Development of the app

Similar Questions

• I have an iPad 2 Air, version 9.2. Whenever I have delete an app that has problems and then try to reinstall it, it simply returns to the iCloud as I sent it, with the remaining problems. How can I reinstall the app without problems?

  I have an iPad 2 Air, IOS 9.2.  I deleted (uninstalled) an application that follows my use telephone and internet for me, because it stopped working.  Whenever I deleted an application he's apparently going to iCloud, and put it back, it simply sends down, warts and all, as happens with this one. How can I get the application in a "clean" State, under its previous problems?

  Deleting an application does not send it to iCloud, and it deletes your system actually.  The problem is that the defect in the application has not yet been set by the developer, and your relocation simply recovering the defective version of the app on your iPad.  Expect that the developer of the app has a new version until you try to reinstall.

• A link to download the development for the LV 2009 64-bit software

  We have a license for the 32-bit version of the development and the app Builder. According to NOR gives us rights to the 2009 64-bit also. I can't find a download of the system Base 64 bits 2009 dev. I see F2 and F3 patch? I guess that there is a basic first installation, then the patches. Any help is appreciated

  Steve

  Looks like it should be: http://www.ni.com/download/labview-development-system-2009-sp1/3343/en/

• Smartphone App World for blackBerry error - not available in the App World updated

  BlackBerry has sent me a message that an update was available for one of my apps game 'shoppers paradise '.   When I click on the link to download the upgrade, it gives me an error message that the upgrade is not available via App World.

  Is anyone else having this problem?  BlackBerry is working on this issue?

  Anyone, please help...

  Thank you

  Bob

  Hi and welcome to the Forums!

  Could have happened to several things:

  (1) the proponent has misidentified something and the AppWorld catalog is messed up now

  (2) RIM has made a mistake and the AppWorld catalog is messed up now

  (3) there may be some technical problem that it blocks

  (4) I don't know there is more...

  As to your question:

  BOBJ says:
  BlackBerry is working on this issue?

  It is impossible for anyone here to know the answer to this. What I suggest is that you contact the developer of the app and report it. They have a different channel in RIM thanks to which they can increase getting AppWorld corrected to properly distribute their application.

  If you want to degenerate into RIM, you through your formal support channel - your carrier.

  Good luck!

• impression of the app squares recipes

  How can I get my all in one printer hp5510 to print receipts from my ipad when you make a transaction of sqare app?

  The printer and the iPad would be able to print via AirPrint. This is where you have the iPad on the same network as the printer and make sure that there is a check mark next to the same network as the printer. Then make sure that 'Apply to join other networks' is turned on too. All this would be verified under settings > Wi - Fi on the iPad. If the app can print via AirPrint would have been determined by the developer of the APP as AirPrint is not "Secure". The best route to take in the exploration of the possibility for the app print would be to contact the manufacturer/developer of the application you are trying to print from.

• Impossible to download the App Builder .ipa files

  Hello

  When I want to download the development of the App Builder .ipa file, I get this error message (see screenshot):

  in English: "cannot sign the application, verify that the certificates are valid and try again...". »

  My certificates are quite valid, I don't have any message of error at each step, I have two certificates ready p12, explicit AppID and 2 mobileprovision file.

  I've renamed ony with all lower and uppercase, without space, put items to update several times... but there is always this error message.

  I am Member creative cloud, so I also tried a disconnect, leave Indesign, and then opening again, connect via Folio Builder, then choose "create an application" (with the App closed Builder). Did not work.

  What should I do? Help, please.

  

  Solution found!

  I checked (in the folder of the application generated in the Library/Preferences/com.adobe.ViewerBuilder/Local store and realized that file .folio names still used the old article names (= with characters prohibited such as spaces and e).)

  I've renamed them in InDesign (as explained here http://helpx.adobe.com/digital-publishing-suite/kb/download-sign-failed.html ), but apparently the update of the name is not taken into account on the names of the files .folio.

  -Online the only solution is to REMOVE each article (that forbade the characters), then create it again with a good name (no space, without the e). And then left with the app creation process. In this way, the .folio files are correct and I could download the .ipa file.

• subjects of the app is not displayed

  I have built and compiled an aid project (.) CHM file). It works fine on my machine - when I copy the. CHM file in the directory "/ bin" of the application, all the help buttons work fine, the topics appear in the table of contents or index, etc.
  I sent the. CHM file for the developer of the app, and he said it in his repertoire "/ bin". By clicking on the element of main Help menu displays the help system, but individual subjects don't display the table of contents. It gets an error such as the following:
  
  RES://ieframe.dll/syntax.htm#mk:@MSITStore:C:\Program%20Files\company_name\Application_Nam e\bin\help.chm::/specific-topic.htm
  
  Why everything works on my end and not hers? I use a copy of the same beta version of the application as it has...
  
  

  Welcome to our community, tw45

  If you just sent the file owner, chances are that Microsoft Security blocks the file. You must ask the developer to unlock the file. I've got the procedure described at the link below.

  Click here to see the steps

  See you soon... Rick

• Developed a playbook app need advice now on the targeting of future devices.

  Hello

  I managed to develop a playbook using FB 4.7 and 4.6 Flex application (AIR 3.1). I use the latest version of the SDK which is 2.1.0. So my question is,

  1-will my app do support version 2.1.0 + of the playbook? or lower versions too?

  2 - this application even support other devices QNX? If so, what are these devices (I see 4-5 devices in the form of additional device) and how can I do same app also runs on these platforms.

  3 - my app is an application of children where children will be able b create avatars, now the requirment of content generated by the user in the submission form has 4-5 questions and I don't know what to write here, please advice! as my application should not have any issue with "unethical content creation" because he welcome children, now I can't stop users to write something bad in hindi, validate the image...

  Thank you

  clozertou wrote:

  Hello

  I managed to develop a playbook using FB 4.7 and 4.6 Flex application (AIR 3.1). I use the latest version of the SDK which is 2.1.0. So my question is,

  1-will my app do support version 2.1.0 + of the playbook? or lower versions too?

  As long as you don't use any what 2.1.0 - specific API, it should work on 2.0.0. If she does well in the Office AIR runtime, it almost certainly works on the camera too. Note that most of the PlayBook users quickly improve their OS. There are very few people running older versions. See http://news.ebscer.com/2013/04/playbook-users-still-on-newest-os/

  2 - this application even support other devices QNX? If so, what are these devices (I see 4-5 devices in the form of additional device) and how can I do same app also runs on these platforms.

  You have to adapt your user interface, graphics, splash screens and icons to work on various resolutions and reports l / h. New appliances BB10 have 768 x 1280 and 720 x 720 pixels and a much higher density of pixel resolution. Buttons should be about twice the size (in pixels). Try to avoid the absolute positions coded hard & sizes and rely more on anchor and percentage sizes. More information can be found here.

  To test, you can configure your AIR runtime desktop to emulate different resolutions, or use the simulators. Or better yet, try to get a real device.

  The 'other' devices are the BlackBerry Z10, Q5, Q10 (consumer) and devices of Dev Alpha A/B/C (developer). The A10 of BlackBerry rumor may still have a different resolution.

  3 - my app is an application of children where children will be able b create avatars, now the requirment of content generated by the user in the submission form has 4-5 questions and I don't know what to write here, please advice! as my application should not have any issue with "unethical content creation" because he welcome children, now I can't stop users to write something bad in hindi, validate the image...

  Don't know about it. Perhaps ask this above in the forum of developers to the BB world.

• I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I

  I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac

  Hello

  Please see connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• My Lightroom membership had expired, I have come to renew, but cannot develop images in the application. I have to wait so he could treat or re install the app or something?

  My Lightroom membership had expired, I have come to renew, but cannot develop images in the application. I have to wait so he could treat or re install the app or something?

  Hi lausworld,

  Please see the troubleshooting link below.

  Reference: creative judgment Cloud 2015 to return to the mode of trial

  Let us know if that helps.

  Kind regards

  Mohit

• Cannot test the app of newsstand of development

  Hello

  Having recently acquired the company feature we would like to improve our existing kiosk (folio multi with iTunes subscription) iPad/iPhone app to have a custom window. We were informed that this requires us to create a new version (the showcase feature is not available in the App generator for the current version of the application). I created a new version with front, using an adaptation of the sample files here HTML of the library by default DPS application | Adobe Developer Connection.

  This seems to work locally (browser), with the AdobeLibraryAPI.js include commented out; 'hard core' includes (jquery, line of underscores, thorn Ridge, fastclick, main.js) are stored locally, the rest files (that the sample has a structure of type MVC) are served from a publicly accessible web server.

  If I Uncomment AdobeLibraryAPI.js, zip all upward and to include it in my DPS build, it translates into a development file IPA will not - install looks that it syncs with iPad, however it never ends, and all I see in the kiosk is an icon greyed. If I remove the front of the build, it will copy through the fine.

  Are there any obvious gotchas I could be missing, or can anyone recommend a way to debug this issue? Any help would be greatly appreciated.

  Thank you

  
  Toby

  Ah, I think that it is probably a problem all of my own - if I just use the sample zip as a condition, it works!

  I'll have to calculate this one myself...

• RE: field "Publisher/Developer" directly under the name of the app in the iTunes app store/kiosk

  My app was approved by Apple and is now online in the App Store and the newsstand. The problem is that right under the name of the application, it lists my name instead of the name of our Publising company as owner. I looked in iTunes Connect, profile developer Apple and generator of DPS App for a field that has the info incorect in it and no had no chance. I don't want my name on the download page of the App. Does anyone have any ideas where I should look to change this? THX

  Seems that you have personal, not business Apple Developer account.

  https://developer.Apple.com/programs/which-program/

• Creative cloud - you can publish applications developed on a PC for the app store

  I received an email about creative cloud. It looks like something we could use, but we run PCs. You can develop applications on a PC using which can be downloaded from the app store?

  In the FAQ of DPS here http://www.adobe.com/products/digital-publishing-suite-single/faq.html:

  Do I need a Mac OS build and publish a .folio on the Apple App Store app?

  While you can use a Mac or a PC to create a .folio in InDesign, a Mac is required to access the generator App DPS, since it is currently a Mac application only. A Mac is also held by Apple to submit an application to Apple's App Store.

• •2.20: developers 'spamming' the App Store with many versions of similar applications will be removed from the iOS Developer Program

  Hi support them

  My application was rejected by the App store of Apple and the code rejection is 2,20 details as below:

  "We found that your application provides the same set of features as the other applications you have submitted to the App Store; It only varies the content or language. »

  The app review team suggested ""it would be appropriate to consolidate all issues of the same publication/magazine in 1 container app " "

  I was wondering how do I still do i container app magazine?

  Thanks in advance.

  Alvin

  You need a professional license or company DPS. Then you can you do a multi-folio application. A multi-folio application would be the container for all of your magazines folios.

  Digital Publishing Suite help | Understand the different types of applications DPS

• What is the minimum required to show the "optional game controller" in the App Store?

  Game development with unity for the 4th generation Apple TV, we use a plugin that supports gamepads without need of any game controller from XCode framework.

  What configuration minimum necessary in XCode for the App Store to show that controllers are supported?

  The next page of Mac Developer Library doesn't say not big thing to this subject, but the screenshot shows that, at least the necessary key plist is added when you turn on "Game controllers", but seems to not be enough to appear:

  https://developer.Apple.com/library/Mac/documentation/IDEs/conceptual/AppDistrib utionGuide/AddingCapabilities/AddingCapa...

  you're not talking apple in these forums only use other users

  If development issues will probably receive a much better quality of responses if posted in the forum of developers Developer Forum