any system. Except for maybe the computers Apple, because they have been known to remove discussions in the forums complaining of problems. It is also interesting to note that many system actually mutually use the parts. Dell uses, in many cases, RAM Samsung, for example. So, sometimes failure is not needed due to the company (Dell, HP, Samsung, etc.), but the OEM of this particular part. Supported products and services is important to consider. How a company handles a problem that a customer is often more important than the cause of the problem in the first place.

  I would recommend a XPS if you consider it, but there are a lot of different variables. It would be useful to learn more about what your friend wants a system. If your friend is looking for a laptop with a power, but not looking to be a great player, then I recommend then XPS 12 or XPS 13. The 12 would be with the convertible screen to make a Tablet when necessary. 13 is fine if you are not concerned about the convertible display. Both systems are light and take a small footprint while having a good power behind them.

  Important note: I highly recommend to buy a protection plan with cover against accidental damage. It is usually fairly inexpensive, and from personal experience, I can testify to his interest. I have two children and I replaced my system several times during. Of course, it's a pain to have to go through the process, but the pain and hassle is less than having to repurchase all simply a system.

  If your friend has specific needs or need a system, or if there is any other questions, let me know and I can do my best to help.

• Need advice to download the drivers for windows XP for Dell XPS M1530 model.

  I formatted the model dell XPS M1530 with Windows XP, but facing difficulties to find the drivers for the same. Wireless, video, audio, nothing works.

  Hello Husna_naim,

  Try this driver.

  Description: INTEL MOBILE PM965 EXPRESS CHIPSET. VERSION 9.0.0.1008
  .

  Audio driver:
  Description: Sigmatel STAC 92XX C-Major HD Audio. Worm: v.6.10.0.5614, A03 Date: 6/13/2008 size: 8 MB
  http://ftp.us.Dell.com/audio/R171786.exe
  
  Video driver:
  Description: nVidia GeForce 8600 M GT

  Wireless network drivers
  Description: Intel PRO/Wireless 3945ABG, WiFi Link 4965AGN Network Connection Ver: 12.0.4.0 Date: 8/1/2008
  http://downloadmirror.Intel.com/16625/eng/12.0.4.0_v64.exe

  Network driver
  Description: Marvell 88E80XX 10/100 Ethernet Controller worm: v.10.60.6.3 Date: 2008-04-29
  http://www.Marvell.com/drivers/files/yk60x64_v10.61.2.3.zip

  Utility remote control function keys, connection Wi - Fi Catcher,.
  Description: Dell QuickSet worm: v.8.2.20, A09 Date: 3/27/2008
  http://ftp.us.Dell.com/app/R182249.exe

  Bluetooth driver
  Description: Dell Wireless 355 Bluetooth 2.0 + EDR Module Ver: v.6.0.1.3100 & FW216, A00 Date: 26/01/2007
  http://ftp.us.Dell.com/Network/R140135.exe

  Hope this helps you.
  For additional references on laptop drivers associates. www.station-drivers.com www.laptopvideo2go.com
  Thank you and best regards.
  codescientist.

• Need advice - shortcut on the desktop, security warning.

  I went through tons of stuff from igor, nancy, jsmith, Weaver, jasper, giles, etc...
  I'm just a designer in my team, but we had just started using javafx 1.3 when 2.0 came out last year.
  We have our application running javafx2 in the browser or by the start of the Internet link, but a user experience I really want the app to slip to drop on the desktop browser, close to create a shortcut on the desktop action back.
  We had him in fx 1.3 but the programmers tell me that it is not available in fx 2.0.
  Is this true? I can't get a shortcut created more? or perhaps have not thought of another work around them?
  
  Also since I was attention, we always get up to security warning popup "digital signature of the application cannot be verified" at startup.
  I'd love to get rid of it. If I read correctly, even if we pay for a certificate, he appears always just with our name.
  We persist info request as the theme users and we allow to paste into the text boxes, but that's all.
  I read that we cannot run in the sandbox if we use the "local file system" or "Clipboard", but I want to make sure that that's why we get the warning.
  
  Thoughts?

  Creating a shortcut worked for me JavaFX 2.1b16, JDK7u4ea

  I generated a jnlp and an html for a NetBeans 7.1 project file.
  NetBeans placed the item shortcut in the wrong place in the jnlp, so I moved it in the sub node.
  I also set the update policy and check them both forever rather than background to help test.

  
  
    
      
      John_Smith
      Sample JavaFX 2.0 application.
      
      
    
    
      
    
    
      
      
    
    
      
    
    
      
    
    
    
  
  

  I modified the html file generated from NetBeans comment the built-in jnlp file so my edits would be picked up:

  
    
  
  
  
  
  
  Test page for ShortcutTest
    Webstart: click to launch this app as webstart
  

• Need advice to change the Flash player in publication settings

  Hi, I'm on a mac and you have not updated my OS from 10.5 to 10.6, so when I upload a named file in Flash CS5 it will not play because she needs the latest flash player that uses OS 10.6.

  So what I get is that can I go into the settings to 'release' and change the Flash drive of 10.2 to an older version and then this work.

  Also, should which version I change to? For example you could choose Flash Player 5, 6, 7, 8, 9, 10 or 10.1?

  Do I have to modify the "actionscript" too? 3.0 to 1.0 or 2.0 or is it not necessary?

  Any help/suggestions are appreciated.

  In general, Flash will warn you that your file contains features that will not support the selected player, so if you don't get any error messages when you select an earlier version of the player to publish to, then chances are that your design will work with him.

  You don't want to change the settings of the ACE.  What is the version of AS was used to create the file is the one you specify.

• Need advice to recover the password for WLC 4404

  Hi all

  I can't reset the password WLC 4404 from our site. I followed the steps in the document from cisco. Are there other ways by which I can reset the same.

  Note: Can't console SSH, HTTPS and take the WLC.

  Any help will be greatly appreciated...

  Concerning

  Raja

  Here is the DOC...

  http://www.Cisco.com/en/us/products/ps6308/products_password_recovery09186a008071faa7.shtml#pwd-REC-WLC-5-1

  1. once the controller starts, enter the password to the user restore.

  Note: For security reasons, the text you enter does not appear on the console to the controller.

  2. at the prompt enter user name, enter a new user name.

  3. at the password prompt, enter a new password.

  4. at the password prompt enter again, re - enter the new password.

  The controller validates and stores your entries in the database.

  5. when the user prompt is displayed again, enter your user name.

  6. when the password appears, enter your new password.

  The controller connects you with your new username and password.

  Let me know if that answers your question...

  Concerning

  Surendra

  Note the post was helpful.

• App failed to load after the addition of test devices

  Hello

  I made a soft, did a dev ipa and installed on my iPad. Worked.

  But now I need to test it on another iPad as well.

  So I deleted the files mob Prov., added the new iPad and a new mob Prov. files.

  But now the app will install more.

  I made a new app ID > did not work

  I tried to do it again with only the original iPad app > even that no longer works.

  What can be the problem?

  Thank you!

  Restart your iPad and check out them. Also make sure the UDID match.

  Usually this error is due to certificates or UDID lack of files Mobile start-up.

  Recreate the certificates from scratch with the new app ID (do not use ' * ' in the App ID for example com.company. *). Make sure that you have unchecked iCloud in section ID App.

  Set up your devices (Add UDID and device name of the device in the devices section).

  Recreate App with new certificates.

  Remove old syncd APP in the iPad. Sync and install new .ipa

• Satellite A60: I need driver WinXP for the PCI Flash memory device

  Hello

  I have re installed windows XP on my Satellite A - 60 SA63A-002001 and have a problem, try to find out what drivers I need for hardware PCI Flash memory which I do not know what is the name of the device.

  Can someone help me please!

  See you soon

  Grant

  Hello

  I put t know who exactly laptop you have because there are several Satellite A60 - xxx, but I guess that most of them have the same hardware configuration.
  The fact is that the card slot SD on this unit the card Compact Flash, smard card reader slot, are not available. You can only use a PCMCIA cards.

• Help Needed - unpredictable behavior when the targeting of symbols

  Hello

  I created a small site in edge animate that shows how a piece of scientific devices. The site consists of several animations showing the operation of each part of the device and has buttons that have a link to each animation as follows:

  Header - several links to the various components of a piece of the appliance of science

  Content area - 6 different animations contained in the symbols on the timeline

  The problem I have is that some of the links to the symbols do not work, despite the fine search code. Also if I click on a symbol to play an animation in the timeline, then click it again to restart the animation it don't work and will sometimes load different parts of the timeline. It all seems a bit unpredictable, as some click functions successfully trigger animations as I expect, while others don't or trigger a different animation.

  I want to know is if there is something I am doing wrong and if this can be solved? Or by the presence of several different animations on the timeline I am ask edge animate to do too much? I didn't know if I'd be better by creating a Web site in Dreamweaver (or another code editor), and then import all edge animations animate individually?

  Any ideas / help would be very appreciated. I understand that it is probably difficult to understand exactly the problem without seeing the files.

  
  Thank you very much

  Ross

  Hey Ross,

  Really, it depends on where you are issuing orders. Using getStage is fine (but not necessary if your element of the caller is in the same symbol, that is, if the item is part of the main stage - in this case, just use sym), but when you use getStage(), there should be nothing between the parentheses. So, if there is an instance of the symbol on the stage named 'separation' and you want to play, use this:

  sym.getComposition () .getStage () getSymbol("separation").play ();

  instead (which was your code above):

  sym.getComposition ().getStage("separation").play ();

  However, if the 'separation' is a label on the main timeline, you want to play from (and you fail to do something on the main stage), then use this:

  sym.getComposition () .getStage () ("separation") .play;

  HTH,

  Joe

• PlayBook app signing of code required now?

  I watched the latest installment of the webcast of the Playbook the other day and they mentioned that after mid December code signature would be required for applications Playbook.

  Is this correct? I am trying to find some information on how to code sign Playbook apps but have failed to find anything.

  Code signing is now required if someone have some info about code signing in Flash CS5 it please?

  I already have the signature keys of previous Blackberry apps so just need to know the method for Playbook.

  Thank you!

  Code signing is not yet released. You can submit your application without a signature.

• Need help developing a Playbook application

  I need to write a user interface application based for playbook that needs to interact with C++ code

  an existing application of the playbook.

  I was wondering what would be the best option

  #1 develop the user interface using native C/C++ SDK - interface with C++ application code

  #2 develop the user interface using native Java SDK - Java interface for my C++ application

  #3 develop the UI using AIR - use a feature of the NDK to interface with C++ library code.

  Option #1 seems straight forward. Option #2 and #3 might need an interface to call a C++

  methods of Java or AIR.

  As I'm new to developing Playbook applications please let me know what would be the best option.

  The PlayBook has no support for Java outside the Android player, resulting in applications with a feeling distinctly not native.

  However, AIR has an interface fairly good native extension let's you call native code. AIR also has a current user interface infrastructure which is very good.

  The native SDK currently has no native toolkit UI and will not be until the release of Cascades. So if you design your user interface with the native SDK, you will need to bring your own UI toolkit. You'd probably want to focus on Qt.

  So, unless you are already a Qt or willing developer to wait for waterfalls you probably want to do UI in the AIR.

• Development of Playbook (Qt4.8); app configuration data storage

  Hello

  I'm developing an application of PB using Qt4.8. I would like to know where I can store configuration data. The link http://supportforums.blackberry.com/t5/Adobe-AIR-Development/BlackBerry-PlayBook-File-System-Layout/... gives to think that the folder 'data' is mapped in $HOME

  This means that, in my app, I can simply copy config data in ' ~ / appConfig.dat ' (i.e. tilda oblique which is a unix convention to go to the home directory)

  See you soon,.

  Ben

  "You can store configuration data in the app storage directory that can be accesed by using the access/accounts/1000/appdata path / namespace.application data.   You can also use system browser in the IDE to see the application directory structure.   I've included more documentation about this below.   Even if it's for BB10, most of the details also apply to the PlayBook.

  https://developer.BlackBerry.com/Cascades/documentation/device_platform/filesystem/

• I changed the permissions of folder to % ProgramFiles%\WindowsApps, now all the startscreen apps do not work, I need to reinstall windows?

  I changed the permissions of folder to % ProgramFiles%\WindowsApps, now all the startscreen apps do not work, I need to reinstall windows?

  I managed to fix it by adding 'All the Packages of Application' to the list of permissions

• I used the 30 day trial on the (CC) photoshop and now I bought the app 1 month only downlowd the monkeys of lightroom and to show that I need to buy the CC, what to do?

  I used the 30 day trial on the (CC) photoshop and now I bought the app 1 month only downlowd the monkeys of lightroom and to show that I need to buy the CC, what to do?

  Disconnection of the step is mentioned in the link below:

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Even after disconnection and signing in if you are still having the same issue, let us know if you use Windows or Mac computer?

  We will have to check once a Hosts file.