Disconnection Windows export settings not working not
All,
I created a custom configuration in the Windows settings customization tab and for some reason, it seems that none of the exports run at logout. Anyone know if I have missed or changed a setting by mistake?
Here what I have.
Condition for "Windows 10'".
As you can see, I pointed out what I added.
I have attached the log with connection and disconnection, after creating two files in < LocalAppData > \Microsoft\Windows\Shell location.
Any help would be appreciated.
OK, thanks for the screenshot! Which explains a lot of things
You have made a typo in the word Immidio, please put an i before the o
Kind regards
Raymond
Tags: VMware
Similar Questions
-
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.
When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgradeAdditional resources:
-
Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »
Which edition of Windows 7 is installed on the machine?
Which edition of Windows 7 you are trying to do an Express upgrade to?
Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.
---------------------
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.
However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
"The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »What should I do?Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
Windows Update does not seem to work
I got my laptop in June and he made lots of updates from windows, but I was not able to do updates from windows. The settings are on so that it checks for updates every day, install everything she itself, but when I press on check updates, it indicates that updates and it stays like that for hours.
Last updates ever State control, updates have been installed30/06/2010. My computer is DELL studio XPS. Quatro, windows 7 64 x
It also seems that you can't find automatic updates for newly installed USB things. Could not obtain automatic installation for my printer and could get no automatic update for a mouse, so I had to cancel the update to use.
Please let me know, my guess is maybe firewall, but do not know how to get around that...
Thank you!
Harry
No, not worth it.
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article
NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").
After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxVERY IMPORTANT! => The free McAfee trial will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the McAfee Consumer products removal tool before installing updates AND BEFORE installing your new antivirus application (for example,Microsoft Security Essentials - free).
See also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
http://www.us-cert.gov/CAs/tips/ST05-007.htmlMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad!) repair facility.
Good luck, Harry!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Update of Windows XP does not work, how do I stop the Office 07/10 updates?
For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003). I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.
What is going on? I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only? This is very fustrating.
For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003). I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.
What is going on? I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only? This is very fustrating.
Hi Steve,.
Follow these steps.
Go to Start | Settings | Control Panel and double click on automatic updates. I'll explain why later.
Then, tick the option at the bottom to turn off automatic updates, and then click apply/OK.
Then, go to start, run, copy and paste this command and click OK: services.msc
In the list of Services, you can see Background Intelligent Transfer Service ?
Here's a pix what he looks like.
If it is not listed, follow these steps to register the BITS service.
Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll
Research should show this file in the following locations:
C:\Windows\System32
C:\WINDOWS\ServicePackFiles\i386
C:\WINDOWS\system32\bitsYou might only see qmgr.dll in C:\WINDOWS\system32 depending on your configuration.
Then, go to start, run and copy/paste: regsvr32 qmgr.dll and click OK
Do the same with this file: regsvr32 qmgrprxy.dll
Reboot the system and then copy / paste this command into the field run:
%windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.infIf you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386
If you could only see the file in C:\WINDOWS\system32, change the path to that instead.
Restart the PC and then go to the Services and you should be able to see BITS in the list.
Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.
If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dllReboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackupReboot once more and then do the following.
Go to this link and install the IE8 December Update:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404If you use IE7, use this link instead:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442Finally, go to the Windows Update site and you should be able to download normally.
If this is the case, re - enable automatic updates in Control Panel.
-
Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.
Hi my NameJoel,
See the methods mentioned below and check if that helps.Method 1:How to troubleshoot an installation fails on Windows XP Service Pack 3Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.See also:You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
http://support.Microsoft.com/kb/943144Steps to take before you install Windows XP Service Pack 3Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.Important: Make sure that you enable the antivirus software after you install Windows XP SP3.Hope this information helps. -
My windows sidebar does not work.
Original title: ask the community
Hello, my windows sidebar does not work, and when I ran it say my sidebar is managed by the administrator of my system and I don't have any administrators on my computer to change the settings, I would change my sidebar to reaper again my computer doesn't not part of a network
Try this FixIt associated Vista Sidebar
OR -
Hello, my computer is having a lot of problems, which started last night. Here are the things that are run:
-Windows Explorer does not respond
-Computer cannot disconnect correctly: down/restarts when I close the computer says "disconnect" for hours.
-Cannot use the system restore and may not even start from Safe Mode command prompt
-Safe mode does not load
-No applications work, apart from web browsers, and AVG.
-Cannot access the drivers, to make anything back.I added not all strange programs and I do not think it is malware, but I can't actually run my anti-malware program. My computer is running really hot, what he has always done and I keep it high and the fan not covered (I'm broke, can't afford a fix of the computer, or the new computer). Please talk is profane. I'm not all that techno. THANKS FOR ANY HELP!
The model is:
M8622 laptop Gateway
Vista Home Premium 32 BitSo I reinstalled everything, and even though it's a pain, my computer is normal again! Must have been a virus.
Thank you very much for your help!
-
Windows Firewall settings cannot be displayed because the associated service is not running
I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.
Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.
Hello
No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
you are, of course, that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows Live does not work on my laptop! Data execution prevention cause problem
orgianlt title: Windows Live does not work on my laptop!
Hello!
Windows Live will not work on my laptop, data execution prevention is a problem, but how can I solve it? It doesn't let me change the DEP settings as it says not allowed. He did run when I first got my laptop but have had to reset the laptop to factory default, everything else works very well except windows live, it is recommended to find a user-friendly version of the DEP, when I go through solutions but don't really understand DEP.
Thank you
Trisha
Hello
If the question is limited to Windows Live you can post the question in the Windows Live forum for better support.
-
Venue Pro 8 - windows button does not work
It is supposed to take you back to the screen of windows, right? Well, this isn't. Returned to the store and got a new. The same problem. Tech support chat does not work. Telephone queue time is 45 minutes more. e-mail does not support this product. ???
Check if you have "FilterKeys" on. (Laptop, ease of access settings, keyboard) If it is enabled, the Windows button will not work.
-
Installing Windows 7 x 64 Professional SP1 - clean - Windows Update does not work
I installed a new drive and thought it would be good to spend my old data to the new. as the SMART ones showed count of offshoring. And the SATA interface is a little older.
I installed a clean copy on the new disk (disconnected one for the process, so I don't have the bootloader and all that things).
I started to install all the software I ususally use. I also went into the control panel and run the Windows Update tool to search for updates.
Unfortunately, he sjowed I have no update.
I checked in different positions and I tried:
-updates affecting various parameters - did not work
-try windowsupdate.com - did not work
-tried the MsFixIt for Windows Update - did not work
-Downloaded the Windows Update Setup program and tried to install it (it sort of the attempted to install but showed just a process bar work)-did not work
-a tried to update Windows after restart. -still not working
And now im lost what could be the problem. I turned off any application that could attempt to block my connection (dough im don't know if one of them would both need).
I don't know why but my Windows Update starts just not updated.Windows 7 update problems? First read this.
:)
-
My application get Windows 10 does not work HELP Please
1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:
The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10
2. when I click on view Confirmation it Says:
YOUR UPGRADE IS RESERVED
There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.
and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10
Please help thanks
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
or
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Separated from this thread.
I have almost the same problem, + my windows update does not work.
Everything really slows down my PC
Here are my results with MGAD
Help please..!
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - YG69F - 9M66D-PMJBM
The Windows Product Key hash: /kehptF9HHVxM5d8dUnqgcfndXw =
Windows product ID: 00426-OEM-8992662-00497
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {A4E726A5-77E8-42E6-AE5F-6F881531F528} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.110408 - 1631
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLK
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: E:\Users\Andersons family Inc\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{A4E726A5-77E8-42E6-AE5F-6F881531F528} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 32 *-*-*-*-PMJBM 00426-OEM-8992662-00497 2 S-1-5-21-2881089878-228829905-3463415677 MSI MS-7369 American Megatrends Inc.. V2.0 20070612000000.000000 + 0000F5E3007018400F8 0426 0409 FLE Standard Time(GMT+02:00) 0 3 103 103 Microsoft Office Enterprise 2007 12 fFic3JgCreGGRxyF8uMWB4R4Jcg = 89388-707-1528066-65178 14 ACD7202654E586 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600497-02-1062-7601.0000-0032016
Installation ID: 013476459360581333553453351230301256370565945071587434
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: PMJBM
License status: initial grace period
Time remaining: 11640 minute (s) on (8 day (s))
Remaining Windows rearm count: 4
Time to trust: 2016.01.03. 14:38:33Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x80070005
Output beyond bitmask:--> HWID data
Current Hash HWID: NAAAAAIABAABAAEAAQABAAAAAQABAAEAJJQI2ASjydWksfYW8iziSz7piA6N7xiXME7I9A ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC1118 APIC 061207
FACP 061207 FACP1118
MCFG 061207 OEMMCFG
061207 OEMB1118 LASRYVITRAGEA copy of Lenovo OEM of Windows 7 Ultimate has been installed on a computer with a card mother MSI previous to the introduction of Windows 7... Copies of Lenovo OEM windows are approved by Microsoft for use only with a new Lenovo computer.
The copy installed Windows 7 is a counterfeit. You must purchase a new copy of Windows or to revert to the original copy installed on the computer when it was bought new.
OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLKYou have Microsoft Office Enterprise 2007 is approved for use by large companies, which is not normally found on a computer at home. The permit holder must validate the license. Until it is validated, you will not be able to update to Microsoft Office. If the holder of the license is your employer, you should seek their help, otherwise the software must be removed from your computer.
Maybe you are looking for
-
F20 - 141 - Qosmio Player - how can I set the channels?
Hi all! Everything is good with my laptop, but I have a question dealt Q-Player: How do I tune the channels, when I use Qosmio Player?I can't find any button on the remote control or front panel of the laptop... :( Thank you
-
How to recover the wmp that player missing drive
I may accidentally uninstalled or deleted my discs for my windows media player, as well as other important programmes. This has been done when I used a program (?) in my pc to retrieve the extra space in my records. I only drive "C" and "D" and I exp
-
How to change monitor 1 to monitor 2
I have a gateway with HDMI and Vga outputs. I connect to a regular computer monitor VGA and HDMI to a new 37 HDTV, but by default, the HDMI output is identified as monitor 1 and vga for monitor 2, I again change the identity of the monitors so 1-2 an
-
Unable to print from the ipad on d110
Everything seems to be set up properly, but when I try to print nothing happens.
-
Identity Manager provide URL link?
Is there a way I can just include a link to another web page within the IDM? Perhaps through a web application customized? I just need to provide users with a link to another page. Thank you.