Disks burned with Windows DVD Maker do not play using a DVD player

Similar Questions

• CD burned in windows Media Center does not play in car cd player

  The cd I burned using windows media center will not play in my car. Says "bad CD". But he does not play in my cd player. I don't understand??

  Thanks for your comments. Unfortunately, I had already done what you suggested before asking for help. It darn anyway :-(  But thanks again

  ==================================
  Just to make sure there is a CD... check Audio (music) the
  Directory by going to start / computer or click
  the drive the drive letter. File extensions
  see you on the CD should be .cda

  Could be a total waste of time, but I think I'll try
  burn an Audio CD (music) with the following free software
  just to see if it might work.

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP, Vista, 7)

  CDBurnerXP to make Audio disc
  http://CDBurnerXP.se/help/audio/compileaudio

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why a DVD recorded from Windows Movie Maker will not play on certain DVD players connected to your TV? How can you fix it so it will play?

  Why not a movie made Windows Movie Maker - do NOT play on some DVD players?  What can I do for the DVD player to allow the DVD to play?

  Hello

  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-DVD-Maker-videos-i-produce-wont-play-on-my/549c3c40-F02C-43b5-961f-6aa121197993

• Windows Movie Maker will not play

  I made a video for a school project. It was published and implemented well enough. I taped a cd, he brought to the school, and the video wouldn't play. How to make it compatible?

  It works that way.
  The video that you have recorded on the CD only plays in your computer.

  So that the video be played in other computers or DVD players, you need to burn video to a DVD using Windows DVD creation.

  Windows DVD creation is included in Vista Home premium and Ultimate.
  If you versio of Vista is not one of the above, you will need to install a 3rd party DVD Maker.

• Sometimes the clips in Windows Movie Maker will not play during preview and not at all after publication...

  Hello!  I just create a movie using Windows Movie Maker (HP Pavilion dv6000/Windows Vista Home Premium).  During the PREVIEW, the first part of the video of my film sometimes will not play (view) while the audio continues. Sometimes he will play (view).  All clips are saved in the right place, the file formats are correct, and everything else that I think is done correctly.  In addition, after the publication of the video, he did the same thing; some parts of the beginning is not playing (see) only the audio.  I believe that this can have started happening after a few times when an error message pops up saying something like "Video player has stopped responding, but has revived with success...» "or something like that.

  Now, I tried a few things to try to fix the problem.  I noticed that if I take the transitions and effects on the clips then they play but every time. I don't know why this happens only at the beginning of the movie and not all of the film since I also have clips with transitions and effects in the end.  Help!  This is my first time using this program/do a movie (and it's really good if I must say for me... he can win an Oscar! * smile *), but I wonder if I did something by mistake at the origin of this problem...

  Signature

  "Confused."

  KW03, I wish allows you to check if the same thing happens with the Movie Maker live, and this will give us an idea of the question of whether it is related to the effects of media player or your codecs. Also test it in another account that the component for WMM store is different on each profile. I've included the steps:
  http://download.live.com/MovieMaker
  (Note that you can select exactly what you want to install once you load the installation process)

  • 1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

    Create a new user profile:

    Follow these steps to create a new account, we can test:

    (To remove the test profile follow the steps above and choose to remove the account from the user accounts).

    If the work of nine and you discover you have a profile corrupted, take the measures listed in the following article to copy your data to the new: difficulty a user profile is corrupted

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD burning with Windows DVD maker

  (1) if I burned the files and folders on a blank DVD-R can burn data another end time or should I burn all the data at once because after burning, I can not burn anything else for the DVD?

  (2) if I burnt data on DVD-R Virgin, can I change it back to blank DVD? Is there a software that can do this?

  (3) which means file system UDF and CDFS on DVD?

  the practical 7Guides site was awesome and I have burned my files on DVD and could burn additional data later after that first engraving was finished. Windows Explorer is a great burner.  I have been using Nero burning ROM with it when I burn data to a DVD, I couldn't burn them later, but it seems that I need tutorial for nero.

  Thank you very much

• When I try to burn a DVD with Windows DVD Maker, he says that the file is not a valid project create DVD file. Why?

  When I try to click on add items in Windows DVD Maker, it will allow me to select a file, then it tells me that the file is not a valid project create DVD file. Why?

  What is the format (extension) of the files of the selection?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

• I try to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I like it's too big - it is possible to use SP, SLP. ED or when burning on a DVD

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  ==========================================
  The following article shows 150 minutes on a single DVD layer, but
  I'd be surprised if it always worked this way. In any case...
  Perhaps you could use a DVD double layer if your burner will handle it.

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Splitting the project between 2 or 3 DVD might be the best option.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem with Windows DVD maker, Windows Vista Help

  I work with windows vista movie maker and dvd maker programs. The premiere of the film looks fine, however, after successfully burn on a DVD - R disc, the selections of chapter on the display of pages 2 and 3 for a few seconds, then the screen goes black for a few seconds, then returns to the chapter selections. How can I solve this problem? Thank you

  Wow! It is a large complex/project... more
  systems would never be able to make that
  in a DVD.

  It is possible that uncheck the filters would be
  improve the question...

  See the section "what to do if you have questions.
  in the following article.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  I'm guessing that you are under Vista Movie Maker 6?
  The only new version would be Windows Live
  Movie Maker and I think most users would
  not to call it an 'Upgrade '.

  Personally, I suggest making small
  projects, or even a first part and a second part on
  two DVD.

  If you save your Movie Maker projects to DV - AVI
  format and when you import within the limit of the DVD Maker
  the total duration of about 1 hour for DVD
  You can have the best video quality.

  See you soon.

• My computer turns off when I try to burn a DVD with Windows DVD Maker__

  My computer turns off if I try to burn a DVD with Windows DVD Maker.  It was working fine and now it will not get past a certain percentage without stop.  What can I do?

  Hello Timbay1,

  Thanks for posting on the Microsoft answers Forum.

  What has changed in your environment, as it was working before and now does not work? Have you installed any new software or updates?
  It can be 3rd party software created a conflict with your codecs and you need to re - register.

  You could check and see if you have compatible Codecs installed in Windows Vista.
  or you can try to use the codec for Vista Codec Pack - pack

  There are other 3rd party codecs but I can't guarantee that they will work with Windows Vista.

  Please answer back with an update.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to capture a video from a home made dvd to use to create a video edited with Windows Movie Maker

  I have a DVD made home to a sporting event that my son has played in. I'm trying to get the DVD video in a file on my PC so that I can use it with Windows Movie Maker. I know how to create and edit a video on movie maker, but I can't seem to figure out how to capture video from this DVD. It is probably a 'rookie' question, but I couldn't find what I needed by using 'help' or 'search', so I hope someone in this forum can tell me how to do this.

  I have a DVD made home to a sporting event that my son has played in. I'm trying to get the DVD video in a file on my PC so that I can use it with Windows Movie Maker. I know how to create and edit a video on movie maker, but I can't seem to figure out how to capture video from this DVD. It is probably a 'rookie' question, but I couldn't find what I needed by using 'help' or 'search', so I hope someone in this forum can tell me how to do this.

  =======================================
  If you're running Vista Home Premium or Ultimate, you can
  be able to import files into Movie Maker directly from the
  DVD... the files you want are in the VIDEO_TS folder and have
  a VOB extension.

  Also... the info is maybe worth a visit:

  DVD Movie Maker 6... in Vista Home Basic
  http://www.Papajohn.org/newsletters/185-DVDtoMM6inVistaHomeBasic.html

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is in, and then select Explorer.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive.

  First... just try to rename one of the. VOB files to
  . MPG or .avi and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video film for editing purposes.

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.
  The following free Converter may be helpful.

  SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster... it is said):
  Mirror download (direct link) (28.1 MB))

  (FWIW... it is always a good practice to create one)
  System restore point before installing new software)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  Now... Drag/Drop your. VOB files in the current field.

  Output container... Choose wmv...

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file is converted, you should find it in...
  Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + T.. o open the Save
  Window and choose a backup folder.

  Good luck...

  Also... try the following free software:

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your VOB files on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Impossible to publish a wswmm on computer or dvd into a video file with windows movie maker, after the edition of a major project

  Impossible to publish a wswmm on computer or dvd with windows movie maker, after the edition of a great project - error message stating "cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again"

  the source files are all there and I have more than enough space... Please help (project video wedding!)

  Thank you thank you thank you...

  chop my project and publish it on computer, mix files together on the creation of dvd windows... it worked!

  you saved me break my laptop into 1 million pieces... thank you once again!

• film on windows Movie maker is not compatible with windows live movie maker

  My sister made me a video with Windows Movie Maker and I have Windows Live Movie Maker, and he says that is not fully compatible.  Please help, his computer crashed and there is a video of my twin nephews has done for me.  There are currently on a USB key.  I'll do something to make it work.  It was during the last two years of their lives with me and I live 16 hours away from them.  Any suggestions would be greatly appreciated.

  Thank you

  Mary

  Thank you for your response.  I have Windows 7 and I have windows live Director 2011. When I plug in the USB, it says that the file ext is MSWMM

  Any information you have would be so appreciated.  Thank you very much

  Mary

  =========================================
  . MSWMM is not a video file... it's a project file
  Movie Maker XP or Vista Movie Maker 6. It is more useful
  for a re-release in Movie Maker on the system, it was created
  sure if you have copies of all the original source files...
  (Photos, video Clips, Audio Clips)...

  Ask your sister to save the project in the. Film WMV
  format, then send the. WMV file to you. You could
  who discovered in Windows Media Player.

  Here is some info on the savings that can be useful to your sister:

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Windows VIsta Movie Maker 6...
  The following article offers information on editing
  (save) in a film format that will play in
  Windows Media Player and can be shared.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

• How to finalize a DVD burned with Windows Explorer?

  Burned a DVD-R with photos (text as a .jpeg image).

  You will need to complete to play with a DVD player on TV.

  Thank you

  Andrew

  Windows Help:

  1. In Windows Explorer, click the disc burner drive, and then click close session on the toolbar.

     The session will be closed, so the disc can be used on other computers.

• How to change a file that is compatible with Windows Movie Maker? I have .webms, and those who are not compatible.

  Trying to complete a school project, all Web sites have huge watermarks covering 1/4 of the video. Thought Movie Maker moght help, but none of my Webms are compatible with

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you are trying to achieve a school project in Windows Movie Maker and I'll be happy to answer your query.

  From now on, I would like to ask to refer to the advice given in the article below and verify the information.

  Can what types of files I use in Movie Maker?

  See also: getting started with Windows Movie Maker

  I hope this information is helpful and good luck for your project.