Disable the USB by each Application

Similar Questions

• Pinwheel 10-20 seconds on the launch of each application

  Since upgrading my Macbook Pro at El Capitan I had a problem where launch apps cause a 10-20 seconds of reel. Oddly, the application seems to start immediately (i.e. clicking on Safari immediately brings up the Safari window) but when demand becomes inadmissible and non-interactive with reel spinning for an average of 15 seconds.

  I ran repair disk such as suggested by some other items with no improvement. I used the console to collect newspapers while it happened between a launch system and Safari preferences and the only common element between the two seems to be the message, repeated three times.

  2016-03-07 12:00:04.102 PM apsd [81]: could not send activation record to com.apple.ManagedClient.enroll service

  2016-03-07 12:00:13.051 PM System Preferences [492]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:13.051 PM System Preferences [492]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:13.052 PM System Preferences [492]: failed to SecTaskLoadEntitlements error = 22

  from 12:00:04.102 to 12:00:13.052 (about 9 seconds) System Preferences was not on the screen and available. After the last SecTaskLoadEntitlements has no error to the 12:00:13.052 that the Preferences window

  Similarly at the launch of Safari

  2016-03-07 12:00:31.068 PM Safari [497]: KeychainGetICDPStatus: key :-25300

  2016-03-07 12:00:31.068 PM Safari [497]: KeychainGetICDPStatus: status: power off

  2016-03-07 12:00:31.095 PM Safari [497]: KeychainGetICDPStatus: key :-25300

  2016-03-07 12:00:31.095 PM Safari [497]: KeychainGetICDPStatus: status: power off

  2016-03-07 12:00:31.414 PM EET [275]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:34.082 PM configd [56]: inet_set_autoaddr (1, 1) failed, busy resource (16)

  2016-03-07 12:00:47.418 PM Safari [497]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:47.418 PM Safari [497]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:00:47.418 PM Safari [497]: failed to SecTaskLoadEntitlements error = 22

  The Safari window appeared almost immediately by clicking on the application icon. However, when the window pops up about 12:00:34 that the wheel seems to do the Safari window says plue, until that last SecTaskLoadEntitlements has no error is recorded in 12:00:47.418 (13 seconds)

  This happens on the launch of EACH application on the Macbook, iTunes, Safari, Mail, preferences system, AppStore... everything...

  Here's an example to launch app store where I paid VERY very attention to this journal entry begins and stop the roulette

  2016-03-07 12:13:37.069 PM App Store [524]: unknown class FRToolbar in the path /System/Library/PrivateFrameworks/StoreUI.framework/Resources/Base.lproj/FRStor eViewController.nib Interface Builder file.

  2016-03-07 12:13:37.880 PM EET [275]: failed to SecTaskLoadEntitlements error = 22

  PINWHEEL begins immediately after the connection of the above error *.

  2016-03-07 12:13:53.181 PM App Store [524]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:13:53.181 PM App Store [524]: failed to SecTaskLoadEntitlements error = 22

  2016-03-07 12:13:53.181 PM App Store [524]: failed to SecTaskLoadEntitlements error = 22

  REEL stops immediately after connecting the three errors above, that all appear at once in the console *.

  I have no idea what happened to SecTaskLoadEntitlements, but clearly it is originally a kind of performance problem because this is the message that surround each reel application console.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

  When the recovery menu appears, select disk utility, and then press the continue button. After loading disk utility select it

  indented Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

  is over, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• priority of the Internet for each application

  priority of the Internet/network for each application as between ie8, firefox and a download manager like utorrent, igetter, orbit downloader

  Hi, Thibaut,.

  There are some non-Microsoft programs, you can download from the Internet and use them to set the priority for each application.

  Note: Using non-Microsoft program is at your own risk.

  For more information on the definition of priority network, see the following article:
  See How to change the binding order of the network in Windows XP cards

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to disable the USB port and change DVD drive to read-only?

  I have upgraded my Vista Home Premium from window to window 7 Ultimatum. I tried to disable the USB port and and change the configuration of DVD room to read only via the bios, but I wasn't able to do. The bios always the same, whether it was when I had vista.

  I wonder if the operating system upgrade from Vista home premium to Windows 7 ultimate trigger necessarily upgrading the bios in order to take full advantage of the Windows 7?

  Thank you

  * original title - upgrade from Vista home premium to Windows 7 ultimate necessarily triggers upgrading the bios in order to take full advantage of window 7? *

  rThen your question isn't specific to Windows 7, you must consult the manufacturer. You should be able to disable the USB via the BIOS ports. Also, why do you want to set the optical drive as read only? If it is shared? If so, the advanced sharing disk properties, from there, you can set permissions on the drive. If you releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Disable the USB port

  How do disable you the two USB ports on the front of a Dell Inspiron 3647? Or better yet, the password protect them?

  The problem with the software approaches, either change the registry or by using an application like IntelliAdmin, is they disable all the USB storage for all users. If you won't be able to connect a USB or USB either. Note: If you use them, only the key and encrypted USB drives USB encrypted is HIPAA compliant.

  You will also need a password protected administrator account and only this account has the right to change the registry or re - run IntelliAdmin to reactivate the USB access.

  The Manual shows two connectors on the motherboard to the front USB ports. If you unplug the cables of these two connectors (be sure to store out of the way or cover with the CHATTERTON, so they can't communicate with the motherboard, case, or any other component), you can physically turn off the two front USB ports.

  BUT, BUT... I do not know if that generates an error message when the PC starts, or if the PC starts even when these two cables are disconnected. May be worth a try...

  My other thought is to put the PC in a cupboard locked (with adequate ventilation) and only personnel are the key.

  Since it is a HIPAA question, you may not be the first to meet, then maybe you can find acceptable solutions to the HiPAAJournal.com or related resources.

• Qosmio F60-136: Impossible to disable the USB sleep-and-Charge in hibernation mode

  USB sleep-and-Charge function is marked as disabled in BIOS (v2.70).
  This can be checked with Sleep Utility (v1.4.1.5) where the function also seems to be disabled.
  During the stop of my laptop, smart phone or the stop MP3 player to charge.
  Everything is OK down there.

  However, when putting my laptop in * hibernation mode *, my Smartphone and my MP3 player continues to be charged!
  It's a real problem, because, even if no device is plugged into the USB port, in hibernation, the battery loses capacity quickly (much more when the laptop is turned off completely)

  * Obviously a bug in this feature. Please provide a fix as soon as possible! *

  _Environment details: _
  Toshiba Qosmio F60 136
  BIOS version: 2.70
  THIS version: 2.40
  Version of the utility of sleep: 1.4.1.5

  Hmm interesting
  Have you checked if the sleep and the load is disabled in USB Sleep and Charge Utility
  If please don t mix USB Sleep and Charge utility and utility of sleep.

• How do I * definitely * disable the USB bootable media

  Thus, in WinPe and load HAPI.  I put successfully boot options
  CCTK BootOrder - bootlisttype = UEFI - disabledevice = uefi.1, uefi.2 - valsetuppwd =

  On the next reboot, my bootable USB media is removed from the list of startup, but only when the usb key is in the port.

  If I remove the USB key, reboot and re - insert the USB, it is considered as a new device and it can be used as a boot again media

  How to disable permanently of the bootable USB media?

  -usbemu solves this problem.

• Disabling the UAC prevents legacy applications to install?

  Original title: online store and Legacy applications

  If I turn off UAC that prevents the files to write to the virtual store when installing legacy applications?  If this is not the case, how can I stop this from happening?

   
  Hello
   
  Yes, it is true that turning off UAC does not affect when the installation of applications or programs. Usually the UAC prompts the user when you try to install programs from unknown publishers or third-party Web sites. UAC for the security of the system.
   
  UAC disable WARNING: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.
   
  Disable (UAC) user account control:
  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off
   
  Reference links:
  When should I programs to make changes to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/when-should-I-allow-programs-to-make-changes-to-my-computer
  
  Windows security: Recommended links:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Security-recommended-links
  Guided Help: adjust the settings of user account control in Windows 7: http://support.Microsoft.com/kb/975787
   
  It will be useful.

• Is it possible to disable the "long click" "Prompt to download" mini menu WebWorks?

  Hello

  Although the feature click-n-hold to bring up the menu mini BlackBerry with the option to "Invite to download" is very convenient, in my application (at least in some areas) it is certainly not desirable.

  In my case, I got an arrow "spinner", that the user can click on increment, or click and hold to auto-increment at a speed faster they can click.

  It works by starting the auto-increment "onmousedown" and continues to run until "onmouseup" (e.g. user break)

  However, on the BlackBerry device... a click and waiting for a second about causes the mini menu popup (blocking the view) to and do not trigger the mouseup... event so the control turns uncontrolably.

  Mini menu:

  

  I wonder if there is a setting to turn this off on one for each item (for example, a special attribute) or the worst case... a way to completely disable the function in my application (not a huge problem, because it is an option in the menu of the main application to invite a user)

  I tried the blackberry.ui.menu.clearMenuItems (); https://bdsc.webapps.BlackBerry.com/HTML5/APIs/BlackBerry.UI.menu.html#.clearMenuItems and looks like it works fine ;-)

  Thanks for all your help!

• Interrupt the USB plug PC CVI

  When I plug in the USB of my application on the PC, I can communicate with the USB using CVI8.5 and nor-visa link.

  I use a method of querying to detect the USB plug. After detecting the USB plug, I initialize the USB link.

  How can I generate an interrupt when I plug in the USB application, I need not the method of voting.

  Paul

  Hello Paul,

  How good are you with the 'concept' USB?

  If I understand correctly, then the problem is not located in CVI itself, but more related to access to USB devices in general.

  A guide very useful tool that I myself used also (in a personal atmosphere) is the following:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff540174%28V=vs.85%29.aspx

  You write your driver from scratch.

  Is there a specific reason why you don't want mark?

  Also something useful can be the following document.

  The following document could also prove to be very useful:

  http://www.codeproject.com/articles/18062/detecting-USB-drive-removal-in-a-C-program

  At a certain level, you should check "windows messages" that are produced by windows. The tutorial above should introduce some of these concepts.

• Camera is not available because the SD card is mounted on a PC. Unplug the USB cable to move forward.

  I tried to download pictures from my phone.  She does not quite sure why, but the main problem is I can't access my camera or the photos on my phone now.  I get messages like this:- camera is not available because the SD card is mounted on a PC.  Unplug the USB cable from proceed.  I have tried several things and finally just manually disconnected the cable, but not luck. and now also message as follows:- your content is not available because your phone is used as a USB storage device.   Disconnect the USB to access your content.  Would appreciate help!

  Hello

  1. What is the brand and model of the phone?

  2. have you been able to access (or discovered) files on the computer?

  3. what error do you get when you try to copy files to the computer?

  4 you did changes to the computer, before the show?

  Method 1:

  Check out the following link.

  Tips for solving problems of USB devices

  Method 2:

  Connect the phone to another computer and check.

  Method 3:

  Check if the phone includes settings to disable the USB connection.

• Disable the tilt

  Is there a way to disable the tilt on your application?

  Visit this link:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&view=by_date_ascending&Messa...

• How to keep the USB to USB UPS during sleep (Win 7 64)?

  Hello:

  Still no response to painful problem with connection to UPS for sleep loss system.

  New desktop (Dell Studio XPS 8100; Intel Core i-7 860 2.8 GHz processor; Win 7 Ult 64; 8 GB OF RAM; ATI Radeon HD 5770, etc.).
  Brand new APC Back UPS XS1300LCD w/power falling Personal Edition v. 2.2. (Win7 compatible).

  As with my old system to Vista Ult SP2 (32 bit), sleep cut power supply for USB devices, including the UPS.
  Thus, if a failure occurs during sleep, the APC software could not perform his managed system shutdown.
  Which defeats the purpose of having the inverter with its software to stop.

  TS: the manufacturer of my computer (Dell) and APC were useless.

  The only viable solution "circumvention" of Vista has been to implement a diet plan that NEVER put the HDD to sleep.  Not a very good solution, but at least it allowed UPS to stop software do its job failure.

  Apparently, it is the only solution for Win 7, as well.
  Or is it?

  If I disable the USB selective suspend in the settings for a plan power which puts the HDD to sleep, will be this or do not solve the problem and allow the computer to maintain the power (and the link with) the UPS during sleep?

  Help, please. I'm not too computer savvy, but I hope it * is * a more satisfactory solution to this problem.

  I have assigned to these forums several times in recent weeks, but never seem to get an answer.

  Thanks in advance,

  daledoc1 Desktop 1: Win 7 Ult (64); Office 2: Win Vista Ult SP2 (32); Laptop: Win 7 Pro (32);

  Hello

  Follow these steps and check if that helps:
  1. go to start and type in Device Manager in the start search box and press on enter.
  2. in Device Manager, right click on the USB device and select Properties
  3. click on power management, then uncheck to Turn off energy-saving and activate the option to wake up from its sleep.

  You can try to disable USB selective suspend and check if it solves the problem. Disabling this option has corrected the problems of connection with the devices USB mode 'sleep' for many users.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to disable the MIDI to the logic of just my USB key

  Question: Where exactly should I do to disable the MIDI to the logic of just my USB key (I am sending them to another application and do not want it also picked up in L, but don't want any logical MIDI stop). And where does logic to send any MIDI out? I looked at all the prefs I can find, watched dozens of links tuts and docs online, nothing... It's so easy live, sigh!

  TIA!

  Open the environment window

  go to the clicks and ports

  look out on the physical input and find your usb device

  New-> monitor (create this object)

  pull a cable from your usb device on the physical input to the monitor

  That's all

  When you want to run into logic once again simply remove the cable

  get that to work first, then we can discuss outings

• How can I disable the Google Maps message "Google has disabled the use of maps API for this application? This as Microsoft tries to crush Netscape?

  In the last day or two (8 August 2012) each time I start Firefox (14.01.01) I get a pop up that says "Google has disabled using the maps API for this application. He directs me to Google Maps terms & Conditions, but does not provide a solution to disable the pop up. I tried to disable Google Maps as an Add on Firefox, but still not the context menu.
  It is easy to fix the problem or is this an attempt by Google to force me to Chrome, much like trying to crush Netscape in favour of Microsoft's Internet Explorer?

  I thought about it. It is not the browser itself. It happened that I had two pages that open when I started the browser (at home and at work) and it was one of them who had a Google map. They have had to fix their Web site.
  Sorry Google, to think that you were an evil Empire!