1670 CDS satellite - modem does not work on Windows 2000

Similar Questions

• Network does not work after Windows 2000 SP4 P2V

  It has been a roller coaster get this virtualized machine.

  A little history: this machine is Windows 2000 SP 4 with update Rollup 1. After you install the Update Rollup 1, virtualization tried it and it gets to 97% and then I get the message error "vmware agent has encountered an error. When I try to start the machine, I get a BSOD with error inaccessible_boot_device.

  After reading some discussions fo I found a solution of reconfiguing the virtual machine then it will start. So now, I have a virtual machine that will start.

  Now my problem is that networks do not work. I removed the network card, has added a new, tried static and dhcp, through the Add/Remove programs and uninstalled all the devices HP and Compaq, went into Device Manager and deleted all drivers HP and Compaq or component, rebooted countless times and I am still ending up with no network connectivity.

  The network card on the computer virtual says it is connected and he says is to receive, but not send. It is not pulling a DHCP address and a static address gets no where also.

  I have more than 50 virtual machines so I know this isn't a problem with my network, it must be on the virtual machine itself. I don't know what else to try, and I'm open to suggestions.

  Thank you!

  Have you tried to repair the winsock?

  1. Go in Start > run, type: netsh int ip reset c:\resetlog.txt

  2. Restart your computer and you're done.

  3. Follow the steps below if you have XP SP2 (this only works on windows XP SP2 and later versions).

  4. Go to regedit.

  5. Go to HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services

  6. Click on Winsock and Delete.

  7. Click on Winsock2 and Delete.

  8. Close registry.

  9. Restart your computer

  10. Access the properties of the LAN connection

  11. Click the install button in the Properties window

  12. Select PROTOCOL, and then click the Add button.

  13. Click the disk...

  14. Type C:\windows\inf\nettcpip.inf in the dialog box, and click OK.

  15. Choose from the list of INTERNET TCP/IP PROTOCOL in the list, and then click OK.

  16. Click CLOSE.

  17. Restart your computer. (At this point the Winsock is complete)
      not only avoid this problem from happening in the future, but also
      to make the process much easier you update Windows.)

  Try the following steps: http://support.microsoft.com/kb/837333

• Webcam on Satellite A200 does not work with Windows Media Encoder

  Material: TOSHIBA Satellite A200 (1GH) with built-in Chicony webcam.

  PROBLEM:
  When I use the software Chicony webcam - it works allright (video recorded normally).
  BUT: when I have Chicony software from Windows Media Encoder (preinstalled with Vista) - when I try to select the webcam as input device - and closing the error reported is "the device is not ready".

  This error also repeated if I select for driver webcam Microsoft instead of native driver Chicony webcam.

  Hello

  Download the latest driver Chicony and the software for the Toshiba page and install it.
  Don t forget to remove the old version.

  In addition, if you get the error message like webcam is used by another application or "device is not ready you must start the msconfig and should turn off and turn on webcam chicony and process service.»

  Good bye

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Satellite A505-s6970: Toshiba Service Station does not work on Windows 7

  Hey guys I need your help,

  I installed windows 7 ultimate on my toshiba Satellite A505 s6970 and I downloaded all the drivers from http://www.csd.toshiba.com/ and I installed all.

  When I open the Device Manager, 3 devices are not installed (Base-2 system device / / 1-Unknown device).
  Then I installed toshiba service station (Windows Vista / 7 32-64 bit because my windows is 64) it will search for and automatically download all necessary devices, but it does not work on windows 7, it worked perfectly in windows vista.

  Also the eco utility does not work, and the media touch buttons work just fine, but without giving that voice tone.

  Thanks for your help

  Hello

  To be honest I have no experience with this tool.
  I m using Tempro.

  However, I guess that Toshiba service station was not tested and not designed for Win 7 at the moment.
  You may need to wait for the next update that works correctly with Windows 7.

  You must understand that the Windows 7 drivers have been released in Beta version, it would mean that the final version would be released in the near future
  In my opinion, you should take a look from time to time on the Toshiba page we.
  I noticed that each new day pilot is released and released.

• Tecra M1 - Modem does not work (could not open a port)

  I have a problem: after you have reinstalled Windows XP and on my Tecra M1 drivers, modem does not work. It can not diagnose himself - he always comes a warning: "cannot open a port (COM). It can be used by another device or application. I installed the latest Toshiba drivers for the modem, but nothing changes. How can I solve this problem? Looking forward for your advice!
  Best regards.

  Hello

  Have you installed the drivers in the correct order? Not? So do it!
  Have you installed the software or additional devices which could have a bad influence on the modem?
  Check the status of the modem in Device Manager. You don't see any yellow exclamation?

  Try to start the test on the modem within the operating system.
  Check the operation of the Modem under
  Start-> Control Panel-> phone and Modem Options-> Modems tab-> properties-> Diagnostics
  by pressing the 'button interrogate Modem.

  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).
  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• Bluetooth does not work on Windows in Satellite C660-A047

  Hello everyone,

  I have a problem with my laptop (satellite c660-A047) Bluetooth does not work on windows (7 and 8), but it works very well under Linux (Ubuntu, Fedora, Backtrack).

  I have an outgoing method :) to do run on windows, start Linux Live then set the Bluetooth adapter to the off State, and then reboot (do not stop, restart only), and then start windows this time this Bluetooth adapter works great and updated automatically in the Device Manager.

  To use Bluetooth on windows I have to do the same steps: (.)

  If someone wants to know all the details to help me solve these curious case, I will be grateful.

  Thanks, looking forward to hearing from you soon.

  The laptop supports Wlan Atheros / module combo BT.
  This means that a single module shares WiFi and BT connectivity.

  Using Win 7 you must add the additional drivers called filter for driver Atheros BT package.
  So first the Atheros WLan driver must be installed, secondly Atheros BT filter after battery Toshiba BT.

  To help to win 8, you must install two components of driver manually to enable the Bluetooth feature: System Toshiba + Atheros Bluetooth driver driver filter
  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• Bluetooth on Satellite L500 does not work!

  Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

  My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

  After that I read some post and install the drives still does not work!

  I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

  Any tips?

  Just do so for sure:
  You have enabled your wireless switch?

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• HP Pavilion a6838f: modem does not work

  original title: hp Pavilion a6838f

  I have windows vista 64 bit hp pavillion desktop

  This is the modem does not work, however, I have to be online to download updates of my software that I use in this regard.  Anyone know if it is possible to connect this with another desktop computer and download the software to the one with the modem and install it on the hp?  My manual says nothing about this.

  You need to set up a network with Internet connection sharing. http://www.windowsreference.com/windows-vista/step-by-step-internet-connection-sharing-ics-setup-in-vista/.

  Here's how to connect the computers using a crossover cable (which is the cheapest solution):http://windows.microsoft.com/en-US/windows-vista/Connect-two-computers-using-a-crossover-cable.

  Your computer without connection will actually have a connection to the other computer, then you can do what you need to do.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my support of modem usb, USB 1.1, but it does not work on windows 7 to the motherboard desktop h61

  my support of modem usb, USB 1.1, but it does not work on windows 7 to the card mother h61 with duel core 2nd computer office prossesor genration

  If your USB modem is provided by your ISP, check for an Ethernet RJ45 port. If the modem doesn't, connect a RJ45 connection between the modem and the computer cable and UNPLUG the USB cable. Your computer should now connect to the Internet without any problem...

• Lenovo 3000 N 500 sound card and Modem do not work in Windows XP

  Hello

  I buy Lenove 3000 N500 a few days back from local sellers in PAKISTAN. It has built in Windows Vista.

  I change its Windows XP operating system, now my sound card and modem does not work, there is only PCI device in device manage with yellow sign, but in the Control Panel, there is no modem or sound card.

  I gave the two conextant Audio and Modem drivers against the PCI device but system says that there is no such device for these drivers.

  and when I run Setup conextant Audio and software of the Modem, it is said that there no such device FRO these drivers

  Please advice what to do to make it functional.

  Thank you

  Sani

  If you use the version pre - SP3 of XP, you must install KB888111. It's the UAA bus driver. After you install this hotfix, install the audio driver and modem driver.

  Enjoy.

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data