disable the cisco ASA connection using only activate password via asdm

Hi all

How to disable the connection to my cisco asa 5520 using only activate password via asdm? I like to asdm connection using the user name and password. TIA!

The command:

 aaa authentication http console LOCAL

.. .will be force users accessing to ASDM (which uses transport http (s)) to be authenticated on the LOCAL database.

You can also specify another list of defined authentication method, such as RADIUS, RADIUS or AD. (Although t wew love to leave a LOCAL method on the spot, in which case your external authentication server is not available.)

Tags: Cisco Security

Similar Questions

  • Completely disable the Cisco ASA threat detection

    Hi all

    On a Cisco ASA5510, Version 8.2 (1) with ADSM v. 6.2 (1) we have this threat detection because we like to allow all traffic through at this time:

    Wouldn't be fair to assume that this setting blocks any traffic that might normally be considered to be a threat? We assume that the setting 'Enable parsing' verified by himself just analyze traffic but takes no action.

    Yes you are right. Not all IP block until you have the keyword "flee".

    Thank you and best regards,

    Maryse Amrodia

  • Unable to connect to the Cisco VPN you use native client: El Capitan

    I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

    When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

    * connect using the old work VPN connection: without success

    Config: Hand [server address, account name],

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    ...

    * Add new VPN connection using L2TP over IPSec: without success

    Config: Hand [server address, account name],

    Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

    Advanced [send all traffic on the VPN = TRUE]

    errsors:

    "pppd [2616]: password not found in the system keychain.

    "authd [124]: copy_rights: _server_authorize failed.

    ...


    * Add new connection using Cisco via IPSec VPN: without success

    Main config: [server address, account name].

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

    I. Journal of Console app existing/Legacy VPN connection:

    26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

    26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 405 [2580]: connection.

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

    [26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

    26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

    26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    [26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    $VPN_SERVER_IP

    II. new VPN connection using L2TP over IPSec Console app log:

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

    26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

    26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

    26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

    26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

    26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

    26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

    26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

    III. New connection of Cisco VPN through IPSec Console app log:

    26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

    26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 296 [2576]: connection.

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: connection.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

    [26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

    26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

    26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    [26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    It seems that I solved the problem, but I'm not sure it helped.

    After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

  • Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

    I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

    Hello

    Open the control panel-> mouse. There should be an option to disable the touchpad.

    Good bye

  • How can I disable the e-mail address 'members only area Details "?

    How can I disable the email address of 'Member only area Details' I get when registering for access to the secure area? I remember, it was something that I put in the HTML code of the form itself, but I can't find this information in the knowledge base now.

    Hello

    You can disable email notification that is sent to the person submitting the web form by adding the SAR = false to the method of action of the form. Note that this will disable all the autorepliers for the form.

    For example...

    WebFormID=40420&OID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID ={module_cid}&SAR=false" enctype="multipart/form-data" onsubmit="return checkWholeForm45998(this)" method="post" name="catwebformform45998">

    I hope this helps!

    -Sidney

  • Z10 blackBerry a way to disable the bluetooth handset and use activate streaming audio only?

    I use bluetooth in my car to make or receive phone calls and it only allows you to stream Pandora.  On my previous BBs, I was able to disable the handset function and just use streaming, but I'm not find similar options on the Z10.  Does anyone know how to do this? Right now I just turn off my stereo when I receive a call, but this isn't a good solution.  Thanks for any comments.

    Hello oumiahamada and welcome to the community of BlackBerry Support Forums.

    Thank you for your question about Bluetooth.

    The Z10 BlackBerry doesn't have the option to edit what services are allowed with a Bluetooth connection.

    Depending on your vehicle, you will need to access your Bluetooth set up or the settings in the dashboard of your car to control what features are Bluetooth-enabled.

    If you don't know how to access these settings, contact your dealer or see your owner's manual.

    See you soon!

  • How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

    Hi team

    Hope you do well. !!!

    currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

    1 users will connect: user advanced browser on SSL VPN pop past username and password.

    2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

    3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

    4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

    This is my requirement, so someone please guide me how to set up step by step.

    1. how to set up the Radius Server?

    2. how to configure CISCO ASA?

    Thanks in advance.

    Hey Chick,

    Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

    http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

    Hope this helps

    Knockaert

  • Cisco ASA, connect an IP address on the OUTSIDE of the VPN remote access

    Hello

    I tried to find resources on the net but could not find a solution, then post it here. Maybe someone can help.

    So the problem is that I'm trying to access a server on the cloud for remote VPN access (cisco asa 5510).

    The server on the cloud (54.54.54.54) is only accessible from the outside interface (192.168.11.2) NY Firewall (cisco asa 5510)

    I added some ACE for this in the ACL of VPN tunnel to divide.

    NY-standard host allowed fw # access - list vpn_remote-customer 54.54.54.54

    And I see the road added to my cliet machine after the VPN connection, but still it cannot connect to this server.

    The network INTERIOR, I can connect to the server.

    Thanks in advance.

    Hello

    This is most likely a problem with NAT hair/U-turn hairpin.

    Will need to see the configurations or you would need to check yourself

    I don't know what your version of the Software ASA is to be like who determines what is the format of NAT configuration.

    So far, you have confirmed that the ASA VPN configuration provides the VPN Client with the route to the remote server. Then in circulation should be tunnel to the ASA.

    Then, you will need to check the output of this command

    See the race same-security-traffic

    You should see the command in the output below

    permit same-security-traffic intra-interface

    If you do not, you will need to add it. This effect of controls is to allow traffic to enter an interface and exit through the same interface. In your case this applies to Internet VPN Client traffic to the remote server as it between ' outside ' and spell through the 'outside'.

    Then, should ensure that dynamic PAT is configured for the VPN Clients.

    8.2 software (and below)

    You most likely have a dynamic configuration PAT like that on the firewall, if levels of above running software version

    Global 1 interface (outside)

    NAT (inside) 1 0.0.0.0 0.0.0.0

    In this situation if we wanted to add dynamic PAT for a pool of VPN, we would add

    NAT (outside) 1

    This would allow users to use the same public IP address as LAN users, when accessing the remote VPN server

    Software 8.3 (and above)

    Because the NAT configuration format is completely different in the latest software, you could probably just add a new configuration of NAT completely without adding a

    network of the VPN-PAT object

    subnet

    dynamic NAT interface (outdoors, outdoor)

    Of course, its possible that there could be some configuration NAT already on the device which could cause problems for this configuration. If this does not work then that we would have to look at the actual configurations on the ASA.

    Hope this helps

    Let me know how it goes

    -Jouni

  • How can I disable the warning "this connection is not approved", which appears almost each time I try to go to a Web page via Firefox? I use 10 64-bit Windows.

    I just upgraded to 10 64-bit Windows. The version of Firefox that works now on this OS regularly displays a blocking window that told me that "this connection is not approved" when I try to connect to a third-party site. A screenshot of the window copy is attached. How to disable this warning? I can't continue to use Firefox if I can't find the 'off' switch, which so far has escaped me.

    Yes, this is the feature, and it is lit.

    How it works, is that ESET intercepts all your browser connections to filter the content. If it is an HTTP connection, it is transparent. For an HTTPS connection, ESET must present a certificate of 'false' for Firefox site so it can be the "man in the middle" and decipher and read the answer (otherwise, it's gibberish, of course).

    ESET is supposed to insert his signature certificate in both the Windows certificate store (used by IE and Chrome) separated from Firefox AND the browser certificate store accepts the false certificates. But it does not always work. In this case, you can import the certificate manually in Firefox. If all goes well, which has been covered in the manual, but otherwise it's basically along these lines:

    (1) search or save a copy of the ESET signature certificate (it is a file in DER format that usually has the .cer extension). Is your second screen shot what appears when you click View Certificate? Try this:

    • Click the Details tab, click the button "Copy to File. This will start the Export Wizard.
    • In the wizard, choose the DER format and save in a suitable location (for example, your Documents folder).

    (2) import the file into Firefox as follows:

    • In Firefox, open the Certificate Manager to:
      "3-bar" menu button (or tools) > Options > advanced > mini-onglet Certificates > "view certificates" button.
    • Click on mini - the References tab, then on the 'Import' button and find the DER file. Note: I suggest allowing the certificate for websites only.

    I have attached a few screenshots of reference sample.

  • I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to disable the other computer without using this computer?

    I need to disable my Creative Suite license on another computer in order to activate it on a new computer, but the old computer crashed and I can't use it. Is it possible to deactivate the license on the old computer without using it?

    you are allowed two facilities, activations, you should may not disable before activating on your new computer.

    But if you don't, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html.  Ask a county of activation reset.

  • "The service cannot be started, either because it is disabled or it has no active device is associated."-message I get what anyone who use only request password

    I had problems with my computer and trying to understand what was going on... I changed file permissions and how some

    the services are started.  Now I can't do anything. ..... This allows for standard user password. Now he is not even asking me password more. It just does nothing. Same thing if I try to run as administrator, nothing happens now. Even when I'm with a Director profile I can't do anything that would require only a password before.
              
    I get this message instead: "could not start the service, either because it is disabled or it has no enabled devices associated."
    I'm locked out can do whatever it is administrative. If anyone could offer any suggestions, I would really appreciate this has been driving me crazy.

    Thank you, Scott.

    Hi Scott,.

    1. is it impossible to run any program?

    2 - is the only message you receive?

    3. which files do you have change permissions?

    4. remember the services for which you have made changes?

    5. what questions initially face?

    This problem may occur if the service is disabled. To resolve this issue, try the following.

    Method 1: Search for services.

    a. click Start type services.msc and press ENTER.

    b. double-click the service that is not started.

    c. click the log .

    d. check that the service has not been disabled.

    e. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to start when you start the computer.

    Method 2: Perform a system restore if you have made any changes recently. Refer to the following.

    What is system restore?

    System Restore: frequently asked questions

  • A possible bug related to the Cisco ASA "show access-list"?

    We had a strange problem in our configuration of ASA.

    In the "show running-config:

    Inside_access_in access-list CM000067 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:http_access

    Inside_access_in access-list CM000458 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:https_access

    Note to inside_access_in to access test 11111111111111111111111111 EXP:1/16/2014 OWN list: IT_Security BZU:Network_Security

    access-list extended inside_access_in permit tcp host 1.1.1.1 host 192.168.20.86 eq 81 Journal

    access-list inside_access_in note CM000260 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - dgm

    access-list inside_access_in note CM006598 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - ns

    access-list inside_access_in note CM000220 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - ssn

    access-list inside_access_in note CM000223 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:tcp / 445

    inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 any eq www log

    inside_access_in allowed extended access list tcp 172.31.254.0 255.255.255.0 any https eq connect

    inside_access_in list extended access permit udp 172.31.254.0 255.255.255.0 any eq netbios-dgm log

    inside_access_in list extended access permit udp 172.31.254.0 255.255.255.0 connect any eq netbios-ns

    inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 any eq netbios-ssn log

    inside_access_in list extended access permitted tcp 172.31.254.0 connect any EQ 445 255.255.255.0

    Inside_access_in access-list CM000280 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:domain

    inside_access_in list extended access permitted tcp object 172.31.254.2 any newspaper domain eq

    inside_access_in list extended access permitted udp object 172.31.254.2 any newspaper domain eq

    Inside_access_in access-list CM000220 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:catch_all

    inside_access_in list extended access permitted ip object 172.31.254.2 any newspaper

    Inside_access_in access-list CM0000086 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:SSH_internal

    inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 interface inside the eq ssh log

    Inside_access_in access-list CM0000011 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

    inside_access_in list extended access allow object TCPPortRange 172.31.254.0 255.255.255.0 host log 192.168.20.91

    Inside_access_in access-list CM0000012 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:FTP

    access-list extended inside_access_in permitted tcp object inside_range 1024 45000 192.168.20.91 host range eq ftp log

    Inside_access_in access-list CM0000088 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

    inside_access_in access list extended ip 192.168.20.0 255.255.255.0 allow no matter what paper

    Inside_access_in access-list CM0000014 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:DropIP

    inside_access_in list extended access permitted ip object windowsusageVM any newspaper

    inside_access_in list of allowed ip extended access any object testCSM

    inside_access_in access list extended ip 172.31.254.0 255.255.255.0 allow no matter what paper

    Inside_access_in access-list CM0000065 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:IP

    inside_access_in list extended access permit ip host 172.31.254.2 any log

    Inside_access_in access-list CM0000658 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security

    inside_access_in list extended access permit tcp host 192.168.20.95 any log eq www

    In the "show access-list":

    access-list inside_access_in line 1 comment CM000067 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:http_access

    access-list inside_access_in line 2 Note CM000458 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:https_access

    Line note 3 access-list inside_access_in test 11111111111111111111111111 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security

    4 extended access-list inside_access_in line allowed tcp host 1.1.1.1 host 192.168.20.86 eq newsletter interval 300 (hitcnt = 0) 81 0x0a 3bacc1

    line access list 5 Note CM000260 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - dgm

    line access list 6 Note CM006598 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - ns

    line access list 7 Note CM000220 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - ssn

    line access list 8 Note CM000223 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:tcp / 445

    allowed to Access-list inside_access_in line 9 extended tcp 172.31.254.0 255.255.255.0 any interval information eq www journal 300 (hitcnt = 0) 0 x 06 85254 has

    allowed to Access-list inside_access_in 10 line extended tcp 172.31.254.0 255.255.255.0 any https eq log of information interval 300 (hitcnt = 0) 0 x7e7ca5a7

    allowed for line access list 11 extended udp 172.31.254.0 inside_access_in 255.255.255.0 any netbios-dgm eq log of information interval 300 (hitcn t = 0) 0x02a111af

    allowed to Access-list inside_access_in line 12 extended udp 172.31.254.0 255.255.255.0 any netbios-ns eq log of information interval 300 (hitcnt = 0) 0 x 19244261

    allowed for line access list 13 extended tcp 172.31.254.0 inside_access_in 255.255.255.0 any netbios-ssn eq log of information interval 300 (hitcn t = 0) 0x0dbff051

    allowed to Access-list inside_access_in line 14 extended tcp 172.31.254.0 255.255.255.0 no matter what eq 445 300 (hitcnt = 0) registration information interval 0 x 7 b798b0e

    access-list inside_access_in 15 Note CM000280 EXP:1/16/2014 OWN line: IT_Security BZU:Network_Security JST:domain

    allowed to Access-list inside_access_in line 16 extended tcp object 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 0x6c416 81 b

    allowed to Access-list inside_access_in line 16 extended host tcp 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 0x6c416 81 b

    allowed to Access-list inside_access_in line 17 extended udp object 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 227 0xc53bf

    allowed to Access-list inside_access_in line 17 extended udp host 172.31.254.2 all interval information journal field eq 300 (hitcnt = 0) 227 0xc53bf

    access-list inside_access_in 18 Note CM000220 EXP:1/16/2014 OWN line: IT_Security BZU:Network_Security JST:catch_all

    allowed to Access-list inside_access_in line 19 scope ip object 172.31.254.2 no matter what information recording interval 300 (hitcnt = 0) 0xd063707c

    allowed to Access-list inside_access_in line 19 scope ip host 172.31.254.2 any which information recording interval 300 (hitcnt = 0) 0xd063707c

    access-list inside_access_in line 20 note CM0000086 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:SSH_internal

    permit for line access list extended 21 tcp 172.31.254.0 inside_access_in 255.255.255.0 interface inside the eq ssh information recording interval 300 (hitcnt = 0) 0x4951b794

    access-list inside_access_in line 22 NOTE CM0000011 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:PortRange

    permit for access list 23 inside_access_in line scope object TCPPortRange 172.31.254.0 255.255.255.0 192.168.20.91 host registration information interval 300 (hitcnt = 0) 0x441e6d68

    allowed for line access list 23 extended tcp 172.31.254.0 inside_access_in 255.255.255.0 192.168.20.91 host range ftp smtp log information interval 300 (hitcnt = 0) 0x441e6d68

    access-list inside_access_in line 24 Note CM0000012 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:FTP

    25 extended access-list inside_access_in line allowed tcp object inside_range Beach 1024 45000 host 192.168.20.91 eq ftp interval 300 0xe848acd5 newsletter

    allowed for access list 25 extended range tcp 12.89.235.2 inside_access_in line 12.89.235.5 range 1024 45000 host 192.168.20.91 eq ftp interval 300 (hitcnt = 0) newsletter 0xe848acd5

    permit for access list 26 inside_access_in line scope ip 192.168.20.0 255.255.255.0 no interval 300 (hitcnt = 0) newsletter 0xb6c1be37

    access-list inside_access_in line 27 Note CM0000014 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:DropIP

    allowed to Access-list inside_access_in line 28 scope ip object windowsusageVM no matter what information recording interval 300 (hitcnt = 0) 0 x 22170368

    allowed to Access-list inside_access_in line 28 scope ip host 172.31.254.250 any which information recording interval 300 (hitcnt = 0) 0 x 22170368

    allowed to Access-list inside_access_in line 29 scope ip testCSM any object (hitcnt = 0) 0xa3fcb334

    allowed to Access-list inside_access_in line 29 scope ip any host 255.255.255.255 (hitcnt = 0) 0xa3fcb334

    permit for access list 30 inside_access_in line scope ip 172.31.254.0 255.255.255.0 no interval 300 (hitcnt = 0) newsletter 0xe361b6ed

    access-list inside_access_in line 31 Note CM0000065 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:IP

    allowed to Access-list inside_access_in line 32 scope ip host 172.31.254.2 any which information recording interval 300 (hitcnt = 0) 0xed7670e1

    access-list inside_access_in line 33 note CM0000658 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security

    allowed to Access-list inside_access_in line 34 extended host tcp 192.168.20.95 any interval information eq www 300 newspapers (hitcnt = 0) 0x8d07d70b

    There is a comment in the running configuration: (line 26)

    Inside_access_in access-list CM0000088 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

    This comment is missing in 'display the access-list '. In the access list, for all lines after this comment, the line number is more correct. This poses problems when trying to use the line number to insert a new rule.

    Everyone knows about this problem before? Is this a known issue? I am happy to provide more information if necessary.

    Thanks in advance.

    See the version:

    Cisco Adaptive Security Appliance Software Version 4,0000 1

    Version 7.1 Device Manager (3)

    Updated Friday, June 14, 12 and 11:20 by manufacturers

    System image file is "disk0: / asa844-1 - k8.bin.

    The configuration file to the startup was "startup-config '.

    fmciscoasa up to 1 hour 56 minutes

    Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor

    Internal ATA Compact Flash, 128 MB

    BIOS Flash M50FW016 @ 0xfff00000, 2048KB

    Hardware encryption device: Cisco ASA-5505 Accelerator Board (revision 0 x 0)

    Start firmware: CN1000-MC-BOOT - 2.00

    SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

    Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.06

    Number of Accelerators: 1

    Could be linked to the following bug:

    CSCtq12090: ACL note line is missing when the object range is set to ACL

    The 8.4 fixed (6), so update to a newer version and observe again.

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • the Cisco asa vpn processing error payload: payload ID: 1

    Hello

    I set up vpn L2TP by using ASDM and now I am not able to connect my Cisco ASA 5505.

    It is showing the error message

    3 July 7, 2011 18:57:38 IP = *. *. *. *, payload processing error: ID payload: 1

    Please suggest me how to solve this problem (by using ASDM)

    Thank you

    Hi Nikhil,

    Your config seems incomplete, command 'IPSec l2tp ipsec vpn-tunnel-Protocol' is missing, what is needed to connect L2tp try to reconfigure your firewall using the link:-

    http://www.Cisco.com/en/us/customer/docs/security/ASA/asa80/configuration/guide/l2tp_ips.html

    Hope this helps,

    Parminder Sian

  • AAA to circumvent the password to enable on the Cisco ASA

    Hi all. I'm having a problem where I get authenticated by the AAA server, but after authentication, that I am placed in user mode. AAA admin (I have no access to the AAA server) told me that he had all the users configured with priv level 15, which will lead them directly in the mode privilege on routers.

    My question is how can I configure my Cisco ASA to get around using a password to enable. See below the configuration of my

    AAA-server protocol Ganymede MYGROUP +.
    Max - a failed attempts 4
    AAA-server host 2.2.2.2 MYGROUP (inside)
    timeout 3
    key *.
    Console Telnet AAA authentication LOCAL MYGROUP
    Console to enable AAA authentication LOCAL MYGROUP
    privilege MYGROUP 15 AAA accounting command

    Looks like you want to directly access the exec privileges mode. This feature is not supported by the ASA. This is only possible on IOS devices.

    Rgds, jousset

    Note the useful questions.

  • SSLv3 disable on Cisco ASA 5505

    Hello friends,

    Because of the vulnerability of sslv3. I would like to disable sslv3 on ASA 5505. you please help me to do so. Second, I would like to know how the option field X can set up on it.

    We use the web VPN on ASA 5505 firewall running IOS 8.2.3.

    Thank you..

    You must enable TLS only:

    ASA (config) # ssl version tlsv1 only client

Maybe you are looking for

  • Low Volume

    Recently bought a 3rd gen Apple TV which is connected the HDMI3 on my Samsung TV.  When I watch anything through Apple TV, Netflix etc, I need to increase the TV volume up to MAX to hear anything.  How can I fix?

  • Satellite M40 - noise of harman kardon speakers

    Dear all, My laptop * M 40 harmon /kardon spekaer give sound like crackle * once a certain time-especially if you are using Windows Media player.(1) some time, just attaching of tape on the surface of the speaker gives the noise.(2) I've disabled the

  • HP Mini 110-1030NR: password power

    My brother password protected the boot CNU9214KPX

  • Get visa error 1073807194 after the power of the instrument cycle

    Hello and thanks in advance, I connect to an instrument via VISA with the port and IP address of the device. Normally, this works well, but if the loss of instrument (and camp) power during execution of the VI, LabView must be restarted for the VI to

  • Cannot install C4780 printer on Mac

    I'm trying to install my new printer Photosmart C4780 on my MacBook Pro, OX 10.6.  I downloaded the software for this version of Mac OS X (the CD has no support for 10.6).  At the beginning of the installation, I wonder for the device to install - bu