Diagram of generic authorization for items?

Similar Questions

• Schema authorization for users stored in a database table?

  Hello!
  
  I'm trying to find how to make a diagram of authorization for users of the database.
  
  I did one of my current application authentication scheme, I named it "Authentication for database accounts", and the type of plan is 'Database accounts'.
  
  A word of explanation:_
  I have a table in my database, named "USERS". Inside this table, I have the following columns:
  -USERNAME (NUMBER)
  -USERNAME (VARCHAR2 (50))
  -PASSWORD (VARCHAR2 (50))
  -E-MAIL (VARCHAR2 (200))
  
  For that matter, I'll take a user from the example. The user name is the USER and the USER password. Email and username don't matter here, but let's say that the user ID is 1.
  
  What I want:_
  When you go into the application and you are prompted to connect (page 101), then I want a user to be able to connect with the data that has been stored in the USERS table.
  So, on the login page, the user will enter USER as user name and USER password. The authorisation scheme must verify whether or not this user name and password match the data in the USERS table. If so, he must sign the user with the credentials entered by the user (who are the USERS and USER).
  I also want the username to be stored somewhere in the application (if possible, in a part of the application).
  
  How can I do this? I've never done a prior authorisation scheme... I'm not too good with PL/SQL either, but I'm working on this part.
  
  Any help is greatly appreciated.

  Hi Magali,.

  In your existing structure of the table, add a column more called ROLE as MANAGER, CLERK etc then you can create the authorization on the basis of the ROLE not not based on the individual user

  Select your application and then go into shared component
  under Security, select schema permission and create

  Step 1: create the authorization scheme
  (1) create the authorization scheme = zero
  name 2) = IS_MANAGER / / the name of
  schema type 3) = exists SQL Query
  (4) SQL Query is 1 select table_name from where upper (username) = upper(:APP_USER);.
  or if you have the role of your table then try this
  (4) SQL Query is 1 select table_name from where = 'MANAGER' ROLE and upper (username) = upper(:APP_USER);.
  (5) identify error message appears when the regime violated = your error message.

  your authorization scheme is now ready.

  Step 2: assign this regime to the components of the page

  modify any component of your page like region, button, article page etc...

  where you will find the guarantee under what you have permission regime selectlist, than choose any schema that you want to apply.

  Permission schema = IS_MANAGER / / that I had created in example above

  For tabs
  change your tab, then you have permission and do the same thing as above.

  In this way, you can create a permission scheme and assign to the components page etc...

  Hope this will give you an idea on the authorization scheme

  Thank you
  Jitendra

• I did purchase for items in pokemon game come on I want a refund because the elements do not work as they were announced because of problems in the game

  I did purchase for items in pokemon game come on I want a refund because the elements do not work as they were announced because of problems in the game.

  Help, please

  You can go to http://reportaproblem.apple.com and report problems with the App and its purchases, as well as a refund.

• I go to sync my phone and he said: ' the iphone couldn't sync because this computer is no longer allowed for items purchased on this iphone» When I go to allow it is said that it is already permitted. ios9.3.1, iphone 5 s

  I go to sync my phone and he said: ' the iphone couldn't sync because this computer is no longer allowed for items purchased on this iphone» When I go to allow it is said that it is already permitted. ios9.3.1, iphone 5 s

  Hello dinukago,

  Thank you for using communities of Apple Support.

  Since your post I understand that you get an error that your computer is not authorized for items purchased on your iPhone.  As you tried to allow already and know that your computer is allowed, then it seems that you have the content of another Apple ID on your iPhone.  If you have any other Apple ID then please allow your computer so that it be synchronized.

  Allow your computer in iTunes

  Take care.

• the iPhone couldn't be synchronized because this computer is no longer allowed for items purchased on this iphone

  I know there are several solutions for this problem, I spent weeks trying different options but not solved my problem.

  Here is my scenario, I have a Mac Pro and my iTunes folder was on another internal HARD drive, I used Yosemite, I picked it up and then clean up El Capitan, then I launched iTunes and linked to my old iTunes library, so far, everything is OK and I can see my music, videos and applications, then I connected my iPhone 6 and backed up to my system up to what we want to do the sync and that when the context menu is displayed with the following error message:

  the iPhone couldn't be synchronized because this computer is no longer allowed for items purchased on this iPhone

  I followed various solutions such as:

  Meet a disconnection on iTunes in my iPhone to my computer, the connection of my account in iTunes, and restart the system and iPhone, then from iTunes and reAuthorizing my computer, and then try to sync and I always get the same error above.

  It's really frustrating, because I even created a new library to see if that would help and it has not yet.

  I've only used an Apple ID account, I never bought any music or application to another user.

  Any help would be much appreciated.

  I've only used an Apple ID account, I never bought any music or application to another user.

  This message refers to the items purchased on the iPhone.  The following synchronized on your old Mac, who has apparently been authorized for purchased items.  Your old Mac was authorized from your ID Apple and another Apple ID (someone else)?  If so, perhaps there is something on the iPhone that was purchased with this other Apple ID.

  In all cases, what are the options given with this error message?  If an option is to eliminate items that are "is no longer allow", let iTunes do it.  If you have never purchased items with another Apple ID, you have lost nothing.

• Windows XP Setup: Netframework 2.0 SP2 on Windows server 2003 and generic process for win 32 services

  I have Windows XP. Since May 15, when I open and close my PC, the same updates seem to be installed: Netframework 2.0 SP2 on Windows server 2003 and Windows XPx86 KB2804577 and successfully installed several times per day, approximately 33 in total so far. Is it OK? How can I stop it?

  In this time (also some time before)

  When I open my PC a pop up displays: generic process for win 32 services... to allow or not allow.

  Then: I have not authorized it.

  I will allow, when he will appear again?

  and that's why the same safety NET Framework 2.0 appears again and again, when I open and close the PC?

  What should I do?

  Kirsten

  Dot Net 2.0 has an update to 'fix' his kb928365

  Also, the 2.0 is old enough, have you tried to update for .net 3.0 or 3.5

  Try this link to update 2.0, youre problems will probably end.

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=21

  Also, once installed, go to windows update...

• DO YOU KNOW HOW TO CLEAN THE TASKBAR BEFORE THE ICONS FOR ITEMS FROM THERE?

  HELLO CLASSMATES.

  I WOULD LIKE TO KNOW HOW TO CLEAN THE TASKBAR BEFORE THE ICONS FOR ITEMS FROM THERE.

  PLEASE, I BEG YOU.

  Thank you.

  JOE

  I had the same problem.  Mine was up here an easy solution.   Right-click on the taskbar and display the properties.  Check hide them icons inactive and click Customize.  I had multiple entries in the items being passed, including volume control icon.  Remove the elements in the item passed I have no idea from whence they came.  I ran MicrosoftFixit50015.msi (a Windows package install).  Then re-checked the past again and all elements had disappeared or been corrected.  SEEMS this file or box on the PC has become corrupted.  I changed the control volume on always point display.  Also, I went to control panel and sounds and re-checked the volume icon to Place in the taskbar.   Rebooted the system and has worked for me so far.  Good luck!

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• diagram of the battery for 3000 microsoft wireless mobile mouse

  I just need a diagram of the door of the battery compartment for 3000 microsoft wireless mobile mouse. the silver metal piece is out and I need to see HOW

  to reattach it properly so it will stay when I close the lid or the door to the battery compartment.  Touch the + end of the battery to operate.

  Did you find the Mobile Mouse 3000 battery door diagram you are looking for last year?
  I have the same situation.  I don't need suggestions to inform microsoft of warranty.  This is why you and I asked for the diagrams.  If you have the diagram, or you can send me a photo of the battery door configuration, would be great.  Thank you

• You want to set the parental authorization for Xbox live.

  Original title: authorization wizzard - x box live

  I'm trying to set the parental authorization for x box live, but the permission Wizard is American and does not accept my UK address. What can I do?

  Hi LizG1,

  I recommend you contact Xbox Live support for assistance:

  http://support.Xbox.com/en-us/Xbox-Live/browse

  Hope the helps of information.

• Authorization for the BPEL (SOASuite 12 c) Web service

  I'm currently implementing WSSE security authentication and authorization for a SOA Composite, exposed as a Web service in SOA Suite12C . WSSE authentication security is successful, but seems to leave doesn't think.

  Details:

  SOA Composite = SOAComposite1 (exposed as a Web service)

  I have two valid authenticated users USER1 and USER2. Only USER1 has access to the Web service.

  WebLogic console

  Adds a user User1 to the Administrators group

  Console EM

  Created a DBMS (Test USER) role-> wanted to add the administrator group to the Application role 'User of Test', so search for groups, but does not list in MS, so I added the 'Administrator' explicitly (Advanced section) group .i don't know if this is appropriate.

  Create an Application with (TestUser) policy as name and application added user 'Test' for her role.

  Adds approval of "oracle.wsm.security.WSFunctionPermission" with the name of the resource and the action as «*»

  SOAComposite1

  . The strategy used for authorization is "oracle/binding_permission_authorization_policy" to the level of service.

  This configuration has worked in SOA Suite 11 g, but does not work in SOA Suite 12 C.

  11 g that only USER1 is allowed access to the webservice, in a trial with User2, user2 performs authentication but fails with an exception "Is not to allow" which should

  12 c, users USER1 and USER2 is able to access the Web service. I want the request fails whenever the user is user 2.

  The only difference is in 11 g, having created groups in the weblogic console, the groups are listed in 'EM, I just need to select the group to add in the role of Application, where as in 12 C I don't see the groups created in weblogic, listed in the MS. I had to add explicitly in the Application role.

  I haven't restarted the servers (Admin /SOA serrvers) 11 g and 12 C.

  Customer - https-> SOA

  [Authentication of WSE and Authroization security]

  Please help.

  Hi there user,

  Recently, I've implemented something similar on OSB, if authentication has been with the user name token and the SSL was pure transport level, i.e. was not part of the political configuration of GOSA.

  That's what I did:

  1 created users (in embedded LDAP)

  2. created LDAP groups and made users members of them. For simplicity, I created a hasAccess group and the other - hasNoAccess and added User1 to user2 to hasNoAccess and hasAccess

  3. has created a new policy of security GOSA

  4. the newly created policy added assertion of authentication - in my username token case

  5. the newly created policy added AuthZ assertion of type binding-authorization

  6 set the AuthZ liaison-authorization assertion as follows:

  -action game *.

  -resources match *.

  -added the hasAccess groups of the embedded in the roles of article selection options "selected roles.

  7. fix new GOSA policy to your component of the service binding.

  In short you need not create application roles. You can work directly with the LDAP groups with authZ assertions.

  HTH,

  A.

• I lost my disc for item 13 for windows, but I have still my MAC drive is it possible to get a load down without having to buy it all over again?

  I lost my disc for item 13 for windows, but I have still my MAC drive is it possible to get a load down without having to buy it all over again?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• said that my serial number is not valid for items

  said that my serial number is not valid for items

  Hello

  Please see this link for more details: error of incorrect serial number

  Hope this helps!

• What table stores the published/unpublished indicator for items assigned to any section in iStore

  Hi all

  I want to know what table stores the published/unpublished indicator for items assigned to them sections to iStore?

  According to my understanding:

  When any item of inventory is assigned to any section we have given in to this inventory_item_id ibe_dsp_section_items.

  This board just have the start_date/end_date and tell me if the article is published on the site

  There is an another table ibe_dsp_msite_sct_items which shows what minisites element is available.

  This board just have the start_date/end_date and tell me if the article is published on the site

  We can always go to responsibility administrator iStore

  Merchant iStore > > catalog > > Products > > summary

  search for any item and it shows the item was attributed to what all the sections.

  Here, we have a button "change published Flag." This can be used to publish/not to publish articles on all sections.

  I want to know what table is updated when we hit this button.

  Thanks in advance!

  Thank you

  Shashank

  Hi all

  I got the answer.

  This button updates the

  MSI.web_status

  Just thought that answer here in case it helps anyone.

  Thank you

  Shashank

• I am able to set up a record generic subdomain for my business catalyst site?

  I am able to set up a record generic subdomain for my business catalyst site?

  Without this you is impossible in the DNS BC system

  Brett