Discrepancy between the members of the battery

I have two PC 6448 switches, I would like to buy stackable modules and create mismatches like this:
CH1: ports 1/g1, g1/2
CH2: ports 1/g2, g2/2
and so on...

Is this possible?

I asked the local dell support and they said that they are not some about that :-/

TIA

--
Daniel Fenert


Tags: Dell Switches

Similar Questions

  • BlackBerry Smartphones in my BB 8330, between the battery and new e-mail message indicator.

    In my BB 8330, between battery and new e-mail message indicator, there is a Blue Watch icon 4f.

    He started blue 1f now is 4f

    I don't know what it means? I clean all emails, messages, it's still there.

    Those who my friend, would be Facebook messages.

  • There is a discrepancy between the number of regions and links under subtabla

    Hi all
    I get an error when I run my page
    What is the exact meaning of this error

    and how can I solve this problem?

    Revised as follows:

    Lets say that we will create 3 tabs:

    Step 1: Create a pageLayout region, as you normally would.

    Step 2: Select the pageLayout region in the JDeveloper Structure pane, right-click and select new > region. Set the Style property to subTabLayout.

    Step 3: Create 3 areas of header in subTabLayout region

    Step 4: Select the region of subTabLayout, right-click and select new > SubTabs. JDeveloper creates a child named SubTabs.

    Step 5: Select the region of subTabBar, right click and select new > link. Set the text property of the link to the label that you want to display in the sub-tab.

    Step 6: Create links plus 2 as per step 5.

    Note: Make sure that the link text and the region header text are the same.

    -Anand

    Published by: T.A.Anand on December 16, 2010 12:58

  • Satellite M30 does not show the connection of the battery after 5 min of use

    Hello

    My Satellite M30 recognize the battery when placed first in and for 5-10 minutes.
    After that the power meter shows I'm on sector without battery. Any advice?

    Anyone know if it is an issue that could be fixed with a new battery, or if it might have something to do with the connection between the battery and the laptop?

    Thank you very much
    g

    Hello

    If the AC adapter is plugged into the laptop that Toshiba Power saver should show a connected adapter. In this case the laptop must not run on battery!
    If you you unplug the adapter icon which appears in the taskbar should move from adapter to battery.

    One question; How old is your battery?
    Usually after several times the battery loses performance and it possible s you will be able to use the battery only for a few minutes. After this period, the battery is empty and needs to be recharged.

    Maybe your battery performance isn't the best right now and it should be replaced. ?:|
    This should be checked permanently.

    Good bye

  • Satellite A100-543: the battery appears dead

    My battery died yesterday after I plugged it to my computer. In fact the computer turn off at this time. A burning smell has occurred and after, I tried to start the computer again and it works but the battery seems dead. When I'm on windows with the battery, it is written that it does not load, but I have my doubts because the computer recognizes that there is the battery.

    So I would like to know if this could be something between the battery and the motherboard that is dead or if I can use my warranty. The strange thing is that other people use the same plug that I used without problem, I think, so that the battery has a problem before.

    Thank you.

    Don t know exactly what's wrong, but it certainly looks like a hardware malfunction.
    The A100 is a new machine and the guarantee must be valid and must cover all the trouble with the material.

    Take my advice and don t spend a lot of time for the investigative measures which could be bad or not.
    Simply contact the ASP in your country and explain the problem guys

    I think everything should be done for free!

  • Why the battery in my MacPro 2012 would be idle?

    I had this macpro 2012 5.1 for about a year. I bought it on eBay. It's a great machine.

    I just removed the side panel to upgrade the video card and noticed something that seemed strange to me. When I took the video card, I noticed below on the motherboard, a battery with a battery in it (the usual type of C - Mos in Windows) support.  But there was a nonconductive sleve of plastic between the battery hold down the arms and the top of the stack (so he couldn't establish the electrical contact.  Someone even took a magic marker and made a scratch on the plastic and the battery itself as it to indicate a point of the range, to the case where someone took battery and and put it back, they would be sure and return the piece of plastic, exactly where she was.

    I obviously was not aware of the shortcomings in the functioning of the Macpro, so what is happening here?  What is this battery? Why would he not connected?  It is a real perplexity.  I have not tested the battery, but I bet it's very good because he has never been active.  I hope someone can explain that. I stopped the installation of my new video card until I got this figured out. I hope someone can help!

    Thank you and Merry Christmas!

    The battery keeps the clock running if the computer has no power.  It is not essential if the computer is connected to the internet, because the operating system can obtain the exact network time every time it starts.  If the computer does not have o be connected to power for a long time, isolate the battery with this piece of plastic will make the battery last much longer.  Now, you are going to use the computer, remove the plastic.

  • HP pavilion dm4: removing the battery / output switch problem

    MY hp dm4 Clubhouse has a switch relese battery does not move and so I can't remove the battery.

    What can I do to take out the battery?

    I was able to remove my battery, even if the trigger will not move

    I have read the documents under the next heading

    "Laptop battery seems to be stuck.

    He pointed out that my problem was very common

    BATTERY REMOVAL PROCEDURE

    As suggested-

    I inserted a piece of thin stiff plastic

    (for example on the size of a credit card but a little thinner)

    in the crack between the battery and the output switch

    I pushed the upper part of the plastic down

    and then I pushed up in the direction of the battery

    up until the crack of batttery widened to the point where I could use

    my nails in the battery of crack to pull the battery.

    I don't have to much force to make

    The angled battery to easily

    BATTERY INSERTION PROCEDURE

    As suggested-

    To avoid the problem of gel battery switch

    Move the latch of the battery in the middle of its sliding range

    When reinserting the battery first tilting the battery

    so that the side of the battery to the side of the computer case

    is first inserted into the battery compartment

    Then push down the other side of the battery in its compartment

    in the end, release the battery button while he spingngs to its normal resting position.

    I hope that this explanation is useful

  • Copy data between the custom dimension members or scenario

    Dear Experts,

    I'm back with my silly question.
    Is there anyone know how to copy all the data (not only entity currency) between members in the custom dimension? Our HFM application has a different type of data because the type declaration (legal and audit). Whenever we arrived with our legal data, we copy our legal consolidated data for verification. We tried to create a formula (using hs.exp) to move data from legal to check, but apparently, this formula should be write inside Sub calculate (). Is not supposed, we do not want to run the copy data every time that the user click on calculate.

    We also perform copy data between the scenario, as actual to Budget. This activity also needs all the data consolidated and final.

    So the condition for the copy of data are:
    -data must be consolidated
    -Copy all the data, including the adjustment

    Is there a formula or a way to copy the data that can be triggered individually (click 1 rules that run only copy data) by the user?

    Thank you very much for your kind response,
    -Anna

    Hi Anna,.
    As you say, you cannot trigger different parts of rules to run in HFM. Instead, you use a condition. In your case this condition might be guided by the management of the process. You can use a combination of GetSubmissionPhase, review status , and ReviewStatusUsingPhaseID functions that returns the current process management level and presentation details: phase. To me, it seems that as soon as you have finished legal, you complete a part of your process cycle and enter another stage of verification. Here are the parts of your publishing process, if you have defined a process in HFM management or not, which means that you should consider using it.

    -Kostas

  • Confused with methods of loading between HP and the battery Level8technology

    Hi all

    I recently ordered a 12 cell Li-ion battery for my Hp dv9310us replace battery Li - Ion 6 cells aging.

    I have been using hp refill that says that very often unload completely the battery by changing the power to "never" options settings so that the laptop stays on until there is no more energy left. Then recharge it back to 100%.

    I bought my new battery company, Level8technology and on their website under the heading battery care and maintenance, they said that for Li - ion batteries should not be left to discharge less than 20% in the opposite case the cells can fail and recharging must begin once, he gets to that or even before no problem.

    I'm confused, with my new battery only a week.

    Any experience in this?

    Thank you

    MS

    I agree with Hüffer.  I went to not allow your battery less than 20%.

    With the old nickel metal-hydride and even older NiCd batteries, it had to discharge and then recharge.

    Still, I learned that this is not necessary with Li - ion batteries.

  • a switch that is part of the battery will charge if it loses connectivity to the master?

    If I have 4 switches configured as a stack - where the StackWise ports are connected within 1 to 2, 2 to 3, 3 to 4 and 4-1. Switch1 is the master.

    If something were to break stack connectivity between 4 to 1 battery still works as switch 4 still has connectivity to control through 3 to 2 to 1.

    Below the output of reference-

    switch #show switch retail
    Switch/battery Mac address: 0023.34b3.5600
    Current H/W
    Switch # Mac address priority Version State role
    ----------------------------------------------------------
    * 1 master 0023.34b3.5600 15 0 loan
    0023.0543.aa00 member 2 14 0 loan
    3037.a6ca.2000 member 3 13 0 loan
    3037.a6ca.6900 Member 4 12 0 loan

    Battery nearby Status port
    # 1 Port 2 Port 1 Port 2 Port switch
    --------------------------------------------------------
    1 low ok 2 none
    2 ok Ok 3 1
    3 ok Ok 4 2
    4 bottom Ok No 3

    switch #.

    With this as the current state 2 reload automatically cause the 3 and 4 to charge because they lose connectivity to control completely or they will stay up as of the individual switches

    And same question again - switch 3 cause reloading will rise 4 to recharge automatically as he lost connectivity to control completely?

    I've seen this happen... so need to confirm if what is expected or we must check and solve another question that might have caused this!

    This is not the expected behavior. A member of the battery is disconnected does not cause other switches to restart. They work as individual switches.

    Cisco documentation:

    An active switch connected to a fully operational
    stack becomes member of the stack. It receives the functioning
    setting up the master of battery
    . When you disconnect a battery Member
    Uh, numbers and port switch
    numbers of the remaining members of the battery
    no change and the switches do not recharge.

    http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3750/software/...

  • I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

    I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

    Hello

    Main differences are:

    • Up to 12 hours of battery life with Powerbeats3, which use chips to W1 Apple energy-efficient (vs. up to 6 hours of battery life with Powerbeats2).
    • A quick charge of 5 minutes for a typical use of an hour (vs 15 minutes to load).
    • Improved ergonomic design.

    More information:

    http://www.Apple.com/shop/product/MNN02LL/A/powerbeats3-wireless-earphones-shock-Jaune

    http://www.beatsbydre.com/earphones/browse-earphones/wireless-earphones/ML8V2.ht ml

  • deterioration of the health of the battery

    Is this normal?

    I have a mac book pro mid 2012 that I recently replaced the battery. The battery has a theoretical capacity of 5770 mAh, with only 9 load cycles, the maximum load capacity is spent at 5301 mAh.

    It worries me because the battery replacement is not cheap and I want to make it last for a long time.

    Installing a third party in a MBP battery is like playing Russian roulette, sometimes you win, sometimes you lose.  Several third-party batteries are prone to early failure, in particular the negotiating those can cost more in the long term than Apple.  To date, based on the experience of former members of ASC and mine, only two brands of third parties, the batteries have shown to be acceptable with Mbps, Anker and NuPower.

    Download CoconutBattery.  It will show you the ability of original battery for a new which can be compared with the results that you are experiencing.

    Ciao.

  • Concerned about the performance of the battery Ipod 6

    Hello!. Please tell me your thoughts on this because I have no idea about. I bought a new Ipod 6 a week ago. I think that the battery is not give the performance of desire. He's dead, and after a charge noticed that drain you very quickly. So I turned off bluetooth, reduces the brightness of the screen and wifi on when I used it. I loaded 100% today, and according to the battery report used for 1 h and 50 min. (audio, videos Youtube Safari 91% Config Kindle of 5%, Home and Lock Screen 3%, 1%), time to sleep 10: 00 and 9 min. and the battery icon displays between 50 and 60 per cent of costs. It is the average or do you think the device is defective? Thanks in advance.

    On the basis of messages as your battery life seems comparable to others. Note that % battery is not accurate on an iPod, then you can not go this way.

    The test is responsible for at least 6 hours and read a video. You should get 5-6 hours

  • Re: Difference between the NB250-108 and NB510-11U?

    Hello

    I have a NB250-108, which was improved in RAM 2 1 (sorry I am garbage to techy stuff) as a friend suggested he could accelerate his top. (makes)

    I had a few years now and the battery is not coterminous with and I have problems with the load as I really need to move the charger to operate so I was wondering if it's time to face facts and instead end up constantly spend on him and end up with broom triggers I should get a newer version?

    Can someone tell me what would be the difference for everyday use between this and the NB510-11U? That is, would it be as fast as my RAM NB250-108 upgraded?

    Please excuse my ignorance, but I am a total novice and only use my netbook for hotmail, ebay etc.
    Thanks in advance

    Jen x

    As I already wrote in another thread:
    Two laptop computers NB250-106 and NB510-11U are just a bit different:

    The NB250 supports 1 GB of RAM, NB510 supports 2 GB of RAM
    The two units seems to be equipped with an Intel Atom processor. Therefore, there is not much difference.
    Display size is the same 10.1

    The NB510 is equipped with a larger 320 GB HARD drive (NB250 supports 250GB)

    To be honest, it was only a difference in RAM.

  • Toshiba excites Pro AT10LE-A-108 the battery

    Hey everybody,

    first of all, I got a Toshiba chance excites AT10LE-A-108 Pro in a common store in Germany.
    Everything was good except the battery won't charge.

    He always showed 0% after plugging the cable it immediaetly turned off and would not turn on without the cable connected.

    Then I got a brand new Toshiba excites Pro AT10LE-A-108.
    I did all the updates, while I was already wondering because the batterystatus switches always between 0% and "full."

    After several hours, I plugged the power cable and the same story the Tablet immeadetly turned off. Yet once, wouldn't turn on without the power cable plugged in:)

    Now its all yours :) It is just bad luck, or is this a common problem?

    What I have to change something in the settings?
    I don't know and I'm not going back again via post :(

    Best regards, Tom

    Hi Tom

    I don t think that it is a case of some incorrect settings.
    To me, it seems that the battery does not charge and from my point of view it s a hardware problem of battery.

    I think you have two options for a fix: you can try to get another new AT10LE-A feature from a dealer or you can contact the maintainer authorized Toshiba in your country for a fix.

    On Toshiba supports support ASP page, you can find the service partner in your country in the region.
    http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

Maybe you are looking for

  • Media converter is not converting

    Try using Sansa Media Converter on a jpg image. I click on "Convert", and some activity seems to happen.  But when it's over, there is no converted image.  There is nothing.  Nothing in the designated destination folder and no change to the original

  • Error code 80242016 Windows Update.

    I downloaded the update of security for internet explorer 9 for windows vista KB2964358 he downloaded 4 times successfully, and then I got another warning on another update when I downloaded it it doesn't have the number of error 80242016 I would add

  • Windows does not start after Windows update.

    Original title: udate Windows vista problems I have dell dimension e520, Windows Vista home Basic, 32-bit SP 2, and in January, I upgraded RAM to 4 GB to 1 GB. McAfee security on the computer. The system worked until the last updated (March 2012).  T

  • Old access portable hard drive which had the windows user password

    My old laptop's motherboard is fried.  I took the hard drive and put in the case of the speaker.  want to access the files on the old hard drive but it was password protected.  How can I get rid of this password or be able to access the hard disk?  T

  • Upgrade Windows 10 is on my home page and cannot stop it.

    * Original title: intrusion and abuse of microsoft Microsoft, who thinks they are. They put 10 of windows on my computer and then it kept popping up all the time. It was the devil trying to get rid of it. Twice I had to get rid of. Now, he is on my h