Unable to connect to the Cisco VPN you use native client: El Capitan

I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

* connect using the old work VPN connection: without success

Config: Hand [server address, account name],

AUTH settings [shared secret, the Group name].

Advanced [mode to use the passive FTP = TRUE]

errors:

"authd [124]: copy_rights: _server_authorize failed.

"raccoon [2580]: could not send message vpn_control: Broken pipe"

...

* Add new VPN connection using L2TP over IPSec: without success

Config: Hand [server address, account name],

Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

Advanced [send all traffic on the VPN = TRUE]

errsors:

"pppd [2616]: password not found in the system keychain.

"authd [124]: copy_rights: _server_authorize failed.

...


* Add new connection using Cisco via IPSec VPN: without success

Main config: [server address, account name].

AUTH settings [shared secret, the Group name].

Advanced [mode to use the passive FTP = TRUE]

errors:

"authd [124]: copy_rights: _server_authorize failed.

"raccoon [2580]: could not send message vpn_control: Broken pipe"

VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

I. Journal of Console app existing/Legacy VPN connection:

26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 339 [2580]: connection.

26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 405 [2580]: connection.

26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

[26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

[26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

$VPN_SERVER_IP

II. new VPN connection using L2TP over IPSec Console app log:

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

III. New connection of Cisco VPN through IPSec Console app log:

26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 296 [2576]: connection.

26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

26/03/16 10:19:56, 374 raccoon [2576]: connection.

26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

[26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

[26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

It seems that I solved the problem, but I'm not sure it helped.

After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

Tags: Mac OS & System Software

Similar Questions

  • Unable to connect via the Cisco VPN Client

    Hello

    I have configured remote access VPN to ASA and tries to connect via the Cisco VPN Client 5.0

    I am not able to connect and watch the journal on the SAA

    ASA-3-713902: Group = xxxxx, IP = x.x.x.x, withdrawal homologous peer table is placed, no match!

    ASA-4-713903: Group = xxxxx, IP x.x.x.x, error: impossible to rmeove PeerTblEntry

    ASA does not support the K9 i.e. VPN - DES is enabled and VPN-3DES-AES is disabled.

    What could be the reason.

    Concerning

    Hi, I had this same problem, here is the solution:

    When you perform a debug crypto isakmp 255, so you see that the cisco vpn client does not support SHA +, you must use MD5 + AN or sha with 3DES/AES.

    Be careful, this debugging is very talkative, but that's the only way I found to get ITS proposal on debugging.

    Well, change your strategy using MD5 isakmp / OF would do the trick.

  • Unable to connect to the Cisco VPN using the branch line

    Hello

    We use Cisco VPN Client 5.0.07.0290 to connect to our servers. We have a Sonicwall NSA2400 FW and we have 2 ISPS. We have configured load balancing on firewalls in mode 'Spill-Over '.

    So whenever the 1st line is on full charge, it will automatically moves users on the 2nd line.

    The problem that we face here is the users who get 1st line ISP, they can easily connect to the client VPN Cisco IP, but the users who receive the IP of the 2nd line of the ISP, they are not able to connect to the Cisco VPN Client. It's really annoying because everyone should be able to connect.

    It will be really great if someone can help me as well.

    Thank you

    PS: If Exchange us the line of Sonicwall haapens scenario of Vice versa as mentioned above.

    Hello Sam,.

    Correct me if I help you,.

    In your network that is inside the firewall, you are trying to connect to Cisco VPn client resides outside your network/Public network.

    If the above is the question.

    Please check the routes and roads of sonicwall priority.

    example:

    Isps1: the value of the metric as 1 for traffic destined for cisco VPn IP of the gateway and specify to leave traffic isps1 interface

    ISP2: set the metric 1 once again for the traffic to cisco VPn IP of the gateway and specify to leave traffic ISP2 interface

    interface metric 1 source destination

    Kindly, please note the useful messages and.

    Thank you

    Srikanth

  • Unable to connect to the network when you use Internet Explorer, applications and games

    Hello!

    Problem in brief:

    Type of access network and sharing Center: Internet

    Ping works successfully for any Address.ex IP: 192.168.1.1 & google.com & any other website

    Local network access works well! I can access other computers files copy, paste, etc.

    PROBLEM: any application(games,TeamViewer,steam,viber,etc.) who want to get in touch with Internet: crash, no answer or does not even! web browsers does not open any Web site doesn't even open configuration page of the router (192.168.1.1)

    Tried:

    -Safe Mode

    -cleaning of all viruses (via ESET)

    -using the LAN cable

    -Captive connectivity via my phone (with or without USB cable)

    -disable antivirus

    -Start windows in diagnostic startup mode!

    -disable certain features or services

    -VMvare (she even is not run just give me an error and close)

    -using the windows key repair via the Installation of Win7 disc (he says run in windows and when I tried it gave an error that I don't remember what it was exactly, but I think it was said cannot get information on my disks!)

    n ' any browser (IE, Firefox, Google Chrome) with all the network settings

    AND without success! :(

    OK I think I wrote all the things on my laptop problem! (MSI GX780)

    It was the memory of what is my problem!

    _________________________________________________________________

    3 days ago, I went to college with my laptop out my usb flash uni compuer teacher and put in to my laptop computer and copied something and put new to United compuer. and when I have returned home and started my internet windows problem happened!

    all the computers in our University defected virus! but I've used these before computers (flash drive, etc.) but just a regular virus get own by my antivirus!

    so I tried a lot of things that I mentioned above! but without success :(

    all other devices in the House are OK! Desktop computer, Sony laptop, 2 Android phones

    for example when I run NFS mostwanted (2005), Counter Strike Condition zero & any other application that does not use Internet well run! but when run NFS Rivals, Mostwanted (new one) run but breaks down when they come into contact with internet (I play in solo mode)!

    Viber, gives me an error by not answering!

    VMware gives me error and close!

    Photoshop the same as VMware (but internal application error)!

    PLeaseeeeeeeeeee help someone!

    Original title: weird [SOLVED] Internet connectivity problem

    PROBLEM SOLVED! :)
    Solution:
    just type in the command prompt:
    netsh
    Winsock
    reset
    => and the magic happened and save my life

    Thanks to: http://www.tomshardware.com/answers/id-1735863/ping-browse.html#13989812

  • You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

    Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

    Karima,

    Applicable to Windows 7.

    The following steps require administrator credentials.

    • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
    • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

    Good luck.

    James

  • can not connect because the logon method, you use is not allowed on this computer.

    I have a new computer that is joined to the domain, but in trying to have a user login, I get the following error:

    can not connect because the logon method, you use is not allowed on this computer.

    The only way for him to connect is to change its parameters from the user to the administrator. I tried power users and other options and did not work.

    is there any solution for this?

    Hi Snidera,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

    It will be useful.

  • What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

    What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

    Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

    I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.

  • Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

    Hello

    I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

    I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

    Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

    Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
    Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

    The router configuration

    IKE policy

    VPN strategy

    Client configuration

    Hôte : < router="" ip=""> >

    Authentication group name: remote.com

    Password authentication of the Group: mysecretpassword

    Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

    Username: myusername

    Password: mypassword

    Please contact Cisco.

    Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

    You can use the PPTP on the RV180 server to connect a PPTP Client.

    In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

  • Unable to connect to the ASTRILL VPN?

    How can I connect to the Astrill VPN?

    AStreller VPS vs port 443?

  • My weather Gadget says "unable to connect to the service. I use this gadget for years and it does not work.

    I use Windows 7 Enterprise and since the beginning of February this year (2015) my weather Gadgets stop working, they first show the forecast and now they are showing a message "unable to connect to the service. Is there a problem with the gadget?

    Everyone!

    I recommend this link with more instructions and information on how to solve this problem of wwcc1 and his post on 2015-Feb 5: here

  • Client VPN sail to 10.0.0.0 when you are connected to the Cisco VPN

    I have a cisco ASA that provides access remote vpn for users. The address pool is 10.16.135.x. When a user (windows) connects to the VPN, a route to 10.0.0.0 255.0.0.0 is added to the routing table. If the private IP address of the user is in the 10.x.x.x range, the user can still connect to its local network. However, if the user has a remote site that also uses 10.x.x.x, the user is no longer able to connect to the remote site because of the 10.0.0.0 new road is added after the vpn connection is established.

    10.0.0.0 255.0.0.0 on a 10.16.135.217 route 281

    10.0.0.0 255.0.0.0 10.0.0.1 10.16.135.217 100

    10.16.135.217 255.255.255.255 on a 10.16.135.217 route 281

    Small,

    Can you please set the pool like this:

    mask 10.16.1.10 - 10.16.1.254 255.255.255.0 IP local pool Subnet_10

    Test again and I would like to know the results.

    Daniel Moreno

    Please note all messages that will be useful

  • Unable to connect to the ASA vpn Android client

    secHello, I have problem with android client. So I've solved many problems and finally could get the PHASE 1 and PHASE 1 COMPLETED messages in newspapers :). In any case, I have a problem different, even if the client of the phase 1 and 2 completed failed to connect again. Here are the logs:

    | 21456 | *** | 500 | Built of UDP connection entrants for outdoor 600577524: * / 21456 (* / 21456) identity: * / 500 (* / 500)
    | 27262 | *** | 4500 | Built of UDP connection entrants for outdoor 600577567: * / 27262 (* / 27262) identity: * / 4500 (* / 4500)
    Group = ANDROID_PROF, IP = *, automatic NAT detection status: remote endpoint IS behind a NAT device this end is behind a NAT device
    Group = ANDROID_PROF, IP = *, floating NAT - T of * port 21456 to * port 27262
    Group = ANDROID_PROF, IP = *, PHASE 1 COMPLETED
    Group = ANDROID_PROF, IP = *, IPSec initiator of the substitution of regeneration of the key time of 0 to 4608000 Kbs
    IPSEC: Remote access out HIS (SPI = 0x0429CEA7) between * and * (user = ANDROID_PROF) was created.
    Group = ANDROID_PROF, IP = *, the security negotiation is complete for user (Responder), Inbound SPI = 0xc95803fc outbound SPI = 0x0429cea7
    IPSEC: Incoming remote access between HIS (SPI = 0xC95803FC) * and * (user = ANDROID_PROF) was created.
    Group = ANDROID_PROF, IP = *, PHASE 2 COMPLETED (msgid = 9aab13ed)
    | 27262 | *** | 1701 | Built of UDP connection entrants for outdoor 600577657: * / 27262 (* / 27262) identity: * / 1701 (* / 1701)
    L2TP tunnel created, tunnel_id 24, remote_peer_ip is *, 1/ppp_virtual_interface_id, client_dynamic_ip is 0.0.0.0, user name is *.
    Tunnel L2TP deleted, tunnel_id = 24, remote_peer_ip = *.
    IPSEC: Remote access out HIS (SPI = 0x0429CEA7) between * and * (user = ANDROID_PROF) has been removed.
    IPSEC: Incoming remote access between HIS (SPI = 0xC95803FC) * and * (user = ANDROID_PROF) has been removed.
    Group = ANDROID_PROF, IP = *, Session is to be demolished. Reason: The user has requested
    Group = ANDROID_PROF, user name =, IP = *, disconnected Session. Session type: IPsecOverNatT, duration: 0 h: 00 m: 07 s, xmt bytes: 1021, RRs bytes: 955, reason: the user has requested

    As you can see session was demolished immediately, said Android failure. The Android settings:
    Name: ANDROID_PROF

    Type: L2TP/IPsec Psk

    The IPsec identifier: ANDROID_PROF

    Pre-shared key IPsec: cisco

    The ASA config:

    attributes global-tunnel-group ANDROID_PROF
    address IPSEC_RA_POOL pool
    Group-LDAP LOCAL authentication server
    LDAP authorization-server-group
    NOACCESS by default-group-policy
    IPSec-attributes tunnel-group ANDROID_PROF
    IKEv1 pre-shared-key *.
    tunnel-group ANDROID_PROF ppp-attributes
    CHAP Authentication
    ms-chap-v2 authentication

    ANDROID_PROF_GP group policy attributes
    value of DNS server *.
    VPN - 4 concurrent connections
    Protocol-tunnel-VPN l2tp ipsec
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list ANDROID_PROF_USERS
    Cisco.local value by default-field
    the address value IPSEC_RA_POOL pools

    Hello

    Your problem is with Android L2TP/IPsec client that connects to the AAS has been caused by: CSCug60492 (Android phone disconnected from l2tpoveripsec and reconnect asa hung)

    It is Android actually issue, not a bug of the SAA. This resolution is based on Android.

    I hope this helps.

    Thank you

    Vishnu

  • Internet has stopped working when it is connected to the Cisco VPN

    Hello

    I configured IPSec (Ikev1) WHAT VPN remote access in ASA 5520, VPN connects correctly and I am able to access all internal resources but Internet does not work when connected to the VPN. I studied on it and found the problem with the default gateway, I'm ddefault duringVPN gateway connection. I'm surprised in ASA, there is no default gateway configured for the pool of IP VPN remote and remote clients then how can get a default gateway.

    I describe my problem below using image in shootout gave it.

    Thanks in advanve.

    Hi Mukesh,

    Until you specify command below according to your group policy, you will get the default gateway assigned by ASA to the user of your vpn. Please update your config strategy & group of tunnel

    Group XYZ policy attributes

    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value split tunnel

    tunnel of splitting allowed access list standard 172.16.1.0 255.255.255.0

    For anyconnect with split tunnel use below URL help

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml

    ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml


    HTH

    Concerning
    Santhosh silou

  • Unable to connect to the Cisco webex. It is said 'ActiveTouch général' plugin broke down. Please advice

    I was able to connect to Cisco before. Today all of a sudden, I get this message from the plugin crash. I have even tired of reloading the page, but nothing helped.

    If you use the version of ESR Firefox 17.0.11 (help > subject) then you can upgrade to the current version of Firefox 24.3.0 ESR.

  • Unable to connect to the Internet after you install the update

    My computer crashed this afternoon. I restored it since restoration, but Firefox lost disk and my Trend Micro antuvirus.  I downloaded the two products, but when I try to install them, they are trying to reconnect to the internet to complete the download.  Or the program is able to do.  I can log on the Internet and to allow them there have turned off the Windows Firewall and Windows Defender, suspecting one of them was blocking the remote connection.  I am running Windows Vista and IE8.  When I Windows Update, I lose all internet connections and have to use system restore to go back before the updates.

    Original title: remote connections

    Hi Cauvagee,

    ·        You are able to access remote desktop connection now after you disable the firewall and Windows Defender?

    It seems that one of the update is at the origin of the problem of Internet connectivity. You can follow the steps below and check it it helps you solve the problem.

    Step 1

    You can access to view the history of update on your computer and the Coachman, who was the last update that was installed when this problem occurred and post back the details of the update.

    To view the update history, follow the steps below:

    a. open the control panel (all items view), and click the Windows Update icon.

    b. click on the link to view update history.

    Step 2

    Check out who are the updates which has been installed on the computer before that the problem began, later, uninstall it and check if that helps.

    1. Open installed updates by clicking on theStart button, clickingControl Panel, clickingPrograms and then underPrograms and features, clickingView updates installed. Note the number KB for the updates have been installed before this problem started.
    2. Select the update that has been installed and uninstall the updates one by one and check the update which is at the origin of the problem.

    Step 3

    Once you take note of the update that causes this problem, you can download the stand-alone version of the update on your desktop and try to install it manually and check to see if it helps you to solve the problem of internet access. To download the standalone version of windows updates follow the steps below:

    a. take note of the update with the Ko only when your computer tries to update and install it.

    b. visit the following Microsoft Web site:http://www.microsoft.com/downloads/Search.aspx

    c. search by downloading the update.

    d. save it on the desktop.

    e. try to install it manually.

    If the problem persists after you have installed the stand-alone version of update, you can try to start the computer in safe mode with network and check if you can connect to the internet and post back the result. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

    Access the link to learn more about how to start the computer in safe mode:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    I hope this helps. Let us know the result.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • A typedef Enum with more 100 entry don't update

    Hello! Enum even one made before update the TypeDef (left with 100 points), one made after update (right with 104 articles) Why not is not updated even if 'Auto Update of Type def' is active... Same with LV2010

  • Used to install updates

    How to remove updates that need to be completed, but I do not want to install? They have been sitting in my computer since June and still do not settle. I don't want them, don't need them and remove them if she stops to try whenever I got close. I "u

  • problems with service pack1

    Hello every day I turn on my computer I get according to notification update updates are ready to install and every time it is service pack 1 is this normal I mean how manyupdate are there for the sevice pack 1 how to fix the problem and every day I

  • USB stick not recognized when you try to copy network settings

    trying to Setup network printer and need to copy my network settings on a USB stick and transfer to the printer wireless. When I plug the USB in the system recognizes the disk put option on the screen doesn't change to the other to allow the settings

  • paint application

    The application of paint in windows 8 always happens when I take a picture. Can't get off! Can't do anything with my pictures on Windows 8. Help!