Director 11.5 projectors do not work in Windows 98 - why?

Similar Questions

• Photo explosion deluxe doesn't does not work with windows XP, why

  I tried to install photo deluxe explosion 2002 on my windows XP computer. It loads but does not open why

  Hello

  I suggest you try to uninstall then reinstall the program and check if this may help:

  http://support.Microsoft.com/kb/307895

  It will be useful.

• LifeCam 3.0 does not work on windows 7 Why?

  I can not even finished with the installation of this software why? In the installation process, you may not set up the webcam Lifecam HD (last step)

  Hello vlad-k,.

  Thank you for visiting the Microsoft answers Site.

  To help, is there an error message during installation?  If so, please relay the error message.

  Also, have you tried to run the Windows Installer CleanUp utility to remove the previous 3.0 LifeCam installation files listed under method 2 in the previous link provided below:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  If so, please relay if the same problem occurred after you run the Windows Installer CleanUp utility.

  You can run the Windows Installer CleanUp utility to remove all files previously LifeCam 3.0 installation and then try to install again.

  To do this, unplug the LifeCam 3.0 device and please try Method 2 in the following link:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  After you run the Windows Installer CleanUp utility to remove all files previously LifeCam 3.0 installation, check the control panel > programs > programs and features to check that there aren't any ads for the LIfeCam device. In the affirmative, please right-click on the LifeCam program list and click on uninstall.

  Then, you can click on the link below to try to install the LifeCam 3.0 appliance software.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=68c-00001&OS=Win7_3264&lang=en

  If the problem persists, you can also continue to method 3 to verify that the Windows Installer service is set to automatic in the same article as well:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  I hope this information is useful. Please let us know the status after the above steps so that we can provide additional assistance.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• LG hs101 - I projector does not work with the pc

  • We connect LG HS101 I - projector with our leptop but the projector does not work. or our leptop is not react the attached devoice. Please let us sujjest solution.

  Hi Vishnu,

  1. What is the brand and model of your computer?

  2 how you connect the projector?

  I suggest you to follow the steps and check if it helps.

  a. connect to a projector to your laptop, start the laptop under windows and turn on the projector. The projector will show its default projection.

  b. go to the Windows, made desktop right click Properties, choose settings, then advanced.

  c. go to the TwinView tab. It should be in Standard mode. Below, select Detect displays and it should work and obviously the blink of projector or the thrill and then device settings option should be visible. Select it.

  d. choose option "Select output device", then this screen, select the analog monitor, click ok, and then again on ok when it gives you the last rites and then after dark for the laptop and projector, should get windows on the projector.

  To get the video on the screen of the laptop too:

  a. go to TwinView and select Clone. Then OK and OK again, and after a dark other period, Windows should be both.

  To return to normal, turning off the projector and disconnect it from the computer.

• HP Deskjet 2512 Director does not work on Windows 7? Is there a solution?

  HP Deskjet 2512 Director does not work on Windows 7? Is there a solution? Everything that happens is two pages of text, open, but no Director. I downloaded and installed the latest version of the software full version DJ2510_1313. No help for it?

  Hi DJ2512,

  I understand that you have a Deskjet 2512 which is not able to open the Printer Wizard, it opens to text pages. I'm sorry to hear that, but I'll certainly do my best to help you!

  From what you described, it seems that your printer wizard opens to a page of the Notepad. I suggest you follow this document Opens Assistant HP printer with an error in Script or in Notepad to get the problem resolved.

  Hope this helps, have a nice day!

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Pavilion 550-122nd: mouse and wireless keyboard do not work before Windows starts (10)

  The wireless keyboard and mouse (that came with the computer) do not work until Windows is started.

  I want to make a (ghost) image of my hard drive using the boot CD Norton ghost 15.0 (but it also applies to other bootable devices).

  When the CD boots and the program starts I have to click a button (OK / accept) to continue. At this point the wireless keyboard and mouse are not active jet. This is why I can't continue.

  Use a USB keyboard gives the same result (also not active at this point).

  Is there a solution / work around for this?

  Thank you.

  On the pilots seems plausible. Especially because on my laptop (older) with Windows 10 CD bootable (like Norton Ghost) don't Duke keyboard and mouse.

  I'll have a look at the new version of the BIOS and start looking for new tools that will accept my keyboard (and mouse).

  Thank you.

• Touch screen does not work in Windows XP - Portege 3505

  Hey

  Anyone know why the touch screen on my portege 3505 does not work in windows xp?

  A lot of cheers

  Steve

  and no one knows what you have done or installed on your laptop?

  Sorry about that, but who need to know that? Have you changed something on your laptop >
  Did you install a new OS? Have you used the Toshiba recovery image?

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• 1670 CDS satellite - modem does not work on Windows 2000

  Hi-

  I removed the Toshiba W98SE and installed Win 2000 (new installation). I managed to put it on the audio driver using downloads on your website (and it works).

  I do a test on the dial installation upward and that you have installed the modem also since your website (Conexant Soft K56 Data, Fax PCI Modem). This is intended for W98SE but microsoft message is

  The port looks ok. Please advise - is it the right driver?

  Thank you.

  A Windows 98 driver does not work on Windows 2000. Therefore, you need a new driver for Windows 2000.

  I have checked the Toshiba site but your model no available Windows 2000 driver exists.
  I think you have to search the site of the factory of the modem. Maybe you can find a driver or another portable model that has the same modem.

  Good luck!

• Some software will not work on Windows Vista

  Some software will not work on Windows Vista so I need to install Windows XP
  But how to download drivers for devices such as bluetooth, Lan, his...

  Hello

  I put t know what phone you use, but many Toshiba notebook series are delivered and support similar hardware parts.
  You can simply try to test and install the drivers from different series.

  The new Toshiba Bluetooth stack supports Vista and you can install it on all the laptops Toshiba which supports the feature of BT.
  Sometimes, you will get the chip card driver LAN or compatible Sound on the site of manufacture of chips like Intel, realtek, etc.

• Bluetooth does not work on Windows in Satellite C660-A047

  Hello everyone,

  I have a problem with my laptop (satellite c660-A047) Bluetooth does not work on windows (7 and 8), but it works very well under Linux (Ubuntu, Fedora, Backtrack).

  I have an outgoing method :) to do run on windows, start Linux Live then set the Bluetooth adapter to the off State, and then reboot (do not stop, restart only), and then start windows this time this Bluetooth adapter works great and updated automatically in the Device Manager.

  To use Bluetooth on windows I have to do the same steps: (.)

  If someone wants to know all the details to help me solve these curious case, I will be grateful.

  Thanks, looking forward to hearing from you soon.

  The laptop supports Wlan Atheros / module combo BT.
  This means that a single module shares WiFi and BT connectivity.

  Using Win 7 you must add the additional drivers called filter for driver Atheros BT package.
  So first the Atheros WLan driver must be installed, secondly Atheros BT filter after battery Toshiba BT.

  To help to win 8, you must install two components of driver manually to enable the Bluetooth feature: System Toshiba + Atheros Bluetooth driver driver filter
  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]