NTOSKRNL.exe problem during the startup of windows xp on a dv5000i Pavilion

Similar Questions

• I have a problem with the startup in windows xp

  OK, this is how it goes end-to-end.

  My brother is still using xp and one day, as his computer just took a dump...
  It starts, runs through the bios screen, then head to the start screen. As soon as there is almost no loading, a screen very very very very rapid rises. then it restarts... Well, the error, I discovered, was the unmountable boot volume error. Although it doesn't have the recovery disk for his computer... Is there a way can I fix?

  By the way I can't boot in any mode without failure or other way. I can't even a prompt back. I tried to use ubuntu, but I'm stumped on this review that I don't use on a daily basis, is close to 100%.

  FOR any help would be greatly appreciated.

  It's a shame that forums MS Answers do not ask for any information system when a new question is asked, because it knows absolutely nothing about your system (except it does not start).

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  For this error, I would like to start here:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Problems during the upgrade of Windows 98 Service Release 2 for Windows XP Professional Service Pack 3

  Well, I have an old Dell Dimension that I wanted to use and I decided to upgrade from Win98 to WinXP Pro.

  In the process as soon as I start the upgrade process it gives me an error message"
  " Error 589FF5Ch" I checked around the Web sites and found nothing.

  If no response would be appreciated.

  E-mail * address email is removed from the privacy *.

  Thank you.

  Dear God. I can't believe how much a long time ago, I asked this question. Over 2 years later I see something in my Inbox (right now). Honestly, I know more ask this question.

  And more now, I would say try the upgrade to Windows 2000 if you happen to have a product key. Then go to Windows XP. If not, is it possible to restore Windows 98 updates? Perhaps the latest edition of Service causes a conflict with the upgrade. You be left with a clean cloth. I'm curious, that you still have a machine running Windows 98? What is the material/specs on this platform? I can't believe anyone is still out there running old technology like this to use out of it.

• MY PROBLEMS DURING THE UPGRADE TO WINDOW 10

  I received a notification to upgrade Windows 7 to 10 of the window. In may 2016, I started the process. I followed as a result dialog boxes that Windows 7 and downloaded Update window 10. Beginning of June, my PC me notified to the installation of window 10. When I clicked OK, a dialog box informed me that my PC will reboot several times.

  When he completed the first 100% and continued with another level of installation, to 32% he is static up to 3 hours when I noticed that my laptop batteries becomes excessively hot. I then turned off the batteries. When I powered up the PC again, it began to recover my Windows 7. From there he was showing me that my windows 7 is not genuine.

  Now I couldn't restart the upgrade from window 10.

  The PC is my desktop PC and I can't access the product key of window 7 for use in a revalidation. What should I do to get out of the mess.

  Not wise to interrupt an upgrade

  You even need to create a system image on a removable hard drive?

  Anyway now you will need to contact M$ using the activation of the phone and communicating with the manufacturing of the machine to sort the invalid license.

• Problems during the installation of windows on Satellite L40

  my laptop toshiba satellite L40
  model No. PSL4CL-001001
  series X7061289R

  while I have install windows xp, it says that my hard drive not found...
  for windows vista, I also facing the same problem...
  I know that I have I need of the driver for this laptop...
  but where can I found it?

  I have not the driver or the ultilities... because his second hand trade...
  can anyone giv help me?

  Thank you...

  OK, first, all drivers and utilities you need can be found here: http://eu.computers.toshiba-europe.com (Support & downloads). Choose your laptop computer and operating system.

  Windows tells you, it does not find your HARD drive because of the lack of SATA drivers. They are in the Matrix Storage Manager intel, which can be downloaded on the link above.

  How to use this forum just use search function driver, but you have two options. Put them on floppy or integrate them into your installation via the tool called nlite disc.

• Problem during the upgrade of Windows 10 via Windows Update.

  I am currently using a Genuine Windows 7 Home Basic OS.

  When I was upgrading to Windows 10 via my Windows Update, download of the updates with 99% , then he started again to 1%.  What is the problem?

  Although, I downloaded all the important and optional updates before moving on to Windows 10, then also what why? How to fix it?

  Help, please!

  Thanks in advance.

  Hey,.

  If you get 10 Windows via get windows 10 app, you always can ISO to upgrade.

  Download Windows 10 media creation tool

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)

• Unknown problem during the instalation of windows 7. __

  Recently, I bought a new motherboard (support windows vista) and decided to install windows 7 Professional, but after the first start I see only "0xc0000428 error". I tried several times to install it but still the same "0xc0000428 error". The installation can be prosecuted only if I press "f8" and choose the option "disable driver signature enforcement". When I try to turn on my computer I see error 0xc0000482. The only way to turn on my computer after the installation is by pressing "f8" and turn off driver signing and windows 7 starts up normally and I can use it. Is a way to do something with this error? It is very frustraiting and can not anywhere for help.

  If there is no signed driver and you are aware of the risks in using unsigned drivers, (accepts responsibility for any problem, it causes,) there is a setting available to settle the obligation of the strategy.

  Click Start, and then type gpedit.msc
  
  SELECT the option for code signed drivers to:

  Installation of the Templ./System/Driver Config/Admin user

  then set the drop-down list to "Ignore"

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Facing problems during the installation of windows 7 201 err0r

  I'm trying to install the trial of lightroom and facing problems 201 error

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

• Blue screen during the installation of windows 7

  Hi guys, this is my first question. I have a problem during the installation of windows. A blue screen saying is displayed "STOP: c000021a {fatal system error}.

  The initial session process or the process of the finished system unexpectedly with a status of 0 x 00000000 (0 xC0000001 0x001003f0).

  The system stopped"I can't do anything else than the computer shutdown. Please help me

  Could you provide your system specifications?

  Are the upgrade from a previous version of Windows or to do a clean installation?

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• When you save the playlist, error - "Windows Media Player has encountered a problem during the creation or recording of the reading list.".

  When I try to save a playlist, I get an error message "Windows Media Player has encountered a problem during the creation or recording of the reading list.".

  Hello

  • Will there be any changes made prior to this issue?
  • What version of Windows are you using?

  Step 1: I recommend to run the Windows Media Player settings Troubleshooter and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Step 2: If the problem is to uninstall and reinstall Windows Media Player. Here's how.

  Uninstalling and reinstalling Windows Media Player:

  (A) uninstall Windows Media Player:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find multimedia and uncheck the brand in the face of Windows Media Player.

  d. restart the computer

  (B) reinstall Windows Media Player:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the multimedia functions and place a check mark in front of the Windows Media Player.

  d. restart the computer.

  For more information, see the article below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  Outlook has been changed from hotmail, my emails say don't link with windows media player, outlook is not their problem, but it happened only when they merged account

  I have to be able to open MP3 files that ae sent emails in my work, it's urgent, please I need to know what settings to correct to sort this please

  It comes to getting the error message

  There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  E-mail address is removed from the privacy *.

  Hello

  Method 1:

  See the article and check if that helps:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Method 2:

  I suggest also refer to the thread with a similar problem and a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-when-trying-to-play-media-files-Windows/4abe7be7-b3fe-44eb-b4da-e0848c3c8bd4

  It will be useful.

• I can't sync Windows Media Player with my MP3 player, it says "Player Windows Media has encountered a problem during the synchronization of the file to the device".

  Original title: windows media player

  Whenever I try to download songs on my mps I do not sync my songs. Whenever I click on the button of synk sart on Windows Media Player little pop box saying "Windows Media Player has encountered a problem during the synchronization of the file to the device. For additional assistance, click Web Help. "and when I click web help it does not at all help me please someone help me!

  Hello
   
  1. with the device that you are trying to synchronize?
  2 - is the first time you try to sync Windows media player?
   
  Windows Media Player has encountered a problem during the synchronization of the file to the portable device. Because this error can occur for various reasons, there is no single solution.
  To resolve the problem, try to disconnect and reset. See your device manual for specific instructions on performing this procedure.
   
  In some cases, this error may occur if you try to synchronize a file hidden on a device. To resolve this problem, delete the file in the sync list or change the properties of the file so that the file is not hidden.
   
  For more information, see the article below,
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179

• Problems with the installation of Windows 7 Home Premium: ask load the driver during installation

  I am currently using Windows XP Professional Version 2002 SP3 with specification of my computer as below:

  Intel Pentium D 3.40 GHz 3.39 GHz

  3.5 GB RAM

  I tried to upgrade to Windows 7 by restarting my computer and boot from the CD. Setup goes as usual, initially, he asked for the language installation during installation, and after I clicked OK, the window titled "Load driver" had appeared with his message as below;

  "To install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK."

  What are the problems really? Because I think I have all the necessary drivers and before that everything works fine. Where can I get the drivers? And how to solve this?

  Help, please. Thank you. :)

  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• What to do if cmd.exe will appear during the installation of windows 7?

  What to do if cmd.exe will appear during the installation of windows 7?

  I have my original installation disk to windows.
  After "Press any key", cmd.exe will appear and I don't know what to do.
  What should I type here?
  I tried also to advanced recovery method, but it can not read my drive...
  He said: "no installation disc valid." I tried to put it back, but it just doesn't work.
  What should I do?
  Thanks for your help :)
  
  Original title: Reinstalling windows 7

  At the Cmd box type: exit

  then press the enter"" key.

  J W Stuart: http://www.pagestart.com

• I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  63f5a1a9-ECA2-4300-B10f-22cd940a8726 wrote:

  I have a problem during the installation of Oracle Database 11 g Release 2 (11.2.0.1.0) on my 32-bit windows, I get this message: file not found C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\em.ear. It is one of many files that I should I cancel or continue? I pressed on continue in the past and I could not open properly Oracle. Sql Please HELP!

  It is a symptom of textbooks classic does not have read and followed the original instructions to prepare the downloaded files.  You should have two files zip files.  They both must be decompressed in the same directory.  If you unzip using Windows graphic interface - in right click on the name of the file and selecting "extract all...". "the default behavior will be to create a directory, the same name as the zip file and extract in it.  Thus, file_1_of_2 pulls in directory_1_of_2 and file_2_of_2 extracted in directory_2_of_2.  You must override this stupid behavior by default and specify the directory yourself.  And specify the SAME directory for both files.

  Or just go to a command prompt, change directories to the directory where the two zip files are located and deliver "unzip " and "unzip ", and they will both be properly unpack to a directory named "database".