disable the firewall for Spades?

Similar Questions

• Java recommends disabling the firewall for installation

  must install java and java recommend disable firewall - is it good?

  I don't know what he asks you to do. I never have to turn it off. Go ahead and left running while you are installing.

• How can I disable the firewall of windows for FPGA

  I tried to compile an FPGA vi. Towards the end of compilation, asked me if I wanted to disable something in the windows firewall (probably to allow for communication between my computer and my PXI-7854R). At the time, I had no administrative privilege and couldn't do anything but cancel this request. Of course, nothing that I compiles now runs. How to get back to the point where I can disable the firewall?

  A picture of the error message is attached.

  

  Thank you

  Stephen

  Hello Stephen,

  Thank you for posting what solved your problem - it helps other users who stumble on this troubleshooting page.  So that they can see what position fixed, could you please go ahead and mark the message as a "solution" and give good Bravo?

  Thank you!!

• disable the firewall gateway wirelesss

  Got first one iPhone, but without a plan.  I can use it all default programs, but cannot receive/Send Mail as my wireless modem Motorola SBG900 Wi - Fi put in place of the included firewall is enabled.

  Is there a way to disable the firewall of my wireless gateway without running configure the modem again?  I'm afraid to spoil current working set up with my laptop. Thanks in advance.

  Hello

  1 did you install a third-party firewall on your computer software?

  2. you use an e-mail client or webmail on your computer?

  3. what email provider do you currently use? It's Gmail, Hotmail, Yahoo?

  4. are you able to access the websites properly?

  5. what web browser do you use?

  6. you you receive error message?

  7. have you made changes on the computer before this problem?

  You can disable temporary windows on the Windows vista computer firewall. Check out the following link.

  Turn Windows Firewall on or off

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  See also:

  Windows Firewall: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Firewall-recommended-links

  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. Viruses or malicious software can get into the system. After you complete this step of troubleshooting, turn on the firewall.

  If the firewall settings are related to the iphone, you can contact apple support for assistance.

  
  

• After disabling the firewall, I can't access port 6699

  Trying to troubleshoot a remote dvr look at a problem.  The server of dvr of WinXP Pro HOST is up and running and I can view and save the cameras here.  I go to another computer on my network and punch in the IP address and port number (that I had allowed thru firewall of HOST), and it does not allow the connection of Windows 7 Ultimate.

  I have disabled the firewall on the HOST pc, and still, it did not allow the connection?  What gives, and how to fix this?

  You did not mention what firewall it was, it gives a warning message?

  Try this

  At the command prompt (start > run > cmd)
  Enter netstat - ano
  You will get a report of active connections
  Report includes: Protocol, local address, address abroad, State, PID
  Example: Proto local address foreign address State PID
  UDP 127.0.0.1:6699 *: * 6699
  Note the PID (process identifier) associated with the port 6699 (also note the local address, address abroad, the Protocol and the State.)
  Then, start the Windows Task Manager
  Select the process in the Task Manager tab
  Find the PID you noted previously
  setting of netstat-s displays statistics by Protocol. By default, statistics are shown for IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, and UDPv6

  How to manually open the Port 6699 in Windows Firewall?

  Windows Firewall may block the port default 6699. If you want to allow a program to communicate using Port 6699 through the firewall, you can usually do this by selecting the program required in the Exceptions tab in Windows Firewall. However, sometimes the program is not listed on the Exceptions tab. In this case, you must open the port manually.

  1. open the Windows Firewall by clicking on start, Control Panel, security, then Windows Firewall.

  2. click on "allow a program through Windows Firewall".

  3. click on 'add port '.

  4. in the 'Name' field, type a friendly name to the port as "Port-6699'.»

  5. in the 'Number of Port' field, enter '6699' port number.

  6. Select TCP or UDP, depending on the Protocol required to port 6699

• How to disable the option for children to receive messages from my iPhone on their iPhones?

  How to disable the option for my children to receive my iPhone imesages on their iPhones?

  Do not share account iCloud with them. iCloud accounts are not meant to be shared.

• I want to disable the motherboard for a Pavilion p6232p video driver

  I need to turn off or disable the driver for the card on mother built in video card in a p6232p of Pavalion.

  The manufacturers motherboard is an Asus IPIBL-LB

  I bought a GE Force 620 Nivida GT video card. I installed it. Then, I ordered a 400 watt power supply to replace the 300 watts delivered with the p6232p. I put everything back together and then I read the installation

  Once again the instructions and I saw that everything built the onboard video drivers supplied with the p6232p had to be disabled. I was frustrated and hung on my monitor for the new card (Nividia GT 620).

  I booted up and everything worked fine. I then installed the CD supplied with the card and it worked as well. BUT! the installation instructions were to remove the old video card or disable any motherboard built

  among drivers. So, that's what worry me because when I started first with the new pc card took control without any installation disc. There is no connection to the old pc blue monitor connector. Maybe I could check the list of devices to see if the drivers are always active. Thank you for your response, cajanpepper

• Can I disable the requirement for a password at startup in Vista?

  Can I disable the requirement for a password at startup in vista?

  Hello

  This should help you:

  "How to Log on automatically on startup of Vista '

  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  See you soon.

• How can I disable the narrator for GOOD?

  How can I disable the narrator for GOOD! Whenever I turn off the narrator in his small window, (the program access programs) everytiime I turm back on my computer, he returned and annoyingly turns back on and it's a real struggle to find where the Narrator function to turn it off. She sometimes, most of the time I need still to do. Please tell me what to do and how I can stop this ONCE and FOR ALL! without going back over and over every time I turn on my computer. It's very annoying and time consuming. Thank you.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/i-started-the-Narrator-by-mistake-and-i-cannot-get/8d8d6ece-95d9-4F05-9965-011eb2799275?TM=1315352201308

  How can I disable the narrator for GOOD! Whenever I turn off the narrator in his small window, (the program access programs) everytiime I turm back on my computer, he returned and annoyingly turns back on and it's a real struggle to find where the Narrator function to turn it off. She sometimes, most of the time I need still to do. Please tell me what to do and how I can stop this ONCE and FOR ALL! without going back over and over every time I turn on my computer. It's very annoying and time consuming. Thank you.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/i-started-the-Narrator-by-mistake-and-i-cannot-get/8d8d6ece-95d9-4F05-9965-011eb2799275?TM=1315352201308

  This link you has the answer.

  If you want another version of the answer, here's the tutorial to show you how enable or DISABLE Narrator

  http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html

• How to disable the sound for the Minesweeper

  The old winmine had no noise. I liked it. How can I disable the sounds for the new Minesweeper?

  Thank you, Doug

  In Minesweeper, press F5 to bring up the options then uncheck play sounds , and then click OK.

• BlackBerry smartphones can not disable the firewall - see the key for the

  "The application has attempted to open a connection to a location inside the firewall which is not allowed by your policy" "

  Please help me...

  Hello Nurulfy7,

  Welcome to the community,

  Yes, you get this message because you under BES account and you can not disable it.

  Take care

  Click 'Like' If you want to thank someone.
  If problem resolves mark message (s) as a 'Solution', so that others can use.

• need to turn on the firewall for my macbook pro

  MacBook Pro (13-inch, 2011) work OM, processor 2.4 GHz, 4 GB memory.  Just bought for 6 month contract Mackeeoper to protect your computer, but did know that my "firewall is disabled" for unknown reason.  When I try to sign as Adnministrator, I can't access to "turn on"firewall. "

  Should I enter new name Admin and the password in the attempt to access?  Thank you for your help.

  Any Admin should be able to unlock the Firewall setting to turn on or off.

  Try to uninstall Mackeeper and try again with your administrator account. My guess is that you are going well AFTER you get rid of Mackeeper.

• Is there a configuration parameter that can be set so that the various web pages can NOT disable the ability for the latest data from the Clipboard in a field instead of typing

  Occasionally various websites have forms to fill out. Frequently, the password field and the ability to paste from the Clipboard is disabled. Since I use a password manager and generate passwords as mN0ZJ1Pj (generated example for display) she would like to be able to paste the password because there is less tendency for me for spelling errors.

  I would like to know if there is a configuration setting that causes the instructions on the web site to disable the ability to stick to be ignored. My position is that it's MY computer and I should be able to do what I want on my end.

  Thank you.

  Fred

  Go to the Mozilla Add-ons Web Page. There is an add-on called RightToClick. Look around. There are a lot of good stuff here.

• How can I disable the search for 3 ~ 'guess' in the address bar, above the suggestions of my story?

  In the new version of Firefox, when I start typing something in the address bar, instead of display the suggestions of my story, it shows 3 ~ ' popular search strings ", as in the Google search bar (for example if I type"a", it shows aol mail aol and amazon). I find this very irritating feature, is there a way I can disable the seach assumptions, so I can browse my pages of the story as before?

  Thank you!

  Hello mreti88, this isn't a feature built into firefox - probably one of your installed addons is the cause: extensions, themes, and issues of hardware acceleration to resolve common troubleshooting Firefox problems

• last version of Firefox can not ensure a secure connection without disabling the firewall, why?

  I've upgraded to the latest version of Firefox and now whenever he goes to a secure connection, it debits far and doesn't connect or said that the connection was refused. I'm under Firewall PC Tools and strangely when I turn off the firewall, it connects. I don't really like it. I tried to remove Firefox to the list of applications and add new, but it did not help.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls