Dictation & speech; Impossible to find in system preferences?

Similar Questions

• Impossible to find Siri on Preferences system on MacBook Air after update to El Capitan

  I upgraded my MacBook Air to OS X El Capitan 10.11.6 but should not be allowed to Siri during Assembly and can not find the option in system preferences. Any ideas?

  That's right, because it is not an option in El Capitan.

  https://www.Apple.com/MacOS/Sierra/

• Does not open the system preferences of the Apple menu

  Anyone know of a good solution for this?

  A few weeks ago I started noticing that I couldn't open my application system preferences in the Apple Menu bar (via the Apple logo > system, or via the WiFi icon Preferences > network, or even Preferences by right-clicking on the desktop to change the desktop background, etc.).

  WHAT WORKS:

  I can open the system preferences if I click directly on the application icon or you try to open it from the dock.

  I can open the app in the Apple menu if I register as another user.

  WHAT DOES NOT WORK:

  The problem does not go away when I restart in mode 'start '.

  The problem does not go away when I run disk utility.

  The problem does not go away when I remove the "Finder" and "System Preferences".plist file in the Preferences folder in the user's library.

  The problem does not go away when I remove the files "Preferences panel" bury of the Cache in the user's library folder.

  The problem does not go away when I zap the PRAM.

  The problem does not go far if I replace the system preferences application from a recent backup.

  I was about to just try and re-install the MacOS, but thought I would try the forums first, since the Apple Support site said that it should not be necessary if the problem is only limited to a user's profile. I found a lot of entries in the forums for this issue dated a few years ago and have tried most of the solutions, but I don't think that you can repair the permissions of the disc more on El Capitan.

  Anyone have any ideas? Thank you.

  Given all of the things you tried that don't work, over time it would take to troubleshoot more, you could restore OS X in 45 minutes to an hour on a broadband connection using OS X Recovery.

  Start your Mac while pressing the command + R keys. From there, you should be able to access the built in utility to verify and repair the disk from startup (if necessary) and OS X using OS X recoveryof restoration.

• Mac os Sierra, Dictation and speech pain missing from system preferences

  Hi, it's Stephen. I've upgraded to mac os Sierra, and now, for some reason, Dictation and speech is missing in system preferences. It is preferably pain that I use to activate enhanced dictation, which is a feature that allows the use of dictation, even in offline mode. I reported the problem/bug to apple and I called him support Apple Care technical on this subject yesterday. Can someone tell me why Apple took dictation and the word of the preferences system Mac os Sierra? Or was it just an accident? Any help would be greatly appreciated. Thanks in advance

  It was not withdrawn. There is a tab in the keyboard preferences. And there is more in the accessibility preferences.

• Impossible to uninstall 'Corel Painter internal Audio Driver' system preferences?

  Hello

  I've looked everywhere in my iMac to remove this diver who appears in my sound system preferences, after demonstrations Corel Painter.

  Can someone tell me how to do what I have searched & deleted all Corel named files but not the driver?

  Thank you

  I just found it:

  System/library/extensions

• System preferences not docking station opens

  Since that system preferences download Sierra won't open the top left icon Apple.  It doesn't work anymore since the dock on my iMac 2010.  Any suggestions?

  Hello

  May be corrupt Dock preferences.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Then copy and paste the following text:

  ~/Library/preferences/com. Apple.Dock.plist

  Click OK, and then place the file com.apple.dock.plist in the trash.

  Restart your Mac, then try to open the system preferences of the dock.

• not able to put auto unlock option is not available in system preferences

  Update the end of 2015 to macOs Sierra iMac.

  Updated the Apple Watch at WatchOs3

  Removed the two steps of authentication and improved to two-factor authentication.

  Tried to set up the Auto Unlock in preferences/security system & Privacy panel.

  However, the "Allow your Apple Watch to unlock your Mac" option does not appear in the Panel.

  What other hoops should I go through to get this feature going? Thanks in advance for the help...

  The prices your Apple Watch the Mac on the same network Wi - Fi?  Sometimes the shows may use another network - its s trying to find a network, if the iPhone is not available.

  Is your set watch in place with an access code?

  Once you have changed your two-factor authentication, you disconnect from iCloud and vice versa, on the matched iPhone and Mac?

  See the specs here: automatically unlock your Mac with your Apple Watch

  Use Auto unlock with any Mac and Apple Watch that satisfies the requirements of continuity system:

  • Apple Watch (1st generation), Apple Watch series 1 or series 2 Apple Watch using iOS 10
  • Mid-2013, or more recent Mac using macOS Sierra

  Make sure that your devices are configured as follows:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your identifier Apple is using two-factor authentication.
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID.
    On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password.
    On your iPhone, open the Apple Watch app, then type the access code.
  • Your Mac has "allow your Apple Watch unlock your Mac" selected in Security & Privacy preferences.

• Problems of system preferences

  I had this problem for some time. I tried all of the solutions that I can find online, without success. However, I noticed today that when I have open Preferences (Apple menu) system, it says 'Network' at the top rather than 'System Preferences '. It just freezes and finally gives the rotation color wheel, and I am obliged to Com/Opt/Esc out of it.

  Here are the recent logs:

  23/06/16 6:29:07.430 PM com.apple.preference.network.remoteservice [592]: objc [592]: class ANPTopLevelService is implemented in /System/Library/PreferencePanes/Network.prefPane/Contents/XPCServices/com.apple.preference.network.remoteservice.xpc/Contents/MacOS/com.apple.preference.networ k.remoteservice and System/Library/PreferencePanes/Network.prefPane/Contents/MacOS/Network. One of the two will be used. That one is not defined.

  
  23/06/16 6:29:07.461 PM com.apple.preference.network.remoteservice [592]: unable to connect (o_advancedMenu) out of (ANPNetworkController) (NSMenu): missing setter or instance variable

  And the screenshot:

  

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• System preferences will not be locked OS 10.7.5

  The Energy saver system preference is not locked. I have to reset each time I start up

  Quit System preferences

  In Finder, go to the "Go" menu and enter ~/Library/Preferences

  Delete these files/folders:

  /Preferences/com.apple.systempreferences .plist

  com.Apple.SystemPreferences.xxx.plist all of them if more than one.

  Then, restart or log off and insert it again.

• Apparently corrupt system preferences

  MBP of 2009, running El Capitan, with 512 GB of memory, no where near not maxed out.

  Last month, in spite of having nothing, added when I run my Carbonite backup - which I use since I got the computer, Carbonite, then System Preferences freeze freezes and crashes. I spent hours that both support online and on the phone with Carbonite, which was amazing. After hours of working with them, it is determined that it is preferences system that appears damaged. We've repeatedly uninstalled and reinstalled Carbonite. System preferences always freezes.

  I lost all my disks in the system, etc. in a forest fire last year. Is there a way to uninstall the system preferences and if so, how do I get it back? I really don't want to have to replace the computer right now, but if it is a symptom of a crash total imminenot, I'll do it.

  Help!

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Why open system preferences for the additional hours of bad screen

  Why the preferences system not open to the main screen. When I click on it and open the system preferences, it goes directly to the security and privacy, every time. It still works perfectly well. I can always click on the upper left button to return to the main screen. It is really annoying that he began to do this.

  I started doing after that I had to change some of the parameters for sharing so that I can get remote access to the work of this Macbook Air to my iMac at home when they are on separate networks.

  Im not sure what triggered the system preferences to do this, but the only reason why I ever went to this screen was to check some settings of the firewall. I don't change not even nothing in there, nor I have stayed there when I closed the system preferences. Nevertheless, I know has this annoying problem.

  < image edited by host to remove the serial number >

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Preferences/com.apple.systempreferences.plist

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Quit the application runs. Move selected item to the office, leaving the window open. Restart the application and test. If there is no change, leave again and place the item you back where he was, crushing the that may have been created in its place. If not, remove the item you moved.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Why my system preferences does not open?

  

  Hey guys! I posted my system specs before you start.

  Anywho, after a fresh clean install of OSX El Capitan (because my iMac crashed recently and I had to wipe my hard drive completely... Yes, there was a lot of tears), like, literally yesterday, I can't open my system preferences. As I click on the sign of the Apple at the top left, then go to System Preferences...

  This is what happens...

  The small system preferences icon bounces just bounces... bounce... and then... nothing... to frikkin' ever. I have to force it to quit. I try again and again, same thing. So, I go in Applications run in 32-bit mode, try again and guess what? Celestial tracks. No problem... UNTIL I try to choose an option, any option, and he ALWAYS tells me it need to restart System preferences to open whatever it is, then proceeds to give me spinwheel thing... and then crashes and I have to force quit... again.

  So, I suppose, in 64-bit and 32-bit, it does not work properly. And Yes, for the love of God, I already tried the delete your whole com.apple.systempreferences.plist, but also the other things that other forums will tell you to remove in system preferences.

  Note: another issue, I felt at the same time, it's that for the life of me I can't Time Machine to notice my external hard drive. I tried updating all the disks on my external hard drive, repair permissions, first aid, USB 3.0 update, power cycling, rebooting with alt + cmmnd + P + R, single-user mode, fcsk, safe mode, most first aid,... like, what the hell is happening? Laughing out loud

  -

  Drew

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• El Capitan system preferences grayed out

  Hi, I had a MacBook Air (11 inch, early 2014) Version OS X El Capitan 10.11.2. About a month or two before, my friend run pranked me and put a profile on my computer (the profiles that are in system preferences) and it grayed out some of my preference (Extensions, network, share, and profiles). I tried to remove him, but he repeated to me that he does not know how. I tried to do the thing when you hit NSPrefPaneGroups.xml, but because I'm under El Capitan, I am not able to delete this file because it's a file system or something else. Is there a way to solve this? Help, please!

  Because the computer has been manipulated by a person with unknown intentions, the only course of action is to delete the internal drive, reinstall OS X and only restore your documents from a backup. You then need to install any other software support original or fresh downloads. That's what I recommend.

  If you just want to remove the malicious profile and take your chances that nothing else has been done, see below.

  Back up all data before proceeding.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please triple - click anywhere in the line below on this page to select:

  sudo profile -d

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

• How to set recent items in system preferences and have it stay with my setting

  Noticed that to happen just in the last few weeks.

  Use Pages and try to use Open > recent and all I was getting was clear Menu.

  Went into System Preferences > general and recent items is set to None.  I changed it to what should be the default value of 10, but he keeps changing to None.

  For the life of me, I can't understand how to do so that he can stay 10 or any other parameter as it keeps going back to zero.

  Appreciate the help of CIHI people!  Computer info below.

  

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• L2TP - impossible to find a group valid tunnel

  Hello

  I'm sure this is a simple solution, but I don't see what I'm missing.

  Any help please?

  Get the following errors in debugging.

  [IKEv1]: invalid tunnel, leaving group = 95.83.254.91, IP = 95.x.x.x, impossible to find a group...!
  23 September 14:26:05 [IKEv1]: IP = 95.x.x.x, invalid header, lack of payload SA! (next payload = 4)

  Group of tunnel I want to use is Remote-L2TP

  Attached config.

  ASA Version 8.2 (5)
  !
  ciscoasa hostname
  domain xxxxx.local
  activate 8Ry2YjIyt7RRXU24 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  name 192.168.1.40 description CCTV system CCTV_System
  name x.x.x.x outside outside interface description
  description of the SERVER name server 192.168.1.1
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  switchport access vlan 12
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.1.222 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address outside 255.255.255.252
  !
  passive FTP mode
  clock timezone GMT/IST 0
  summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  Server name 89.191.34.249
  domain xxxxx.local
  object-group service CCTV tcp
  port-object eq 9010
  object-group service CCTV_NEW tcp - udp
  port-object eq 9091
  object-group service BlackBerry tcp - udp
  port-object eq 3101
  object-group service NSM tcp - udp
  port-object eq 886
  object-group service RDP tcp - udp
  EQ port 3389 object
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  outside_access_in list extended access allowed object-group TCPUDP any host outside eq 9091
  outside_access_in list extended access allowed object-group TCPUDP any host outside eq 886
  outside_access_in list extended access allowed object-group TCPUDP any host outside eq 3101
  outside_access_in list extended access permit tcp any host outside eq https
  outside_access_in list extended access permit tcp any interface outside eq pptp
  outside_access_in list extended access allowed esp any external interface
  outside_access_in list extended access permit udp any interface outside isakmp eq
  outside_access_in list extended access permit udp any interface outside eq 4500
  outside_access_in list extended access permit udp any interface outside eq 1701
  standard access list for distance-VPN-Gp_splitTunnelAcl permit 192.168.1.0 255.255.255.0
  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.25.0 255.255.255.192
  RemoteVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  VPN-GP_splitTunnelAcl-list of allowed access standard 192.168.1.0 255.255.255.0
  standard L2TP_splitTunnelAcl-Remote Access-list allowed 192.168.1.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  mask of local pool Remote-DHCP-POOL 192.168.25.10 - 192.168.25.50 IP 255.255.255.0
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  public static 9091 9091 CCTV_System netmask 255.255.255.255 interface tcp (indoor, outdoor)
  public static 886 886 SERVER netmask 255.255.255.255 interface tcp (indoor, outdoor)
  public static 3101 3101 SERVER netmask 255.255.255.255 interface tcp (indoor, outdoor)
  public static tcp (indoor, outdoor) interface https SERVER https netmask 255.255.255.255
  public static tcp (indoor, outdoor) pptp pptp netmask 255.255.255.255 SERVER interface
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 89.191.53.17 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication http LOCAL console
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac trans
  Crypto ipsec transform-set trans transport mode
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  Crypto-map Dynamics dyno 20 transform-set trans
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  card crypto 20-isakmp ipsec vpn Dynamics dyno
  vpn outside crypto map interface
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
  308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
  010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
  30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
  13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
  0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
  20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
  65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
  65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
  30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
  30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
  496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
  74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
  68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
  302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
  63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
  010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
  a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
  9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
  7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
  15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
  1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
  18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
  4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
  81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
  082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
  7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
  ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
  45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
  2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
  1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
  03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
  69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
  02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
  6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
  c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
  69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
  1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
  445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
  1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
  2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
  4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
  b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
  99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
  481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
  b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
  5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
  6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
  6c2527b9 deb78458 c61f381e a4c4cb66
  quit smoking
  string encryption ca ASDM_TrustPoint0 certificates
  certificate 5eb57b56
  3082016a 30820201 a0030201 0202045e b57b5630 0d06092a 864886f7 0d 010105
  3111300f 05003045 06035504 03130863 6973636f 61736131 30302e06 092 has 8648
  09021621 63697363 6f617361 2e627574 6 c 657274 6563686e 6f6c6f67 86f70d01
  6965732e 6c6f6361 6c301e17 313630 39313931 33303732 395a170d 32363039 0d
  a 31373133 30373239 5 304531 11300f06 03550403 13086369 73636f61 73613130
  2a 864886 f70d0109 6973636f 02162163 6173612e 6275746c 65727465 302e0609
  63686e6f 6c6f6769 65732e6c 6f63616c 30819f30 0d06092a 864886f7 0d 010101
  8 D 003081 89028181 05000381 008e76a6 2ad8e079 15814471 df2c3309 abdc0ae7
  1c665f5f bb09154b 1ac3fd81 930b29cb 6da29338 738c 9373 a0b30f61 a1d08aa9
  f5ef926b 11ef1e22 e8beeb5f c6606090 7a71b367 cad571c5 56331678 d83d4bb4
  9f98a565 577cccd6 dc20e190 c7128cf2 e38d3ad1 37807440 3da501c2 14bbbe02
  45abf677 89248633 d 05589d 4886f70d 01010505 55 75020301 0001300 06092a 86
  000a7b9d 00038181 3e29b1d9 8459309b 5e24606a cae0710e b9e264f4 a61125b9
  2f431f3a 5c4a9485 fe9bc0b0 9f9f7072 13abd978 243e0542 e34642d6 ae33028d
  be03b9e9 56c693ab b082932d b44ab014 9366c0d4 529a7ff5 818f7293 2026521b
  52fcf5c7 d623f7fa 54019c 86 e64a4212 08444c 58 8ccd11d8 4297d18a c4b2de33
  2003eaf5 e2
  quit smoking
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 192.168.1.0 255.255.255.0 inside
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 30
  SSH version 2
  Console timeout 0
  dhcpd outside auto_config
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
  NTP 79.125.112.210 Server
  NTP server 193.1.193.157 prefer external source
  WebVPN
  port 8443
  allow outside
  DTLS port 8443
  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
  SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
  Picture disk0:/sslclient-win-1.1.4.176.pkg 3 SVC
  enable SVC
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  WebVPN
  SVC request enable
  internal RemoteVPN group strategy
  attributes of Group Policy RemoteVPN
  value of server DNS 192.168.1.1 192.168.1.2
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RemoteVPN_splitTunnelAcl
  XXXX.local value by default-field
  internal strategy group at distance-VPN-GP
  remote control-VPN-GP group policy attributes
  value of 192.168.1.1 DNS server
  Protocol-tunnel-VPN IPSec
  XXXXX.local value by default-field
  internal strategy group to distance-L2TP
  L2TP remote group policy attributes
  value of server DNS 192.168.1.1 192.168.1.2
  VPN-tunnel-Protocol webvpn
  username privilege 15 encrypted v5FJjvsPy8PsIOtZ xxxxpassword
  attributes of username xxxx
  VPN-group-policy RemoteVPN
  xxxxx YeC9t79Bj2E5FxxV username encrypted password
  attributes of username xxxxx
  Strategy-Group-VPN Remote - L2TP
  2KXeP2Ggcoa6BTsozucgAA password xxxxx user name is nt encrypted
  remote access of type tunnel-group to distance-VPN-GP
  distance-VPN-GP-global attributes tunnel-group
  Remote control-DHCP-POOL-pool of addresses
  Group Policy - by default-remote control-VPN-GP
  tunnel-group GP-remote control-VPN ipsec-attributes
  pre-shared key *.
  type tunnel-group Remote-L2TP remote access
  attributes global-tunnel-group Remote-L2TP
  Remote control-DHCP-POOL-pool of addresses
  Group Policy - by default-remote-L2TP
  tunnel-group Remote-L2TP ipsec-attributes
  pre-shared key *.
  tunnel-group Remote-L2TP ppp-attributes
  ms-chap-v2 authentication
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the pptp
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  Cryptochecksum:c4b7c39420a91e2f7bb4adc5e5a8539b
  : end
  ciscoasa (config) #.

  Hello

  I see same Phase 2 is completed in the newspapers, so more than a customer issue.

  On the Security tab in the connection on the client profile, check if you have allowed the correct password and security protocols:

  https://www.SoftEther.org/4-docs/2-HOWTO/9.L2TPIPsec_Setup_Guide_for_Sof...

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.