Disassemble the help of data store, modify the existing function
I would like to change the below function to pass a single host settings and a data store single instead of doing all THE hosts connected to the lun. I would like to be able to specify the news.
Function Remove Datastore { } [CmdletBinding()] Param ( [Parameter (ValueFromPipeline = $true )] $Datastore ) Process of { if (-not $Datastore) { Write-Host "No data not defined as an input store" Output }
Foreach ($ds in $Datastore) { $hostviewDSDiskName = $ds. ExtensionData.Info.vmfs.extent [0]. DISKNAME if ($ds. ExtensionData.Host) { }
$attachedHosts = $ds. ExtensionData.Host Foreach ()$VMHost en $attachedHosts) { $hostview = Get-View $VMHost. Key $StorageSys = Get-View $HostView. ConfigManager.StorageSystem Write-Host 'Disassembly $($DS.) VMFS Datastore. The name) host $($hostview ) $StorageSys . UnmountVmfsVolume ($DS.) ExtensionData.Info.vmfs.uuid); } } } }
I tried to change it to this, but don't think I have it correct. I would run like this preference:
$esx = get-vmhost hostname
Disassemble-Datastore - VMHost $esx - data datastorename store
Function Remove Datastore { [CmdletBinding()] param ( [
[ VMware.VimAutomation.ViCore.Impl.V1.Inventory.VMHostImpl ]$VMHost [ string ]$Datastore ) Process of { if (-not $Datastore) { Write-Host "No data not defined as an input store" Output }
$hostview = Get-View $VMHost. Key $StorageSys = Get-View $HostView. ConfigManager.StorageSystem #Write - Host "disassembly $($DS.) VMFS Datastore The name) host $($hostview.) (Name)... » $StorageSys . UnmountVmfsVolume ($Datastore.) ExtensionData.Info.vmfs.uuid); } }
Try it like this
function Unmount-Datastore { [CmdletBinding()] param( [VMware.VimAutomation.ViCore.Impl.V1.Inventory.VMHostImpl]$VMHost, [string]$Datastore ) process { if (-not $Datastore) { Write-Host "No Datastore defined as input" exit } $ds = Get-Datastore -Name $Datastore $hostview = Get-View $VMHost $StorageSys = Get-View $HostView.ConfigManager.StorageSystem #Write-Host "Unmounting VMFS Datastore $($DS.Name) from host $($hostview.Name)..." $StorageSys.UnmountVmfsVolume($ds.ExtensionData.Info.vmfs.uuid) } }
Given that the data store is defined as [string] I suppose you pass the datastorename.
So you'll need to get the data in $ds store object
Tags: VMware
Similar Questions
-
The data store name already exists
Hello
I have 3 hosts in my group and I am trying to add a 4th. The host, I'm trying to add part of the cluster, but it was removed there because it has been used a few weeks somewhere else. I have since reinstalled ESX and try to add back to the cluster.
When I try and add a NFS data store to the host named "NAS-storage" added it is automatically renamed to "NAS-storage (1)", if I try the rename without (1) I get an error message... "The NAS-storage name already exists." 3 other guests are currently connected to the data without any problem store.
How can I fix it?
I tried to reboot the host, restart the service of railway infrastructure and to rename the data store on the other hosts to something else.
Welcome to the forums.
Make sure that you add the store of data with exactly the same name/IP address and the name of path as those mounted on other hosts
You can get the correct mount point by running
esxcfg-nas -l
Maish
VMTN moderator | vExpert
-
Script Help: VM->; data store Associations
Hello world
Our VM names usually end with a number (WEB1, WEB2, etc.) and our data store names also end in a number. For redundancy of the application, we use warehouses of data whose names ending with numbers for the storage needed by VMs whose names ending in even numbers and data warehouses with names ending with odd numbers for the storage needed by VMs whose names ending with odd numbers. In the physical world, odd numbered data warehouses and the presenters are physically separated from those even.
I tried to create a PowerCLI script to report incompatibilities (people make mistakes) so that I can know if any VM storage on the 'wrong' type of data store (same VM on odd storage or vice versa).
I'm really green with PowerShell and PowerCLI and suspect that there is a way to use the Get - ViewType VirtualMachine view, but have failed so far.
In my environment most VMs use more than one data store, so the script needs to check each store data used by each virtual computer for a mismatch and I want to run the report against my whole environment (a single VC server).
If anyone knows something similar that has already been done or can point me in the right direction, I would really appreciate it.
-Matt
The attached script uses a regular expression to extract the number of the guestname and the datastorename.
Then it uses the modulus of the division by 2 to check if it's a curious (1) or (0) number the same.
When you compare these between the client and the data store, you will find differences.
____________
Blog: LucD notes
Twitter: lucd22
-
Hide/show elements based on the result of the existing function
Hello
I have a function that returns two values that are drawn from a process of application On Demand (thanks Shijesh!):
I'm trying to hide/show the other two items (P11_COPAY_COLLECTED, P11_NO_COPAY_REASON) based on the return value for P11_COPAY.function myAjaxCall() { var ajaxRequest = new htmldb_Get( null , &APP_ID. , 'APPLICATION_PROCESS=getStatus',0); ajaxRequest.add('P11_PATIENT_ID' , $v('P11_PATIENT_ID')) //notice the below line.. use of split function ajaxResult = ajaxRequest.get().split(',') $s( 'P11_CCSS_STATUS' , ajaxResult[0]); $s( 'P11_COPAY' , ajaxResult[1]); }
Is it possible to add an IF statement for the function to show the two elements only if the value is equal to 'Yes'?
I tried this, but then the two values (P11_CCSS_STATUS, P11_COPAY) are not returned, much less any hide/show:
Any suggestion on how / if possible?function myAjaxCall() { var ajaxRequest = new htmldb_Get( null , &APP_ID. , 'APPLICATION_PROCESS=getStatus',0); ajaxRequest.add('P11_PATIENT_ID' , $v('P11_PATIENT_ID')) //notice the below line.. use of split function ajaxResult = ajaxRequest.get().split(',') $s( 'P11_CCSS_STATUS' , ajaxResult[0]); $s( 'P11_COPAY' , ajaxResult[1]); if ( $v ('P11_COPAY' == 'Yes' ) { $x_ShowItemRow('P11_COPAY_COLLECTED'); $x_ShowItemRow('P11_NO_COPAY_REASON'); } else { // Show Items $x_HideItemRow( 'P11_COPAY_COLLECTED'); $x_HideItemRow( 'P11_NO_COPAY_REASON'); } }
Thank you
Mattif ( $v 'P11_COPAY' == 'Yes' ) should be if ( $v ('P11_COPAY') == 'Yes' )
CITY
-
Disassemble 5.1 data store
I had a script that went through and was able to disassemble and then detached datastore in 5.0. now the powercli 5.1 update has ignored the following functions and I was wondering if there is a better way to do it.
Remove datastore
Remove datastore
Datastore Unmount and Detach-data store features come from the following document: functions of assembly/disassembly of Detach/Attach data store. Download the script from the document and load functions in your session before you run your own script.
-
Please help: measure is missing from the data store
Hello
I have an a 20 TB drive data store and a magnitude of about 40 TB (local disks, areca raid controller).
Long story short, I had to delete and re-create the volume 40 to on the RAID controller (without initialization, of course).
Now all the data is there but eui has changed for the 40 to volume and vmware is unable to mount.
log/hostd.log:2016-05-10T07:17:16.107Z of information pass [3D380B70] [Originator@6876 sub = Vimsvc.ha - eventmgr] event 118: a connected device eui.001b4d2051676528:1 may be offline. [Backvol1, 55e980d4-386dfa7f-7cb2-0cc47a09ba36] file system now is in a degraded state. While the data store is always available, parts of data residing on the extent which went offline may be inaccessible.
[root@esxi2:/vmfs/volumes/55e980d4-386dfa7f-7cb2-0cc47a09ba36] esxcli instant vmfs storage list Volume name:
VMFS UUID:
Can mount: false
UN-mountability reason: a few missing extensions
Can will: false
Reason for non-resignaturability: some missing extensions
County of measure pending: 1
Can someone help me please?
Thank you!
Hello
You asked for instructions on how to readd a missing measure.
Basically, it's pretty easy:
in the VMFS to VMFS-based volume header section, you can assign extends it.
Lets say that the basic volume is mpx.vmhba1:C0:T3:L0:1
first of all extend is mpx.vmhba1:C0:T4:L0:1
second extension is mpx.vmhba1:C0:T5:L0:1
Then you will see this string in the VMFS header:
vmhba1:3:0
and a little laterMPX.vmhba1:C0:T3:l0:1
MPX.vmhba1:C0:T4:l0:1
MPX.vmhba1:C0:T5:l0:1
Just change the list of stretches.
But: normally you can't change this section at all, and to add to the confusion, these values are stored in RAM is not trivial to change this value correctly.
I highly recommend that instead of try it yourself and repeat all the mistakes I made while learning it - call me.
I rather help you personally to give dangerous advice that will probably make things worse. -
Help with script from beginner to the data store and hard drives
Hello
I am quite new to scripting, and recently, I created a monstrosity below.
The problem is with the results. I have no idea why in the results I get the name of the virtual machine and its data store over and over again until all disks are highlighted.
Any help will be very very much appreciated.
The script:
$raport = @)
Foreach ($i in (Get-Content "Y:\vms.txt"))
{
$rekord = «»
$vm = get-vm-name '$i '.
$dysk1 = $vm | Get-hard drive | where {$_.} Name - eq 'Disk 1'}
$datastore1 = $dysk1.filename.split("]") [0].split("[") [1]
$disks = $vm | Get-hard drive
{foreach ($disk in $disks)
$hd = «»
$disksize = ($disk. CapacityGB)
$hd += $disksize
{$rekord += $vm.name + ";" + $datastore1 + ";" + $hd}
$raport += $rekord
}
$raport | out-file 'Y:\dyski.csv '.
The results in csv:
VM1Name; datastoreName; 60; VM1Name:datastoreName; 50; VM1Name; datastoreName; 40
VM2Name; datastoreName; 45; VM2Name; datastoreName; 40
The results of dream in csv:
VM1Name; datastoreName; 60; 50 40
VM2Name; datastoreName; 45 40
etc.
Try like this
$raport = @)
Foreach ($i in (Get-Content "Y:\vms.txt"))
{
$rekord = «»
$vm = get-vm-name '$i '.
$disk = $vm | Get-hard drive
$datastore = ($disk | where {$_.}) Name - eq "disk 1" hard}).filename.split ("]") [0].split("[") [1].
$rekord = "$($vm.)". The name); $($datastore); $(($disk | sélectionnez-ExpandProperty CapacityGB)-join ' |') »
$raport += $rekord
}
$raport | out-file 'Y:\dyski.csv '.
-
Remove a VMFS data store or disassemble and remove the
All,
I need your help in this matter. I have 55 shops of VMFS 3 data that I want to go to VMFS5. I want to take advantage of the block size of 1 MB, so I need to delete the database and then recreate and format it with the size of the block vmfs5 1 mb
question:
Make a right click data store, delete, recreate
or
Follow the instructions on Ko 2004605 States to take it apart, then detach.
Hello
Yes, you must follow the 2004605 Ko, so that it doesn't create a situation of ODA on ESXI host, which can lead to unstable ESXi host.
Concerning
Mohammed
-
Help with the data store migration script
Hey everybody,
I am currently responsible for the migration of disks in new storage. Each virtual computer might have multiple disks on different data warehouses. The script I'm working on that will check the VM for the disks located on a certain store of data, then if necessary to migrate the disk to the new data store. However, I'm lost. I hope I'm at least on the right track. Any help is very appreciated.
Thank you!
$csv = import-Csv-Path "e:\scripts\hunter\vantage_qadev.csv".
foreach ($ent in ($csv))
{
$ds = get-Datastore ' QADEV_OS_HUS127 * ' | Sort descending FreeSpaceGB | Select-Object - 1 first
$vmname = get-VM-name $ent.vmnames
$vmds = $vmname | Get-hard drive | Select file name
If ($vmds - eq "* QADEVOS_VSP986 *") {Get - VM $ent.vmnames |} Get-hard drive | Moving-hard drive - Datastore $ds}
Else {Write-Host "Migration without any preconditions"}
}
That's what I did to make it work. The fact it's supposed to I would say...
$csv = Import-Csv -way "e:\scripts\hunter\vantage_prod.csv".
foreach ($ent in ($csv))
{
$ds = Get-Datastore ' DST_PROD_OS_HUS127 * ' | Sorting FreeSpaceGB -down | Select-Object -First 1
Foreach ($HardDisk in (Get-VM -name $ent.vmnames |)) (( Get - hard drive))
{
$vm = Get-VM -name $ent.vmnames
$hds = Get - hard drive -VM $vm
$lunname = Get-VM -name $ent.vmnames | Get - hard drive | Select-Object -Property @{N = "Datastore"; E = {$harddisk. FileName.Split("]") [0]. TrimStart("[")}}
If ($lunname - like "* DM_PROD_OS_VSP986 *") {Get-VM -name $ent.vmnames |} Get - hard drive | Moving - hard drive { -Data store $ds -confirm: $false}
else {Write-Host $ent.vmnames ' not migrated '}
}
}
What is a better way to do it?
-
Cannot remove the data store in esxi 3.5 - can help you
OK - I have a problem. I messed up and now I'm stuck.
I was "apparently" in the middle of a converter working, and I deleted the comments of esxi3.5, while the converter still worked.
I selected the rafale and made a removal of the disc that worked, however the structure of associated file (windows 2000 Server) for this guest has not been deleted, so I chose my data store (datastore1) and - do you have a store of navigation data and when I try to delete the folder associated with the guest, I deleted I get the following error :
"General failure caused by file" (with a "/" on the next line) and all I can do at this point is to click OK box to acknowledge the error and I can't delete the folder. I can't rename it either.
I don't know how to get rid of it. I tried to create a new client with the same name as the folder and delete the comments again, but that does not work either.
I'm really stuck - I'm afraid to go into maintenance mode because I have no idea what I'm going to be confronted here since I never used the maintenance mode.
any help or ideas would be really appreciated.
You can try to do a refresh of the data store. The folder structure is not re read very often. In the data store Navigator, click the folder root on the left side and click on the Refresh button.
-
Help with the details of the data store
Hi all
Get the error for the name of the VM data store, below is the script
$report = @)
$vms = get - VM rpt01 | Get-View
foreach ($vm to $vms)
{
foreach ($dev in $vm. Config.Hardware.Device) {}
If (($dev.)) GetType()). {Name - eq "VirtualDisk")}
If (($dev.Backing.CompatibilityMode-eq "physicalMode") - or ($dev.Backing.CompatibilityMode - eq 'virtualMode')) {}
$row = "" | Select the Cluster folder VMHost, VMName, IP, Powerstate, HDMode, HDName, HDsize, MON, HDDisplayName, VMDataS
#$row = "" | Select VMHost VMName, HDName, MON, HDsize, HDMode, HDDisplayName, IP, Cluster, file
$row. VMName = $vm. Name
$esx is get-view $vm. Runtime.Host
$row. VMHost = ($esx). Name
$row. PowerState = $vm. Runtime.PowerState
$row. VMDataS = (Get-Datastore - VM $vm |) Select - 1 last). Name
$row. HDName = $dev. DeviceInfo.Label
$row. HDMode = $dev.Backing.CompatibilityMode
$row. HDSize = [system.math]: Round ($ dev.) CapacityInKB / 1048576)
$row. HDDisplayName = ($esx. Config.StorageDevice.ScsiLun | where {$_.} UUID - eq $dev. Backing.LunUuid}). CanonicalName
$lun = get-ScsiLun - VmHost $row. VMHost - CanonicalName $row. HDDisplayName
$row. LUN = $lun. RuntimeName.SubString ($lun. RuntimeName.LastIndexof ("L") + 1)
$row. IP = $vm.guest.IpAddress
$row. Cluster = (get - view - ViewType clustercomputeresource |?) {} $_ .moref-match $esx.parent.value}) .name
$row. Folder = (get - view - ViewType record |?) {} $_ .moref-match $vm.parent.value}) .name
$report += $row
}
}
}
}
get error below
Get-Datastore: cannot bind parameter 'RelatedObject. Could not convert the value of 'VMware.Vim.VirtualMachine' of type 'VMware.Vim.VirtualMachine' to type
'VMware.VimAutomation.ViCore.Types.V1.RelatedObject.DatastoreRelatedObjectBase '.
C:\VM_RDM_Info.ps1:16 tank: 39
+ $row. VMDataS = (Get-Datastore - VM $vm |) Select - 1 last). Name
+ ~~~
+ CategoryInfo: InvalidArgument: (:)) [Get-Datastore], ParameterBindingException)
+ FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetDatastore
Get-Datastore: cannot bind parameter 'RelatedObject. Could not convert the value of 'VMware.Vim.VirtualMachine' of type 'VMware.Vim.VirtualMachine' to type
'VMware.VimAutomation.ViCore.Types.V1.RelatedObject.DatastoreRelatedObjectBase '.
C:\VM_RDM_Info.ps1:16 tank: 39
+ $row. VMDataS = (Get-Datastore - VM $vm |) Select - 1 last). Name
+ ~~~
+ CategoryInfo: InvalidArgument: (:)) [Get-Datastore], ParameterBindingException)
+ FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetDatastore
Try to replace this:
$row. VMDataS = (Get-Datastore - VM $vm |) Select - 1 last). Name
with this:
$row. VMDataS = (Get-Datastore-Id $vm. Data store | Select - 1 last) .name
The problem is that Get-Datastore - vm expects the parameter - VM to be a type of virtual machine rather than the display type of the virtual machines that is referenced because the = get - vm rpt01 $vms | Get - view.
-
Impossible to disassemble the data store
Hello
I am getting below error when I was trying to United Nations set up the data store.
Call "HostDatastoreSystem.RemoveDatastore" of object "datastoreSystem-15" on VCenter Server failed. ' "
It seems there are two file inside the data store and I was not able to delete it also. This swap for old file
models which does not exist now.Please let me know how I can remove this file from the shell of ESXi forcefully command so that I could not get the data store.
Kind regards
Hakim. B
Check if it has deployed VM from this template and set the swapfile strategy to stay with the Virtual Machine. See also, if you are able to delete other files vswp with this command:
rm - rf new model - 8d25d1fe.vswp -
Help display information from the data store
Hi, I'm trying to format a table with information from various commands, and I can't find out how to do it.
Basically I want the table to have the following information:
ESX host - DatastoreName - CanonicalName - CapacityMB - MultipathPolicy
The problem is the get-scsilun cli annoys me only the canonical ability and multiple trips, but I want to add the other get-vmhost and get-datastore information
The command I'm ussing is:
Get-vmhost | Get-ScsiLun | WHERE-object {$_.} Seller - eq "EmC" - and $_. LunType - eq 'disc'} | Format-Table-property CanonicalName, CapacityMB, MultipathPolicy-auto | Out-String-width 120
No idea how to do that?
Thanks in advance!
Pablo. -.
Try something like this
$report =@() foreach($esx in get-vmhost){ foreach($lun in (Get-ScsiLun -VmHost $esx -LunType disk | where-object {$_.Vendor -eq "EMC"})){ foreach($ds in (Get-Datastore -VMHost $esx)){ $ds.ExtensionData.Info.Vmfs.Extent | %{ if($_.diskName -eq $lun.CanonicalName){ $row = "" | Select Host,DS,CanonicalName,CapacityMB,MultiPathPolicy $row.Host = $esx.Name $row.DS = $ds.Name $row.CanonicalName = $lun.CanonicalName $row.CapacityMB = $lun.CapacityMB $row.MultiPathPolicy = $lun.MultipathPolicy $report += $row } } } } } $report | ft -AutoSize
The link between the data store and the logic unit number is done by comparing canonicalname the LUN with each canonicalname of the extent of the disk of the data warehouses.
-
I have 2 hosts running ESXi 4.1 (free version of the hypervisor). Both have their own data store locally.
I need to move a VM machine (data store) of a host for the other local data store. There best way to do this with the free hypervisor?
Hello
Using VMWare Converter standalone 4.0, it's a free VMWare tool exactly for situations like yours. I use the conversion tool to transfer my virtual machines much between different hosts of ESXi and also founded to convert ESXi VMs to VMWare Server/Workstation and vice versa.
All you need to do is turn off the virtual machine and make sure that it is in the inventory of the ESXi host source; Use the VMWare Infrastucture option while selecting the source and the destination of VMWare Converter Standalone, you will be asked to provide identification name and connection of your ESXi source servers and destination information.
VMWare Converter Standalone is a brialliant tool, its very flexible in that you can resize your hard drive, use a provisioning, edit all devices.
Hope this information useful for you.
Nikhil
-
HELP - how to get the number of virtual machines on a data store?
Looking at the inventory of the data store in the VI client, there are a "number of Virtual Machines:" according to the General information for the Summary tab... I'm looking for a script that retrieves this information for me...
I started the script but I'm stuck... I am very new on this...
Get-Datastore. WHERE-object {$_ .name - like "wlp" ' "} #this gives me all the data which are not local warehouses
Could someone give an overview on how to script to retrieve the number of virtual machines on data warehouses...
Thank you, Lee
Sorry, something went wrong with the copy - paste
Get-Datastore | where {$_.Name -like "vmfs*"} | Sort-Object -Property Name | %{$_ | select @{N="DSname"; E={$_.Name}}, @{N="VMcount";E={($_ | Get-VM | Measure-Object).count}}}
Maybe you are looking for
-
HP Slate 7 voice tab display Android icon after I tried the update of KitKat candy
Hello I had an Android update information on my HP Slate 7 voice tab to update the version of KitKat candy. Once I followed the instructions on the tab got hangd and displays the icon of Android. I tried the instructions online to restart, but to no
-
video Director is not displayed
My videos are not displayed. I had a title, and the screen is still black. I changed the filters autour and again by default and still no video. Help, please also, the videos will show up on the imported videos and play from there, but when I put it
-
My windows 7 has been slain in case of failure of blue windows reconfiguration for hours.
My windows 7 has been slain in case of failure of blue windows reconfiguration for hours. How should I do?
-
Here's my problem, I have a new Acer E1-771-6458 running windows 7. Pre-installed McAfee, I would like to uninstall. However when I got to the "program uninstall/change", he brings me to a window asking me what I would take away no matter what I sele
-
Selecting the item in a list of images
Hi @ll, I tried to get the selected item in a list of images (bbui - 0.9.2.js). If I try to get the selected item as described here https://github.com/BlackBerry/bbUI.js/wiki/image-list .. .the result is still "not defined". Here is my snip of code: