Digest the lag when running during the generation of the ant script

Similar Questions

• Run the Ant script using Java in webcenter Portal

  Hi all

  I have requirement where I have to run an ant script using java or by any means to the webcenter portal.

  Ant script must be run on a triggering action.

  Please help me in this direction.

  Thank you and best regards,

  Shakir

  Hey all,.

  Here is the solution, I had finally

  BuildFile file = new File ("myBuild.xml");

  Project p = new Project();

  p.setUserProperty ("ant.file", buildFile.getAbsolutePath ());

  ConsoleLogger DefaultLogger = new DefaultLogger();

  consoleLogger.setErrorPrintStream (System.err);

  consoleLogger.setOutputPrintStream (System.out);

  consoleLogger.setMessageOutputLevel (Project.MSG_INFO);

  p.addBuildListener (consoleLogger);

  p.init ();

  ProjectHelper helper = ProjectHelper.getProjectHelper ();

  p.addReference ("ant.projectHelper", assistance);

  Helper.Parse (p, buildFile);

  p.executeTarget (p.getDefaultTarget ());

  Kind regards

  Shakir

• 12 c: SOA deployment using the ANT script

  We seek to deploy a composite SOA 12 c using the Ant.. As a first step, we use "Ant-sca - package.xml ' to create the package and then deploy using the file" Ant-sca - deploy.xml. One of the properties required by the script is "compositeDir". When we set this value to the composite directory, we get an error composite.xml is missing. And if you change its value in the "soa" with composite directory folder, it works.

  Confirmation, as what value need to affect the property "compositeDir".

  Thank you

  compositeDir is the absolute path of the directory that contains composite.xml, then you must set the property compositeDir as baseDirectory/SOA.

  For a question related to the location of the jar file, there is a known issue already documented here: Known Issues for Oracle SOA products

  Check the details under the heading: "Oracle JDeveloper and ant control Deploy SAR files in different directories;

• Error during the deployment using Ant Scripts

  Hello
  
  I use the Ant scripts for projects on the Enterprise BPM deployment.
  
  However, every time I try the project deployment deployment takes a long time (about 15-20 min.) followed by the following error message:
  
  
  means: Java heap space
  
  This error message is followed by several lines explaining the same error.
  
  
  Kindly help me with the solution or the necessary changes I have to do in order to get the deployed project.
  
  
  PS: When I try to deploy some of the examples given, they all work very well.

  try to increase a lot of ants
  Export ANT_OPTS = "- Xms256m - Xmx256m" (ksh/bash)
  Define ANT_OPTS = "- Xms256m - Xmx256m" (Windows)

  HTH
  Peter

  Edited by: user12083480 the 23.10.2009 11:45

• CFEXECUTE / ant script return do not result in the CF

  I have a batch script that is running an ant script that is running "cvs log h application.cfm" on the cvs server.
  
  When I run the script commands manually on the command line, everything works fine.
  
  When I run the command via CFEXECUTE script, the batch works very well, the ant script works fine, but the cvs command does not seem to do anything. The results of the tag are:
  [echo] front
  [echo] after
  
  As you will see the (unchanged with the exception of the cvsroot attribute) attached ant script, echoes are and part of the cvs command.
  When running from the command line, I get the results of the cvs log command between these lines, but I get nothing with the CF.
  
  Any ideas on how to get this to work at all will be greatly appreciated.
  
  
  

  I use 7.01, but I corrected the tag CFEXECUTE by restarting the service CF twice.

  I also managed to finally get the CVS little work - changing : ext: to : ssh: -which I'm sure I've tried before and it wouldn't work, but it works now so I'm very happy.

• Lag when another application is running in the background

  Hello

  IM, building an application with Flash which strongly relies on the transformation of 3DMatrix

  My application runs smooth and hits a framerate of 30 frames per second, so this isn't the problem.

  The problem is that when I switch to another application, Angry Birds for example, and then switch back, my application gets horrible lag.

  The only thing that helps is to kill the other application that is running in the background.

  I use Air 2.6, but the same thing happened when I was using the REIT

  Did anyone here know how to solve this problem, or why this happens?

  Thank you!

  -Edit - it's on iPad

  Hey there all,

  If I had tried all week with 2.6 and thought I understood, but this discussion completely helped.

  I had been cacheAsBitmap parameter to true for items in my screen and saw some gains performance - 20 fps at 27, my FPS is set to 30). the problem was that all the background apps caused late major development of animation during the test on the ipad. LOW quality setting back me at 30 fps (even 60 fps), but some of my rotated bimtaps suffered in Visual quality.

  I just went back inside and cacheAsBitmap set to false for all the items on the screen that I have tested and while the performance returned to 20 fps max, it is very regular and don't lag when other applications are in the background. I noticed that even if I only hide the context item, I start to see stuttering if there are background running applications.

  It seems as if you are not dynamically bitmaps, and you use just bitmaps, then by setting quality step to LOW and not cached anything (no cacheAsBitmap or cacheAsBitmapMatrix) you can get a solid 60 fps without lag, even when there is background applications.

  you will see also much faster additions of items to the list of display when caching is not enabled.

  for 3d, is the only thing I can think is that you cannot forcibly turn off cachAsBitmap, then you could try making it to an another bitmap and use this new bitmap to the screen. I think that as long as you don't add all cached items to the display list, you can see the performance you want.

• How to load a picture of the XYgraphs when running

  Hello everyone.  I need to load a picture of the XYgraphs when running.  Each element of the array is a collection, an item is an XY Chart.  Each curve on its own XYgragh is generated as part of a search optimization.  The number of curves generated based on input from the user during execution.  Resulting curves can be sorted by the user according to different criteria.  Using the sorted curves, the user selects one or more games associated with operating conditions.  So, only 1 curve by graphic, as each curve has its own functioning conditions who were responsible of his generation (the other members of the collection).

  When I try to connect the data a little test vi, I get the error listed... that seems to be complaining that my data types match actually! ??

  Thanks a bunch

  Terry

  Look more closely at your data types.  Upstairs, you have two tables 1 d of double grouped.  While done in a 1 d table.  It is a pink cluster, transformed into a table 1 d of pink cluster.

  Look at the empty table going into the shift register.  Your XY graph is a table 1 d with a bunch of Brown.  This Brown cluster consists of two double scalars, not the two table 1 d double you up there.

  In your loop For on the top, try to convert the blue Angelfish in doubles, then the two values to group together.  Feed this cluster at the edge of the loop For and auto-index on this tunnel. Now, you will have a table 1 d with a bunch of doubles.  Which feed the element of the XY cluster at the bottom.

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have to check if no job has run during the last five minutes.

  I have to check if no job has run during the last five minutes.
  I need to store five minutes in a table separate from five minutes can be changed to 10 minutes in the future.

  I will be pulling out of this table in the following query.

  SELECT CASE WHEN COUNT (ROW_WID) = 0 THEN 'NO JOBS RAN AFTER THE SPECIFIED TIME"END

  FROM W_ETL_RUN_SDTL WHERE START_TS > (SELECT sysdate - (SELECT * FROM XXAFL_MINUTES) the double);

  
  

  Start_TS - date and time of beginning of the tasks/jobs

  XXAFL_MINUTES - table, which keeps the number of minutes

  
  

  Can you please help me to create the query. I'm not able to store five minutes in the table. What format should be the column?

  The query above returns null, even if a job ran.
  

  If you want to store an interval may be the interval data type would be a reasonable choice. Maybe something like:

  create table check_intervals)

  my_interval days apart on the second

  );

  insert into check_intervals (my_interval) values ('5' minutes of interval);

  Select count (*)

  of dba_scheduler_jobs

  where start_date > (select sysdate - my_interval)

  of check_intervals);

• How to add a PPR to the button when running

  Hi all
  I have a text named "status" entry and it has links to this method

        public void setStatus(RichInputText status) { 
          setCurrentRecordStatus((String)status.getValue());
          System.out.println("status value is"+(String)status.getValue());
          status.setAutoSubmit(true);
          this.status = status;
      }

  And I have the "submitBtn" command button and I set the disable property to this method

        
      public boolean isDisableSubmitButton() {
        if (getCurrentRecordStatus() == "E") {
            disableSubmitButton=false;
        } else {
           disableSubmitButton = true;
        }
          return disableSubmitButton;
      }
  
      public void setCurrentRecordStatus(String currentRecordStatus) {
          this.currentRecordStatus = currentRecordStatus;
      }
  
      public String getCurrentRecordStatus() {
          return currentRecordStatus;
      }

  I want to put the partial "trigger" property of the command key is the id of the input text 'status' when running so that the property enable and disable the Refresh button.
  
  I can't do this design-time for many reasons, one of them is that the button is on the template and the content of the page changes after menu selection.
  
  My question is: how to add a PPR to this button during execution?
  Help, please
  Thank you

  Hello

  Try like this I hope this helps.

  for example:

  Jspx page:

  
  
  
  
  

  At the bean:

  private RichPopup * bindpopUp *;

  public String testmMethod() {}
  AdfFacesContext.getCurrentInstance (.addPartialTarget(*bindpopUp*));
  Returns a null value.
  }

  * Note :*

  Add partialsibmit if you use all the action in the component.

  Remove the partial triggers in the page, if you gave for the same component in the managed Bean. Add target partial bean or in the page... in a place...

  Kind regards
  Guillet

• Interportlet communication for the portlet added when running in thewebcenter

  Hi all
  We have two portlet based on two ADF workflows.
  We add these two portlet on our page during execution using the web space...
  I mean, dynamically, we add these portlet on my page when running.
  given that we do not have any page design time that can hold these two pages together so
  as per my understanding between these two communication portlet is not possible by using the contextual action (using the producer and consumer).
  Anyone may provide some pointer how to facilitate inter portlet communication in this case.
  Any prompt response is appreciated.
  
  Thank you
  
  Riko.

  I adjusted finished my first version of the draft of the white paper.
  It still needs some work, but it contains most of the data. It's more than I thought, but that again, I have added a lot of information on how to create portlets adf from scratch, so you can use this white paper as a tutorial to create portlets adf.

  If you have any questions, please let me know if I can include additional information in the white paper.
  You can find the project here:
  http://www.contribute.be/c/Document_Library/get_file?UUID=436efbdd-1db0-4d44-b679-daf9995edca5&&GroupID=10234

  Published by: Yannick.O on September 5, 2010 16:47

  Published by: Yannick.O on September 6, 2010 08:14

• Select the first value in the list of values when running in poplist

  Hello
  IM using forms 6i. I filled the poplist by request. But what I need, I want to choose the first value in the list of values when running...
  
  That is to say, during execution, the poplist should have chosen its first value in the list of values.
  
  What to do...
  
  Concerning
  Sery

  WHEN CREATING a RECORD of the block of the list item or after the filling of the list item, you can write

  : my_list_item: = GET_GROUP_CHAR_CELL ('my_list_item', 1); / * If the data type of the item in your list is character.*.

  Here, instead of 1, you can give any clue... 1: value to the first list item position

• Activity monitor close unexpectedly when running in the background on the left

  Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

  Activity monitor also using a lot of energy since the upgrade?

  Any help would be appreciated. Thank you.

  Model: MacBook Pro (retina, 13 inches, early 2015)

  OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

  Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

  If you have moved a previous version to a different location, it will not work.

  If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

• Lag when using track changes in the large document

  I do experience lag when using "track changes" in a large .pages document (about 180 pages). I get the wheel of the Rainbow for about 10 seconds after completing each change, which makes it very difficult to obtain concrete results. Other applications on my computer work simultaneously without a hiccup. I use the latest version of the pages on the latest Mac OS. Anyone with a similar problem? Tips to solve this problem?

  It's unfortunate that Apple has not adopted an icon "Achtung Minen!" for the v5 Pages. It is slower than the second coming on intermediate to large documents, and it only gets worse when you add images at higher resolution. Apple has not designed there is a professional-quality, or as a realistic replacement processor for MS Word.

  There is nothing you can do, but seriously, re - evaluate your software solution for processing.

  Here's an icon from the WAD of v5.6.2 request Pages. Prophetic isn't?

  

• Screws disappear from the windows taskbar when running

  Hello!

  It is a strange happening in the world when running LabVIEW 2014 or 2015 on Windows 7.  When the VI property-> the appearance of the window-> Custom-> customize-> box 'allow to minimize the user window"is unchecked the VI disappears from the taskbar when running.  It is moderately annoying, anyone know if there is a good reason for this behavior without papers?  Other than to keep the box checked, is there another way to prevent that from happening? I don't really feel like swapping through all possible combinations. :-)

  Thank you!

  C

  In fact, it's documented behavior.  Access the help file for this dialog box properties.

  There is a note that says: