Display non-retine PSD?

Similar Questions

• Version non-retine showing on the retina of the Mac with the latest version of Skype

  Version non-retine showing on the retina of the Mac with the latest version of Skype

  

  Who did it! Thank you very much!

  Any ideas on how that could have been triggered?

• Questions about Macbook Pro mid 2012 (Non-retine)

  Hi all

  I think to buy my second MacBook.

  Currently, I have a MacBook Air mid 2013.

  It's screen/flash storage is a little on the small side for me.

  Then I watched www.apple.com/benl and sought an Apple laptop that fits my needs.

  And I fell on the MacBook Pro Non-retine (bottom of the page for MacBook Pro)

  So my questions are:

  Estimated life: it will last at least 2-3 years with what I'll do with it. (Read below for my needs)

  It will be always fast enough, there is no need to be fast, but the average speed is necessary (startup time doesn't really matter unless it's longer than 5 minutes).

  How long he will be out of date it will get most recent OS X updates for couple preferably 2-3 years.

  Is it possible to perform the following operations on this MacBook Pro (my needs):

  Some games like: GTA V (on lowest settings), Borderlands, Minecraft, Euro Truck Simulator 2,... (GTA V is working on my MacBook Air but must run from external HARD disk).

  Run Windows 7 in BootCamp.

  Surf the web

  Watch YouTube videos in 1080 p/720 p

  Basic PhotoShop

  I'm not going to do things:

  Edit video.

  Record Gameplay videos.

  Should what configuration I:

  Cheaper, configuration of stock or choose for Core i7 and 8 GB of RAM I don't need an SSD (it's small, expensive).

  I "need" core i7 and 8 GB of RAM or only 8 GB of RAM or only Core i7, just stock or stock with 8 GB of RAM.

  Thanks in advance!

  The environment welcome Sven Missorten

  AKA TheGamer3399

  You can watch in Macs, refurbished Apple . These are like new only to an economy and you might find a slightly more than the current date to run Windows 7 in Bootcamp. A mid-2012 will take place in Windows 7 in Bootcamp. I bought 3 Mac (Mac Mini, 2 - MBP retinas) in the past and have never had a problem. They carry the same warranty that any new Mac. I think that any Mac you buy is easily past 2-3 years with what you want to run.

  In the list of the things you mentioned, if you get a 2015 model, you will not be able to run Windows 7 in Bootcamp. You pouvez run it in a Virtual Machine like Parallels Desktop 11. I have a retinal model of 2015 and Bootcamp can only setup for Windows 8 and more. So, I run Windows 7 and 10 in a VM using Parallels Desktop. Personally, I would not run any graphics intensive games on your laptop, but you certainly can if you don't mind hearing that run the fans.

  Certainly, 8 GB of RAM (minimum) with a 256 GB or larger SSD drive. You can do what others are doing and future proof your Mac by getting 16 GB or RAM. Current models have bus PCIe for flash storage and it's fast! I had a late 2012 with flash SATA storage retina and my current 2015 beginning with PCIe is much faster. Insofar as an Intel i5 or i7, it's really you. With what you mentioned, the i7 would probably be a good choice.

• Versions non-retine and retina do not match

  I am running Adobe Photoshop CC 2015 on a MacBook Pro of the retina and a former non-retine MacBook Air. They run both version 'later' (confirmed in the Cloud creative toolbar). However, they have different version numbers:

  The older MacBook Air runs a newer version: 2015.1.2

  The new MacBook Pro running a previous version: 2015.0.0

  I wonder why they don't match and if this can create compatibility issues later. I can tell only so far that the chrome of the user interface is different, I don't think that there is something significantly different in functionality.

  Sometimes you will need to log out of the application of CC desktop and log back in to the 2015.0.0 and see if you have updates available. It should be 2015.1.2

  I have a macbook non-retine.

  Gene

• display: none behave strangely.

  Hi all
  
  I have 5 columns, column1, col2, col3, col4, col5 in a PivotTable
  
  I use CSS style formatting-display: none for only col2 and col 4 in a pivot table so that it must show subtotals only for columns. rest of the columns should appear normally.
  
  But when I add CSS style disply: none in Col2, COl 4
  
  I see that all the Col3 and col5 also take the same property... I don't see that subtotals for Col3 and Col5 too which shouldn't be the case.
  Any ideas?

  Sigma sigin on PivotTable-> Format values-> text-decoration: none;
  For the column using the style css: color:rgb (242,245,249); or use display: none;

  or check my comments to these posts
  Re: hide detailed and just show the total amount, large
  Re: Display values only total online

  If help pls mark as correct/good

• Still capable of producing non-Retina iPhone folios?

  I've just been setting up my app details in iTunes and it only gives you the ability to upload screenshots of 4-inch retina, retina of 3.5 inches and iPad. Is that mean that if I submit an iPhone non-retine app (built in 480px x 320px), it will be rejected?

  Retina iphone apps will still work on older ones, non-retine iphones? If so, you would say I just create my application in the retina of 960px x 640px resolution?

  Thank you

  Only a record of 480 x 360 will appear on an iPhone 3 g. The folio of retina will appear not on the 3GS in the same way that a HD 2048 folio does not appear on an iPad to SD.

  Check the dimensions of the iPod Touch. The 3rd generation iPod is 480 x 360 (like the iPhone 3GS). The 4th generation iPod is 960 x 640 HD (like the iPhone 4S). The 5th gen iPod is 1136 x 640 HD (like the iPhone 5).

• SSD non-retine 13 "2012 woes

  I have a MBP mid-2012, i7, 16GB. Try to replace the hard drive with an SSD. I used Carbon Copy Cloner to duplicate the mechanical HDD to the SSD, and she starts once; After that, I get a gray screen for a long time (more than a minute), then the circle-slash signs sparkles with occasional of the Apple logo. That's what I tried (all these steps except the last several times):

  -Boot from a disk external and launch disk first aid. Certificate of good health.

  -Start on the recovery on the SSD partition (fails with the same symptoms above)

  -Start Internet recovery and run disk first aid. Get the files in the EFI system partition. Subsequent audits found no problem.

  -Start Internet recovery, wipe the drive and do a clean install of Mountain Lion. Stuck on the Apple logo and the spinning wheel after restart. After that a hard reset, started cleanly in ML, obtained through the initial configuration and at the login screen, then no further.

  This happened first with a Samsung 850 EVO 500 G, who had worked with my old MBP (mid-2011 i5). After seeing several reports of Mac incompatibility with these drives, I got a Crucial 750 G and I'm having the same problems. None of this is happening with the mechanical transmission provided with the system. El Capitan, all updates and the firmware is up to date.

  Have you tried to start the MBP with the new SSD connected externally via USB.  If successful, the internal SATA cable is the main suspect and should be replaced.

  Ciao.

• display non-functional ati2dvag - Satellite 1900 driver

  Hello everyone: Please help me. When I try to use Windows Media Player, I have no functional error ati2dvag display driver. Everything is distorted and I need to reboot, but the problem persits trying to use WMP. I have a portable Satellite 1900, XP Home SP2 and the display driver's MOBILITY M6.

  Anyone, anyone who knows about which driver replaces MOBILITY M6? I want to be sure one to use. OR anyome knows how to solve my problem?

  Thank you very much!

  Hello

  Maybe the error due to the installed Windows XP with SP2?
  It will happen if you are using the operating system of the Toshiba recover CD?

  I put t know what graphics card you have, but try to use the drivers omega graphics.

• Creating multi-rendition (retina and non-retine) from a folio

  Hello

  We would like to create a folio of rendering multiple from a single set and retina-size of the source files. I saw cela in a few places, but am unsure of the workflow. Is anyone able to point to a guide to achieve this?

  Thanks in advance,

  
  Toby

  For best results, create PDF folio with a resolution of 1024 x 768 and it will work fine on the retina and retina no iPad.

• Bridge CC does not display previews for PSD, PDF, HAVE

  I'm unable to see previews of these bridge CC. It seems not be suspended or held in regeneration of previews, just don't show them. Double click opens the relevant program. With the help of Windows 7 Pro and the 64-bit version.

  Welcome to the forum,

  Not sure if this is the problem or if this can help, but you can try to purge the cache, etc...

  http://helpx.Adobe.com/bridge/using/Adobe-Bridge-workspace.html

  Restore preferences

  Many parameters of the program are stored in the Adobe Bridge preferences, including the display file, Adobe Photo Downloader, performance and file management options.

  Restoration of preferences returns settings to their default values and can often correct unusual behavior of the application.

  Press and hold down the CTRL (Windows) or Option (Mac OS) key to start Adobe Bridge button.

  In the reset settings dialog, select one or more of the following options:

  Reset preferences

  Preferences of returns to their default values. Labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.

  Purge the Cache of thumbnails together

  Purge the cache of thumbnails can help if Adobe Bridge does not correctly display the thumbnails. Adobe Bridge recreates the cache of thumbnails when it starts.

  Reset Standard workspaces

  Returns Adobe preset for default configurations of their factory, the workspaces.

  Click OK or Cancel to open Adobe Bridge without resetting preferences.

  If this does not help, try searching the forum bridge or asking it.

  http://forums.Adobe.com/community/bridge

• Live View PHP error: Live View cannot display non html files

  I use DW CS5.5 on Windows 7 64 bit.

  I get this error when I try to view any PHP file:

  Live View mode cannot view the non-html, pdf, doc or ppt files. As you can see, I try to view a php file.

  The second error in the list relates have troubled Donostiarra dynamically related files. "an unknown error has occurred."

  I can't find anything on the internet on this subject. Help, please.

  

  Here's an update:

  The problem was in the .htaccess file that I have uploaded to the server.

  I started above absolute zero. I have downloaded a new copy of Wordpress, supported my database online, active, work, reinstalled WAMP. Everything worked perfectly. Even got rid of the above errors that Dreamweaver gave me.

  When I placed the .htaccess file servers in the new copy of my local site folder, that's when things went haywire.

  Here is what says the .htaccess file:

  RewriteEngine on

  # Use unique default PHP5 php.ini

  AddHandler application/x-httpd-php5s .php

  # BEGIN WordPress

  RewriteEngine on

  RewriteBase /.

  RewriteRule ^ index\.php$-[L]

  RewriteCond %{REQUEST_FILENAME}! f

  RewriteCond %{REQUEST_FILENAME}! d

  RewriteRule. index.php [L]

  # END WordPress

  # BEGIN WordPress

  RewriteEngine on

  RewriteBase /.

  RewriteRule ^ index\.php$-[L]

  RewriteCond %{REQUEST_FILENAME}! f

  RewriteCond %{REQUEST_FILENAME}! d

  RewriteRule. index.php [L]

  # END WordPress

• ROLLUP and display Non-existing lines

  This query generates the results except that I wish I had a total average and overal final (excluding the GPA 'No'). Shown that XXX in the sample output. Is it possible in a single query, or do I need the Union for the summary?
  
  In addition, if possible, how can I write instructions so that the lines that doesn't exist may not be not can be displayed on the output? Example: he has no GPAs in the range of 0.1 to 0.9. My query results show not the first two rows, however, users would like to see these lines displayed regardless of the existence or not.
  

              
  GPARange            Count  Avg
                              
  0.1 - 0.6  (F )            0      0.00
  0.7 - 0.9  (D-)            0      0.00
  1.0 - 1.2  (D )            1      
  1.3 - 1.6  (D+)            1     
  1.7 - 1.9  (C-)            4      
  2.0 - 2.2  (C )           20    
  2.3 - 2.6  (C+)           81
  2.7 - 2.9  (B-)          189
  3.0 - 3.2  (B )          387
  3.3 - 3.6  (B+)          452
  3.7 - 4.9  (A )          316
  NO GPA                   271
  TOTAL                   XXXX    X.XX

  SELECT academic_period, 
         stu_population, 
         College,  
          CASE 
              WHEN ((MBA_GPA)) <= 0.6 then '0.1 - 0.6 (F )' 
              WHEN ((MBA_GPA)) <= 0.9 then '0.7 - 0.9 (D-)' 
              WHEN ((MBA_GPA)) <= 1.2 then '1.0 - 1.2 (D )'
              WHEN ((MBA_GPA)) <= 1.6 then '1.3 - 1.6 (D+)'
              WHEN ((MBA_GPA)) <= 1.9 then '1.7 - 1.9 (C-)'
              WHEN ((MBA_GPA)) <= 2.2 then '2.0 - 2.2 (C )'
              WHEN ((MBA_GPA)) <= 2.6 then '2.3 - 2.6 (C+)'
              WHEN ((MBA_GPA)) <= 2.9 then '2.7 - 2.9 (B-)'
              WHEN ((MBA_GPA)) <= 3.2 then '3.0 - 3.2 (B )'
              WHEN ((MBA_GPA)) <= 3.6 then '3.3 - 3.6 (B+)'
              WHEN ((MBA_GPA)) >  3.6 then '3.7 - 4.9 (A-)'
              WHEN ((MBA_GPA)) is null then 'No GPA' 
          ELSE
              'What Happened'
         END as GPARange,
         count(id), round(avg(mba_gpa),2) AVG_GPA
  FROM gpa_stat
  where stu_population='F'
  and academic_period ='200940'
  GROUP BY  stu_population,  
            academic_period,
          CASE 
              WHEN ((MBA_GPA)) <= 0.6 then '0.1 - 0.6 (F )' 
              WHEN ((MBA_GPA)) <= 0.9 then '0.7 - 0.9 (D-)' 
              WHEN ((MBA_GPA)) <= 1.2 then '1.0 - 1.2 (D )'
              WHEN ((MBA_GPA)) <= 1.6 then '1.3 - 1.6 (D+)'
              WHEN ((MBA_GPA)) <= 1.9 then '1.7 - 1.9 (C-)'
              WHEN ((MBA_GPA)) <= 2.2 then '2.0 - 2.2 (C )'
              WHEN ((MBA_GPA)) <= 2.6 then '2.3 - 2.6 (C+)'
              WHEN ((MBA_GPA)) <= 2.9 then '2.7 - 2.9 (B-)'
              WHEN ((MBA_GPA)) <= 3.2 then '3.0 - 3.2 (B )'
              WHEN ((MBA_GPA)) <= 3.6 then '3.3 - 3.6 (B+)'
              WHEN ((MBA_GPA)) >  3.6 then '3.7 - 4.9 (A-)'
              WHEN ((MBA_GPA)) is null then 'No GPA' 
          ELSE
              'What Happened'
         END,
            rollup(college)
  order by 1, 2, 3, 4;

  Hello

  user1069723 wrote:
  This query generates the results except that I wish I had a total average and overal final (excluding the GPA 'No'). Shown that XXX in the sample output. Is it possible in a single query, or do I need the Union for the summary?

  Yes, you can do it in a single query, using ROLLUP. You don't need a UNION.

  In addition, if possible, how can I write instructions so that the lines that doesn't exist may not be not can be displayed on the output? Example: he has no GPAs in the range of 0.1 to 0.9. My query results show not the first two rows, however, users would like to see these lines displayed regardless of the existence or not.

  That's exactly what outer joins: they display data in a table with data from a second table, if all relevant data are found. The data in the first table are displayed if there is a match. If there is no match, all the columns in the second table are set to NULL. If you want to treat NULL values as 0, use NVL, as I did when displayijng average, below.

  In this problem, which is of the first table, the table has one line per degree, which is displayed even if no line in the result set is in this range of grade?
  You should have such a table. The information on where the beaches begin and end, what letter grades are associated with each and so on, are given. Data belong to the tables, not hardcoded in queries. If next year, they decide to change where the limit between D + and C-falls, or to add a group A, an authorized user can make the change to a table. No matter how many queries use grade ranges, no programmer will need to change any question.
  Here's how you can create a table of this type:

  CREATE TABLE     GPA_Range
  AS
  SELECT  0.0 AS low_gpa, 0.7 AS high_gpa, '0.1 - 0.6 (F)'  AS display_txt, 'F'  AS letter_txt     FROM dual     UNION ALL
  SELECT  0.7 AS low_gpa, 1.0 AS high_gpa, '0.7 - 0.9 (D-)' AS display_txt, 'D-' AS letter_txt     FROM dual     UNION ALL
  SELECT  1.0 AS low_gpa, 1.3 AS high_gpa, '1.0 - 1.2 (D)'  AS display_txt, 'D'  AS letter_txt     FROM dual     UNION ALL
  SELECT  1.3 AS low_gpa, 1.7 AS high_gpa, '1.3 - 1.6 (D+)' AS display_txt, 'D+' AS letter_txt     FROM dual     UNION ALL
  SELECT  1.7 AS low_gpa, 2.0 AS high_gpa, '1.7 - 1.9 (C-)' AS display_txt, 'C-' AS letter_txt     FROM dual     UNION ALL
  SELECT  2.0 AS low_gpa, 2.3 AS high_gpa, '2.0 - 2.2 (C)'  AS display_txt, 'C'  AS letter_txt     FROM dual     UNION ALL
  SELECT  2.3 AS low_gpa, 2.7 AS high_gpa, '2.3 - 2.6 (C+)' AS display_txt, 'C+' AS letter_txt     FROM dual     UNION ALL
  SELECT  2.7 AS low_gpa, 3.0 AS high_gpa, '2.7 - 2.9 (B-)' AS display_txt, 'B-' AS letter_txt     FROM dual     UNION ALL
  SELECT  3.0 AS low_gpa, 3.3 AS high_gpa, '3.0 - 3.2 (B)'  AS display_txt, 'B'  AS letter_txt     FROM dual     UNION ALL
  SELECT  3.3 AS low_gpa, 3.7 AS high_gpa, '3.3 - 3.6 (B+)' AS display_txt, 'B+' AS letter_txt     FROM dual     UNION ALL
  SELECT  3.7 AS low_gpa, 999 AS high_gpa, '3.7 - 4.9 (A-)' AS display_txt, 'A-' AS letter_txt     FROM dual     UNION ALL
  SELECT  NULL,            NULL,             'No GPA',                         NULL             FROM dual;
  

  As always, the document everything, especially not intuitive or things potentially misleading:

  COMMENT ON COLUMN gpa_range.low_gpa IS 'Lowest numerical grade inside this range.';
  COMMENT ON COLUMN gpa_range.low_gpa IS 'Lowest numerical grade in THE NEXT range.  This value is OUTSIDE of the range';
  

  You may prefer to assign impossible low_gpa and values of high_gpa (as -2 and -1) to the line "No. GPA. It is completely arbitrary, time-consuming and potentially confusing, but he'd reach out more easily.

  If you cannot create such a table, you can use a subquery that is almost identical to the CREATE TABLE statement above in all the requests he needs.

  This is the main query to do what you asked:

  WITH      interesting_gpa_stat     AS
  (
       SELECT     college
       ,     mba_gpa
       FROM     gpa_stat
       WHERE     stu_population     = 'F'
       AND     academic_period     = '200940'
  )
  ,     all_colleges     AS
  (
       SELECT DISTINCT     college
       FROM             interesting_gpa_stat
  )
  SELECT        c.college
  ,        r.display_txt           AS gparange
  ,        COUNT (s.college)             AS count
  ,        NVL ( AVG (s.mba_gpa)
              , 0
              )               AS avg
  FROM                all_colleges          c
  CROSS JOIN        gpa_range          r
  LEFT OUTER JOIN        interesting_gpa_stat     s     ON (     c.college     =  s.college
                                              AND     r.low_gpa     <= s.mba_gpa
                                            AND     r.high_gpa     >  s.mba_gpa
                                         )
                                OR (     c.college     =  s.college
                                   AND     r.low_gpa     IS NULL
                                         AND     s.mba_gpa     IS NULL
                                         )
  GROUP BY  ROLLUP ( c.college
                    , r.display_txt
             )
  ORDER BY  c.college
  ,            r.display_txt
  

  Without the data from the sample and the results desired from these data, I had to make several assumptions.

  For example, I assumed you wanted to have several colleges in the same result. For each college, there will be a production line for all ranges of quality in the gpa_range table, regardless of whether if any matches are found in the gpa_stat table. It's okay if it is the only College if the result set.

  The query includes a total for each college and set a total for all the results.

  No filtering (e.g. stu_population = 'F') needs to be done in the subquery interesting_gpa_stat. You could get without the subquery, but filtering conditions that would be in the WHERE clause would have to be added to outer join conditions.

  NULL values are ignored in all global funcitons, so nothing special has to make the lines remain in the group "No GPA" to distort averages. The NVL function 0 presents itself as average when no grades were found in other lines always cause this average to apperar 0 in 'No GPA' lines, too. If you prefer NULL in this column, then place the NVL inside a CASE expression.

  Published by: Frank Kulash, 28 June 2009 05:03

• MacBook Pro 13 "(non-retine) is not responding"

  My MacBook Pro started to act weird last night after I tried to update my software on the App Store and applications. I can't even check to see what operating system I currently have, because my computer won't let me open anything. It has been quite slow in the past two months as interim, but Ive been working on it, unlike my current situation, where the Rainbow of spinning whee turns just minutes without doing anything.

  My cursor moves always and I did in fact just to empty my trash after waiting for it to click open after 5 minutes. Sometimes I can complete as actions of 3-4 until she begins to perform slowly again. But it took about half an hour to actually launch the finder after that I tried my fourth restart of the computer.

  Ive tried to use force quit option to close the apps does not, but it does not close them. It freezes just once again.

  is there anything I can try to solve this problem? Any suggestions are appreciated!

  If you are able to select the option to restart under the Apple menu. If can not do then press and hold the Power button until the computer turns off. Wait ten seconds or more, then try this:

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

• Is it possible to hide (display: none ;) a div when connected with liquid?)

  Example div:

  < div class = "alert-box success" > < a href = ' / users/account "> consider registering for a quick booking or log in here. < /a > < / div >

  Is it possible to provide a code example please?

  If you want something hidden because it is not required then proceed as follows:

  {% If this.globals.user.isLoggedIn-%}

  {%-%}

  {endif %}

  Looks like you can use for a connection. Here is an example:

  {% If this.globals.user.isLoggedIn-%}

  my account | logout

  {%-%}

  sign up | Open a session

  {endif %}

• Can I hide (display: none ;) web content app with liquid if no content was involved?)

  I can hide the "Details" link in this web app with liquid if no connection has been entered? < a href = "{link tag_page}" > here < /a > details - http://mdbrick.BusinessCatalyst.com/special-offers - If so someone could provide an example of code to do it please? See you soon

  Yes you can do it with the liquid. In the example, it depends on what means "detailed information" in your example below. You can get from size or make a {% if this! = "" %}}

    {module_webapps id="WebAppNameHere" filter="all" sortType="weightreverse" render="collection" collection="exampleList" template=""}
    {% for example in exampleList.items -%}
      {% assign hasReadMore = example.["Summary"] | size %}
      {% unless hasReadMore == 0 %}
        Read More
      {% endunless %}
    {% endfor -%}