Dim 4600 adding ST3120215ACE PATA Seagate drives

Similar Questions

• Dim 4600 adding hard drive Seagate - new drive not recognized

  I bought a ST3500641AS Seagate SATA/300-RK

  That's the one

  http://www.staples.com/webapp/WCS/stores/servlet/StaplesProductDisplay?&langid=-1&StoreID=10001&splCatType=1&catalogId=10051&ProductID=169534&cmArea=SC3:CG6:smileyvery - happy: P1928:CL140461:SS1034645

  I installed it, but the new drive is not recognized.

  Do I have to move the jumpers on the motherboard?

  Is the motherboard Intel Desktop Board D865PE

  http://www.Intel.com/design/motherbd/RL/rl_confg.htm

  or

  set the bios at startup?

  or

  What is the problem?

  The old drive is connected with tape.

  The new Seagate I connected using the Interface cable provided in the box.

  I have to go buy some kind of adapter?

  Thanks for the help.

  I forgot to say

  I want to do what you say

  make the primary by cloning Seagate

  and then finally not use the 80 GB.

  Here is more information from another post of mine.

  http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_harddrive&thread.ID=142020

  Thanks for the help.

  CDO

  
  

• Adding a new hard drive on e9180t

  Hi, I have e9180t and I'm considering adding a new hard drive.

  Can my office manage 3 to/6.0 GB/s 64 MB Cache SATA internal hard drive?  I get my full performance out of it?

  I read the possible combinations (http://support.hp.com/us-en/document/c01817977 specification page

  Is there a limit to the capacity of the hard drive?  (up to 2 TB)?

  Can handle a 6.0 GB/s transfer rate?

  I currently have 2 hard drives in the following:

  1 TB - Barracuda (st31000528as) 7200 RPM 32 MB SATA 3.0 GB / s
  500 GB - Maxtor DiamondMax 21 (STM3500630AS) 7200 RPM 16 MB SATA 3.0 GB/s

  If I buy 3 to/6.0 GB/s hard drive and use it as a hard drive, will I use these two hard drives as a secondary hard drives?

  Thank you!

  For those who might be interestd, this is what I found after some digging and calling:

  Since the motherboard that comes with e9180t (ipmtb-tk) is SATA 2, its speed is limited to 3.0 GB/s.   When 6.0 GB/s hard drive is connected, the speed will slow down to 3.0 GB/s.

  You can only use the full 3 TB capabity if your motherboard bios has opportunity to support UEFI interface.  However, most of the motherboards built before 2011 doesn't have this option.  ipmtb-tk is one of them.  However, there is a work around.

  1. go in the bios and check that the interface is set to AHCI (non-RAID).

  2. when the disk partition is loaded, you will be able only to the 2 TB partition.  another partition 750Go seems a separate partition that you cannot change.  Partition the 2 TB the way you want to and install Windows 7 on it.

  3. after that excavation is done, download Seagate Disk Wizard.  Later one of their homepage did not work, however.  You must download this one:

  http://www.seagate.com/staticfiles/support/downloads/discwizard/DiscWizardSetup-14382.en.exe
  

  I don't know why they don't have this default link on their home page when you go to download DiscWizard.

  Once the wizard disk is installed, it will pick up the 750Go that you weren't able to before partition as a new drive and now will allow you to partition.   (Keep the MBR instead of TPG setting, format it to NTFS)

  Once you partition using the tool, Viola!  a new drive with 750 GB of space has been added as a new drive.

• Seagate drive back up the partition problem

  Hello

  I have a problem with a Seagate drive on my mac.

  The drive is 1 TB and I formatted into 2 partitions: 1 exFat and 1 for Time Machine. All worked fine for the last 2 years, but now when plug the drive into my mac it loads only the partition exFat (I can access the content of it.).

  Backup partition isn't appearing any more. I tried to open disk utility, but it won't let me see my discs, while the Seagate is connected. (I thought about it when I unplugged the Seagate drive, everything is back to normal).

  If I want to eject the disc it will freeze it and drive the LEDS will not stop fashing until I take out the usb cable.

  Experienced this kind of problem?  I would be very grateful if you could help me.

  
  

  MacBook Pro with end of 2013 Retina display, OS X El Capitan

  When you used the drive the first time, have you installed the utilities supplied on the hard drive?

• I have added an external hard drive to my XP but cannot access

  I have added an external hard drive to my XP but can't access it because I have no letter in my computer. not very conscious of their hope if someone can give a sense computer question and help thanks

  You have posted in a forum dedicated to provide feedback on the web site of Microsoft Answers.  It is unlikely that you will get the help you need here.  Instead, please ask to Windows XP 'Hardware and drivers' forum here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware.

• Windows 7 Professional does not start upward when adding a 2nd hard drive is stuck on the windows logo

  I try to add a 2nd hard disk - a disk seagate 1.5 to - win7 will not start - stuck - up when I connect the drive.

  I have another drive, a 160g WD drive - it starts ok w / that a connected.

  Why is it ok w WD drive / 160g of starter, he recognize etc ok but won't start w/1.5 tb seagate drive?

  both are sata drives - connected to the same sata port when I try of their

  "richiedude4444" wrote in message News: * e-mail address is removed from the privacy * .com...

  Nevermind - I found it for my # model/serial

  fact firmware uupdate and still win7 crashes at startup looks like I got a new seagate brick.

  As it is a new drive and is under warranty, contact Seagate for replacement.  Any company can send a piece of equipment DOA.

• How will I know if I have Seagate drives on my computer?

  How will I know if I have Seagate drives on my computer? Where should I LOOK? And on the computer does not start, without rhyme or reason. The Microsoft Loading Bar Guard will and.

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  If Windows is not loaded, you can enter the BIOS and hard drive model number in the list. You can also open your computer and look at the hard drive itself.

  Have you tried "F8" to enter in Windows 'Safe Mode' during the starting of the computer? Have you tried to use your disk to repair Windows to solve the problem?

  Please send BRAVO

• How can I run two disk hard of (adding a 2nd hard drive) on the flag a1020n?

  How to do two hard drives on the a1020n Pavilion, after adding a new hard drive for my existing CPU?  My old hard drive is out, so I will install a new hard drive, redefinition of the new hard drive, but I still want to have access to the old disk until I have transferred all my personal files to the new drive.  I saw answers to self-help.

  Yes. I often throw in additional disks other PC as a second drive... just give Windows a minute or two to find and configure the drives after their installation. You can use the Explorer to browse the file structure.

• Adding smart card reader driver

  Are there guidelines for adding smart card reader driver?

  There is a link at the bottom of http://www.blackberry.com/developers/docs/4.7.0api/net/rim/device/api/smartcard/package-summary.html to this resource page, but it seems to be dead.

  Is it possible to get it also?

  Thank you for this comment.  I'll get the fixed link.

  For now, you can see the JavaDocs included with the BlackBerry JDE 4.7.0 release, which includes this missing page.

• Adding PERC H700 3 drives in PowerEdge R710

  Hi all

  I need to increase the storage on a server running non-critical virtual machines.

  I currently have 3 x 600GB discs and a VD in raid 5.
  We will be adding 3 more identical drives, staying in raid 5 to increase storage.

  I read a few posts about similar improvements where the user was instructed to use OMSA to add readers and keep the data. This server is not running Windows, it works VMESXi 5.5.0.  I'll add the disks directly by the PERC controller... My data at risk doing this? Should I rely on the added time to re - install VMESXi and restore my VMs?

  Thanks in advance!

  J

  Hello

  You are wanting to add the new disks for RAID 5 existing or create a new RAID 5? If you create a new, do it in the controller should not be any problem. If you are wanting to expand the existing table that needs to be done in OMSA and not in the controller. You can use OMSA for ESXi http://www.dell.com/support/contents/us/en/19/article/Product-Support/Self-support-Knowledgebase/enterprise-resource-center/Enterprise-Tools/OMSA

• Used the external drive for catalog/photos for months. Yesterday-> error msg: "LR cannot open the catalog"StanLRCatalogRepaired"on"Seagate Drive - LR Photos"because LR cannot save changes to this place. LR catalogs cannot be opened on removable disks,

  Used the external drive for catalog/photos for months. Yesterday-> error msg: "Lightroom can't open the catalog named"StanLRCatalogRepaired"located on the 'Seagate Drive - LR Photos' volume because Lightroom can't save the changes to this place. Lightroom catalogs not opening on the network volumes, removable storage, or read only volumes. »

  The first thing to do is to check if somehow the permissions for the drive Seagate or any of its relevant folders/subfolders has changed somehow (an OS update maybe?)

• Adding an additional HARD drive to Dell Dimension 4600

  HARD drive how much can this system take, I ask because I want to add an additional hunting with taken all readers currently in PC (2). Any help would be appreciated. Regards.Johno65

  Hi John,.

  Thank you for your response.

  Dimension 4600 system board connectors are as follows:

  • Connector 40 pin primary IDE channel
  • Connector 40 pin IDE secondary channel
  • Floppy drive 34 pin
  • 7-pin Serial ATA connector (2)

  The Dimension 4600 supports up to 4 ATA/100 devices on 2 IDE channels. However, it has flanges/casing for two drives internally accessible only. If you do not connect a third drive internally, there is no place to fix in the system chassis (such as the hard drive bays can contain only 2 hard drives) so it could be hung out of the system. Alternatively, you can connect external USB hard drives as needed on the system.

  Answer please if you have other queries.

  Thank you and best regards.

  Babita S
  #iworkfordell
  Learn more about Dell Product Support, drivers & downloads, Order & Dispatch status -> Choose your region U.S. customers; Clients of the United Kingdom; Visitors to the India. For technical support Dell video clicking here.

• Do new HD SATA boot drive, makes existing corrupt SATA HDD in slave (Dim 4600)

  I got the dreaded "Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM" message; When I boot on the recovery cd or chkdsk or restore the system registry hive backups worked.  Of course I've been lax with data backup, I have years of pictures of children on the hard disk, in the BACK I can navigate through folders with photos and they appear healthy and safe.  I'm afraid that going too far with reinstalling XP will jeopordizing the files, so I decided to install a new HD as boot drive and make the existing one a data drive (slave, secondary disk drive) and save the images and other data once I return.

  TMI I realize - here are my questions

  1. it will work?

  2 can I simply connect the new drive to J8G1 on the motherboard and move the existing drive from G1 to G2?

  3. can I use one of the cables that hang to the new HD?  (the existing one is plugged into a black connector P3, P5 black looks identical).

  4. should I run only the new HD for a while, then plug the old one back in?  Or it doesn't matter?  Other implicit messages of the system could have badly recognized both drives if I ruin this part.

  5 will be any SATA disk that fits in the space doing case, or should I meet a min spec?  My inclination is to gravitate toward 'cheap' unless there is a reason not to.  Existing OEM HD is a Seagate Barracuda 7200.7 160 gb SATA.

  Any guidance would be appreciated.

  THX, Dino

  Message edited by dinosaur3000 on 03/22/2008 16:16
  Message edited by dinosaur3000 on 03/22/2008 18:21
  
  

• Value added package and touchpad driver for Linux

  I need to value pack and a Synaptics touchpad driver and it should work on Ubuntu Linux.

  Where can I find it?

  Hello!

  I put t know what phone you have but the Toshiba value added package is available for Windows. I checked the Web from Toshiba site but for Linux I can t find it.

  The driver for the touchpad, normally you can also find on the Toshiba site but it s is only available for Windows. Maybe you can find a driver on the site of the factory, for example, Synaptic.

  Good bye

• Pavilion p7-1254: I have added a second hard drive then how closely I put it to the top and use it?

  A year or two ago the original HD died and I took it to a shop and they replaced and now I did know they put in a Western digital 320 GB which is full now. so, I got a seagate 2 TB and have it instaled in the case and now I need to know how to set up? should I move or clone all the info on the new drive, or use both at the same time?

  Hello

  Now, you have two drives, C: and another new letter (e.g. D on your computer.) All new file you save on D:, not C:. After a week or two to settle down, if you want, you can start to move old data/files in C: D:, especially videos, music or old files.

  Kind regards.