Different results from the the DLL source code

Similar Questions

• Why can I get two different results from the same coefficients?

  I get two different results of the evaluation of the polynomial function.

  For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result when I evaluate 49940.

  For the second, I create constant array of values that have been returned by the polynomial Fit function (I typed in).  However, I get an incorrect result of - 120.7913 when I feed the constant table the function Eval Poly when I evauate 49940.

  How this can happen when I use the same values in table?

  A picture of what I explained is attached.

  Hi Altran,

  are you sure about using the 'same '?

  You compare them? Do you have (at least) set them to 17 digits display properties?

  Please attach a VI instead of an image...

• Different results from the same calculations between SQL and PL/SQL

  This SQL statement:

  select 1074 * (4 / 48) from dual;

  Gives the 89.5 result.
  However this PL/SQL block

  declare
      tmp     NUMBER;
  begin
      SELECT 1074 * (4 / 48) into tmp from dual;
      dbms_output.put_line('Result '||tmp);
  end;

  Gives a different result:
  Result 89.49999999999999999999999999999999999996
  
  If I change and give my variable tmp, a precision and scale, (38.36) say the result is 89.5.
  
  Ed. I did about 10g (10.2.0.4.0) and 11g (11.1.0.7.0) with the same result in both.
  
  Published by: kendenny on July 9, 2010 10:19 for more information

  What is your current value of NUMLARGEUR in SQL * more (I assume that you use as your tool)?

  SQL> set numwidth 50
  SQL> select 1074 * (4 / 48) from dual;
  
                                         1074*(4/48)
  --------------------------------------------------
           89.49999999999999999999999999999999999996
  

• Different results from the "auto levels" in LR and PS

  I use LR + PS CC 2015 (latest versions).

  When you change the same photo into LR and PS (open in LR) and do a "leveling car" ("automatic Tonwertkorrektur") LR into PS Camera Raw Filter exposure settings, contrast, lighting,... are almost all different. And: the Visual result is more beautiful in PS - but I want to make fundamental changes in LR due to bulk editing capabilities.

  My question now is: why is it different? What is should not be the same algorithms in LR and PS because they both use ACR in the background?

  Or make me a different configuration for LR and PS?

  I'm stuck...

  MGo wrote:

  Strange, that is what it looks like to me the PS ACR:

  

  I don't have the camera profile selection box - as I have in LR...

  Yes, you are missing the "Camera profile" selector (Kameraprofil). I never saw that happen with the English language setting. You open a camera raw file? Only camera raw and converted DNG camera raw files will have camera profile selections. All other file formats will only show "Embedded" (Eingebettet). Perhaps with the language German selection it does not at all appear with formats JPEG, TIFF, etc. file formats?

  I suggest you post this question in the forum Photoshop here: General Photoshop Discussion

  

• Can someone explain why these two paintings 'look' different even if they are from the same source?

  Hi all!

  I'm just curious, why these two tables are different and are they really different in terms of structure, even if they are from the same source? The left is the exit of tdms get properties and the other is a power of arry auto indexed.

  Nilesh-

  No doubt, you are referring to the visual aspect, since the data are the same. One of them uses a different type of indicator of the chain. You probably click right and choose 'create-> Indicator '. When you perform this LabVIEW will use the same style of indicator as what sub-VI/uses. In case you made directly from the PDM function, but the other was created between the autoindex loop tunnel for, in the second he used everything that was default in your preferences.

• Application crashes if the same source code for both applications but the names is different

  Hello

  I have an application on said device "OldApplication", and it works fine. I've done some chnages in the same source code and also changed the name of the application to different say "NewApplication". Now both applications are present on the device. "OldApplication" works fine but when I try to open ' NewApplication "it hangs on the splash screen. I checked the event logs and got the trace of the exception uncaught,

  Name: error

  GUID: 9c3cd62e3320b498

  Time: July 22, 2010 23:26:47

  No detail message

  net_rim_cldc-3 (4AD92B52)

  ResourceBundle

  getObject

  0 x 9141

  net_rim_cldc-3 (4AD92B52)

  ResourceBundle

  getStringArray

  0x918A

  MyApplication-13 (4C487910)

  Constants

  0 x 477

  MyApplication-6 (4C487910)

  Main

  loadRes

  0x10B2

  MyApplication-8 (4C487910)

  Splash

  run

  0x1DEA

  net_rim_cldc-1 (4AD92B52)

  Thread

  run

  0xB332

  How is it a generation of application relates to another application? NewApplications resource files is in conflict with the OldApplication resource files are same in both applications?

  "NewApplication" works fine if I uninstall 'OldApplication '. In fact, I want two applications to work very well.

  All thoughts.

  Problem solved!

  When I rename all localization resources, java class files resource was not updated bundle id. It was referring old bundle id file.

  So I create new files resource and copied the old content file.

  Now, the two applications work correctly.

• Different results of the property 'configManager.snmpSystem' of HostSystem executing vCenter and when run directly from host

  We are seeing different results for the property of the HostSystem 'configManager. snmpSystem' from vCenter and when you access from host.

  I think that the result should be no different. Is this another known issue or am I missing something here?

  To confirm this behavior, we tried to show the property to the host through the Explorer managed objects (MOB) and also by the VMware Remote CLI scripts. Join the results of the CLI script that was running on our test systems.

  Best regards

  Damodar

  Greetings, I just wanted you guys to know this problem that you are experiencing is a known problem with VMware and our engineers groups are working on it.    Sorry for the inconvenience to you.

• Remove the line breaks in the HTML Source Code

  Is it possible to remove all line breaks in the code source HTML generated by Dreamweaver? After using the Dreamweaver design view window, I want to assure you that all the source code of the html page I created is going on a single line. Is there a simple way to remove all line breaks, or tell Dreamweaver to create the HTML code on a line?

  Ki Song says:
  > Is it possible to remove any line break in the HTML source code
  > generated by Dreamweaver? After the use of the design view window in
  > Dreamweaver, I want to assure you that all the source code for the
  > goes from html page I created on a single line. Is there an easy way
  > to remove all breaks online or tell Dreamweaver to create the HTML code
  > code on a line?

  http://www.TJKDesign.com/articles/whitespace.asp

  HTH,
  --
  Thierry
  Articles and tutorials: http://www.TJKDesign.com/go/?0
  Perfect FAQ page: http://www.TJKDesign.com/go/?9
  Templates CSS - P: http://www.TJKDesign.com/go/?1
  CSS tabs menu: http://www.TJKDesign.com/go/?3

• A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  Hello

  I get the below error message while my windows application inserts data in SQL Server.

  A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  I use LINQ-to-SQL.  SQL Server is installed on Windows server 2003.

  We are using SQL server 2008 r2.

  When we insert large data base records, approximately 1 million we get this question.

  Please suggest.

  Hello

  When you use Windows server, we ask you to send the query in the link depending on whether they are the experts.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you.

• The kernel source codes - correct links and files

  Try to download the source code of the kernel for Acer Z series - Z120 smartphone:

  Guide App. Acer 1. The kernel Source code. (more...) 1.0 500.0 MB 2013/03/19

  and try to unpack this file (approx. Guide_Acer_1.0_A41J_A.zip) after downloading. Have a normal unpack, but received 'Acer_AV051_Z120_1.004.00_WW_GEN1H_opensource.tar.zip.001' file with no chance to decompress the kernel source.

  Please, hard links and files.

  Another question: where is the kernel for Z110 sources.

  Please, help me and other users,

  Thank you, Dmitry

  OK, unzip it

  need 4 archives, unpack sound with zip, after using 7z to unpack all in tar.gz and after you unpack archive.

  And in archive a corrupt copy of this archive

  Can be better - repack archive (less 1/2 size)?

• Large number of unwanted emails that all appear to come from the same source

  Original title: spam E

  Currently, I get a lot of junk emails that all appear to come from the same source. I was put in my blocked list but the sender then change the address source slightly and I get more. Does anyone know how I can stop this. My address change my only option

  You use Windows Mail? Assuming that the subject field also changes, you could do a message like that rule.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want that messages not in the address book to go to deleted items.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  Be sure to see these links for more options.

  A few tips:
  http://insideoe.tomsterdam.com/tips/rules.htm

  Message rules does not? :
  http://www.insideoe.com/FAQs/why.htm#rules

• I have synced my LR my android mobile. Why the images in a different order from the catalogue on the PC and how can I get them in the same order?

  I have synced my LR my android mobile. Why the images in a different order from the catalogue on the PC and how can I get them in the same order?

  You can check the order of Lightroom Mobile synchronization.

  Click on the collection name and choose the last option to sort.

  It should be similar to this screenshot:

  

  Once you get to know Lightroom Mobile images sort order, you can set the same sort order on your desktop of Lightroom.

• Video of the program different from the video source?

  Although I'm not really experienced or well informed at first, I used it for a few short films and other projects. I'm not sure why I'm having the issue I am. My video source is different from how it appears in my the program monitor.  I tried with different sizes of

  The video source is the program on the right and left. I tried to export the video and I couldn't make it too look like the video source. The exported file was either as video or zoomed in the program. The two ways are grainy. Sorry, if this is an easy solution. I'm having a hard time finding anything online that can help me.

  You have the wrong sequence settings.

  Learn Premiere Pro, get help and support. Adobe Premiere Pro CC

• How can I get the html source code of beeing displayed page?

  In the previous version of Firefox (4) the view menu contained option 'page source '. In the current version (6) this option disapired.

  Oops! I have it! Been moved from Tools/Web Developer / Source Page.

  See you soon,.

  Peterat

• How to REMOVE the macro source code?

  Somehow, I managed to record a macro of source code, and now I can not delete it!  Worse, I've added a macro key, which I keep hitting (naturally) not by chance.

  Worse, I can't remove this macro!  The option is grayed out.  I can also delete the shortcut key assigned to it.  What I'm missing here?

  

  I myself is not entitled, concentrated it as the temporary macro. It seems as if the temporary macro cannot be removed, so that your solution to fill it with harmless instructions is the way to go.

  Given that whenever you record a temporary macro you overwrite the previous content, you can simplify the macro by recording a single statement only.