Disable TouchPad HP ENVY 15 t-j000

Similar Questions

• WANT x 360 laptop: how to disable TouchPad on ENVY x 360 laptop?

  1. I have no key.

  2. I have attached a mouse but the TouchPad is always enabled.

  3. I have 2 options, but all of them are frozen:

  Control Panel\Hardware and Sound\Tapping\TouchPad Settings\Double to disable Zone press to activate or disable the TouchPad

  Control Panel\Hardware and Sound\Tapping\Top Action\Switch wide TouchPad left

  So, what can I do to disable the TouchPad on ENVY x 360 laptop?

  Solved.

  Solution:

  Start /.

  Research /.

  Personalize your computer.

  Change mouse pointers.

  HP control area settings.

  Disable HP control of area

  Source:

  http://h30434.www3.HP.com/T5/TouchSmart-PC/how-to-disable-touchpad-on-HP-envy-TouchSmart-M7-notebook-PC/TD-p/3180731

• Disable touchpad HP Envy 17

  I have exactly the same problem you have posted... Do you have a solution?  There is no 'mouse' or "Point Touch Control Pad" with a disable to kill the touchpad.  I am thinking to resort to disassemble the laptop and unplug the cable that plugs into the touchpad itself.  I also deleted the synaptic touch pad (Windows 7) device driver and did not help.

  I'm pretty sure that remove the cable from the touch pad will fix the problem, but it is a fairly long process... 20 with respect to and then if I still wanted to sell the laptop, I would probably have to plug the cable back in again for someone else.

  Please help, Dave

  I've done what I suggested above to remove the flat cable for the touchpad disable touchpad and it worked very well.   I removed the two ends and folded cable where HP had folded it and scotch taped it to the system board next to the connector where it plugs IO on the system board so that someone will be able to put it back in if I never sold it.  On the plug, it has a little fitting valve rubber to flip upward to allow you to remove the cable at both ends.  I don't have any errors saying that it was not connected.  After the cable has been removed it simply does not work which is exactly what I wanted.    Problem solved.

  Dave

• Disable Touchpad HP Envy Windows 8

  I have a pen and press who confuses the computer and think I'm using the touchscreen. Sometimes I do, so I don't want to turn off the touch function. However, when I go on change something, like writing an email or a search on google, the touch keyboard appears which for some reason any is huge - it used to be small.

  When the touch keyboard appears, it minimises everything else, so I have to resize my windows again. Its annoying if freaking. I need to know how to disable my touchpad or minimize.

  I posted this question before, and a man tried to help me, but what he suggested did not work. I can resize the keyboard, and the little icon to the left of the narrow window box does not have the tiny keyboard.

  His work computer, so I can't exchange it, despite everything, I don't know if it's a windows problem 8 or an HP problem. I tried the two forums.

  Help please before I lose my * beep *.

  See you soon

  Tulipface

  

  Press Windows + W and type of Services.

  Select service touch keyboard.

  Right click on this option and stop the service

• HP ENVY Notebook PC m6: Disable Touchpad HP ENVY Notebook PC m6

  I never use the "Control Zone" button on my laptop because I use a wireless mouse.  Before that I have upgraded to Windows 10, I was able to disable the touch pad continuously.  Since the upgrade, I have to go to the control panel and turn it off after each reboot.  Is there a way to keep the key setting as disabled until I have decide to change myself?

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Disable Synaptics ClickPad in the usual way, and then check if this setting is now preserved after a reboot.

  Kind regards

  DP - K

• HP envy 15 t-q400: permanently disable touchpad

  Hi everyone, does anyone know how to permanently disable a synaptics touchpad? I went to the touchpad settings and clicked on disable touchpad so that disable touchpad when a usb mouse is connected. My problem is that when I reboot, the pad touchpad is enabled again and I have to repeat the steps above. Is it possible to disable permanently? Maybe something in the bios? I also uninstalled the synaptics driver, but my touchpad still works.

  Hello

  Try the following.

  First of all, if she has not already reinstalled, install the driver Synaptics, and then restart the laptop.

  When Windows has reloaded, hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Open the control panel of Synaptics and set options to 'disable the touchpad' and 'disable the touchpad when a usb mouse is connected', and then apply the change.

  Check if the settings is now kept after a reboot.

  Kind regards

  DP - K

• HP Envy 17 t-j000: need of bios password

  HI -.

  Laptop HP Envy 17 t-j000

  8.1 Windows 64-bit

  Need password. Get the number of disabled system 72089604

  Thank you

  Steps to follow:

  1. Use the posted above unlock code to access the BIOS
  2. Disable all passwords that are enabled
  3. If current password request - type the unlock code
  4. New password, simply press the ENTER key
  5. Repeat the same thing to check the password column.
  6. Then exit the BIOS saving & output option to save the changes.

  Troubleshooting:

  Incase if the password does not work please try a Hard Reset as follows.

  1. Shut down the laptop
  2. Disconnect the power adapter and remove the battery
  3. Hold down the Power button for 30 seconds
  4. Plug the power supply/AC adapter (leave the battery at the moment) and start Notepad
  5. If now see you a password, please enter the same password I've shared before and press on enter

  Hope this helps, for other queries in response to the post and feel free to join us again

  Kind regards

  GBL84

  -------------------------------------------------

  Although I am an employee of HP, I speak for myself and not for HP

  If my POST helped you, please click on 'white Thumbs Up' to say thank you!

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem

• HP Envy 17 t j000: Simple pass blocking my window password

  I updated my driver to scan finger print pass Simple. When I did this it stopped working. I have registered in and removed my finger because it wouldn't work and that I registered it again. According to implementing it successfully. I restarted my laptop and could not connect using my finger or my Windows password. I connected on my other laptop and changed my Windows password. I logged on this laptop and also connected on my Windows phone without problem. It seems that the Simplepass fingerprint scanner blocking both my finger and my old password and also my new password. For this reason, I can't connect to my laptop HP Envy to disable the Simple pass or fix it. Please help as soon as POSSIBLE. I don't want to make a full recovery on this laptop. Thank you

  Hi @streetrod2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP ENVY 17 t j000 Notebook and having issues with the software of HP SimplePass.  Thanks for all the information, it is very useful to know what you've already tried. I would say to uninstall HP SimplePass and reinstalled the latest version for Windows 8.1.

  Hope it suits it.

  Thank you.

• Hiding HP ENVY 15 t-j000 Quad Edition w/SSD and hybrid propulsion system. Swap disk for one SSD Question.

  Hi all!

  I bought the HP ENVY 15 t-j000 Quad Edition and opted for the WSSD 24Go cache as well as the hybrid drive 1 TB. Do I have a problem just buy a kit of cloning and spend the hybrid propulsion system to a full on SSD in the future if I choose to?

  I did some research but I can't isolate an answer if yes or no I might encounter problems on account of the Intel RST be "associated" with the traditional HARD drive caching.

  So I wonder if I can't just simply disable acceleration of RST, clone HARD drive for an SSD via a cloning kit, remove the HARD and the SSD drive and call it a day?

  Any help with this is appreciated!

  Purgingomen wrote:

  Thanks for the info but I was even more so, I was wondering if I would have a problem Exchange with a new SSD hybrid drive later by cloning.

  I thought that I would stick with the 8 GB of RAM and WSSD combo of cache/HDD for now and sometimes down the line (as in a year or two) to get rid of the HARD drive for a full on SSD, disable caching and at the same time move to 16 GB of RAM.

  But I don't know if yes or no the WSSD cache/HDD combo makes it difficult to clone and swap the HARD drive and then just leave the disc of "cache" of 24 gigas (which is more a cache drive) there to be upgraded later.

  -Rob

  Well, I think a pure 2.5 "SSD should work on the system but make sure the cache is removed. For the purposes of cloning, I suggest using the DD command:

  http://en.Wikipedia.org/wiki/DD _ (Unix)

• I would like to turn off the graphics card Intel HD on my HP ENVY 17 Quad-j000 t

  I have a HP ENVY 17 t-j000 with Windows 8.1 Pro

  My problem is I would like to disable the Intel HD graphics and NVIDIA run the computer and my view: I can do?

  Help, please!

  Hello

  The short answer is no.

  On your system type, the gpu from Intel is always used to render the view final, regardless of whether the discrete Nvidia chip is used for the treatment or non-graphical.

  For more information on the functioning of this type of "Switchable" graphics technology, see the white paper at the following link.

  http://www.nvidia.co.UK/object/LO_optimus_whitepapers.html

  Kind regards

  DP - K

• Portege R830 - cannot disable touchpad

  Hello, strange question. But can not turn off the touchpad on a Portégé R830 (Windows 7 32 bit). I've seen this problem on two of the machines I have. This has never been a problem for the models Tecra I got, M5, M9, M10, M11, etc. R840.

  I have the latest driver installed Alps, from Toshiba.co.uk. I tried the button on the touchpad, it does not work. The device of the Alps can be disabled in the Device Manager. I tried the Toucpad of the State system, Advanced tab, toolbar properties Advanced settings. It doesn't have a single parameter «Disable touchpad» There is no option to disable the touchpad when you use a USB mouse - however, this does not work.

  Can anyone help with this? The only other option I can think of is the BIOS, but it would be inappropriate to my users, who may want to turn it back on it at a certain point during execution of Windows.

  Hi liamw,

  You can disable the touchpad if you press the FN + F9 key combination. The touchpad will be disabled until you press this combination of keys again, but a mouse external isn t touched. That means you can still use a same USB touchpad mouse is disabled with FN + F9 key combination.

  Check this box!

• HP Envy 15 t-j000 with ssd upgrade

  Hi all, I'm from outside the United States and I will be the week next to the United States and I want to buy an SSD for my HP Envy 15 t-j000, is to have 16 GB of RAM and 1 TB 5400 RPM hybrid disc, what do you recommend? I don't know if I can use any mSATA SSD, or can only install the SSD 24 - GB PN: 720564-001.

  Your help is very appreciated.

  Kind regards

  acmesoft

  You may not use any mSATA SSD. The purpose of the mSATA SSD is as a cache drive configured with the software Intel IRST. It will not replace the primary hard drive.

  What you need is a SATA SSD to replace your hard drive (legacy) of spinner with. Here is a great article on the How to geek about why you should switch to an SSD.

  The article contains information on the best ways to accomplish the task, including links to software for cloning. I highly recommend buying an SSD as a migration kit. The kits include a usb to SATA cable and software for cloning. Who will do the simple upgrade.

  Here is the guide to maintenance and Service for your laptop. The hard drive is a customer service unit. There on page 47 for instructions that explain how to remove and replace the hard drive.

• HP ENVY 17 t-j000 Quad Edition: back to Windows 8 for a clean install of Windows 7

  Hello

  My machine came with windows 8. I created the recovery using HP Recovery Manager and then CLEAN Media installed windows 7. Now, I want to take the ferry for windows 8. USB recovery I created got no .exe file. And on Windows 7 there is no HP Recovery Manager.  What should I do?

  Thank you!

  Hey @Omar92,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in on your HP ENVY 17 t-j000 Notebook and your issues with HP Recovery Manager. If she has deleted this partition completely, you will need to use your recovery CD or USB key you created when you bought your laptop. Here is a link to use the HP Recovery Manager.

  Here is a link that shows you other ways to restore the laptop back to 8.1 for Windows. The selection shows how to use a USB device.

  Hope this helps you.

  Thank you.

• Replace drive HARD laptop computer HP ENVY 15 t-j000 Quad Edition SSD

  I would buy a HP ENVY 15 t-j000 Quad Edition Notebook PC and HP v300a 120 GB SATA Solid State Drive with Upgrade Kit.

  Now, the SSD has a thickness of 7mm.

  My question is if I can replace the HDD with that SSD? The thickness is the HARD drive Bay in the laptop.

  If it is greater than 7mm from the DSS moves inside?

  Thank you

  Hello

  The old HDD on your machine is a little thicker, but at least 4 screws I do not think that new SSD will circulate in the case. I have actually put new SSD in one of my laptop (not HP) and no problem, BUT I don't move this laptop. If so, blue tac can help.

  Kind regards.

• Cannot disable touchpad on the Qosmio series F

  I reinstalled windows from backup DVD. Now, I can't disable touchpad after the plug in USB mouse. What should I do?

  All you need to do is use the FN + F9 key combination and choose the DISABLED option. You can also check the properties of the mouse. There must be the same option too.