Device to reset when you use javaloader to load an application

Similar Questions

• When you use word, outlook or any application on the Web, when type 'w: it triggers the function Tab.

  I have a user within our organization with a strange problem.

  When you use word, outlook or any application on the Web, often his typewritten letter T triggers tab.
  As it is to type the tab get triggered when it hits the letter 'T' on the keyboard.
  To eradicate this incident I tried
  1. the new roaming and local profile.
  2 keyboard has changed.
  3. reimagee the machine.
  4 assigned a new machine with a new keyboard and mouse.
  5. checked for ease of access and found that it turned off.
  6 are there any keyboard shortcuts in MS word either.
  Any help will be appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

   

  Hope this information helps.

• Palm TX resets when you use WiFi and BT keyboard

  I hope someone can help me with this.  I just bought a BT of Palm keyboard, deleted the infrared keyboard driver and installed the BT keyboard driver.  But when I connected to the internet via WiFi, my TX recovering as soon as I press a key (any key).  I've tried resets hot as well as to remove and reinstall the BT keyboard driver but nothing works.  Does anyone have any suggestions.  Also, I noticed the alarms on my TX has stopped working at the same time that this question.  This could all be associated with the BT driver?  Thanks in advance for your suggestions.

  Solved my problem.  The conflict was with PowerButton.  Once I deleted it, BT and WiFi keyboard works great.

  Message relates to: Palm TX

• Need to reset the button by default when you use the structure of the event?

  When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect.  I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated.  Is there an easier way to get the button to jump to the top after pressing on?

  The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.

  If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.

• Label of the ASM to name of LUN mapping; Are not even necessary device names when you use ASMLib?

  = Environment details start =.

  OS: Oracle Linux 6.4

  Version Infra grid: 11.2.0.4

  Storage: EMC VMAX

  ASM Lib version:

  # rpm - qa | grep oracleasm

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  oracleasm version came not in rpm-qa output may be because it is part of the Oracle Linux kernel. But the 2 components above are not

  = Environment details end =.

  We have a 2 node RAC cluster.

  We wanted to add 2 LUNS to our data Diskgroup and asked team storage available to both nodes of the cluster.

  After that they provided, the Linux Admin scanned the LUN and powerpath device names were generated. The powerpath device names like SCSI logic unit number names are incremented sequentially. Because, two additional powerpath LUN used to Node1 to a local file system, the names of powerpath were incrementing differently in the two nodes.

  Thus, for the same LUNS emcpowerpath names differed in Node2. Linux Admin did not notice this difference. And he told us the names of newly added from Node1 LUNS powerpath that have been

  / dev/emcpowerv

  / dev/emcpowerw

  But in Node2, the same LUN were appointed

  / dev/emcpowert

  / dev/emcpoweru

  The DBA guess powerpath name these 2 LUNS will be same on Node2, label the discs to help

  oracleasm createdisk DATA17/dev/emcpowerv1

  oracleasm createdisk DATA18/dev/emcpowerw1

  After marking in node 1, the DBA ran scandisks in Node2. But while the oracleasm scandisks in Node2 is running, it does not seem to/dev/emcpowerv and/dev/emcpowerw in Node2. Instead, ASMLib is smart enough to read the LUN ID in Node1 and search devices powerpath with the same LUN ID and labels as Node1. What's it like in Node2, / dev/emcpowert is labeled DATA17 and/dev/emcpoweru is labeled DATA18 correctly, as shown below.

  Node1

  Node2

  LUN ID

  Label of the ASM

  / dev/emcpowerv

  / dev/emcpowert

  873F

  DATA17

  / dev/emcpowerw

  / dev/emcpoweru

  629:

  DATA18

  Confirmed using the oracleasm querydisk Pei/dev/emcpower < x > .

  During labelling using the oracleasm createdisk , since we use the LUN name I always thought that asmlib dealt only with the names of devices (Powerpath name in this case). I didn't know that ASMLib treats ID LUN. If ASMLIB faces in LUN ID internally, then you don't need to have the same name for a particular LUN for disks shared in different RAC nodes? Right?

  ASMLIB contains 3 packs. Oracleasmlib, which is distributed under a license of Oracle user space and is not part of the standard GPL software distribution. Oracleasm-support, which is in the standard repository and kernel driver of Oracleasm, which is included in the core Oracle UEK only or distributed by Red Hat to RHCK kernel. The subsequent RHCK driver requires a Red Hat subscription. You need all 3 installed packages.

  ASMLib doesn't care to the SCSI ID or device names. When you configure a device to ASMLIB, he writes a header special disk in the device, the command scandisk read and identify a device. ASMLIB devices are populated under the tree of device/dev/oracleasm and found by ASM using the default ORCL: device chain.

  Don't forget that ASMLIB does not work with multiple devices and if you use DB-Multipath or EMC Powerpath, you need to blacklist the physical devices so ASMLIB will use powerpath or multipath device instead. Otherwise there will be no failover devices like ASMLIB will simply use the first device found and ignore the other. Check the following:

  http://www.Oracle.com/technetwork/topics/Linux/multipath-097959.html

• MacBook Pro 5.5 crashes when you use multiple applications

  Then my macbook pro 5,5 I upgraded to snow leopard at el captian started planting after that I updated when you use multiple applications (virtual dj 7.0.4 safari 9.1 and the version of microsoft word 2011 14.4.2).)

  I removed the old hdd and put in a ssd 250 GB and a new battery with the snow leopard a long time ago, before I upgraded to the new operating system. It seems to me that what is blocking it is intensive use the safari app and another intensive resources such as virtual dj application.

  I have reset pram/vram and uses firefox now...

  the computer and the new el capitan are beautiful, I really feel like im going to get a lot out of this operating system, and it gave new life to my computer, but the crash problem when using multiple applications is too often. Can I submit some reports if necessary kernel panic?

  Anonymous UUID:

  9C21D886-B7E1-F5A6-463E-8CBCF325C9D9

  Sam May 21 18:31:15 2016

  Panic report *.

  panic (cpu 0 0xffffff80115ce40a appellant): Kernel trap at 0xffffff801192a3b3, type 14 = page fault, registers:

  CR0: 0X000000008001003B, CR2: 0XFFFFEF802CCD9C40 CR3: 0X000000001320B000 CR4: 0 X 0000000000002660

  RAX: 0 X 0000000000000000, RBX: 0XFFFFFF802B945780 RCX: 0XFFFFEF802CCD9C08 RDX: 0 X 0000000000000000

  RER: 0XFFFFFF911BE53D00, RBP: 0XFFFFFF911BE53D20, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF802B8FEAF0

  R8: 0 X 0000000000000000, R9: 0 X 0000000000000003, R10: 0 X 0000000000000000, R11: 0 X 0000000000000026

  R12: 0XFFFFFF802B945780, R13: 0 X 0000000000000000, R14: 0XFFFFFF911BE53E18 R15: 0XFFFFFF802B8FEAF0

  RFL: 0 X 0000000000010282, RIP: 0XFFFFFF801192A3B3, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0xffffef802ccd9c40, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

  MP = 0xffffff8022e00000, phys = 0x1367a000, prev (0 x 7: 0 x 11313000 - 0 x 11400000)

  VP = 0xffffff802b945780, phys = 0x1bd310780, prev (0xb: 0xffffc000 - 0 x 100000000)

  0xffffff8022dff000: oQAAAMsAAAAAAQAAqWwqIgAAAAAZMSk2QACp3wEAIjAAAAAAgAAAAFDw0ND1AAEACwSEgAoDAQNYXJr c9QABAAsMhMAKDwUD0FD5 / PUAAQALDETACg8FA + DQ9fz1AAEACwxEwAIDAQPQ0PX89QABAAcMhIAJAwE DoECKzPUAAQAPDISACgMBA1Bw1vz1AAEADwxEwAoDAQNwUPbc9QABAA8MhIAJAwEDoCCq3OUAAQALDIS ABQ8FA9DQudz1AAEABwxEwAoDAQNYXNbc9QABAAsMRMAKAwEDUFDW3PUAAQAPDETACQMBA9Dwuvz1AAE ADwSEwAoDAQPQ8Obc5QABAAsMhMAJAwED0ODW/AjJ5SKA / / / OB3SEQEAAQBjb20uYXBwbGUuZmxvdy1 kaXZlcgAAAgAAIAAAYG6GEbBzhhHQ8N8i5DsAAO + rd5BTEwACKiaIyrhQFcYNdERSLVmIoD / / / 8IAfI iAAAABwoAAACQb5YRAPnGIu ++ rd4QNdERKMlmIggC8iIoed8iQPbGIhA10REIA/IiuHffIogkcSogNdE RCA7yIgi2ZiKA / / / AAAABgUAAACA + MYicIMAAHySAADvvq3eyLZmIoD / / / 8IBfIiAgAAAwMAAAAIDPI iAAAAAgIAAABotmYigP / / / wMAAAMEAAAAQPjGInCFAABwgwAAcIgAAHBQAADvvq3eKuFAVxA10RGotWY igP / / / 8D4xiLvvq3eCADyIgAAAAgLAAAAEE +. WERg10REISfQiAAAACQwAAAABAAAJDQAAAED5xiLvvq3 eCLNmIghH9CIAAAAEDgAAAJQkcSoq4UBXGDXREaiyZiIAAAAFDwAAAIkkcSrgDuAg7o4JvgAO6u4LS0B A7uDuDACwAADgBOTkDO4OALCwAADgBITkDgze7gCwsABA4ASEDt7vDgCwsABAwOQE7/6/DkDA5ATuAg4 NsAAAC + QEhOzuDw4NsAAAC + QEJOyyDg4C9OT + 4OcOAAAAAABLBITs7uwODg2wAAALBITk7gcODQ4AAAt LBITsfu7n7u4ODktA5Ow + 4A0OALBLQOAA7tPuA7CwAADo0BEA/ycAOPADjz8CoIMdwAzzP AIQBqABwA Y8sxTDvLMUw7gDNAWAQBKAAkAswzAgDMAbQWADIATcACAPgMOBLQVAGgAagDAAvMM4AgAGBgFgBCA8QU OAtgWAIABLAAIECAA4AhgGwEgAAhAB0AAECQADgLYFgAIAAIn4AzQFgEgDDioE4AA6KQzD + AIABgYBYA YgAAnD8/I8wzyPAMOAgAWAOgBBhjzlCMP8yzzDOAIABgBIIkAgPwPDgLYBjgBAA4U6KQDDgLYFgAIAgo Q6XwDAAAA

  0xffffff8022e00000: IUMAABAU4CIAAID / / / 8EALi80BEIAID / / / 8MABp7AAAQAP / / / 8kAPBixxEoAID / / / 8sAOBVxhEwAID ///80ALCUoS1AAID///9EAKBXlCtIAID///9MAAAPlCtQAID///9UAIDJ6CJYAID///9cAGAA4CJoAID ///9sAADQgARwAAAA3YB0ABAAAAB8AAAQAACEAAAAEACIAEBXoAOQAHXTCQOYAHXZCAOgAMt9lwCoAD5 XoAOwAHXZCAO4AAIAAAHAABEAAADEAGhmcwDUAC8AAADkAC9kZXbkBC9kaXPoBGswczLsBAEAAADkCAg A6SL4CID / / / 8CAAAAAIACQAAAAIECQABAAAICQABAAAMCQAAQAAQCQAAQAAUCQMAAAAYCQACAAAcCSA AAAAgCQEAAAAkCRIOAABACdh4AwBICRIOAABQCYh + AwBYCQAAACFoCf / / / + ECVDK6CKICYD / / / + MCQE AAACYCQEAAACsCUAy4yLQCYD / / / UCQIAAADwCf / / / 8sCkgK4CJQCoD / / / 9UClgK4CJgCoD / / / 9kCmg K4CJwCoD / / / 90CgAQAAB4CgABAACECgAA

  0xffffff8022e01000: cAAAAIMAAACbAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AJBweH4AAAAAAAAACAACIBChIiEwKD2r/EgbMAAmkEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwMAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHh8Jx80AJgAAAggAKDQhExR8Fj 8iUdIxJZ9pd9V/5 X/Vf9W/1 X/Vf9l/5r/Vf + V / wAAAgD / DwAAAAAAIf / / / 8A9sYiAgAAAACg0ySA / / / AADgIkABAACgg8YRoFbGEbDE6CLAMyErUMzoImAU4CIAEBAEABAQAOi/dSJkZXZmL2RldgAAAgD/DwA A6xQEAAAAACH / / / PwAAAIA + 4yIwzOgidOOkA1BzgwA42SaCAJGyAADfG4JAkoMALN8bgqBugwCwkIM AkKyNAKCNgwDgUIgAoE + IACBsiACAgogAAISIAMwAAAzu7u7uDgMOALDgwwAADOzg4w4O7jPuM + 7/u7 u / + 7/7u7 + 7 l/uVe5V7t7l3u7d7t3u3e7d7v3u/R7v7u7oLuEu7iLuIg4CDg4gAAgCAQD + P4DDASBozTk Bc4AAICAEQB8SbQ44DwgAN5DDDj3w / w04fysMOKDACCJg /. g04QIEFB5DAAg0gwgsdAMIIJpACCy8gQw0 4sIMPAUDAAQRgQQ8r4EIMNHCDDj0A

  Backtrace (CPU 0), frame: return address

  0xffffff911be53990: 0xffffff80114dab12

  0xffffff911be53a10: 0xffffff80115ce40a

  0xffffff911be53bf0: 0xffffff80115ec273

  0xffffff911be53c10: 0xffffff801192a3b3

  0xffffff911be53d20: 0xffffff80116f634b

  0xffffff911be53dd0: 0xffffff8011927993

  0xffffff911be53ec0: 0xffffff801170f81d

  0xffffff911be53ee0: 0xffffff80116f99e4

  0xffffff911be53f50: 0xffffff80117047d7

  0xffffff911be53f60: 0xffffff8011a27fa1

  0xffffff911be53fb0: 0xffffff80115eca76

  Name of the BSD corresponding to the current thread process: launchd

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel:

  0 x 0000000011200000

  Text of core base: 0xffffff8011400000

  Text __HIB base: 0xffffff8011300000

  Name of system model: MacBookPro5, 5 (Mac-F2268AC8)

  Availability of the system in nanoseconds: 3602233285655

  last load kext to 2442165091688: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f93f64000 size 32768)

  Finally unloaded kext to 2529727624548: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f93f64000 size 32768)

  kexts responsible:

  com Apple.filesystems.smbfs 3.0.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.21.18

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDA 274.7

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.driver.AppleSMCLMU 208

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleMikeyDriver 274.7

  com.apple.driver.AppleLPC 3.1

  com.apple.GeForceTesla 10.0.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleAHCIPort 3.1.8

  com Apple.nvenet 2.0.22

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBOHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 274.7

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleUSBMultitouch 250,5

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IO80211Family 1110.26

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOFireWireFamily 4.6.0

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.usb.AppleUSBOHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  2.2.9 com.apple.driver.NVSMU

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.4f4 17685, 3 services, 18 aircraft, 1 incoming serial ports

  Crush Bus:

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1 333 MHz, 0x02B5, -.

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1 333 MHz, 0x02B5,--

  USB device: USB Bus

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB Bus

  USB device: Apple keyboard / Trackpad

  USB Device: IR receiver

  USB device: USB 2.0 Bus

  USB device: ISight built-in

  USB device: USB 2.0 Bus

  USB Device: Card reader

  Serial ATA Device: Samsung 850 EVO 250 GB, GB 250,06 SSD

  Serial ATA Device: OPTIARC DVD RW AD - 5960S

  Model: MacBookPro5, 5, MBP55.00AC.B03 of BootROM, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, MSC 1.47f2

  Network service: Wi - Fi, AirPort, en1

  Graphics card: NVIDIA GeForce 9400 M, NVIDIA GeForce 9400 M, PCI, 256 MB

  The spare memory that is installed does not respect the specifications of your model (1067 MHz SDRAM.) Please reinstall the original memory, or install the new memory of the correct type.

  Any vendor deemed RAM will be a web form where you can select the Mac model and be directed to the compatible parts.

• When you use Itunes on my Ipod Touch 5 generation, the Ipod is no longer automatically past from one song to another. This seems to be a novelty. There is a button on the RIGHT side of the upper third of the screen where you can choose options but go n0.

  When you use ITunes on my Ipod Touch 5 Gen, running IOS 9.2, he has recently stopped automatically switch a song on one album to another while listening to ITunes. I discovered a button with 3 points to the RIGHT side of each title of the song which, when typed gives a different options for example then played, add up to the next etc.. If you use these all this seems to get worse with more choices that appear. I know that sounds incredible, but I have owned several Ipods that I use just for listening to music. Mine is a 32 GB version that can store a large number of albums, most of which I bought and loaded into my Ipod. A few albums that I downloaded from ITunes. How can I get it from my Ipod to listen to music in the ITunes application without having to select one of the 55 options?

  See if the chapter of the music of the Manual:

  http://help.Apple.com/iPod-touch/9/#/iph3bd017b9

  Next:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• When you use FF/Win7/64HomePremium, I've been HACKED and StartScreen has been rigged and frozen, so the Win was "wiped OUT", then it was I.E.11+Win7/64Ult. : Prior FFprofile is?

  When you use FF/Win7/64HomePremium, I followed my Hacker & sent him a msg: "Tsk, tsk-Hacking'sBadKarma! ' and it made him angry then he faked and froze my StartScreen so a"RESTful"local (who is a drunk)"WIPED"Windows, then - with/without wonder - set I.E.11withWin7/64Ultimate; my backup had not worked since the 5/13 (pirate-at-work?), so can I recover prior FF profile now that I have FF back?

  Hi RingTailFox...

  He seems to have been a rather unhappy and unfortunate episode.

  It is quite difficult to imagine exactly what can happen in the scenario you describe, but it seems unlikely that you'll get everything back.

  Perhaps in the future we must learn some of the basics related to backup and restore operating systems Windows yourself. Is not this forum but see for example

  • http://Windows.Microsoft.com/en-GB/Windows7/products/features/backup-and-restore
  • http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  The Firefox profile may be saved to see

  • Backup and restore Firefox profiles information
  • Also the bookmarks can be saved restore bookmarks from a backup or move them to another computer
  • In some cases, files and folders can be recovered with the special utility programs or the operating system. If your system has been annihilated there is little that you will be able to do.
  • Firefox sync can help if you have used this and had a second device, yet likely to apply in your case.

  You mentioned

   my back-up hadn't worked since 5/13 
  

  What kind of backup is what can you explain more IF you think that you still have it and it is relevant.

• Satellite A60: Sound quality poor microphone when you use the USB phone

  I have problems with the microphone/recording quality on my A60 including but not limited to situations when you use a USB phone. Talk to the USB phone produces a lot of static when it is used with the A60, which is not the case when I use another laptop.
  The two laptops have the same VOIP software and "simplyphone.

  Any ideas what could be the problem? Drivers?

  Toshiba support suggests to see if a system restore will improve things, but I am reluctant to go there for a questionable result.

  Hello

  I don t think that the driver update will help you. The operating system uses the simple common Microsoft USB drivers. I think we should get the problem somewhere else.

  You can try to disable the power save option in-USB hub-> properties > Device Manager. I noticed that if energy saving is enabled on ports USB some external devices could not work with maximum efficiency.
  In addition, you should disconnect other USB devices during the test the USB microphone.
  I think that it of not impossible that some external USB devices might have a negative influence on the use of a USB microphone.

  PS: I found a site interesting on tests of micro USB
  http://www.voicerecognition.com.au/dragon_microphone_review.htm

• I updated my ipad ios 9.2.1 and when you use safari, it crashes

  I've updated 9.2.1 on my ipad and now my safari crashes when you use the keyboard

  Here's my own list of the fixes suggested trying who helped many former users of iPad.

  A warning:

  I make no warranty, express or implied, that any PART of my patches suggsted or solutions will fix/restore each older iPad on his former status of operation

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  For additional questions to Safari, try disabling Safari Suggestions found in the settings app in the control panel settings of Safari. Press Safari and in the right panel, look for the Suggestions of Safari and turn this option off to disable this feature.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• IMAQ Grab Acquire.vi error when you use an external trigger on a card NI PCIe-1433 (sync problem?)

  According to my recent post on getting up and running with the NI PCIe-1433 camera link card, I ran into a bit of a snag.

  When you use the internal trigger on the camera, everything works 100%. I can view all the data from the camera in MAX as well as in the labview project. However, whenever I have set the mode switch is where things start to fall apart.

  What I have confirmed:

  -Camera is switching between inside and outside triggering.

  -NI PCIe-1433 camera link card is set up properly. While in external mode, I can trigger the camera by using a function generator and check the wire to the MAX. Everything works fine.

  When the unit is in external mode, the function Acquire.vi enter IMAQ - my mistake VI. The error is:

  Code :-1074397150

  The possible reasons for a timeout.

  Now, I have it set up so that a mistake here will not end the LabVIEW file. Sometimes, data of interest makes however (about every 10 seconds-ish). So what seems to be the case, it's that this external trigger signal is not in the lineup when the clamp is attempted. Is it possible to synchronize these? May reference the trigger signal external sort in my LabVIEW project so that the clamp is performed only when that trigger impulses?

  So I solved my problem. He was in time. The external trigger that I used for the device was simply too slow. I was initially using a trigger from 2 Hz to be able to view the values changing on LabVIEW probes. But it was enough to get enough data to move above the camera cable to assemble a picture and kept it in time. Travel up to 9 kHz solved the problem. No adjustment to the camera settings or LabVIEW code was necessary.

• Cannot move all the files as windows explore crashes - it happens every time when you use an external hard drive (several readers have been tested and work on other machines)

  I need to move files on my laptop, but windows crashes Explorer everytime I try this. This also applies when you use an alternative program to explore. It didn't happen last week but regularly spent the last six months. It is now that I need to migrate these files (mainly the images, but also the music and office documents).

  The error in the Event Viewer log States the following: start the application failing application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, offset 0x02db07e0, process id 0 x 1650 error, time 0x01ca547fd1de6851.

  Thank you

  Make sure that the device is compatible with Vista, the Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  You need to find the NAS device and the NICs in particular - but it would not hurt to look at all the when you're there.

  Go to start / Control Panel / Add Hardware and select the first option (recommended) to see if the system can detect the device.  If this does not work, choose the second and provide the information requested on the device.  You will be asked for drivers - have their practice.  Follow the prompts to install the device (NAS).  Make sure that it is plugged in and turned on when you do so, or he not be recognized.  It's the hard way of installing a hardware device, but your system obviously isn't automatically recognize it then do it manually. Here is a brief tutorial on how to do so: http://www.web-articles.info/e/a/title/Windows-Vista :-Running-the-Add-Hardware-Wizard /.

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• TWAIN errors when you use Canoscan3200F on Win7

  I get error TWAIN when you use Canoscan3200F on Win7. Tried to use Canoscan Toolbox 4.5, Irfanview 4.32 and Windows Fax & Scan - all give variations of the TWAIN error, bascially do not recognize the scanner, even if it looks OK in Device Manager.

  CanonScan said - could not open TWAIN source.

  IrfanView, said - rmslantc.dll missing.

  Windows Fax Scan & said - no scanners not detected.

  Hi the string 1,

  Make sure that a certain folder path is in the PATH environment variable. Follow these steps:

  (a) first, to determine the correct path to add to the PATH environment variable.  Look in C:\Windows\twain_32 and there should be another folder (example:-CNQ4803). This is the way that is needed to be added to the PATH environment variable. C:\Windows\twain_32\CNQ4803

  (b) alter the PATH environment variable. Go to Control Panel, Systemand then choose Advanced system settings in the left column.

  (c) this will bring up the System Properties dialog box (it should already be in the Advanced tab).

  (d) at the bottom of this dialog box is a button Environment Variables .  By clicking on this button to display the Environment Variables dialog box.

  (e) in the bottom panel, scroll down until you find the variable named Path.  Select it and then press the Edit button to bring up the Edit System Variable dialog box.

  (f) in the Variable value text box, scroll all the way to the right, and then add the C:\Windows\twain_32\CNQ4803 path that was determined earlier.  Be sure to separate this value by a preceding semicolon.  And also be ensure not to make further changes to this value. Click OK.