Dimension of the attribute on the same dimension

Similar Questions

• Resize all pages in a PDF to the same dimensions (height, width)

  I have a big PDF file of several hundred pages in which all the pages have slightly different dimensions. I want to resize these pages in such a way that they will all have the same dimensions. I tried to do it with the crop in Acrobat tool, but if I get all pages in one fell swoop, the resulting dimensions of the page will always be the same for all pages. I can't get page dimensions the same if I harvest each page separately, which is not really fun to do with a 300-page document. Does anyone know if there is a simple way to do this in one fell swoop? I can always crop (rare) pages that do not perfectly match thereafter.

  Hi Bronwater,

  You can print to the Adobe PDF printer to a desired page size, but it will flatten your PDF & the other option is going to be trimming the PDF file.

  Kind regards
  Nicos

• Export the file HAVE to PNG format in the same dimension created

  Hello

  
  

  I'm an illustrator file of the size of 1000px * 1000px. Have selected the 300 DPI when the file was created.

  
  

  So was the point where I pasted, then export in PNG file increase to some other dimensions.

  
  

  The exported file is used for printing T-shirt, so it must be in 300 dpi.
  

  
  

  y at - it a help in this?

  Enjoy your entries in it.

  Suresh,

  A total of 3000 x 3000 pixel image size is 10 inches at 300 DPI.

  For example, you can create the illustration/work plan at a size of 3000 x 3000 pixels and just save for the Web or export at 72 DPI.

  You can create the illustration/work plan at a size of 10 x 10 inches and export at 300 PPI or save to the Web by setting the size of the Image to 3000 x 3000 pixels.

  The two will give the same picture with the same size of file that can be printed in the same size/quality.

  Or something similar.

• Set the same dimensions to several objects

  Is there a way how I could put the same width and height to several objects selected with different dimensions? I don't want to go through all these objects one after the other and set the size manually... Maybe a script would be available? See the example below. Thank you

  

  Try the script set all things by wundes

  Wundes.com

• The dimensions of the tablet can be defined as the same thing in the primary in a reactive mode?

  My size I want to implement for the primaries, in addition to the Tablet, will be 1024 X 720. When I try to put these same measures (1024 X 720) for the display of the tablet of CP8, it cannot afford to do. It always shows only smaller. How is it not a problem when I export?

  

  I know that you're the next question: "why you use delicate design if the primary and dimensions of the tablet will be the same? Well - that the power did not exclude future publishing to Android tablets or even iPhone. So I wish I could keep them all in a single file, see what I'm saying? Maybe it's just a case where this is not possible, is it?

  Kevin, if the Tablet is used in landscape mode, it will use the main view. View of the Tablet is intended for the Portrait to Tablet mode.

• Problem in creating several attributes XML with the same name of the attribute

  I am trying without success trying to create several attributes XML with the same name, as shown here in a Microsoft example configuration file:

  
  
    
       
       
       
    
  

  I'm calling the NewDocument GetRootElement functions and then "newelement" (appSetting), "newelement" (add)

  Then I call AddAttribute with add, key & Key0, then with add, value & 0.  This seems to work fine but when I try to add the second pair of key & Key1 and value attributes & 1 for item "Add" replaces ""and I find myself with"" only.

  I do something wrong or CVI is not able to create an XML of this type?

  Thank you

  Here's how you do it. I show not to keep things simple error checking.

  #include

  public static void CreateAddElement (mother of CVIXMLElement, const char * key, const char * value)
  {
  Add the CVIXMLElement;
  CVIXMLNewElement (parent, -1, 'Add', &add);)
  CVIXMLAddAttribute (add, "touch", key);
  CVIXMLAddAttribute (add, "value", value);
  CVIXMLDiscardElement (add);
  }

  void main (void)
  {
  CVIXMLElement root, and appSetting;
  Doc CVIXMLDocument.
   
  CVIXMLNewDocument ("configuration", &doc);)
  CVIXMLGetRootElement(doc, &root);)
  CVIXMLNewElement (root,-1, "appSetting", and appSetting);
  CreateAddElement (appSetting, "Key0", "0");
  CreateAddElement (appSetting, "Key1", "1");
  CreateAddElement (appSetting, "Key2", "2");
  CVIXMLDiscardElement (appSetting);
  CVIXMLDiscardElement (root);
  CVIXMLSaveDocument (doc, 1, "c:\\temp\\temp.xml");
  CVIXMLDiscardDocument (doc);
  }

• Simple question - alternative text of the attribute in the same Word document

  Ok. I am having a brain freeze and cannot find the answer in the help of the OPA. Simple question.
  
  Is there a simple way to alias an attribute for use in Word?
  
  For example, the following two conclusions create 2 attributes where I want only 1 attribute.
  
  annual percentage rate = 6
  APR = annual percentage rate
  
  Is there a configuration option or something to alias APR as the rate of annual percentage for use in Word? I want to use in the same Word document. Something in my head tells me that I have seen that once before, but all of a sudden, I've got a brain freeze.
  
  Sorry for such a simple question, but sometimes I get too deep into the weeds.

  Hi Paul,.

  You may think the style of the legend of OPA. In the 2007 OPM Office Ribbon it's called legend of the table, but I think that it works with the rules of non-table in Word as well - it is certainly used to.

  It's a style of OPA rule which can be used when you want to refer to an abridged version of an attribute, for example "APR" rather than "the annual percentage rate. According to me, that it applies only to the immediately lower rule where it has been defined in the doc and the doc not complete.

  I did a quick search in the help of the OPM and found references to the style of legend, but I have not found a description of the functionality (search is not too good if).

  Essentially how it works...

  Above the rule to write the version abridged, then the word "is", then the text of the full attribute, for example

  APR is the annual percentage rate
  

  Side note: I have always "BOLD" the "is" in the callout line. It is not necessary, but I want to do it because it makes it more clear at a glance what part is the shorthand and which part is the text of the full attribute.

  Then apply the style of the legend of the table to the line, then put your Word table or the ordinary rule underneath, for example

  [legend]APR is the annual percentage rate
  
  the result = APR * 10 
  

  I use this feature occasionally. Usually it is when I have calculations in Word tables and I'm trying to make the more readable left column, for example using something "APR" in the formula so that it does not take much space.

  See you soon,.
  Jasmine

• Different LOVs of af: query and af:form for the same attribute of VO

  Hello
  
  We need show different LOVs af:query and af:form for the same attribute in VO.
  
  Is it possible to use LOV Switcher for this?
  
  Can how we use in the LOV Switcher attribute to check if she is seen Critearia line or VO?

  Please see this post - http://jobinesh.blogspot.com/2011/04/identifying-request-for-lov-from-search.html

• ITS filter - adding several filters with the same custom attribute

  Hello
  
  I added the attributes of custom search and am able to add a filter to the doOracleSearch method.
  
  filter [0] = new filter (New Integer (100), 'NUMBER', 'equal', 10020);
  
  Now I have to add another filter for the same attribute of research with or condition, how can I do this...
  
  I tried the following...
  
  filter [0] = new filter (New Integer (100), 'NUMBER', 'equal', 10020);
  filter [1] = new filter (New Integer (100), 'NUMBER', 'equal', 10049);
  
  But how do I specify it's or and the code above does not work.
  
  Thank you.
  Vermorel.

  Here is an example of this using 11 g. Note that you need to connect programmatically if the data is secure.

  Create the search service and to define the URL of SOAP
  SearchService OracleSearchService = new OracleSearchService();
  searchService.setSoapURL ("http://myserver:7777/recherche/requete/oraclesearch"); ")

  Download the data to the research group
  DataGroup dataGroup = new DataGroup();
  dataGroup.setGroupName ("MyGroup");
  DataGroup dataGroups [] = new DataGroup [1];
  dataGroups [0] = dataGroup;

  Get a list of all the attributes to fetch
  Attribute [] attributesAll = searchService.getAllAttributes("en");
  ArrayList attributeIds = new ArrayList ();
  for (attribute a: attributesAll)
  {
  attributeIds.add (a.getId ());
  }
  Integer [] attributeIdArrayAll = Integer [attributeIds.size (new)];
  attributeIdArrayAll = attributeIds.toArray (attributeIdArrayAll);

  Create filters (BE sure THAT THE FILTER ID IS CORRECT - I do not pretend you code it but rather browse the list of all of the above attributes and get ID like that)
  Filter [] myFilters is new filter [2];.
  myFilters [0] = new filter (124, "Number", "EQUAL", "129224");
  myFilters [1] = new filter (124, "Number", "EQUAL", "123730");

  Request (be SURE to USE ' or ' as the operator between the filters)
  Result OracleSearchResult = searchService.doOracleSearch ("", 0, 50, false, false, dataGroups, "fr", null, true, 'or', myFilters, attributeIdArrayAll);

  Get number
  int hits = result.getEstimatedHitCount () .intValue ();

  Print results
  ResultElement [] resElements = result.getResultElements ();
  for (int i = 0; i)< reselements.length;="">
  {
  Download the document
  ResultElement doc = resElements;
  }

  I hope this helps!

• Attributes with the same name - ADF BC Validation Messages

  Hi all
  
  I have two entities and associated views. Each of them have attributes with the same name. In my particular case, they are two dates - StartDate and EndDate. EndDate on both entities have validations (Expression of Script). The validations to check that the end Date is later than the Date of departure - "return newValue > StartDate. Is this a valid validation groovy script for dates?
  
  I have a unique creation page that contains these two entities. What is happening now, is that if the validation fails even one of the entities, fields of both entities are reported. In some cases, I can even see two validation error messages is displayed.
  
  Needless to say, rename the attribute on one of the entity (and the corresponding view object) seems to work.
  
  I have a simple repro case (contains Jdev project and SQL script) here - http://dox.bijesh.info/reproValidationMsg.zip and a screenshot here - http://dox.bijesh.info/ReproADFBCValidation.jpg
  
  Would be very happy if someone could either point out what I'm doing wrong or confirm that it is a bug.
  
  About:
  
  JDeveloper 11.1.1.3.0 JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  11.1.1.56.60 ADF business components
  Oracle IDE 11.1.1.3.37.56.60
  
  Edited by: Bijesh Krishnadas November 25, 2010 04:21 - corrected the groovy expression

  Bijesh Krishnadas wrote:
  FWIW, I've changed the validation script for "return false" on an entity and "return true" on the other. This leads to the same question as well.

  This seems to be a bug.

  However, using a validator compares as stated earlier is the right way to accomplish what you're trying to do.

• How to open the LR3 catalogue with the same attributes that closed?

  The LR2 when any book is opened you are directed to the place exactly the same you were when the catalogue was closed.

  All attributes are alerady together and you go directly to the image itself and the Panel you stoped working.

  It doesn't happen on LR3 or, at least, I couldn't find a way to do it.

  Is there a place to set this feature?

  Tnks ;-)

  He always has the same behavior... you use LR 3.2?

• Different look of two of the same videos after having copied them.

  Hi community support.

  I copied a video (screen 1) a difference in sequence so that I can change it without losing the original that I created.  On the video copy I made my changes, and when I visited the new sequence of the video I noticed the video had black areas at the top and bottom (Screen Shot 2).  Why is this happen and how can I solve this problem.  I also noticed that the GSM logos have been distorted, I don't know how fix the logos, but also curious why it happened also.  Thank you for your time and help in answering this question.

  Randall

  

  There is a difference between the sequence the sequence #1 and #2 parameters.

  Access your source sequence, where you have copied the clip. Click anywhere in the timeline panel. Type the command + 0 {zero} to display the sequence settings.

  Check the dimensions of your pixels and the framework.

  Now pass your new sequence, where you have pasted clips and do the same for the new sequence. Compare the results.

  The screenshot you posted, it seems that your original sequence could have an incorrect Pixel Aspect Ratio.

  Unless you have specific reason besides, video HD should always have a Square Pixel Aspect Ratio:

  

  MtD

• How can I configure analog several outputs at the same voltage

  I need the same voltage to 14 different outputs analog output. The only way I can think of that is shown in the attached image - IE. build a table. With 14 this looks messy - can you imagine how it would look with more! Is there a more orderly way to do this?

  Dave

  Hello

  you want the same voltage setpoint for all channels so u 'initialize the array"give the dimension size you want, I think this will help u

• I am a customer of Qwest and they changed all my "Hotmail" email and I do not. How can I go back to msn mail. At the same time, I would also uninstall instant messenger.

  I am a customer of the West and they changed my "Hotmail" email  I like the way he was with msn.  At the same time, I also want to disable or uninstall Instant Messaging on my computer.  I'm "Dell Dimension 2400 Series with windows XP"

  Hi ARMELDEDEHOUANOU,
   
  -Are you talking to disabling Windows Live Messenger?
   
  Your email account cannot be changed by Qwest. MSN e-mail account is the same as the Hotmail account.
   
  If you have problems with Hotmail, post your request in the Forums of Hotmail for assistance on this issue.
   
  If you are referring to Windows Live Messenger, follow the steps in the link below to uninstall the same.
  Remove Windows Live Messenger

• The DV6 DV6-6131us-6150us using the same box?

  I recently purchased a DV6-6131us to Fry. I am very happy with it and have decided to make a few adaptations. I intend to buy a sticker for her to skinit.com, but I can't find the 6131 on their list. I is however listed 6150 and looks like he's using the same 'case' as the 6131. I wonder if they do not have the same dimensions. If they do, I can simply use the 6150 to buy my sticker. any help with this would be greatly appreciated.

  Hello
  Welcome to the HP Forum!

  Tithe wrote:

  I recently purchased a DV6-6131us to Fry. I am very happy with it and have decided to make a few adaptations. I intend to buy a sticker for her to skinit.com, but I can't find the 6131 on their list. I is however listed 6150 and looks like he's using the same 'case' as the 6131. I wonder if they do not have the same dimensions. If they do, I can simply use the 6150 to buy my sticker. any help with this would be greatly appreciated.

  They are the same with only minor variations. The differences are the color and material (plastic/aluminium) to the lower part and external coating outside LCD display.  The specifications of your laptop show that your notebook has an AMD processor with an aluminum housing, there is a special part for that one number. I contact skinit.com before ordering and ask them. There is a entry form at skinit.com where you can suggest to your laptop must be cut to order.

  Kind regards
  ERICO