dial the number of waiting

Similar Questions

• Citing the phone to dial a number

  I'm trying to dial a phone number of my app running on my BB Z10. I was able to launch the phone application and bring it to focus, but it does not dial the number. I have tried the following to dial in number 9999:

  navigator_invoke_invocation_create (& iRequest);

  navigator_invoke_invocation_set_id (iRequest, '1');

  navigator_invoke_invocation_set_action (iRequest, 'bb.action.DIAL');

  navigator_invoke_invocation_set_type (iRequest, 'application/vnd.blackberry.phone.startcall');

  "{" string data = '{\"number\': \"9999\ '} ';

  navigator_invoke_invocation_set_data (iRequest, data.c_str (), data.length ());

  navigator_invoke_invocation_send (iRequest);

  navigator_invoke_invocation_destroy (iRequest);

  I also tried sending as URI instead of the data :

  navigator_invoke_invocation_create (& iRequest);

  navigator_invoke_invocation_set_id (iRequest, '1');

  navigator_invoke_invocation_set_action (iRequest, 'bb.action.DIAL');

  navigator_invoke_invocation_set_type (iRequest, 'application/vnd.blackberry.phone.startcall');

  navigator_invoke_invocation_set_uri (iRequest, ' data : //local?number=9999 ");

  navigator_invoke_invocation_send (iRequest);

  navigator_invoke_invocation_destroy (iRequest);

  In both cases, the phone will appear but do not dial.

  You could do that.

  Phone phone;
  phone.initiateCellularCall(number);
  

  With the help of the class of phone.

  https://developer.BlackBerry.com/Cascades/reference/bb__system__phone__phone.html

• How can I get rid of a notice titled "Safari Alert" that tells me to dial a number, but forbidden access to the i - pad

  How can I get rid of a notice titled "Safari Alert" that tells me to dial a number, but forbidden access to the i - pad

  It's a pop-up trying to rip you off. Clear your Safari cache. Settings-> Safari-> erase history and data from the Web site.

• Dial a number through rings PSTN three times before moving on to compose through the line

  Dial a number through rings PSTN three times before moving on to dial by phone line.
  I would like to Setup so that when I dial a local number through the phone line, but when I dial long distance call going VoIP.
  In our city to the Canada, we make a local call using the area code. e.g. xxx-xxx-xxxx
  Long distance is preceded by a 1 e.g. 1 xxx xxx-xxxx
  The numbering plan defined in 1 line numbering Plan: is (250xxxxxxx<:@gw0>| 1xxxxxxxxxx.)

  How can I make the SPA3102 immediately start dialing the local number without the three three apparently redundant rings?

  
  

• Vista Dialer won't give any area code. give just 1 5 then the number he dialed then then the computer voice said something that you do not diled enough numvers.

  In the Dialer phone vista when I automatically dial a number it does not cross the area code. There always inters 1 5 instead of the area code. To illustrate, if I inter 503-555-4563 it will be inter 1 5 555 - 4563. I get a dial tone, and then he composed and rings and him comuter pnone says you have dialed an incorect number. What can I do to fix this?

  Hello Nelg76,

  Have you set up dialing rules Dialer?
  In the search box, type Dialer. Then go to tools, dialing properties, select modify and change the dialing area code rules.

  Let us know if that helps.

  Marilyn

• BlackBerry smartphones can not dial the phone number of the browser

  I "upgraded" to the OS 6.0.  Now my BB does not allow me to click on a phone number I see on the internet and dial.  I have to read the number, memorize, close the browser and manually push in numbers.  UGG...   It's rotten.  Any suggestions?  T-Mobile continues to tell me it is the Web page I'm on, but he is clearly not that.  OS 6.0 is quite the downgrade.  If someone can hear the ugly notifers they call ringtones?  The assistance service directs you to buy ringtones of appworld.  What a pot!  Sell a phone that you can't hear the ringtone.

  I solved the problem by getting BlackBerry.  Now, I'm fully functional on a new Android phone.  Good luck.

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• fact the # LNS increase when increasing the number of DB waiting?

  IM using 11g, LNS (Primary) communicates with RFS (Standby) to do it again, when the number of standby database increase, is the number of LNS also increase or it dynamically generates slaves or still to be alone?

  A process of LNS for each destination ensures ASYNC or SYNC. Standby #, 3 LNS. The ARK several processes on the primary contact all Standby to execute the resolution GAP.

  Processes have been renamed to 11.2 to make it a little clearer. An NSS process for each SYNCHRONOUS Eve destination and a NSA method for each ASYNCHRONOUS standby destination.

  Larry

• iPhone 5-can't dial a number with Skype credit

  I loaded and set up my iPhone from iTunes 5 and he transferred transparently all my data and applications from my iPhone 4. When I tried to dial a number on Skype credit there is no result. I was allowed to call out on my old phone on my wireless network. The new phone is also connected via wi - fi. What do I need to uninstall Skype with the new phone and then reinstall? Any suggestions?

  I fixed it. I had to disconnect, then reconnect and it should now connect.

• Try to use ePrint, get the message "Please wait HP Print complete previous jobs.

  Printer photosmart = 5510

  Conputer laptop computer = HP Pavilion

  OS = Windows 8.1

  Try to use ePrint, get the message 'Please wait while HP Print complete previous jobs' status is displayed 1 point with zero page. Green bar keeps scrolliong in the top of the window. Tried to cancel this job without success. Someone at - it ideas?    In my view, that the "previous work" was sent to ePrint before mobile computer account registration has been made.

  Hi @jhaiar ,

  I understand that you are a problem with ePrint and your Photosmart 5510. I want to help you with this.

  One option is to remove web services, and then turn it back on. Unfortunately if you have customized the ePrint address, you will never lose it. You can always create a new address, it cannot just be old.

  HP has a support group of service based for Cloud related issues. This means no warranty or support costs.

  If you do not want to remove the web services, give them a call. They might have another option.

  Please contact our Cloud Services at 855-785-2777.  If you do not live in the United States / Canada region, please click the link below to get help from your region number.  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• samples per channel and the number of samples per channel

  in my DAQ mode samples finished program, there are two screws: timing and read.vi DAQmx DAQmx.

  I have to set the parameter to "samples per channel" DAQmx timing.vi and 'number of samples per channel' on DAQmx read.vi... Is there a relationship between these two?

  My laser runs at 1 K Hz. I want to go to the wavelength, wait for a number of shooting lasers, read the data and move on to the next page...

  Thank you

  Lei

  In your case, the VI will acquire the lesser of either:

  The "samples per channel" that you have defined on the timing DAQmx VI

  -OR-

  The number of iterations of your for loop (N) times the 'number of samples per channel"that you have defined on the DAQmx read VI

  The "samples per Channel" VI DAQmx of timing for a finite acquisition dictates how many samples the DAQ hardware should acquire in it's onboard buffer before indicating that the acquisition is complete.  "The number of samples per Channel" on the read DAQmx VI dictates how many samples the DAQmx driver must return buffer on board the aircraft to your application.

  Let's say the "samples per channel" on the calendar DAQmx VI is set to 50.  Thus, the card will acquire 50 samples and place them in the edge of the buffer, then stops.  Suppose we have the 'number of samples per Channel"on the DAQmx reading VI the value 3 and what we call the VI in a loop For which runs 10 times.  Thus, every time the DAQmx lu VI is called, it will wait until there are at least 3 samples in the buffer, and then return these three.  We call the VI a total of 10 times, then we will answer 30 total samples.  Thus, the last 20 samples acquired the card remains in the buffer and are destroyed when the task is disabled.

  Now let's say that we increase the "number of samples per Channel" on our DAQmx Read VI at 10.  VI Read will wait until 10 or more samples are in the buffer, and then return these 10. Thus, we will be back all 50 samples map acquired by the 5th iteration of the loop For.  The 6th time we call him VI DAQmx Read it expires, because there will never be another 10 samples in the buffer, and the VI returns a warning.

  This clarifies things?

  The purpose of this behavior is to allow you to both set the total number of samples that the DAQ hardware will acquire and also control how much of these samples is returned whenever you call the DAQmx Read VI.

  Kind regards

• Column data reading according to the number of lines

  Hi guys,.

  I am currently stuck on the problem of recovering the data from my database (MS Access) according to the number of lines, he has at any time (without having to know how many lines there will be during the programming of this part).

  First, I show how my program works. I'm working on an automated food, order and after the customer has chosen his power, system information such as the name of the food, quantity and price of the food will be written to the MS Access database table. (for example table name "Orderingtable" in MS Access) For my case, 1 order of food will occupy 1 line of the database table. In other words, as part of the same, if he orders 3 different foods, 3 rows will be filled in my database table.

  I would then get the part number of 'Quantity' for each order of the database and summarize the amount finally to count the total number of orders in the table of database at any time. This addition of result will be then shown on the Panel before informing the customer how many orders waiting's just prior to his order. In this case, it can get out if he wants to, if the number of orders is too big for its waiting time.

  However, I do not know how many lines my 'Orderingtable' will be 'Orderingtable' because both accumulate lines and data lines until being command to remove. Therefore, I cannot predict how many lines I program the party totals the number of quantity for each line.

  Is it possible that I can get the part of the 'quantity' without having to know the number of rows in the database so that I can count the total number of pending orders just by adding up the value of the quantity for each line?

  I do not wish to "code" my program by limiting the tables of database for us are going to say, only 50 lines at any time.

  Attached below, this is how my database table "Orderingtable" looks at, which will be used to extract the 'Quantity' column so that it can count the total number of orders and be shown/shown on the front panel of my Labview program.

  I hope that you are able to help me!

  Thank you so much in advance.

  See you soon,.

  MUI

  You can also use the SUM function:

  SELECT SUM (Quantity) OF the order WHERE Queue_No = %d

  And no need of an "Order By" clause, if you add just the quantities.

• Bouba Analyzer: How to control the number of points per decade?

  Total newbie here. I can't control the number of points per decade in the Bode VI. It's always 5 points per decade.

  Don't know even how to get the Version of Elvis #, but it is at a minimum 4.1, because Elvis installer will install 4.1 (said the current version is most recent). Running Windows XP.

  How can I get Elvis to respond to my request for more points per decade?

  Mike

  Hi Mike,.

  If you are still curious about what drivers you have installed, you can view by using the Measurement & Automation Explorer (start"all programs" National Instruments"Measurement & Automation Explorer).  "Once their, go to my system" software and you'll find NI ELVISmx and its version.

  This behavior you're seeing is a known, class problem under Corrective Action Request (CAR) #373017.  For now, the number of points per decade will remain at 5.  Please wait for the next update of NOR-ELVISmx to see if this problem is fixed.

  See you soon,.

• Cannot dial another number (communication URA) after dialing a fax number.

  Hello.

  I have a HP 4500 (G510a-f alias). I need to send a fax, but before you send it, I'm supposed to call the second number to authenticate.

  When I try to do the display says he is busy. I tried to type in the number on a phone and then tried to fax feature.

  I'm completely crazy with the machine.

  You kindly advise?

  Thank you! »

  Hello

  Try to use the # key to add a break before continuing the numbering.

  For example, composition 9 #123456 will add a break after 9 to get the tone... typing # will add a pause of double length, etc.

  But the more you try dial manually by launching the dial itself first of all...

  Using the arrow keys select fax B & W, then click on the Start button.

  Confirm that the apges was analyzed according to the instructions on the screen.

  Now you should hear the fax get a dial tone, type in the number to authenticate... Once you hear the tone click target fax number...

  If any of these fail, I would say that the configuration of the name extension of fax to get an output line immediately if authentication, ay be too complex for an analog fax.

• Question about the installation of XP with an OEM disc and using the number of CoA HP

  Hello

  I have a DC5100SFF that I bought refurbished last year, and it came not with all drives. It comes with windows XP pro and has the CoA sticker with the activation code.  It also has "HP" written on it.

  I thought to wipe the hard drive and reinstall XP Pro in the near future.  I have an an OEM Windows XP Pro disc, but it is not specific to HP. The CoA sticker has been removed from the new drive (and the package is not open), but there is nothing on the packaging to indicate what OEM brand (its likely it was another popular provider).

  My question is, if I install XP from this disc, he on my machine can use the number on the certificate of authenticity to activate it, or do I need to use a specific disc HP XP Pro?

  Thank you

  Hello:

  David is correct. You don't have the product key if you use recovery discs.

  However, I believe that you can still get the recovery disc for your Business from HP desktop PC.

  Just dial 1-800-334-5144 and inform the representative of customer services that you need a set of quick restore CD.

  You will need to provide the model number and serial number.

  A game costs $10.00.

  As for your other question... If someone has already used the product key XP pro on the sticker on your PC, you can use any disk XP Pro OEM installation and enter the product key.

  I do it all the time. I used OEM Dell on HP PC disks. Never had a problem.

  Paul