Similar Questions

• LabVIEW 2009 Student Edition Vista x 64 install no failure, no error message even though

  I am trying to install a copy of LabView student edition 2009 and initializes whenever installation, modules fail to install for each single module.  Also, there is no error message.

  I received a message that LabView can not work properly because of the firewall Windows, which I disabled it. This message sent me on ni.com/frinfo, code expm69.

  Let me know, I'm a little confused as to what is happening.  It would be due to a patch or what not?

  Thank you!

  Hi imagineerme,

  It is possible that the CD is damaged.  You can either try a different CD if you have access to one, or because you have access to a student version, you should be able to also access LabVIEW via ni.com/src.  All LabVIEW versions are available for download on this site. Please let me know if you are able to download LabVIEW from there.  NI.com/SRC will also specifically download the 64-bit version of LabVIEW, since you have a 64 bit OS.  I hope this helps!

  Kim

• I can't place a multipage in Student Edition

  Hello

  I Student Edition v11, and I don't see an option "Place-> several pages. I guess that my version isn't this option? If so, can someone tell me how I can do milti-pages with that?

  If it isn't...

  1. are there other ways I can link different patterns with my version. Or...

  2 are there free Multisim versions that do not have many pages activated?

  Any help would be greatly appreciated.

  Hello

  Sorry, but yes there are a few things that the edition of the students is not compatible. Here's a comparison table to see the differences between it and the educational edition. And no I don't know anyway to bypass the student version restrictions.

  http://www.NI.com/white-paper/5630/en

  Kind regards

• Remove the watermark of the professional edition of labview student edition

  I have a professional and a Labview student edition.  I installed them in total two different folders, so that nothing could "mix - and - match."  So far, nothing to do, it seems to me delete this watermark of my professional edition, which is a matter of gene and also something that I don't want my customers to see (because my software is legitimate).  Help please!

  
  

• Want to upgrade Windows 7 Starter to Windows 7 Student Edition, but should I wait for Windows 8?

  I want to improve my windows 7 starter to windows 7 Student Edition kit, but I know that windows 8 will come out at the end of October. Should I wait to upgrade until there or should I buy just student Windows 7? If I update it soon with the release of Windows 8 would be entitled to a discount?

  Update Microsoft Office Starter to Microsoft Office Home and Student will be all different running on Windows 7 or Windows 8, it will still work. So, I would upgrade now if you need the extra features and functionalility home and student offers.

• What is the best way to properly activate the Lightroom Student Edition? Is the edition of students a permanent program, or it disables it after that student 2-4 years, as some other programs which are the versions?

  I just bought the student Lightroom edition! I am very happy to use it and start creating beautifully modified pictures, but I'm a little unsure on a few things. He says that I have to prove my eligibility to use student edition which won't be a problem, but what is the way the faster and easier to present this evidence? I also fear that the student edition will be temporary and I have purchased this program only to have it end after 4 years as some other programs that are student versions. Is the student a permanent program of Lightroom edition that I will have for life or it will turn off after I graduate?

  When I bought my academic version of Lightroom, it's a whole package. Inside was a yellow card with instructions on how to check that I qualified for the academic discount. I presented my academic e-mail address and other info, as requested on this yellow card. Less than 5 min. I received my serial number. Very simple. I had no problem whatsoever.

  There is only one version of the program Lightroom itself. The only difference lies in granting licenses and pricing. If you are eligible for the academic discount, by all means use it. You buy the same Lightroom program that someone else does. It does not expire, there are no missing features, and it can be upgraded when new major versions are available. These updates will cost the same as they cost to anyone else, regardless of how they bought Lightroom.

  You can move confidently until you have received your serial number. The only thing you do differently pays an initial purchase price lower because of your academic status.

• the lightroom 4 students edition upgrade

  If I bought Lightroom 4 as a student and now upgrade to the latest version of Lightroom, but'm not a student anymore, can I buy the regular upgrade for it?

  Yes. The student edition is the same exact, just different program license and price. And after you purchase the edition student qualifies you to buy any subsequent upgrade.

• Can I buy Student Edition?

  Can I buy Student Edition if I am a student of the Russian State University of cinematography (VGIK) n.a.S.Gerasimov?

  There are different rules for different countries. I think you should contact Adobe to get a definitive answer. The rules cited by kglad have an asterisk that lead you to the following:

  * Schools are those that are approved by an association recognized by the U.S. Department of Education / State Board of Education or Canadian and provincial education departments and teach as their main objective. In the United States, these associations include: Middle States Association of Colleges and schools, North Central Association of universities and schools, Western Association of Schools and colleges, Southern Association of Colleges and schools, New England Association of Schools and colleges, the Association of accredited of the Northwest schools.

  These rules have meaning within the United States and the Canada for a purchase USA and Canada. If you are not eligible to purchase to the United States, you may be able to purchase in Russia.

• How to serialize a Student edition of SC 6 without a hard drive on mac?

  Hello

  I would like to know how to serialize a Student edition of SC 6 without a hard drive on a macbook pro.  I thought that I could download and install the trial version and then serializes it once I got the license code.  However, someone told me that would not work because the Student edition and downloadable trial version are different...

  Is this correct?  If so, how can I install it?

  Thank you

  CUONG

  The person who told you the configuration is different from the edition of the students and the download is different, he / she is worong.

  the Setup is the same, and you are more then welcome to download and install it.

• I don't see the icon of NOR-DAQmx in measurement window in Labview 2013 (student Edition)

  Hi all:

  I installed the driver NOR-DAQmx and Labview 2013 (Student Edition). I connected an acquisition of data NI USB-6008 and tested using NOR-DAQmx and that it works correctly.

  Now, I tried to make registration of data of this device using the software Labview installed but as I open a new project and go to the block diagram and show the measure menu I can't NEITHER-DAQmx icon in the window (Menu) measurement in Labview 2013 (student Edition).

  Any suggestion?

  I enclose two screenshots.

  Help, please.

  Thank you

  In what order did you install software?

  You must install LabVIEW first, followed by DeviceDrivers!

• Problem view Lab mathscript rt suite student edition

  I bought the suite 2012 Student edition software recently, according to the descriptiton on NOR it should have mathscript on it, but I get error when I run mathscript below. Comments about how to solve the problem would be appreciated.

  LabVIEW: Module MathScript RT is not installed on this computer, expired or is terminated improperly. Install or activate LabVIEW MathScript RT Module on this computer to continue using this product. Visit the Web of National Instruments to ni.com buy these products. If you have already purchased this product, select help > activate LabVIEW components to activate this product.

  This is the link I bought:

  http://E5.OnTheHub.com/WebStore/OfferingDetails.aspx?WS=49c547ba-f56d-DD11-bb6c-0030485a6b08&VSRO=8&...

  I run window 7.

  Setup may be separated on these discs or on another drive anyway, your serial number needed to activate it and it still would be set up as its own separate module. Please download the module Mathscript RT the link in my first post. You can also download other modules of our Web site and should be able to enter your serial no for them to activate in the License Manager EITHER.

  It looks not to the module Mathscript RT is installed or installed in the wrong order.

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• 8.5.1 LabVIEW Student Edition - differences between the Mac and Windows versions?

  Hello

  I just bought the student of LabVIEW 8.5.1 version and I use Mac OS X 10.4.11. What are the biggest differences between the Mac and Windows versions, since the box came with a CD of installation of Mac and a Windows DVD Installer?

  See you soon

  Looks like you got the LabVIEW Student Edition Software Suite DVD.

  It comes with 6 boxes to tools, and the TME product, some (or all?) of those who are windows only (at least 8.5), for example:

  • Toolkit Digital Filter Design
  • Modulation Toolkit
  • SignalExpress
  • ...

  Since you have 8.5, you are missing also a few basic things that only recevied at the 8.6MAC support, like Mathscript, Control design and Simulation and native 3D graphics.

• Acquire data with LabVIEW Student Edition

  In the meantime, I have to choose NI LabVIEW Student Edition of 2013 and 2013 LabVIEW student Edition Software Suite. The difference is about $ 40 for me. If the old let me remote controls via port series and an acquisition of data using NOR-DAQ-6008, then I can save money. I read a few other threads and the answer seems positive, but I just need a little more confidence before spending the student earned money!

  For serial communication, you need NI-VISA and to use the 6008, you DAQmx. The two drivers are free and available on the Support page. The rest of the student is not necessary at all if that's all that you do.

• Triangular LED with labview student edition

  Hello, im new to LabVIEW, I wud would like to have a triangular LED for my project. In my view, there are solutions for the normal version.

  http://forums.NI.com/T5/LabVIEW/how-can-I-make-a-triangular-led/m-p/613889

  Unfortunately, I use LabVIEW student, so above solution Edition isn't compatible. Is - that any organisation other solutions?

  Thanks, Madarapu

  Why do you say that it is not compatible? According to the specifications, the Student Edition has all features of the 'normal' version, so the control editor (which is what is used to create the LED in the example you linked to) is available. Have you tried to perform the steps as stated? If so, was there a specific one that did not work?