Difference between points

Similar Questions

• order for the calculation of the difference between the points of channel

  Hello guys,.

  Could you tell me if there is a command (or something) to calculate the diference between points of canal, and when there is a diference between points higher then a certain value, give you where are these points.

  I have some data in CSV, a force for time and travel, and I want to put on a chart the exact value when I have a decrease of strength greater than 0, 1N.

  Thanks again for your time.

  Hello again,

  I ask about the order of ChnDeltaCalc and I combine with ChnFind and ChD commands and everything is OK.

  Good day.

• Hi, I can not find the cuda switch in my PowerMac dual g4 in the opposite direction, what is the difference between reset pram by touch or cuda?

  Hello

  I can't find the switch cuda in my PowerMac g4 dual mirrored, 1.00

  What is the difference between reset pram by touch or cuda?

  Switching on the open Mac I can see a small red light and I listen to the classic sound

  but nothing on the monitor.

  FireWire connection with my mac Mini, I can view and save the hd PowerMac

  The battery was completed in December 2012 (it's weird, cause I bought the double

  years before and never changed)

  Thanks for your attention and sorry for my English...

  First of all, I have to warn. G4 MDD don't have a CUDA button and old Macs - it has a PMU reset button. The difference is that, for a computer with the PMU system like yours, you give the key ONLY a short thrust, not longer than a second.

  If treat you it as if it was a CUDA button and hold for 20 seconds, you will seriously damage your computer. That said, this image shows the location of the PMU reset in a G4 MDD:

  

  What is the difference between reset pram by keyboard or cuda?

  Since your G4 has no CUDA reset ability, this becomes a moot point. In the old Mac (G3 Beige and more - the "Old world ROM" Macs) reset PRAM via the keyboard is not completely zero everything; the CUDA reset did.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Portege R600 - difference between the cooling options

  I have a Portege R600 with Windows 7 installed, but I guess my request is generic for all Porteges regardless of the version of Windows.

  Could someone please explain to me what really mean "options of cooling" in the power settings? I could not find the details of anywhere.

  Optimized battery means that the cpu fan is activated only beyond a certain temperature? And what is the difference between cooling and maximum performance?

  Is there another way to set the speed of the cpu fan directly?

  It is a very important point for me, because the fan of the Portege is terrible, too noisy, insofar as I plan to return the laptop unless I find a solution. Sometimes, this looks like a Ferrari to RPM 1 billion engine!

  Thank you!

  Hello

  I think the explanation is quite simple: optimized cooling battery means that the fan is activated only on a temperature higher than the maximum performance mode and that s all I think.

  For example, if I put the battery optimized cooling notebook is a little hotter than the maximum performance mode, but if I can save energy. ;)

  In addition it s advisable to clean the laptop from time to time using a jet of compressed air!

• Not sure about the difference between Lenovo series

  Hey guys, I intend to buy a laptop for daily use soon and many portable computers cought Lenovo my eye (especially for their full ips hd and touch screen), but

  There's something that confuses me on their brand image, what is the difference between:

  Yoga 500

  Flex 3

  Yoga 3

  I could find good in each of them a similar version, otherwise identical specifications, why they cost so differently and what is

  the real difference between them?

  Thank you!

  I checked these two models, and I think it will now come down to personal preference.

  I got the JBL speakers and Dolby ones certified. Two speakers sound great, but I would go with the Dolby option.

  So here's the points in favor of Y500-

  (1) speakers Dolby

  2) more USB ports

  (3) HDMI port (it is a full port and no microphone, I prefer complete ports)

  (4) more large HDD (1 TB + 8 GB SSHD, fast enough)

  (5) it's cheaper

  Points in favor of Yoga 3-

  1) less weight

  (2) small charger (still less weight)

  (3) 256 GB SSD (faster)

  I think that at the end of the day, Yoga 3 will be a little easier to transport (if you travel a lot), and 500 Yoga will be heavier. My personal vote will increase to 500 of Yoga.

  You should probably look at detailed descriptions to see the dissipation of heat and other factors.

  Also, I hope that you are not buying these to make some plays heavy, these laptops are not for good game. They will work some games decently, but nothing too serious. In addition, more the laptop, the more heat it will generate.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• difference between the real time module and module fpga

  Hi experts,

  I was wondering if someone could tell me the difference between the FPGA and the module in real time (in short).

  My understanding is that the FPGA module facilitates code LV that can then be designed for the specific advice of RIO, I have used this a bit in the past.

  The real time module, I'm a little more unsure about, all I know is that it allows the creation of a 'real time' i.e. deterministic environment.

  My request is this: I wish I had several control loops running on two tables of RIO, with the host PC mainly used for recording data and user interface. I see that I have no need of RT on the host (Win XP should be good).

  Do I need the RT module?

  You are right.  In the scenario you describe, you won't need to LabVIEW RT. LabVIEW RT is used to create a deterministic execution on specific targets for intel such as the PXI-8106 and PXI-8108.  You can still use strings and floating point on RT.

• What is the difference between the NEX-5 and NEX 5R

  I would like to know what is the difference between 5R NEX5 and NEX to help me choose the best.

  Thank you

  Here are some key differences between the NEX-5 and NEX - 5R.

  NEX-5

  • Sensor CMOS APS - C with a resolution of 14.2 million pixels
  
  
  • video recording Full HD 1080/60i
  
  
  • the speed of 7 frames per second in burst mode
  
  
  • ISO sensitivity up to 12800
  
  
  • Sweep Panorama and 3D Sweep Panorama modes
  
  
  • Autofocus contrast with 25 points

  NEX5-R

  • Sensor CMOS APS - C with a 16.1 megapixel resolution
  
  
  • video recording Full HD 1080/60 p
  
  
  • the speed of 10 frames per second in burst mode
  
  
  • ISO sensitivity of up to 25600
  
  
  • Panoramic scan mode
  
  
  • Quick autofocus hybrid with contrast of 25 points of 99 points phase detection autofocus and auto focus

  In addition, the NEX5R has built-in Wi - Fi that allows you to install applications and extend the functionality of the camera. Built-in Wi - Fi will also allow you to transfer images wireless to a smartphone, Tablet, the computer and the TV.

  If this post answered your question, please mark "accept as a Solution.

• What is the difference between a G and N Router?

  original title: wireless routers

  My husband likes to play games online. We have a router belkin g. When I'm on my computer it has trouble playing games on his computer. (It slows down his game) What is the difference between a G & N Router and could you recommmend? Need help as soon as POSSIBLE.

  The difference in speed of router probably wouldn't do too much difference. You are only as fast as your slowest point, which is probably your internet connection itself. You could always talk to your ISP to knock your bandwidth so that there would be less impact. Sure, hit the bandwidth will probably bring a surcharge.

  I hope this helps.

• Difference between concentric rake / concentric Edge?

  Ladies and gentlemen,

  I would just ask you (before I go play myself):

  What is the difference between IMAQ concentric rake 3 vs IMAQ find concentric Edge and IMAQ spoke 3 vs IMAQ find a circular edge

  (except that the new function supported several types of images)?

  I mean these functions:

  

  They seem similar (and assimilated by the features). The 'new' functions are better from the point of view of quality?

  Thank you in advance,

  Andrey.

  Here is my understanding, but I could be wrong:

  Talk and just rake will find edges along the paths specified.  The edges are the end result.

  In the two routines (concentric, circular) edge, the edges are processed to find a circle or a straight line (concentric).  These results are returned and a list of the edges.  Chances are, if you open them, you will find the features speak and rake in their breast.

  All these functions have been around for a while.

  Bruce

• Difference between two data aquistion

  Hello

  I got a data aquistion system that is supposed to keep data acquisition selection until the difference between two points a lot. For example, I get voltage (mv) as 2.31, 2.32, 2.34. 2.33 2.32, 2.33 2.32. the data up to a point, say 0.1V higher or lower than the first. Thewhole procss stop. Thank you for your suggestions.

  Try this... (Labview 8.2)

• the difference between the w700-6407 and w700-6499 models?

  Please, I wanted to buy a Tablet w700?

  I wanted the best model of w700 with i5 and 128 GB, what is the number?

  in front of me w700-6407 both w700-6499?

  W700-6407 is on the website Canadian and said the same features, although there are some differences that I read as 8 hour battery.

  W700-6499 is the United States website says up to 9 hours battery, I don't know if it's true? should not be the same battery?

  I wonder if there other differences between them, the two tablets are at hand that I don't know what to buy? which is newer? I read that some models of ssd are faster than others?

  Please advise, and if there is no sheet that compares all models, since you produce too many models!

  Thank you

  The 3337u is the newer ' slightly ' 3317u and 100 mhz faster. The world real differece is negligible, as I had two versions W700. I think the turning point between if the price is equal would be watching the accesorries. 3317u model I had came with a leather case with a separate keyboard, while the version of 3337u came with a case of keyboard instead of the other case a keyboard, at least for the American package.

• Difference between models of portable 15-n096ea (F4T57EA) and 15-n096sa (F4T58EA)

  I just bought a laptop from Curry-PCWorld in the United Kingdom.

  The front desk says it's the model 15-n096ea (F4T57EA), but the box says 15-n096sa (F4T58EA).

  I found the two items listed separately on the HP Web sites and reading the specifications for the two, but I see still no difference between the 2 models.

  It's maybe just missing me something, but I would appreciate if someone can point out the difference.

  Hello

  Basically, they are the same, ea for a country / a region and its is for another country/region.

  Kind regards.

• What is the difference between the stop and restart?

  What is the difference between the stop and restart?  I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor.  I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system.  Thank you in advance.

  Hello Jeremy_1976,

  Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.

  Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.

  A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com