Disable or wiping "Cisco Configuration Professional Express."
Hello
We use a new Cisco1921-SEC/K9 comes with a new IOS (15.2 (4) M1). To use the feature of SSL - VPN from outside we activeted 'secure http server. I tried to check the security of the inside (we use ZBF) and it appeared a "Cisco Configuration Professional Express" Web page with Java "and so on" - brrr - who designed this thing?
Now us whant to disable or wiping the "Cisco Configuration Professional Express." Subtract the *.pkg and *.cfg flash with charging has not worked.
How can we remove this 'Cisco Configuration Professional Express', because we do not like ist! I can't find a flag to config or something in the flash...
Grüße
Steve
Steve,
You can follow the procedure in the CCP Admin Guide (here) for the withdrawal of CCP.
TL; DR.? Well (2 c seems to be specific to an AP installation):
To uninstall the Cisco CP Express Admin View of the router flash memory, perform the following steps:
Step 1 On the router, go to the directory in which Cisco CP Express Admin View files using this command:
router# cd flash:
Step 2 Use the delete command to remove all Cisco CP Express Admin display the files and folders of the router flash memory.
Note Ensure that you delete the files extracted from the ccpexpress27Admin.tar file and the ccpExpress_ap_express - security.shtml.gz.
a. remove the home.shtml file:
router# delete /force /recursive home.shtml
b. delete the ccpexp folder:
router# delete /force /recursive flash:ccpexp
c. remove the file ccpExpress_ap_express - security.shtml.gz in the folder ap802-xxxxx-xx.xxx-xxx.xxx/html/level/15/ of the AGP flash memory:
ap# delete flash:/ap802-ccw7-mx.124-25d.JAX/html/level/15/ccpExpress_ap_express-security.shtml.gz
Tags: Cisco Security
Similar Questions
-
Can Cisco Configuration Professional to use the IPS feature?
Dear Expert
Hello.
Could you tell me about Cisco Configuration Professional.
I would try the IOS - IPS on Cisco2901-SEC/K9.
I was looking to the ORC on Cisco Configuration Professional.
Cisco2901-SEC/K9 does not support SDM.
But the Cisco2901-SEC/K9 support the Cisco Configuration Professional.
Can you Cisco Configuration professional to use IPS as SDM function?
Kind regards
Takuro.
Hello
Yes, you can configure Cisco Configuration Professional IOS IPS.
CCP has a wizard to guide you through the process, there is a link for it:
I hope this helps you.
-------
Mashal
-
Cisco configuration professional
Hi I downloaded configuration cisco professional, but did not find any installer in the zip file I downloaded from cisco. Zip files included only html files.
I have read the information on the professional page of cisco configuration file I downloaded should be an installer for example: MSI or *.exe in my mind. Where is he?
Thank you
Kind regards
Totardo
Most likely, you have downloaded the 'express' package that is intended for installation on the device itself. the office installation package is known as 'pro' and the current version is 2.8.
Looking for the file name "cisco-config-pro-k9-pkg-2_8-en.zip".
It can be found here:
https://software.Cisco.com/download/release.html?mdfid=281795035&SOFTWAR...
-
Cisco Configuration Professional install and usage?
HI can someone help. I am studying for CCNA Security and want to install the CCP. I tried to download from cisco.com, file extensions are not supported, so I'm lost as to how to install it and play with the software. Based on Windows. Thank you
Make sure you download "cisco-config-pro-k9-pkg-2_6-en.zip". It is a zip file with the included Installer if just unzip and run the executable file.
Files with "exp" in the file names are the Express version for installation on routers and not intended for installation of PC.
-
Does anyone have a guide to the Cisco IPS Manager Express Administrator?
Hello.
Does anyone have a guide to the administrator of the Cisco IPS Manager Express?, I need to update my license some a procedure?, if I have an IPS with Bypass the configuration at the time of the closing of SPI interfaces will license update or will have no affection?
Thank you.
Here you will find guides - everything depends on your version:
For example, here is the 7.1 version SEO licenses:
Apply a license will not stop interfaces... However, if you apply an update of the signature, you'll stop traffic for a short time during the installation of the signatures up-to-date inspection.
Hope that helps.
-
How can I configure Outlook Express 6 to receive mail and my smart phone.
original title: Outlook Express
I recently bought a smart phone and set up the email.
Now, all the e-mail goes directly on my phone.
How to configure Outlook Express 6 to allow a copy of my mail to get to my phone and Outlook?
Please don't say Outlook and Outlook Express in the same sentence. They are completely different programs.
In OE: Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server. On your "smart" phone, you must do the equivalent.
OE or your smart phone, you want to check for delete after X days. Enough time to get the messages on both, but not exceed your space on your e-mail server.
Even if you have me say what kind of phone and which provider you use, I could not help you any further. If you don't see the option on your phone, call your support of wireless technology. You pay for it in your contract and they should be happy to help you.
-
How to configure outlook express for hotmail = Icannot sending spare part.
I had to have a laptop but have a problem with it. Hope someone can help.
I can send emails via hotmail, no problem. But when I try to send attachments the recipient receives an error message saying: could not read.
When I tried to configure hotmail/outlook, asked me for some program codes | don't have no or understand.
I'm a newbie to computer jargon. Please help if you can - many thanks.
Hi Malcolm,
1. What is the file format of the attachments that you send?
2. What is the exact error message when you try to configure Outlook Express with your Hotmail account?
3. are you having the same problem with other accounts?
4 program are. which codes you referring?
To open the attachments, the recipient must have the software file installed in the computer. Without the software, recipient may not be able to open the files.
To set up Outlook Express, I suggest you go through the following articles of the KB.
How to configure Outlook Express to use a Hotmail account
http://support.Microsoft.com/kb/220852
How to configure Outlook Express 6.0 for Internet mail
http://support.Microsoft.com/kb/171163
If the problem is only with Hotmail, then I suggest you to ask your question in the Forums of Hotmail.
-
How can I configure outlook express?
How can I configure outlook express.
How to configure Outlook Express: http://support.microsoft.com/kb/2409264
J W Stuart: http://www.pagestart.com
-
How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using only a single SMTP account?
In other words, I need to download via POP3 messages sent to the * address email is removed from the privacy *, * address email is removed from the privacy *, * address email is removed from the privacy * but I want to send messages using Mar SMTP service associated to * address email is removed from the privacy *
If I get a message like * address email is removed from the privacy * I want to answer as * address email is removed from the privacy *.
Is this possible?
How can I configure Outlook Express?
Concerning
Marius
You can do this if the Server SMTP allows you to send from a location that you are not connected via their internet service. So if you have this permission, go to tools | Accounts | Add mail. Then under the account of property | You want to set the server for incoming mail to the POP3 account, and then the SMTP protocol for the other account that you use to send servers. And then indicate whether or not the server requires authentication, and if yes, then you will need to put in the user name and password for the SMTP server it. Under properties. Advanced to define appropriate ports that may be different from the default value according to e-mail accounts. You can also check the "leave a copy of messages on the server" for accounts POP3, if you access messages from multiple computers.
Once you have an account set up, then you can set others upward in the same way, but change the POP3 properties for each while leaving the SMTP ones the same.
Once you have all that in place, you might want to backup things in case something goes wrong: www.oehelp.com/OETips.aspx#6
Steve
-
How to configure Outlook Express to work with Vodafone.it account?
original title: Vodafone.it
I can not Outlook Express to accept a connection with my account Vodafone.it.
Vodafone.it functions through gmail. I had no problem to configure my gmail/Outlook Express connection. Vodafone.it and gmail have not the same configuration values.
Help, ideas please... where mistaken?
Hello
I suggest you to contact Vodafone Support for Pop3 and SMTP configuration to configure Outlook Express.
You can also check the link mentioned to set up Outlook Express once you have the Pop3 and SMTP configuration below:
http://support.Microsoft.com/kb/2409264
I hope this helps.
-
I need to configure Outlook Express to send PDF files from scanned documents.
original title: I need to CONFIGURE OUTLOOK EXPRESS ON MY EMAILTO SEND OF SCAN of PDF DOCUMENTS[IE8] KODAK TECHNOLOGY SAID I SHOULD CONTACT MICROSOFT. WHEN I TRY TO SEND SCANNED PDFS, IT IS SAID: A FEW ERRORS HAVE OCCURRED WHILE THE REQUESTED TASKS - THE HOST HTTP PROCEDURE CANNOT FIND-CHECK YOU HAVE ENTERED SERVER NAME CORRECTLY TAKEN ERROR11001-ACCT HTTP - SERVER HTTP - PROTOCOL; SSL SECURE SMTP PORT 25-
All links on this page have been redirected to generic sites providing no benefit to the OE User:These links include the following pages:Control junk e-mail in Outlook Express (http://www.microsoft.com/windows/ie/community/columns/junkmail.mspx)Use Outlook or Outlook ExpressSet up Outlook ExpressSet up mail servers in Outlook ExpressCompose and send messages with Outlook ExpressCheck and print e-mail messages responding to theImport items into Outlook ExpressDownload attachments securely with Windows XP SP2Avoid file corruption in Outlook ExpressUse multiple e-mail addresses, multiple accounts and multiple identities in Outlook ExpressMake safer passwords in Outlook ExpressRepair Outlook ExpressGet the Oulook Express 10 albumsIt's a treasure trove of information for the user of the OE, especially page 'Avoid file corruption', which is extremely important for the user to know. But all these pages have disappeared to the beginning of the month.Emails sent to my Microsoft MVP leader remained.Steve -
I don't see the icon of mail in the Panel, I need this to configure outlook express help pls
I don't see the icon of mail in the Panel, I need this to configure outlook express help pls
Hello
1. are you referring to Windows mail or Outlook Express?
2 have you made changes on the computer before this problem?
3 What is a 32-bit or a 64-bit operating system?
Try the next method and check if it helps.
Method 1:
Step 1:
Change the setting from Control Panel and check if that helps.
a. Click Start, then select Control Panel
b. click on additional Options
c. Select view 32-bit Control Panel items and click on Mail and check if that helps.
Step 2:
Change the display panel and check if it helps
a. go to control panel,
b. click view classic iconsSee also:
http://Windows.Microsoft.com/en-us/Windows-Vista/where-is-Outlook-Express
-
How can I disable the automatic IP Configuration in Windows 7?
Is someone can you please tell me how to disable the automatic IP Configuration in Windows 7? I am happy to change the registry to implement if necessary.
Why?
Because my PC sometimes gives an IP address like 169.254.0.1. This is because Windows has detected that your computer is connected to a network, but the PC has not yet given an IP address by DHCP on the network, so Windows Server the automatic IP Configuration comes in and gives the PC an IP address that starts with 16.254.
The reason why that the DHCP server on the network has not given an IP address was because the network is coming a few seconds before the DHCP server comes up, and the automatic IP Configuration Windows comes too quickly.
Of course, once the PC has an IP starting 169.254, he cannot communicate with my router that has an IP address that starts with 192.168. The only cure, outside re-booting, is to issue the ipconfig/renew command to obtain an IP address from the router DHCP server.
If I can turn off the automatic IP Configuration of Windows (I could disable in XP) then I can avoid this error.
One option that you have.
You can set the IP address to a static IP address.
Reach:
Beginning
Control Panel
Network and Internet
Network and sharing CenterClick on connection to the Local network (a separate dialog box opens Local Area Connectin status)
Click on Properties (opens the dialog)
Click on Internet Protocol Version 4 (TCP/IPv4)
Click on PropertiesOn the general tab, move the radio button to use the following IP address:
Here you can set the IP address that you want to use the machine.Example of Configuration:
192.168.0.254
255.255.255.0
192.168.0.1You will need to note the IP DNS addresses you need more.
If you like you can even use a set of public DNS servers for free. http://www.online-tech-tips.com/cool-websites/free-DNS-server/Please note that the sample configuration assumes routers IP is 192.168.0.1, check please. :)
Good luck
-
Cisco 526 Wireless Express Mobility Controller supports AIR-LAP1140N?
Does anyone know if Cisco 526 Wireless Express Mobility Controller supports the AIP-LAP-1140N Access Points?
This isn't. The WLC526 supports only the AP521.
HTH,
Steve
-
Connection to the server would not check when you configure Outlook Express with Charter Web Mail
Hello! I call on my Outlook Express is installed on my Windows XP Professional. I need assistance with the configuration of Outlook Express with my Charter Web Mail. Charter, I called and they helped me with the setup but I'm stuck on the last part and it gave me an error on the server. The "connection to the server don't check not" and the Charter was not able to help me through, and they said it's a Microsoft Issue. I need some help here. Please help me! Thank you!
See here: http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=1241
There are step by step instructions.
Steve
Maybe you are looking for
-
I recently updated ios 10 on my iphone 5s, but I have problem with notification when my phone is locked, there is not a single message or notification social Messenger on my house, at the same time im already turn on notfication mid-week
-
How is it that after I put 41.0b1 as a 'update crucial"my youtube DVDVideoSoftware updated buttons are disabled?
-
my cursor moves only on long press arrow keys - how to get back to normal?
The normal configuration for my keyboard, it is that when I press an arrow key, the cursor moves in a single step. Something happened to my installation of Firefox as the cursor moves only if the key direction for a second or two. How to return this
-
Why as I get dialog boxes to enter my icloud Keychain password?
When I restart or unsleep my Mac, I have a series of dialog boxes asking my icloud Keychain password. I agree that none of the applicants programs are. For example, now requires "accountsd" - what is that? I can't cancel either out of it. NB: I'm not
-
Does not open in either safe mode. Courses in this loop. I don't have a boot disk. I ordered a year ago by Tiger Direct. An ASUS desktop PCs. Can you help me? Or do I need boot disk?