Disable the Apple TV Peer to Peer
Hey,.
I was wondering if anyone knew a way to ensure that my apple tv and ipad do not use Exchange. It seems to be the default, and I prefer not to use.
Thank you
David
They do not.
What makes you think they do, by default, or otherwise?
Tags: Apple TV
Similar Questions
-
How to disable the Apple Photos
How to disable the Apple Photos when importing photos (ambient light).
There are two ways:
1. When you connect your camera or your iPhone to your Mac and your Photos opens go to the import window and uncheck this box:
However, if you use a device with a memory card and reformat card Photos will think it's another camera and Photos will be open again.
2. to disable form opening automatically when any camera is attached permanently to Photos, iPhoto or Image Capture paste the command following in the Terminal window, followed by the return key or enter:
defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES
Change Yes to no reverse the order
-
disable the Apple Id and I have the storage cloud
Hello
2 months ago, I update my I cloud storage and I add my credit card to my phone I 5s
After a few days that I got fresh strangers I tunes and Google play I have ever bought.
so, I remove my credit card of my I phone and changed my password ID number and contact my CC company to get a new credit card.
yesterday, I discovered that my ID apple is disabled, and I can't update any application.
my questions are:
How can I release my apple ID?
How can I put my I cloud storage with out adding my number on my I phone credit card, because I don't want any more unknown costs?
Thank you
Michal
If your identifier Apple is disabled, it is another matter to do not be able to buy anything or to subscribe to the iCloud storage. Have you tried changinging your password to:
-
Restrictions on the IP VPN peer
Hi all
I hope that someone can help you.
I'm trying to restrict my ASA to meet the demands of the handshake any IP address outside the specified remote peer - I don't have a VPN between the HO and DC. So far I have removed the encryption card WATCH 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP I thought I would have responded to any request VPN. I also disabled the SSL VPN for good measure.
I have installed the certificates that I tried to get the rsa - sig, which was a failure - if you have a Watchguard on the other end originally do not try!
The ike-scan output that runs from an address different from the peer:
[email protected] / * /: ~ $ sudo ike-scan - v - M - trans = 5, 1, 2, 5 - id = test
*. *. *. * - showbackoff
[sudo] password for ubee:
WARNING: Specify a load of identification with the option - id or - n is not
no effect except if you also specify aggressive mode with - aggressive
or - A
DEBUG: pkt len = 84 bytes, bandwidth = 56000 bps, int = 16000 we from ike-scan 1.9 1 guests
*. *. *. * Hand Mode Handshake returned
HDR = (CKY - R = 17fa18bf79c4afa5)
ITS = (Enc = 3DES Hash = SHA1 Group = 5:modp1536 Auth = LifeType PSK = seconds
LifeDuration = 28800)
VID = 4048b7d56ebce88525e7de7f00d6c2d3c0000000 (IKE Fragmentation)
IKE Backoff Patterns:
IP address no. Recv Delta time
*. *. *. * 1 1310135704.612627 0.000000
*. *. *. * 2 1310135712.610471 7.997844
*. *. *. * 3 1310135720.615189 8.004718
*. *. *. * 4 1310135728.618697 8.003508
*. *. *. * Guess implementation: Cisco VPN concentrator
Ending ike-scan 1.9: 1 hosts scanned 84,077 seconds (0.01 hosts/sec). 1 handshake returned; 0 returned warn [email protected] / * /: ~ $
ASA debugs showing ike-scan request above:
6. July 8, 2011 | 09:08:30 | 302016 | 89.243.83.209 | 54971 | *. *. *. * | 500 | Connection disassembly UDP 9928544 for outside:89.243.83.209/54971 of identity: *. *. *. * / 500 duration 0:02:24 500 bytes
6. July 8, 2011 | 09:06:06 | 302015 | 89.243.83.209 | 54971 | *. *. *. * | 500 | Built connection UDP incoming 9928544 for outside:89.243.83.209/54971 (89.243.83.209/54971) to the identity: *. *. *. * / 500 (*. *. *. * / 500)
Thanks in advance.
Damo.
Hey Damo,
Assuming that you don't need to IKE to listen to the world, but only to specific counterparts, you can possibly use the access map command option, for example as follows:
test from the list of access permit udp host 10.48.67.145 interface outside isakmp eq
extended access list test deny udp any any eq isakmp
extended list permits all ip one access test
Access-group test in interface out-of-control plan
This will prevent other hosts to reach the IKE process:
% 4 ASA-106023: Deny udp src outside:10.48.67.144/500 dst identity:10.48.67.76/500 by access-group 'test' [0xe4b28725, 0 x 0]
You can learn more about this option on the following links:
http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/access_rules.html#wp1086468
http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/A1.html#wp1597389
HTH
Alain
-
How to disable the SOS on Apple Watch 2 function
How to disable the SOS on Apple Watch 2 function?
Hello
It is not currently possible to completely disable the SOS emergency feature.
However, to disable "hold to call auto":
- On your iPhone, in the application of the watch, go to: Watch My > General > emergency SOS - deactivate Hold to call self.
-
Impossible to disable the notification app on Apple Watch 2
Hello
I recently bought a new series of Apple Watch 2, which comes with the watch as 3 preinstalled OS. I know that all my notifications in instant messaging (whatsapp, wechat) have been reflected on my Apple Watch. I find too boring and I want to turn it off. I followed the instructions (go Apple Watch app on the iphone paired, then notifications, search for the application and then turn off 'iphone mirror'), but it did not work. Notifications will always appear on my watch for these two applications. The only way I can get rid of the notification is to change the style of alert iphone to "none" for both applications. But this way I get the banner on iphone or which is not acceptable.
So my question is:
- What is the settings "mirror iphone alerts" in the menu of notification of Apple Watch app supposed to do? He seems to have no effect at all?
- This notification of iphone mirror setting OS level control or that something must be supported by the application in order to have the effect? In other words, if it's a bug, is a watch OS bug or a bug in the application?
Thank you
Xinchao
Hi xinchao
After you disable the option for ' mirror iPhone alert of "for each application, it can be useful to restart your iPhone and your watch, both off together, and then restart your iPhone first:
-
My brother set a password on his iPhone, but I forgot what it was. Now we are locked and the screen tells us to connect to iTunes. We have never plugged this phone to a computer to synchronize with iTunes it and the sales associate at the store off to find my iPhone feature when the phone was transferred from my sister of my brother's number. We are uncertain of the apple that is associated with the phone ID and I'd love to know how we can go on unlock / reset.
"We are uncertain of the apple that is associated with the phone ID and I'd love to know how we can go on unlock / resetting.
The only way to restore the iPhone uses current Apple iD > If you forgot the password for your iPad, iPhone or iPod touch, or your device is disabled
-
disable the library access iCloud music on Apple TV 4
So I brought a brand new apple TV (4th generation). And I'm a little disappointed by some of the limitation. Why can't disable the library iCloud music on my apple TV? I still care for my family to have access to iTunes radio. But my library of music iCloud is a little personal. I can easily disable library iCloud music of my other devices. But not Apple TV? Why? In order to prevent access to my music, I completely disconnect from iTunes. It's very embarrassing. Does perform a work around?
You only need to log out once to turn it off, once you sign in you will need to then turn it back on so that it is visible.
-
Disable the automatic backup in Apple applications
How can I disable the automatic backup in the Script Editor and other Apple applications?
I love how the captain tells us what is good for us and allows us no easy way to change things.
AutoSave/Versions has been part of Mac OS X Lion. See these instructions. Save As will be in its normal position in all applications, and when you close the documents, you will be asked if you want to return (same result as the old do not save).
Versions and AutoSave will always run in background for the applications that use it. You can't really turn off without disrupting some application menus, but it's been at least OS X behave more like Snow Leopard or earlier version.
-
Validation of the IOS VPN peer identity IP with NAT - T
I just lost a lot of time to understand this behavior of the IOS. My conclusion reached: If you work with the good old peer identity address validation in profiles ISAKMP and the peer you are talking about is located behind a NAT, you must use the private IP address of the peer in the command "adapter address of the identity". I thought that NAT - T takes care of the translation in all sections of required configuration, but here especially, seems not so much. The interesting thing is that for all other orders, you must use the public IP address.
See the following example (showing only the relevant articles with statements by peer inside):
door-key crypto OUR_KEYRING
key pre-shared key address 1.2.3.4
Crypto isakmp PROFILE_NAME profile
VRF TEST
key ring OUR_KEYRING
function identity address 192.168.99.5 255.255.255.255
OUR_MAP 6 ipsec-isakmp crypto map
defined peer 1.2.3.4
the value of PROFILE_NAME isakmp-profile
Does anyone know if this is normal or if it is a bug? It would be useful and consistent if NAT - T changed the identity of the peer address during the phase 1 negotiation, then we would not deal with peer private addressing within site to site VPN configs. I also think of IP scenarios that overlap that may occur when you work with dealing with private peer.
See the release of relevant debugging in the attachment, after documenting a failed connection attempt (using the public, NATted IP of the peer in the command 'fit the address of identity') and once a following connection attempt (using the IP private, internal counterpart).
My router is a C2951 with IOS 15.3 (2) T2. The counterpart is an ASA (version & unknown config so far, but I'm sure that the other engineer did not indicate what it is using a private address in its config, despite my session from behind a NAT router, too).
Thank you & best regards
Toni
Toni,
Problem with identity is that it is an encrypted package (in Exchange MM) so cannot be changed in transit, so that a host may not know reliably it is the external IP address (it can make assumptions, but he doesn't know how long it is valid for).
Also if you "NAT 'd" identity you can't the difference between two devices behind same NAT/PAT on end of answering machine.
There are some implmentations IKE allowing IKE to identity type and value to specify manually. IOS not among them.
Yes decouple us identity and peer of the intellectual property, it adds flexability with a few corner cases which may arrise.
Yet another reason why NAT is evil?
M.
-
My iMac crashed and will not trigger upward. I bought a new IMack. There is no way I can I disable the Deluxe Suite CS3 on the machine 'dead '. My Apple notebook has been stolen and had the second CS3. I just can't disable and reactivate the CS3 on the new machine.
If you see an anomaly of counting activation, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.
-
The apple tv icon does not appear in the menu bar
The apple tv icon does not appear in the menu bar. I can't put my screen on my TV mirror.
Required to use AirPlay
If you go to the Apple menu > System Preferences, click on monitors and do not see the option to "See the mirroring of the options in the menu bar when it is available," your Mac does not meet these requirements.
Minimum requirements if your Mac and Apple TV are on the same network:
- Apple TV (2nd generation or later) with the latest version of the Apple TV software
- For mirroring of your screen to display your desktop, one of the following computers Mac with OS X Lion mountains v10.8 or later version:
Minimum requirements for peer-to-peer AirPlay, which allows visitors to quickly and easily connect their Mac or an iOS device to your Apple TV without getting the passwords and connection to the network Wi - Fi:
- Apple TV (3rd generation Rev A, model A1469 or later version) with the latest version of the Apple TV software
- Mac with OS X Yosemite v10.10 or later version (2012 or later)
-
How to disable the scaling software IPR and PPP compatible as Microsoft Office.
original title: scaling software IPR and PPP compatible as Microsoft Office.Hello!Does anyone know how to disable the scaling of the DPI (or how custom scale) in IPR software compatible?In particular, how can I disable display picture in "Microsoft Office 2010"?Disable in properties of control does not work as it does for non-Microsoft programs.I have a screen 1440 x 900, and for most of the tasks, I prefer the screen so it should be about 4' of me usually use scaling of IPR. The problem is that in MS Office, the Ribbon of the toolbar > 25% of the screen on this setting. Hide the Ribbon is an option, but if I could selectively disable scaling (as I do with the chrome) - all my problems could be solved.Thanks for the advice/input!RichThank you for your empty insulting response. I wonder if your answer is just an automated response.
Well, I was going to answer the Fahimulla K and politely point out that they may have misunderstood your question because you seem to have the "how-to" down to "Disable the display timing of high DPI settings" in the compatibility of most of the Programs tab. So say what you said apparently is that Microsoft Office 2010 programs do not seem to allow that (the selection isn't activated - grey - so you cannot select)- but you have decided to go in a different direction (more rude/crude) before I got the chance.
It will not win you a favor here - it is above all a forum for peer-to-peer (user to user). Politeness a bit for the people spend their time (and as far as I know - the real Employees from Microsoft that poster here do still their choice, not obligation) goes a long way. A little profanity goes even further - but not in the desired direction. * smile *.
However, I had planned on looking into this because he was intrigued, so despite the generally rude responses by you in the two posts, I found you so far - I'll post the results of my research (and my job steps) here in case it might be useful to someone. I'll probably respond to the other post and a link to this post as well.
At this stage, while having access to several computers, some with Office 2007 again and others with Office 2010 32 bit, I had not found the time to test and see if it is linked to all Office 2010 64-bit or not. I confirmed that this setting does not seem to be available in Windows 7 (64 bit) for individual products Microsoft Office 2010 (64-bit versions.)
An interesting thing I found in the Microsoft Knowledge Base has been "scale of the graphical object Microsoft Graph is reduced inside the bounding box when you insert it into a workbook in Excel" where they actually change you the setting in the Task Manager process tab-->. This doesn't seem to work (not yet available) for common products (Word, Excel, etc.) as he says he does it to the CHART. EXE.
So by doing research and without more information from you (such as possibly critical details that you probably have Windows 7 64-bit and 64-bit Microsoft Office 2010) and tests on one machine 64-bit Windows 7 but 32-bit Office 2010 - I note the checkboxes in the compatibility settings are available. I first thought about this possibility when I noticed a part of this article:
http://www.SevenForums.com/tutorials/316-compatibility-mode.html
... when they say, ' "NOTE: If the compatibility options are grayed out, then it is a 64-bit program and cannot be changed.".So - I would say the second part of the answer of the Fahimulla K would be a great place to start (and you did, looking at this post from you in the forums Microsoft Office... about a minute after the display of it here.)
I think that you maybe isn't luck if - * if * you run the 64-bit version of Office 2010 that is. Even Microsoft (for a long time - maybe still) recommended and installed Office 2010 32-bit default products.
- http://social.technet.Microsoft.com/forums/en/Office2010/thread/40d17c38-90e0-48D9-8F83-d9721a24b063
- http://Office.Microsoft.com/en-us/Word-help/choose-the-32-bit-or-64-bit-version-of-Microsoft-Office-HA010369476.aspx
Not for the reason will be addressed during the conversation; even though it is an interesting puzzle and would not be limited to just Microsoft Office - but any 64-bit application, you can install. Their idea was that in general there is some 64-bit plugins and same problem with 32-bit plugins that existed / exist for Microsoft Office.
My suggestion, if my hypothesis about what architecture of Microsoft Office that you have installed is correct, would be to uninstall Microsoft Office 2010 64 bit and install Microsoft Office 2010 32-bit.
Hope that helps someone.
-
The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.
Depending on what you mean by "voice command", either:
Settings / general / accessibility / VoiceOver / OFF, or
Settings / Siri / OFF
As for your use of the battery, you can check what app pulls most of its use in the settings / battery. A new version of the app is sometimes problematic, not necessarily iOS or iPhone. If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes. If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:
Restore your iPhone, iPad or iPod touch from a backup - Apple Support
-
RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.
You can not. However, I'm not sure why you think it's a privacy or security threat. The only thing that can be accessed without unlocking the phone is the camera to take pictures. No one can access your data already on the phone.
You can send feedback to Apple here:
Maybe you are looking for
-
Laptop Dock trackpad stops working intermittently, everyone
The trackpad stops intermittently and it does not appear to be linked to a particular application or action. Closing and reopening of the laptop lid (screen) seem to fix, but I'd rather the cause. Does anyone else know this?
-
With the Matlab DAQ Toolbox, it is possible to export a scanclock by addClockConnection() (see http://www.mathworks.de/de/help/daq/ref/daq.session.addclockconnection.html for an example of code base). However, I found no information on properties sig
-
Aspire V3-551-webcam not found-
Hello, I just had to install a new haddrive and once I installed win 7 x 64, I found that my aspire V3-551 was not recognize my Web camera. If someone could help me to point me in the right direction would be greatly appricated. Thanks in advance
-
Public folder of Windows Vista sharing problem. Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged
-
HOWTO get rid of the point 'Libraries' of the taskbar?
Hello I suddenly had an item in the taskbar, which is an icon of small flder with the word 'Libraries' next to it on the right. I don't want it in my taskbar, can you be it someone please let me know how to remove it? Thank you Boo