Similar Questions

• Disable keep scaling of display

  Hello

  I recently purchased a DV6-7030tx and have some difficulties to run older games to the underside of the native resolution of 1080 p.

  I think I need to disable 'Maintain display Scaling' in the form of the device, but this option does not seem to be able to be disabled. I am running the latest drivers for the 4000 HD Intel and Nvidia Geforce GT 630 M graphics that have been made available through technical Assistance from HP. I looked later directly from Intel/Nvidia driver download but was hesitant because of the problems of switchable graphics, I've heard before.

  Can anyone offer advice?

  Nevermind, I figured it. There is a keyboard shortcut in the configuration of the graphics card Intel HD (by default Ctrl-Alt-F11) to toggle the panel mounting. I didn't look at it there because the games used Nvidia gfx at the time. Turns out it works for the Nvidia card also. Hope this helps someone else in the future.

• How to disable the scaling software IPR and PPP compatible as Microsoft Office.

  original title: scaling software IPR and PPP compatible as Microsoft Office.
   
  Hello!
  Does anyone know how to disable the scaling of the DPI (or how custom scale) in IPR software compatible?
  In particular, how can I disable display picture in "Microsoft Office 2010"?
  Disable in properties of control does not work as it does for non-Microsoft programs.
  I have a screen 1440 x 900, and for most of the tasks, I prefer the screen so it should be about 4' of me usually use scaling of IPR. The problem is that in MS Office, the Ribbon of the toolbar > 25% of the screen on this setting. Hide the Ribbon is an option, but if I could selectively disable scaling (as I do with the chrome) - all my problems could be solved.
  Thanks for the advice/input!
  Rich

  Thank you for your empty insulting response. I wonder if your answer is just an automated response.

  Well, I was going to answer the Fahimulla K and politely point out that they may have misunderstood your question because you seem to have the "how-to" down to "Disable the display timing of high DPI settings" in the compatibility of most of the Programs tab.  So say what you said apparently is that Microsoft Office 2010 programs do not seem to allow that (the selection isn't activated - grey - so you cannot select)- but you have decided to go in a different direction (more rude/crude) before I got the chance.

  It will not win you a favor here - it is above all a forum for peer-to-peer (user to user).  Politeness a bit for the people spend their time (and as far as I know - the real Employees from Microsoft that poster here do still their choice, not obligation) goes a long way.  A little profanity goes even further - but not in the desired direction.  * smile *.

  However, I had planned on looking into this because he was intrigued, so despite the generally rude responses by you in the two posts, I found you so far - I'll post the results of my research (and my job steps) here in case it might be useful to someone.  I'll probably respond to the other post and a link to this post as well.

  At this stage, while having access to several computers, some with Office 2007 again and others with Office 2010 32 bit, I had not found the time to test and see if it is linked to all Office 2010 64-bit or not.  I confirmed that this setting does not seem to be available in Windows 7 (64 bit) for individual products Microsoft Office 2010 (64-bit versions.)

  An interesting thing I found in the Microsoft Knowledge Base has been "scale of the graphical object Microsoft Graph is reduced inside the bounding box when you insert it into a workbook in Excel" where they actually change you the setting in the Task Manager process tab-->.  This doesn't seem to work (not yet available) for common products (Word, Excel, etc.) as he says he does it to the CHART. EXE.

  So by doing research and without more information from you (such as possibly critical details that you probably have Windows 7 64-bit and 64-bit Microsoft Office 2010) and tests on one machine 64-bit Windows 7 but 32-bit Office 2010 - I note the checkboxes in the compatibility settings are available.  I first thought about this possibility when I noticed a part of this article:
  http://www.SevenForums.com/tutorials/316-compatibility-mode.html
  ... when they say, ' "NOTE: If the compatibility options are grayed out, then it is a 64-bit program and cannot be changed.".

  So - I would say the second part of the answer of the Fahimulla K would be a great place to start (and you did, looking at this post from you in the forums Microsoft Office... about a minute after the display of it here.)

  I think that you maybe isn't luck if - * if * you run the 64-bit version of Office 2010 that is.  Even Microsoft (for a long time - maybe still) recommended and installed Office 2010 32-bit default products.

  • http://social.technet.Microsoft.com/forums/en/Office2010/thread/40d17c38-90e0-48D9-8F83-d9721a24b063
  • http://Office.Microsoft.com/en-us/Word-help/choose-the-32-bit-or-64-bit-version-of-Microsoft-Office-HA010369476.aspx

  Not for the reason will be addressed during the conversation; even though it is an interesting puzzle and would not be limited to just Microsoft Office - but any 64-bit application, you can install.  Their idea was that in general there is some 64-bit plugins and same problem with 32-bit plugins that existed / exist for Microsoft Office.

  My suggestion, if my hypothesis about what architecture of Microsoft Office that you have installed is correct, would be to uninstall Microsoft Office 2010 64 bit and install Microsoft Office 2010 32-bit.

  Hope that helps someone.

• Disable the creation of files desktop.ini in Windows 8

  Hi all

  I want to know if this is a way to disable the creation of files desktop.ini, at least in the desktop system folder.

  I knew that under XP there was a DWORD key which should be created to avoid creating all the desktop.ini files in the computer.

  I don't want the desktop.ini file features (personalization of icon, remembering the last display in each folder options, etc.)

  So I don't want to hide the desktop.ini files. I want to remove them and avoid Windows 8 create again and again.

  If Microsoft has disabled this customization which was present in the earlier version of Windows and now is not available (to disable the creation of files desktop.ini) just say. If there is some other registry key to be created or modified, please advise.

  Thank you

  Pablo.

  Hi Pablo.

  I would like to inform you that the Desktop.ini is a system file that addresses common issues, such as downloads, Documents, photos and music etc. When a change is made in these files, Desktop.ini is updated.

  Deleting the file will cause problems with the operating system and it is not recommended to delete the files. The default desktop.ini a hidden system file and read-only attributes assigned.

  If you want to stop these messages, go to the files through Search Options, click settings and you will see the Folder Options, click on it and the view tab and scroll down until you see "Hide protected operating system files (recommended) and put a checkmark in the box."

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Windows 7-How to disable the Preview on my desktop icon, I have many files on my desktop, it's easier when all of the PDF files have the same icon instead of a preview icon.

  How can I disable the Preview on my desktop icon, I have many files on my desktop, it's easier when all of the PDF files have the same icon instead of a preview icon. so, I immediately see who is PDF and DWG. at the moment they all look different because the icon shows a preview of the contents of the file.

  Hi Khody,

   

  To change your windows 7 application icon you can use following the procedure-
  a. Right click on the desktop icon and then click Properties.
  b. now Select the shortcut tab and see button below to change the icon. Click the button change icon now all the icons.
  c. you can choose a of the icons that you want for the shortcut.

   

  I hope this helps.

• NB305-106 - display driver for extended desktop

  I would like to know if it is a driver display or in any way possible to have "Extended desktop" with my NB305 not cloned dual display?

  Thanks in advance.

  Hey Buddy,

  Normally, you can only choose options for external monitor in display driver options. There, you can choose between the clone mode or extended desktop.
  Did you check that?

  Otherwise, you must install the last display of the official website of Toshiba driver. Maybe there is a new display driver.

• Portege Z30t - how to disable display backlight?

  Hello

  I'm just trying to find how to disable the backlight of the display on my new Z30t.
  While the process is always running, just to save energy.

  Here, I have the FN keys to put the light upwards or downwards, but they won't back down to zero, and there is no key to stop.
  I've had 6 laptops so far, and all had a FN key to turn off the display to save power.
  So I'm kind of scratching my head, how to do here.

  In addition, I would like to reprogram some FN keys as I don't need FN standby and hibernation.
  Could not find information on this topic, also.

  Any idea? Help, please!

  Thanks, Tommy

  You can use the FN in order to increase and decrease the backlight of the display, but you can not close the screen completely using these function keys.

  If you want to turn off the display after a certain time, I recommend you to change the settings in the Windows power options.

  Go to the Control Panel-> Power Options
  Select a map page of power, on the left click here, choose when turn off the display.
  The parameters of change for the plan page, choose the display settings you want to use for this power plan when your laptop is running on battery and when it is plugged.

• How can I display TC on the desktop and on my mac?

  I do not see my time new capsule is in on my mac-window storage or on my desk. I managed a first backup that shows in my finder under shared devices. I clicked on attached servers - General - finder. I have a 27 inch, mid-2011 El Capitan 10.11.2 running and to the best of my knowledge the last airpot OS running

  The Capsule is a network ... that's why you see under the Shared heading in the Finder.  But given that the Time Capsule is not connected directly to your Mac... like a USB or FireWire drive can be... the time Capsule "will not appear" on the desktop or displayed in 'about my Mac'.

  With some clicking and tips, it is possible to mount the drive Time Capsule... called 'Data', unless you have changed the name... but this is not really of value because you must use the application Time Machine to access your backups Time Machine.

• Screen display - higher than normal desktop icons

  Somehow my settings of the screen has changed.  When I started, the desktop icons were larger than normal.  Go to e-mail, Internet... each screen display was became wider.  Circles now resembled ovals.  I have to scroll to the right to see what is out there.  How can I change the display of the screen so that I can see the entire screen without scrolling to the right?

  Hello

  There are a few things you can try:

  Change the resolution of the screen;

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  If that fixed it, go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  Or do a system restore to before that happened.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Display form OptiPlex GX620 desktop problem

  I have an Optiplex GX620 Desktop FF computer which was given to our Church for the office. I have recently installed 4 GB of RAM and a 80GB HDD SATA white. I have connected to a TV high definition with a PC connection.

  When I turn on the computer, two things happen:

  (1) the TV on the PC channel screen remains empty.

  (2) the computer will beep twice and 1-2-3 lights on the front is green.

  This could be a problem with the graphics/display in the computer card and what can I do to solve this problem?

  The add in video card with LFH connector can have Dual VGA. A dell cable would also a 1 and a 2 on it to indicate what monitor is 1 vs 2.

  Or remove the riser and pull out the card. Blue plastic parts are the locking tabs.

  

  

  

  

  

  Dell G9438 DMS-59/LFH-59 to Dual VGA Splitter extender cable

  http://www.txcesssurplus.com/servlet/the-10187/Dell-G9438-DMS-DSH-59-fdsh-LFH-DSH-59-to/detail

  

• Z10 blackBerry how to disable display timeout?

  I am a broadcaster to jerk and I want to use my Z10 to display the my channel chat room while I've aired, but I can't do that because the screen prevents calendar. Is it possible to stop this?

  Makes sense. Videos automatically disable the display time-out. No setting for this video; all automatic. It is a work-around.

  Tip: in the world of BlackBerry for each application, there is a command to contact the developer. I think that you select the app in your My Apps then press the three points at the bottom right. Anyway, you will be able to understand, so I have not double-checked. I would like to send the developer a suggestion to add the feature.

  Good luck.

• DWcs6 grid of fluid. 'None' added to the display but crash to desktop

  Hello

  
  I use Cs6 DW fluid grid. I did my version of office first, and I try to add a mobile browsing and delete the desktop version.

  I put the 'None' display in the css formatting and it removes the office and loaded the mobile version when shrunk. This is fine but for some reason her office crash do. It adds a border around the site and displays the content below where the footer should be: here

  Any help is appreciated!

  Thank you.

  It turned out a

  in the menu bar, I did not need and some how I managed to put a border in the head tag. Don't see a problem with the fluidgrid.css code, seems to work well. Thank you!

• SQL MORE: printscreen off or disable display result

  Hi all
  
  I am using sqlplus that accompanies the new oracle 11g release 1... Anyone know how I can disable myscreen to display the result of a query?
  I do not want to write in a file-just do not print output to the screen... I run a query where all I need is just the time spent and not the result because I join millions of records.
  
  Thank you and happy holidays

  SQL> SET AUTOTRACE TRACEONLY
  
  SQL> SET TIMING ON
  
  SQL> SELECT * FROM dba_objects;
  
  9656 rows selected.
  
  Elapsed: 00:00:00.13
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 2127761497
  
  ----------------------------------------------------------------------------------------------
  | Id  | Operation                 | Name          | Rows  | Bytes | Cost (%CPU)| Time     |
  ----------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT            |          |     8764 |     1514K|       39   (3)| 00:00:01 |
  |   1 |  VIEW                      | DBA_OBJECTS |     8764 |     1514K|       39   (3)| 00:00:01 |
  |   2 |   UNION-ALL                 |          |          |          |            |          |
  |*  3 |    FILTER                 |          |          |          |            |          |
  |*  4 |     HASH JOIN                 |          |     9815 |      872K|       37   (3)| 00:00:01 |
  |   5 |      TABLE ACCESS FULL            | USER$          |       27 |      459 |        2   (0)| 00:00:01 |
  |*  6 |      TABLE ACCESS FULL            | OBJ$          |     9815 |      709K|       34   (0)| 00:00:01 |
  |*  7 |     TABLE ACCESS BY INDEX ROWID| IND$          |        1 |        7 |        2   (0)| 00:00:01 |
  |*  8 |      INDEX UNIQUE SCAN            | I_IND1      |        1 |          |        1   (0)| 00:00:01 |
  |   9 |    TABLE ACCESS BY INDEX ROWID | LINK$          |        1 |       88 |        0   (0)| 00:00:01 |
  |  10 |     NESTED LOOPS            |          |        1 |      105 |        2   (0)| 00:00:01 |
  |  11 |      TABLE ACCESS FULL            | USER$          |       27 |      459 |        2   (0)| 00:00:01 |
  |* 12 |      INDEX RANGE SCAN            | I_LINK1     |        1 |          |        0   (0)| 00:00:01 |
  ----------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     3 - filter("O"."TYPE#"<>1 AND "O"."TYPE#"<>10 OR "O"."TYPE#"=1 AND  (SELECT 1 FROM
             "SYS"."IND$" "I" WHERE "I"."OBJ#"=:B1 AND ("I"."TYPE#"=1 OR "I"."TYPE#"=2 OR
             "I"."TYPE#"=3 OR "I"."TYPE#"=4 OR "I"."TYPE#"=6 OR "I"."TYPE#"=7 OR "I"."TYPE#"=9))=1)
     4 - access("O"."OWNER#"="U"."USER#")
     6 - filter("O"."NAME"<>'_NEXT_OBJECT' AND "O"."NAME"<>'_default_auditing_options_'
             AND "O"."LINKNAME" IS NULL)
     7 - filter("I"."TYPE#"=1 OR "I"."TYPE#"=2 OR "I"."TYPE#"=3 OR "I"."TYPE#"=4 OR
             "I"."TYPE#"=6 OR "I"."TYPE#"=7 OR "I"."TYPE#"=9)
     8 - access("I"."OBJ#"=:B1)
    12 - access("L"."OWNER#"="U"."USER#")
  
  Statistics
  ----------------------------------------------------------
         0  recursive calls
         0  db block gets
         2978  consistent gets
         0  physical reads
         0  redo size
       538818  bytes sent via SQL*Net to client
         7541  bytes received via SQL*Net from client
       645  SQL*Net roundtrips to/from client
         0  sorts (memory)
         0  sorts (disk)
         9656  rows processed
  

• How to display bookmarks on the desktop in a column

  I spent, I could show my favorites in a column on the left side of my homepage... And there was an icon to collapse or show the column. How to bring back this feature?

  {Ctrl + B} active / disable the bookmarks market bar / stop.

• When I open the display properties and click Desktop my options to browse is not even pop up again along when I try to change the theme of my computer freezes auto.

  My active desktop home page has been deleted . How I have difficulty or restore this problem?

  Hello DJ Zer0

  Try running the fix here.
  If it is useful or not I think that you should check for malware.
  Download and run Malwarebytes

  .