display data in the order of the CSA

Similar Questions

• Unable to display data for the date where there is no entry in the table

  Hello
  
  I need a urgent, described below:
  
  I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
  (Please ref. The table with data script as shown below)
  
  Now, if I run the query:
  "select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
  It then displays the data for the dates there is an entry in this table. But it displays no data for the
  date in which there is no entry in this table.
  
  If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
  sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
  But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
  « 0 ».
  
  Y at - there no way to get the result I need?
  
  Please help as soon as POSSIBLE.
  
  Thanks in advance.
  
  Create the table script that contains data:
  ------------------------------------------
  
  CREATE TABLE SALE
  (
  NUMBER EMPNO,
  NUMBER OF SALE_AMT
  DATE OF SALE_DATE
  );
  TOGETHER TO DEFINE
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  COMMIT;
  
  Any help will be necessary for me
  
  
  Kind regards

  WITH tab AS
    (SELECT TRUNC(sale_date) sale_date,
      SUM(sale_amt) total_sale
       FROM sale
     GROUP BY TRUNC(sale_date)
     ORDER BY 1
    )
   SELECT sale_date,
    NVL(total_sale,0) total_sale
     FROM tab
     model
     REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
       dimension BY (indx)
       measures(daysdiff,minsaledate)
     main main_model
     dimension BY (sale_date)
     measures(total_sale)
     RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
     ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
  ORDER BY sale_date
  

  using a clause type

  Ravi Kumar

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian

• CVI control to display data in the command line

  Hello

  do we not have any command CVI to view specific data in cmd (command) invites?

  A simple printf will display the data in the window of standard I/O, more or less what you are looking for, then that scanf accepts and elaborate user entered this window.

  A bit of personalizatio to the standard window of I/O is allowed per SetStdioWindowOptions () command: this command is a sample program (userint\standardio.cws) that shows an interaction with the window.

• Timekeeper group does not display data from the former employee

  When you set up a group of timekeeper, we cannot find any former employees.

  If a employee leaves mi period... and if the timekeeper may not display former employees, how would (s) he enter/edit data?

  
  

  Thank you

  Alex
  

  Hi Alex,

  Yes, the final processing date should be later or null if you are not allowed to change the date of the final trial and you can try to change the date of entry into time guardian Group screen for before January 31, 2016 "and find the employee. "

  Kind regards

• Error when displaying data in the subregion of the tab

  Hello

  I created a page customized OPS with three tabs

  1. Details of the device
  2. The user privileges
  3. Graph models

  Under "User Privileges", there is a summary page that displays all the details of user records. When the user clicks on "Update" icon control is delegated 'Updated Page'. The title of the page was updated, I have two tabs

  1. Devices of
  2. Organizations

  Initially the data of the selected user loads successfully but when I click on the tab 'Organization' I get all the registration of the user instead of the record of the selected only user.

  I debug the code and found that when I click on the tab 'Organization' the User_ID become zero.

  How to handle this?

  Thank you and best regards,

  Ajay Sharma

  Hi Ajay,

  Whenever page on the browser, PR method is called, as your method live inside the PR (processRequest), you must

  move the ID to define where clause, you can use the variable session to capture value.

  Just google with 'Variable of Session the OPS' you will find a snippet of code, let me know if you need any additional input.

  Kind regards

  Had

• non-existent display data through the union in obiee answers

  Hi all
  
  Someone has tried to use the fake fact table to display non-existent data in the MDB at layer where there is hierarchy of dimension tables? If I remove the hierarchy of dimension tables, then I can display all records using the column of the fake facts table which has Cartesian joins with dimensions. Is there a work around for this issue?
  Thank you
  
  Sushil
  
  Published by: 872073 on May 13, 2013 10:25

  Try these
  http://bidirect.blogspot.com/2012/02/data-densification-in-OBIEE-1011g.html
  http://gerardnico.com/wiki/dat/OBIEE/densification_repository

  Published by: Srini FATIMA May 13, 2013 13:00

• How to display data when the page loads

  I use JDeveloper/Oracle ADF 11.1.2.3.0.
  
  I have a jsf with a table page that was built by a named query. I chose the research with the table option when you drag the query named on the page.
  
  The named query uses a connection variable which is not set with the loading of the page. Therefore, no data is display even if the query is executed.
  
  But, I can then click on the button Search and display of the data.
  
  I tried to set the default value of the variable binding '%' in the OV, but that did not work.
  
  So, is it possible that I can get all the data displayed when the page is loaded. Perhaps by the calling program the by clicking the search button?
  
  Thanks for your help.

  Open the criteria to view that you defined in the t for your group, "indication of interface user" tab and check the box 'automatically interrogate. "

  Timo

• Table does not display data when the page is loaded.

  Hi all
  
  I am using jd 11.1.1.4
  
  I have an adf Table in my web page created from a VO and a query pane to find the table,
  When I initially loda page table shows all the lines, but when I press the search button in the query Pereira, the table displays lines.
  I want the data in the table shows that when the page loads, pls tell me how to do this.
  
  Thanx

  Hello

  Try to set the option to refresh on the iterator in the PageDef to "always."

  Or add the pageDef ExecuteQuery method and add an invokeAction to your executable files.

  Kind regards
  Stijn.

• Display data in the report to pl/sql

  I need to display data in a report using pl/sql.
  
  The structure of the table would be fixed, but the data it would come from a pl/sql.
  
  Is this possible in Apex 3.2.1 for that? If so, how can we do this?

  Hi Hozy,

  As much as I know APEX report cannot manipulate the slider.

  If the options are:
  1)
  Try the PIPE...
  http://www.databasejournal.com/features/Oracle/article.php/2222781/returning-rows-through-a-table-function-in-Oracle.htm

  (2) as has said Roel, complete apex collection using your ps/sql and use it in the report.

  Kind regards
  Shijesh

• Display data from the database in a table

  Hello
  
  How to display data from my database in an ADF table using a backing bean? I created an arraylist in the bean, but only the last row of my query is displayed in the table...
  
  Thank you...

  Hello

  Create a simple Java class that implements Serializable. Create attributes that represent each column in your table. This class represents on the row of your table. A list of these objects, and you can fill your af:table.

  Visit this link below for an example.
  Re: Is it possible to create a static array of ADF and the tree?

  Kind regards
  Amélie Chan

• How to display data in the interactive report without colon (:)) column

  Dear gurus of the Apex,
  
  I am a beginner and you just create an application for the Apex of a worksheet. I created a list of named values and used in a box against a field in the page creation form default 3.
  
  When I selected several values in my box on the form, the data in the interactive report appear as a single line with a colon separating the values selected as follows: dog: Cat: bird
  
  What I would like is to have the data appear in the interactive report in a list like this multiline column:
  
  Dog
  CAT
  Bird
  
  I can work around this problem by modifying the SQL code in the Source region of the definition of the area of the report (interactive 1 Page by default) to replace the semicolon by < br >
  
  SELECT replace ("PETS_CHOSEN", ":","< br / > ')"PETS_CHOSEN", OF"MYAPP"Note: this is not format correctly in the display. I have replace the colon with a html br
  
  This works, but there seems to be a hack to me. I guess I missed an option simple setting somewhere, but I can't.
  
  The other problem with this solution is that when I export the report to Excel, that ship's dog < br > cat < br > Bird, which is seems worse than the colon.
  
  Thank you
  
  -Morgan
  
  Published by: mnrussel on February 16, 2009 04:13

  Hi Morgan,.

  I think you have at least two possibilities:

  1. replace the colon with "," (comma and space) - kind of reasonable on the screen and export

  2 create a second page that has the same report but use it "export: csv" model. Create a manual link to this page to replace the standard export binding. When these pages of the report are requested, they download immediately instead of display. So you can use commas in this one and < br > tags in the report to the screen version

  Andy

  ch - to display the tags in a post, use and lt; for < and & gt; for >

• Display data in reverse order.

  Hi everone,
  
  I'm dispalying two fields in forms 10g to display Arabic and English chracters.
  It will correctly display Arabic and English data, but for some Arab data, he demonstrated in the reverse order.
  
  How can I solve this?
  
  my location is
  11.2.0.3.0, charcterset AR8MSWIN1256 Oracle database
  Server of applications Oracle 10 g, NLS_LANG = AR8MSWIN1256
  Order Developer suite 10 g
  
  
  Thank you
  Omer

  I got there is character '_' chr (220) in the folder that is not Arabic characters is why oracle does not display data correctly. I have replace the data as replace (Field1, chr39). Chr (220) | Chr (39)) and now it works for me.

• Display data in the form of values separated by commas - need help

  Hi all
  
  I have some data formatted in the way below. The ID of the drug are the primary keys of the table and the first 9 digits in the drug ID are the same. They can be separated based on the last two digits.
  
  Type of drug drug ID
  00603107554 respiratory
  00603107556 cough and cold
  Antitussive-00603107558
  
  
  I want that data to be formatted as
  Type of drug drug ID
  006031075 respiratory, cough and colds, Antitussive
  
  I want to cut the last two characters, and format data. And the types must be displayed in the form of values separated by commas. Can someone help me?
  
  Thanks in advance
  
  Rambeau

  WITH t AS (SELECT '00603107554' Drug_ID, 'Respiratory' Drug_Type FROM DUAL
             UNION
             SELECT '00603107556', 'Cough and Cold' FROM DUAL
             UNION
             SELECT '00603107558', 'Antitussive' FROM DUAL)
      SELECT Drug_id, SUBSTR (SYS_CONNECT_BY_PATH (Drug_Type, ','), 2) Drug_Types
        FROM (SELECT SUBSTR (drug_id, 1, LENGTH (drug_id) - 2) drug_id,
                     Drug_Type,
                     ROW_NUMBER ()
                     OVER (PARTITION BY SUBSTR (drug_id, 1, LENGTH (drug_id) - 2)
                           ORDER BY Drug_Type)
                        rn
                FROM t)
       WHERE CONNECT_BY_ISLEAF = 1
  START WITH rn = 1
  CONNECT BY PRIOR rn = rn - 1 AND PRIOR drug_id = drug_id
  

  DRUG_ID     DRUG_TYPES
  006031075     Antitussive,Cough and Cold,Respiratory
  

  just a note, I wonder if blushadow could consider adding techniques agg string to its very useful faq section because it seems a good
  request.

  Published by: pollywog on April 14, 2011 06:42

  Published by: pollywog on April 14, 2011 06:43

• Display data in the graphics pop-up window

  I'm trying to display continuous data in a graphic pop up. When I press a graphic button should pop up and show all the previous values as well as those generated at all times. If possible, I want to do this without the use of global or local variables. This question was asked before too http://forums.ni.com/ni/board/message?board.id=170&message.id=315949&query.id=9049787#M315949 , but I was unable to understand the proposed solution. I am a civil engineer, means that it will be difficult for me to understand advanced concepts and sometimes even simple concepts related to computer programming.  I have attached two screws just to illustrate what I'm doing.

  Thank you

  A few tips:

  • The Subvi should be placed in the case of timeout since it is the only place where it is to be used.
  • You have no need to convert a DBL to subtract the timestamps. Works of operation subtraction with timestamps (it is polymorphic) and give you a DBL. This allows you to eliminate a certain number of operations.
  • In the Subvi, rather than using a property node to hide the control (which is executed whenever you call the VI), simply hide the control by double-clicking on the terminal on the block diagram and selecting "Hide control". You can also set the 'Visible' property by right-clicking on the control, and then select Properties. Or, you can simply resize the Subvi front panel so that the control is disabled on the side.
  • The tunnels off events are initially set to 'Use default if Unwired'. A Boolean value, that would be wrong. So, just to have the Stop_Program case were in fact a real constant wired to the tunnel. All others can be disconnected to the left. The "use default if Unwired" is something to both good and bad. On the one hand, it can identify missing wiring if you leave this off, so you can catch situations where you do not generate data in a briefcase when you should. In this case, however, it is perfectly safe.