Insert the disk with games error

Similar Questions

• Error: "Please insert the disk:" - customer-delivery - ppd.xrm - ms ".

  I'm trying (for over a month now) to install FSX on my machince to Windows Vista.  I have more to satisfy the standard requirements for installation.

  I installed FSX successfully a couple of weeks.  However, the activation code provided in the package was "invalid".  The activation of product in the FSX folder open-therefore, I have found a number of phone, but without opening the application, I did have an activation screen number.  So, I could play for no more than 30 minutes.

  I uninstalled FSX to try to reinstall and activate.  Now, when I'm in the installation phase, disc 1 is complete, and almost all of disc 2 ends when I get the following pop up: "Please insert the disk:  It is not a disc number, that's all just empty.  The file that it is stuck with trying to install is "C:\".... "Licenses\client-deliverance - ppd.xrm - ms.  (I have a Windows Vista activated, so I don't know why it's having a hard time to verify the license, if it, in fact, that this file is trying to do.)

  I did a system restore, and I still get the same message when installing.

  Any ideas or advice on fixing it?  Next steps?  And, I can't reinstall Windows.  I lost the software.

  X11creed, wait no response from MS, take a look at this:

  http://flyawaysimulation.com/postt27803.html

  Look at the last message in cheezyflier. It works!

  The link for the cleanup utility does not work, but you will find with google or MS, do not mix when he says this is office cleaning uility or so. This works.
  Do so by following the instructions, my problems went away and I reinstalled just clean copy.

  See you soon,.

  SUP

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Satellite 2140CDS: message: "insert the disk and press a key".

  Hello

  I got this laptop but the necessary update. I tried to put a master drive from my other laptop to update and it came with 'error' and now when I turned it back on it does nothing about it, totally blank and rpet "insert the disk and press a key".

  I've got everything I can think but still can not do anything.

  Please can someone help?

  Hello

  What do you mean with master drive? Do you mean the Toshiba Recovery CD or what?

  It seems that the laptop can not find a source of seed and so this message appears on the screen!

  If you use a FDD drive please check if the disk has been removed.

  You must simply insert your Toshiba Recovery CD and boot from the CD/DVD drive. That's all.

  PS: Check if the HARD drive isn't too bad, as if the internal HARD drive is malfunctioning you will not be able to reinstall the OS from the CD

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• IType.exe - no disk in the drive. Insert the disk in drive D:

  I have a message that says "itype.exe - no disk in the drive.  Insert the disk in drive D:"I do not know how to delete or correct this problem... help, please.  Thank you!!!

  Hi LauraCzarnecki,

  1. when exactly you get this message?

  2. did you of recent changes on the computer?

  IType.exe is a process belonging to the Microsoft Intellitype keyboard software. This can probably occur due to corruption in the registry for the key intellitype.

  If you have any IntelliPoint or IntelliType software on the system installation, then try uninstalling and reinstalling.

  For more information, please visit the following links:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Hope this information is useful.

• can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  ReemaPuri wrote:

  in the workspace image:-resign.jpeg

  

  As a button? Seriously?

  Ok. First of all, because the image already contains text, there no point in including the same wording in the form of text on the button. Accessibility requirements can be met using re-sign as alternative text. 4.2, create an image button:

  Tag/Alt text: Re-sign

  Static ID: re - sign

  Style button: Image

  Button Image: & WORKSPACE_IMAGES.resign.jpeg

  To make the image looks more like a button, add the following CSS to Inline CSS property page:

  #re-sign img {
    margin: 0 2px 2px 0;
    border: 2px outset;
    border-radius: 4px;
  }
  #re-sign img:active {
    margin: 2px 0 0 2px;
    border: 2px inset;
    border-radius: 4px;
  }
  

  Finally, there is a bug in 4.2 that generates the incorrect URL for the button images, which requires dynamic action of Page Load to fix.

  Event: Loading the page

  Action: Run the JavaScript Code

  Code

  var resignImg = $("#re-sign img");
  resignImg.attr("src", resignImg.attr("src").replace("/i/", ""));
  

• Deeper debugging on the "deployment operation failed on the agent with an error...".

  I tried to deploy a very simple plugin, a couple of settings with Snmp Fetchlet. Nothing complex.
  
  ILINT pass (although I'm not specifying a file of target.xml as examples and models do not seem to correspond to what expected the DTD), here is the result:
  -bash-3, 00 #... /emctl ilint d 0-i sysman/emd/no_targets.xml m sysman/admin/metadata/my_storage.xml - c sysman/admin/default_collection/my_storage.xml
  Oracle Enterprise Manager 10g Release 10.2.0.1.0
  Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
  Not analysis Instance file target (targets.xml)
  Validate the Collection target sysman/admin/default_collection/my_storage.xml file
  Validating target metadata file sysman/admin/metadata/my_storage.xml...
  Target the sysman/admin/metadata/my_storage.xml successfully validated metadata file
  
  The plug-in is imported into Oracle EM GM 10 5 correctly.
  
  When I try to deploy, I get an 'error '. I go to the screen deployment errors and warnings and that's:
  Deployment operation failed on the agent with an error state
  
  Where can I find some sort of journal or information more deeply in the error state?
  
  Paul

  The preferred credentials you set for the agent where you try deploy it, are the same identifying information for the user who owns this agent install? During the deployment, files that are placed on the agent receive the same permissions and owner as install other files on the agent.

• HP Pavilion dv6: System recoovery after replacing the HD because of the disk hard 301 error

  I have problems with the original of my HP Pavilion dv6 PC hard drive portable. I get an alert (SMART disk error 301) every time that I reboot, but I can still load my Windows 7.

  I just bought a new hard drive (SSD SATA3), but I would like to recover my original OS using my license key.

  How can I do? Should I create a partition on the new disk (D, copy the contents of my RECOVERY disc and use Esc + F11 after reboot?) Do I need a recovery CD/DVD? In this case, can I create one of my system?

  Thanks in advance.

  Hello
  
  Drive smart error 301 indicated fall drive hard/failed hard drives
  
  If you have recovery disks, no need for product key, insert the disc after replaced by the new fair SSD & insert the recovery disks to reinstall everything, including the recovery partition.
  
  You can also order HP recovery discs
  
  You must ensure that the size of the SSD is equal to or greater than the size of the previous HARD drive to perform successfully the recovery discs recovery.
  
  If you have not created recovery disks, you can create one - http://support.hp.com/us-en/document/c01867418
  
  Back up all your personal data now first.
  
  Thank you

• my computer reads the disks of game like the sims 2 double deluxe

  my computer reads that I just bought a set of sims. the game was brand new and this computer has just been rebuilt fo me. can I do it myself so that I can play the games that I want to install from a disk?

  Hello

  ·         It happens with all CD/DVD?

  Method 1: try and check if the drive works with another computer.

  Method 2: clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Method 3: if it happens with all CD/DVD, run the fix if from the following links.

  Your CD or DVD drive cannot read or write media - A Mr Fixit: http://support.microsoft.com/gp/cd_dvd_drive_problems

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• G72 Pavilion. : no boot device. Insert the disk and press any key

  My hard drive died recently. I installed a new. Now I'm gettig no boot device - insert boot disk and press any key. What should I do to fix this?

  Hello

  If you find your recovery DVD, you can use them to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not, you can order a replacement set by starting at the link below-, the cost can vary a bit depending on where you live, but they are generally inexpensive.

  Order HP recovery disks.

  If you have a problem with this link, try to order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• -Pop-up message: insert the CDROM with the virtual truck program

  When I start my computer, a message is displayed as below;
  Please insert the CD-ROM with the virtual truck program. Looking for file: D:\installs\PaceEth\VTruck.exe
  Can someone please guide me to get rid of him.

  This application did not work for me but I google and found out that the virtual truck Installer is a program that enhances the Internet connection on a point to point protocol over Ethernet (PPPoE) line.
  This problem may occur if the virtual truck program that is installed on your computer is damaged or missing files.

  To resolve this problem, use the following methods: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 829714

  I hope this helps.

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• Check the disk with Vista Home Premium

  I'm doing a disk check on my C drive with windows Vista, Home Premium, ed. I get to the point where it asks if I want to plan the audit to the next time I start the machine. But when I check that, close and restart, nothing seems to happen that my normal startup. Why is it not showing me that a disk check is happening or why it's starting the disk check? Thank you.

  Have you tested the hard drive itself with the maufacturer of hard disk diagnostic utilities?

  `~`

  The current time and the date now in Oregon, United States

  15:33
  Sunday, July 7, 2013
  The time Pacific daylight time (PDT)-0700 UTC
   
  UTC/GMT is 22:33 Sunday, July 7, 2013
              
  Current weather conditions in Portland

  Cloudy67 ° F / 19 ° C

• "Please insert the disk" drama, but he had to get the USB files

  Hello
  I tried to do some homework and generally save them on my USB disk of 4 GB, up to our days, the car worked well (even when the phone fell off my bed and the USB it folded kind of last night). I went to school and used without any problems at all until a class when I logged on a computer and it told me that the message "insert a disk in the drive removable (E)", I had not thought much of it because the pc to school can be quite slow at times. Went home and have encountered the same problem, had not actually saved a good copy on my laptop so there is mistake no. 1. So I googled the problem found some solutions and none have worked so far, I can understand that it works perhaps not properly because it folds (but could be fixed / back into place, the damage wasn't bad at all).
  Is there anyway that I can my laptop to read the USB so I can extract the files it contains, if I can actually do my homework?
  I'd appreciate any help at all because this assignment due tomorrow and even if it is a heavy task to write again I really want to solve the problem,
  Thank you.

  Your USB may have been permanently damaged.

  Try this program to extract the assignment thereof:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  See you soon.

  Mick Murphy - Microsoft partner