Display buttons in a region report only if there is data in the report

Similar Questions

• LabVIEW backup only 2 seconds of data in the file

  Sorry for this question of beginner, but after a few hours of searching for an answer and trying to solve the problem, I still can't understand.

  I use a DAQ Assistant vi, displaying the data on a chart in waveform, and to help to write it into a file as vi to try to save the data I collect (this is a while loop). A .tdm file is created successfully, but only about 2 seconds of data (25 k samples) are saved in the file. In addition, I write custom vi set to 'Add '.

  I need to save the data for the duration of my collection (between 2-20 min).

  I'm sure the solution is brutally simple, but any help would be greatly appreciated.

  Thank you!

  surffl wrote:

  Yes, I use the importer of CT in OpenOffice as provided for by the regulation.

  Do you trust to OpenOffice?  What do you get when you use the importer with MS Office?  I don't think you have a problem with your VI, but a problem with the importing program.  LabVIEW is certainly save more than 1 second of data in the file.  I thought that after each section headers might have caused and the file reading problem, but if you say settting it only write a header still causes problems with importing the data, I think that the problem comes from the importer.

• Display the field calculated only when there is data

  Hello

  Is there a way to display my value only when the data entry field is used. For example, if I have several fields aligned vertically, I don't want to display a bunch of zeros if their data fields are not used.

  Thank you!!!

  You must write the script in the event of Field2 Calculate.

  The value of the FormCalclanguage.

  if(numPeople.RawValue ne null) then

  numPeople * 12

  endif

  My previous answer shows 2 ways to write the same script. A FormCalc and other JavaScript...

  Thank you

  Srini

• Language display button became unavailable after update

  Language display button became unavailable after update

  Hello!

  I use the Russian version of the HTC sense XE. After the last update button, triggering languages of entry become unavailable. So I can't type on my Russian servers.

  Someone knows something about this problem?

  My PocketCloud's Pro version.

  Max, St. Petersburg, Russia.

  Once again my apologies, we still don't officially supported the Russian language with our application. =\

  Josh Maurer
  Visit our web site books and the Knowledge Base at pocketcloudsupport.wyse.com
  

• Display button CREATE only if SQL Report (form report) contains no data.

  Hello
  
  I have a created a form with report (page 1 & 2). By default, APEX creates all the buttons.
  I want to display the button CREATE in the SQL report (page1) only if there is no data, if the report shows a line, I'm not display button to CREATE.
  
  Is there any way I can store (returns the value of the report) *... no data found... * as flag '0' to a certain place and then use the CONDITIONAL DISPLAY for the button CREATE based on this indicator.
  
  Thank you
  Deepak

  Hi Dan,.

  I think that these substitution strings are there to custom paging purposes - but this particular one (#TOTAL_ROWS #) is useful for this sort of thing.

  Dembélé - Sorry, just reread your post and saw that you only want to display the button when there is no line!

  Button attributes to the button, put:

  ID="P137_TEST_BUTTON" style="visibility:hidden"
  

  and in area foot region, put:

  <script type="text/javascript">
  if (#TOTAL_ROWS# == 0)
  {
   $x('P137_TEST_BUTTON').style.visibility = "visible";
  }
  </script>
  

  OTN workspaces are down now (again!), so I can't update my example page - but, I hope, you should get the idea of this

  Andy

• No additional text region report view report items below details

  I have a report based on EMP which displays EMPNO, ENAME and JOB and two text items disabled in the report area above the report. When the user clicks a row in the report these text elements are filled with the additional information of the date of HIRING and SAL for the selected employee. Layout below.
  
  HireDate February 20, 81
  SAL 1600
  
  Job name empno
  7698 SMITH CLERK
  7499 ALLEN SALESMAN
  
  What I want is for additional information (hiredate, sal) to display below the State lines.
  
  Note that I can't put these extra fields in a separate under the report area as the ratio in the region is a region of Hide and show. I tried the separate region approach by changing the report model to lose the table end tag at the end of "after rows', it seemed to work until I pressed Next on the report and then second region had not at all.
  
  
  Details of the page: -.
  
  HTML Page header - has the function
  
  function selectEMPRow (phiredate, psal)
  {
  $x('P9002_HIREDATE').value = phiredate;
  $x('P9002_SAL').value = psal;
  }
  
  
  Page in the region of report items
  P9002_HIREDATE - text field (disabled, only records do not state)
  P9002_SAL - text field (disabled, only records do not state)
  
  
  Region report
  definition
  (SQL query)
  
  SELECT
  E.EMPNO, E.ENAME, E.JOB,
  E.MGR, E.HIREDATE, E.SAL,
  E.COMM, E.DEPTNO
  OF EDP. EMP E
  
  Model UI - hide and show the region.
  
  Attributes
  All columns defined to display
  Report template - P9002_EMP_ROWTEMPLATE.
  
  Custom Report Template P9002_EMP_ROWTEMPLATE.
  Model name column Type (model line)
  Model - Standard class
  
  Model of line 1
  < tr #HIGHLIGHT_ROW # onclick = "selectEMPRow (' #HIREDATE #',)"
  #') ; ">
  < class td = "t15data" > #EMPNO # < table >
  < class td = "t15data" > #ENAME # < table >
  < class td = "t15data" > #JOB # < table >
  < /tr >
  
  Front of the lines
  < table class = "t15standard" summary = 'Report' >
  < class th = "t15header" #ALIGNMENT # > employee no. < /th >
  < class th = "t15header" #ALIGNMENT # > name < /th >
  < class th = "t15header" #ALIGNMENT # > job < /th >
  
  After the lines
  < b >
  < td colspan = "99" class = "t15afterrows" >
  < span class = "left" > EXTERNAL_LINK # CSV_LINK # # </span >
  < style table = "float: right;" text-align: right; ' Summary 'pagination' = >
  #PAGINATION # < /table >
  < table >
  < /tr >
  < /table >
  
  Published by: Pete @ LSC on January 6, 2010 01:18
  
  Published by: Pete @ LSC on January 6, 2010 01:22

  Hello

  Did you try to place your report point of view "Page Template Body (2. (Les éléments ci-dessous le contenu de la région) '?

  BR, Jari

• Creates "shared region report" possible?

  Hello
  
  I have several pages, which all have the same SQL report with where different clauses. Difference in the where clauses are only differences of the value of the variable binding.
  
  I would like to reuse the settings of the regions a report - selected columns, column, column etc. header text sortability - for all these pages. How could I proceed, for the region, I can't Maisons a component shared.
  
  TIA.
  
  Tamas
  
  Published by: Tamas Szecsy on July 31, 2009 01:19

  Tamas

  You can create the page using PL/SQL once returning the SQL query, and then have an iFrame or region report AJAX on every page that displays the report he and underlying predicates.

  There is an example you can mess with on my blog and I'll explain the iFrame approach if you want to...

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

• In the forum Coursera pages there are different icons and buttons, but I see that only holders of palce, small squares with letters in there. Any help?

  In the pages of the coursera.org forum, there are different icons and buttons. They do not display correctly. I can see only tiny forms square with characters in them. Hovering on them can display information in some cases, but it is not very convenient. Although they recommend Firefox, I use Chrome instead. Chrome has no questions here so far. Is it possible to view these icons correctly?

  Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

  (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

  "3-bar" menu button (or tools) > Options > content > button "Advanced".

  Here you must "allow pages to choose their own fonts.

  (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

  • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
  • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
  • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

  This seems useful.

• Apex 4.2.5: Problem with region report width to 100% in 26 theme

  For one of my interactive reports, I chose the width 100% region report, but it is not displayed in full width on my computer screen portable 16:9.

  Y at - it no additional parameters to fix?

  Other areas of work.

  Kind regards

  -Wilfried

  Depends on the parent area / page.

  Do you know if the content inside a table? If so, check the width of the td tag.

• the SQL for apex 4.2 with 'apex_item.text' region report renders incorrectly

  In the APEX 4.2 page, I created region "report data.
  
  Type = "SQl query".
  
  'User interface'-> 'Template '=' area of reports.
  
  "Area Source 'is' select apex_item.text (1, '111') as double c1".
  The select query is actually much more complex, but generally simplified it is such, that it uses the function "select apex_item.text" construction HTML textfield.
  
  If I run in query Sql Developer
  

  select apex_item.text(1, '111') as c1 from dual;

  Then it results in:

  <input type="text" name="f01" size="20" maxlength="2000" value="111"  />

  But in APEX 4.2 the report is rendered thus:
  

  <td  headers="c1">&lt ;input type=&quot ;text&quot ; name=&quot;f01&quot; size=&quot;20&quot; maxlength=&quot;2000&quot; value=&quot;111&quot;  /&gt ;</td>

  ("for this forum poster correctly I had to put extra spaces between ' ' & gt ' and ';' and so on)
  
  And APEX 4.2 shows ugly html inside the cell of report/slot for me, showing characters/symbols ">". The reason is that APEX source HTML of the page has no symbol ">" but has "' & gt; '."
  
  The APEX 3 I have a similar query works fine, without such an anomaly.
  
  What attribute should I change in APEX 4.2 region to display the result of my query as needed?
  
  I need this 'apex_item.text' function, I can't remove it.
  
  Published by: CharlesRoos on 13.02.2013 15:28
  
  Published by: CharlesRoos on 13.02.2013 15:29
  
  Published by: CharlesRoos on 13.02.2013 15:29

  CharlesRoos wrote:
  In the APEX 4.2 page, I created region "report data.

  Type = "SQl query".

  ' UI '-->' model '=' area of reports.

  "Area Source 'is' select apex_item.text (1, '111') as double c1".
  The select query is actually much more complex, but generally simplified it is such, that it uses the function "select apex_item.text" construction HTML textfield.

  If I run in query Sql Developer

  select apex_item.text(1, '111') as c1 from dual;
  

  Then it results in:

  But in APEX 4.2 the report is rendered thus:

  < ;input type=" ;text" ; name="f01" size="20" maxlength="2000" value="111"  /> ;
  

  ("for this forum poster correctly I had to put extra spaces between ' & gt' and ';' and so on)

  And APEX 4.2 shows ugly html inside the cell of report/slot for me, showing characters/symbols ">". The reason is that APEX source HTML of the page has no symbol ' > ' but '& gt;'.

  The APEX 3 I have a similar query works fine, without such an anomaly.

  What attribute should I change in APEX 4.2 region to display the result of my query as needed?

  Make sure the column attribute display as for column C1 is Standard report column.

• show 2 regions report (subregions) side by side

  Hello
  I need to create a page with 2 regions report classic side by side.
  My problem is that these regions are subregions in another area, so I can't fix the display on 1 or 2 column.
  
  What can I do?
  
  Concerning
  Siegwin

  I'm not laughing you ;)

  I thought that * .rounded-corner-region * was one of your own class, but it seems that it is a default ApEx class. So you can change it in apex_4_1.min.css if you have access to, or you can simply override the class by wrtting * .rounded-corner-region {float: left; clear: none ;} * in your page header (it must appear after the call to apex_4_1.min.css in the code).} But as I said he's going to change all the items that use this class.

  So the best way is to create your own new class, for example * .float-left-region *, identical to * .rounded-corner-region * but with float: left; instead of clear: left; :

  .float-left-region {
       float: left;
       display: block;
       margin: 0;
       padding: 0 0 9px;
  }
  

  You can write write this code in a CSS file or directly in you page header.

  Then in your report model, use the class float-left-region instead of rounded-corner-region.
  The sum of the width of your report must be less than the width of the parent container if you want them to be displayed side by side.

  I have created a new model for left float model in the region and a new class + .float-left-region + (defined in the header of your page) in your workspace to test, you can take a look.

• Data of the interactive report not displaying on the edit form.

  I have an interactive report that contains 3 rows. When I click the button change beside one of these lines, the edit form displays the data in this row.
  But when I click the buttons edit beside the other 2 rows of report, I receive an error message that indicates: "ORA-01403: no data found." Error line could not.
  
  I don't see why this is happening. The pharmacokinetics of the table involved is 'Date of application', so 'Column link' report is sent the value "Request Date" to the P54_Request_Date element in the page of the form.
  No idea why this would work properly for one of the lines report but not for the other 2?
  Obviously, each of the lines report must have a value for the PK, then why the form would not be able to find the same line that displays the report? Is this a problem with the process of "line of" form?
  Thank you.

  Hello:

  I'd know it before. The date format default for your application, as shown in the following debug output is DD-MON-RR
  >
  0.35:... "NLS: decimal separator Set =". »
  0.35:... NLS: Set NLS Group separator = ",".
  0.35:... NLS: Date Format Set = "DD-MON-RR.
  >

  So, it means that the part of time to a date column is never taken into account when matching a date field. You can change the default date of the application format (shared components-> change the attributes of the globalization) and the value is in the format that you specified for the column in the report (DD-MON-yyyy hh24miss). It will then do the ARF in the process of work correctly without the need of the value of the page element that contains the column of the massage table. However, the change may affect other pages in your application that may depend on the date is in the format "DD-MON-rr.
  You can try this workaround.
  Remove the header before process you added for re - format the value PK-item page
  Define a process lower than the RFA process before header with a sequence
  Set after a bidding process with a sequence that is lower than the process of automatic line (DML)
  Use the code below for each new process

  execute immediate 'alter session set nls_date_format=''DD-MON-YYYY HHMISS''';
  

  CITY

  Published by: city has 16 Sep, 2009 17:18
  Correction of errors in the date formats

• How to display data in the interactive report without colon (:)) column

  Dear gurus of the Apex,
  
  I am a beginner and you just create an application for the Apex of a worksheet. I created a list of named values and used in a box against a field in the page creation form default 3.
  
  When I selected several values in my box on the form, the data in the interactive report appear as a single line with a colon separating the values selected as follows: dog: Cat: bird
  
  What I would like is to have the data appear in the interactive report in a list like this multiline column:
  
  Dog
  CAT
  Bird
  
  I can work around this problem by modifying the SQL code in the Source region of the definition of the area of the report (interactive 1 Page by default) to replace the semicolon by < br >
  
  SELECT replace ("PETS_CHOSEN", ":","< br / > ')"PETS_CHOSEN", OF"MYAPP"Note: this is not format correctly in the display. I have replace the colon with a html br
  
  This works, but there seems to be a hack to me. I guess I missed an option simple setting somewhere, but I can't.
  
  The other problem with this solution is that when I export the report to Excel, that ship's dog < br > cat < br > Bird, which is seems worse than the colon.
  
  Thank you
  
  -Morgan
  
  Published by: mnrussel on February 16, 2009 04:13

  Hi Morgan,.

  I think you have at least two possibilities:

  1. replace the colon with "," (comma and space) - kind of reasonable on the screen and export

  2 create a second page that has the same report but use it "export: csv" model. Create a manual link to this page to replace the standard export binding. When these pages of the report are requested, they download immediately instead of display. So you can use commas in this one and < br > tags in the report to the screen version

  Andy

  ch - to display the tags in a post, use and lt; for < and & gt; for >

• Creating a pop-up window of a button in a region

  Hello.
  
  I created successfully a pop-up window by region position a button by specifying a target URL
  of javascript:popUp2('f?p=&APP_ID.:12:&SESSION.::NO',_200,_200); in the URL redirection option
  section of the button. (Brings up page 12. Works as expected.)
  
  I can't get the popup to work for a button in the same region. I created a button in a region.
  I created a Page of treatment branch specification of a type of the target action: URL and
  Target URL: javascript:popUp2('f?p=&APP_ID.:12:&SESSION.::NO',_200,_200); and a condition
  of when you press the button: P11_Test_Button. By clicking on the P11_Test_Button
  product a Page cannot be displayed with a cannot find server or DNS error.
  
  Thanks in advance for the help...
  
  Kurt Miller

  I think that something like the code below in your text/selection 'Post text element' element should be sufficient:

   

  JMcG

• Display of training "open goal" app to view 3 numbers at the time. Now, there are only 2. Why apple changed the display of training app?

  Display of training "open goal" app to view 3 numbers at the time. Now, there are only 2. Why apple changed the display of training app?

  Hello

  If you prefer to see your distance goal, the calories or the time displayed as a number instead of as a ring of progress:

  -On your iPhone, in the application of Eve, go to: Watch My > Workout - turn on show metric goal.

  More information:

  Use of the workout on your Apple Watch - Apple Support