Display order of Gallery

Similar Questions

• BlackBerry smartphones, how can I change display order of photos?

  Hello!

  I searched the forums, but I don't see this issue raised by anyone...

  I download pictures to my Storm 2 from my computer using the BB Device Manager.

  Is it possible to change the display order of photos once they are downloaded on my Storm 2?

  The order of display on the computer does not appear to match how they appear on the Storm 2 and actually, it seems to have much to do with the name of file, either.

  I would appreciate any idea that someone has!

  Thank you!

  Martin

  ALIAS: Snailman22030

  Open your icon media > press the Menu key > Options > photos sort by > choose your setting.

• Change display order with access to the laptop screen

  have a hp dv7 is about 4 years old, that the connected screen was broken, (always visible only small portion) and have changed somehow connected only on-screen display order.  have tried several options and tricks forums have suggested but not chance of recovering it for external display also. Is there a combination of key STROKE or another remady to correct this.  Was able to boot to desktop etc so do not think that his material proplem trying to restore or recovery to clean the accumulated junk thanks for any help

  Try to use the FN + F4 key combination to play with the external display.

• How can I change the display order of the masters in the Pages of the CC Panel 2015?

  How can I change the display order of the masters in the Pages of the CC Panel 2015?

  When you drag the master page icon upwards or downwards, look at the horizontal to appear, and then release.

• (Redirected) Dell XPS 15 4 k display order cancelled by Dell?

  On 4 February, I ordered a Dell XPS 15 with 4K display, their configuration more expensive and had a Feb. 25 date.

  Every day, I check my status of order, to see if there is no change. and last night when I did I noticed that my order has been cancelled.  I didn't cancel it, so this morning, after an hour and a half on the phone I know that Dell cancelled my order because of the incorrect system configuration.

  When the representative the customer Dell told me this, I told myself; Hmmm, maybe it's a blessing in disguise and I will get a faster processor, or better video card... while I stayed on hold when you rep the new correct configuration set up all kinds of visions of faster systems has crossed my mind...

  Then the rep comes back and lists the new configuration...  Dell XPS 15 basis, CPU Intel, 16 GB RAM, SSD 512 GB, etc etc...  I watch my old configuration and there is NO CHANGE!

  I asked the Rep, Wow; Wait a second, you listed the same configuration I initially ordered... what gives?  The answer that gave me is that the old configuration had different components... I asked who is different and we cannot give an answer.

  In addition, the new delivery date is March 10.

  Wait, I can go to Dell.com; and the same configuration is publicly available with a shipping date of March 4.  Why is mine is longer?

  Because I want to really this notebook, I advanced and accepted the new order.  I hope that it does not get cancelled just before 10 March too...

  I was a proud owner of Dell XPS M1710 and then a MacBook and an ASUS laptop; and now I decided to go back to Dell and this is the treatment I receive...  I hope that it goes better, not worse...

  Anyone else have this same problem?

  Better to post this thread in the Customer Care Forum here:

  http://en.community.Dell.com/support-forums/customercare/f/4674.aspx

  Bev.

• XML parser - display order

  Hello

  I have a program that does the following:

  1 contact the http server and executes a query on a mysql database.

  2 Php script generates an xml file

  3. XML file is downloaded on the BlackBerry.

  Steps one and two work perfectly well - no problem there.  When the XML is generated on the server, entries are sorted in ascending order according to the unique primary key assigned to each record (an integer).  I downloaded the XML file on the server and it has inspected and everything is in order.

  The problem is the following:

  When the XML file is downloaded on the BB and the contents of the XML file displayed on the BB, the information that is displayed is not in order according to the unique primary key assigned to each growing record.  Indeed, the information is displayed in what appears to be a way almost no organized.  (I say "almost no organized", as it doesn't seem to be a discernible patter, but I have not yet studied to confirm if this is indeed the case.)

  The XML parser works like this:

  1. downloaded XML file

  2. the information is extracted from the file by using a loop.

  3. in the course of each loop cycle, a channel is created and this string is then inserted in an EditField.

  4. a new EditField is instantiated for each record.

  I don't know if I am missing something on the side of analysis of XML.  Any ideas?  All the world was faced with a similar problem?

  One of my friends from specialist tech understood the problem.

  I wrongly assumed that a mySQL query has been resolved.  I'll have to add a suffix "El TRI" to my query mySQL in my PHP script.

  Problem solved.

• Display order of records

  Oracle version: 11g

  Question: Is it possible to recover an SP results in the same order in which a particular argument is passed?

  Here's how I call the SP:

  EXEC USP_XXXX('51,49,50',:RES)

  Expected result is:

  51

  49

  50

  The result that is displayed:

  51

  50

  49

  Please note that I did not use the ORDER BY clause in MS.

  Kindly let me know, in the case of more information, if necessary.

  Thank you

  Vinodh

  
  

  Like this?

  SQL > create or replace procedure get_emp_in_order
  () 2
  3 p_empno_list in varchar2
  4, p_output on sys_refcursor
  5)
  6 as
  7. start
  8. open p_output
  9 for
  10. Select e.empno
  11, e.ename
  e emp 12
  Join the 13)
  14 select level NWR
  15, to_number (trim (regexp_substr (p_empno_list, "[^,] +', 1, level"))) empno
  16 double
  17 connect
  18 by level<= length(p_empno_list)="" -="" length(replace(p_empno_list,="" ','))="" +="">
  (19) e1
  20 on e.empno = e1.empno
  21 order
  22 by NWR;
  23 end;
  24.

  Created procedure.

  SQL > exec get_emp_in_order ('7521,7876,7782,7369',: rc)

  PL/SQL procedure successfully completed.

  SQL > print rc

  EMPNO, ENAME
  ---------- ------
  7521 WARD
  7876 ADAMS
  7782 CLARK
  7369 SMITH

  SQL >

  But pass the list of values as the chain is never a good idea.

• The colours become Blotchy and have an unpleasant orange cast after record in Photoshop and display in the Gallery pictures Windows or online

  Hello world!
  So I'm having another problem with my color settings when recording of my image. I don't think it's to do with the color settings profile because I had a problem with those from before, but my settings seem to all be OK and that they should be, but who knows. Basically, once I've saved my image in photoshop and then open it to view the windows photo gallery or download online and view it. shades seem very fuzzy and unpleasant. The image seems to be developing a more contrasted casting yellow orange, colors appear more smooth and natural as they did in photoshop. It must be something to do with how I save the image but I can't seem to understand where I have gone wrong
  Here's a before and after picture of comparison; The left image is the appearance of the image in photoshop and how I would like it to appear when I save it. The left image is the appearance of the image once it has been saved in photoshop then opened in the Gallery of photos or downloaded Facebook for example windows. As you can see, the colors are not as smooth as the picture on the left and he seems to have a warm cast contrasted on it that I don't like at all. Maybe I'll be picky, but if anyone has any suggestions on what I am doing wrong, I would appreciate your comments!

  Thank you!

  There will always be a difference between complete with color management software and software without color management. The first is right; the latter is false.

  Most of the major Adobe applications are color management. So is the Windows Photo Viewer. All color management applications should always display the same - if this isn't something wrong (usually with the monitor profile). These applications need it, it's a profile type conversion from the document profile for the monitor profile. The result of this conversion is going on the screen. This conversion is performed on the fly, which is updated constantly, while you work.

  It follows that the accuracy of the display depends on the accuracy of your monitor profile. Best profiles will always be with a stallion.

  Without color management applications are not all that. They just send the numbers in the original directly to the monitor.

  You are talking about what happens "when you save the file. Nothing happens when you save. What happens, is that you use different applications to display the file. That is the difference.

• Display order

  The following code places a button on the stage, then place a sprite on top of the entire scene to intercept a mouse click. The problem is that I can not click on the button because it's icing by the sprite.

  How can I make the clickable button?

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML " "layout = "absolute" xmlns:ns1 ="*" applicationComplete = "init ()" >
  < mx:Script >
  <! [CDATA]
  import flash.display.Sprite;
  Import mx.controls.Image;
  private var mouseUpPosition:Number
  private var mouseDownPosition:Number
  private function init (): void {}
  var square: Sprite = new Sprite();
  Square.Alpha = 0
  square.graphics.beginFill (0xFF0000);
  square.graphics.drawRect (0,0,100,100);
  square.graphics.endFill ();
  square.addEventListener (MouseEvent.MOUSE_DOWN, reportMouseDown);
  square.addEventListener (MouseEvent.MOUSE_UP, reportMouseUp);
  Square.Width = stage.stageWidth
  Square.Height = stage.stageHeight
  display.addChild (square);
  }
  private void reportMouseDown(event:MouseEvent):void {}
  mouseDownPosition = event.stageX
  trace ("Low Position =" + mouseDownPosition)
  }
  private void reportMouseUp(event:MouseEvent):void {}
  mouseUpPosition = event.stageX
  trace ("Position =" + mouseUpPosition)
  }
  
  private function buttonClick (): void {}
  trace ("XPos =")
  }
  
  []] >
  < / mx:Script >

  < mx:Button id = "button" label = "click on" click = "buttonClick ()" / > "
  < mx:UIComponent id = "Display" / >
  < / mx:Application >

  SiHoop,

  In mxml, components are added in the order they are listed, which means that the display list is in front of the order you listed. The first point is on the bottom, the other is added above him, the next added above it, etc. Try changing

    
  

  TO

  Thank you

  Philippe

• Cisco ACS 4.2 providing display orders only

  I am trying to create a user so that I can give him only to run see command nothing else.

  (1) created a user in ACS

  (2) create Shell permission Set - ReadOnly command

  Unmatched orders - deny

  Commands added

  Show

  output

  3) established a group - support with the following parameters of GANYMEDE.

  Shell (exec) is checked

  Privilege level is check with 15 as the assigned level

  Assign permission to command Shell Set for any network - selected device

  ReadOnly - set current shell command authorization

  I set up on my router

  AAA authorization config-commands

  AAA authorization commands 0 default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + local

  AAA authorization commands 15 default group Ganymede + local

  But still the user can run config t and other commands. Someone help me how to solve this problem

  Hello

  I'm trying to figure out what might be the case. That's why ask you the question.

  Which option is checked the

  Configuration of a Shell command authorization set for a user

  is this Group?

  Configuration seems fine for me. Just for a configuration can more you please check whether the configuration is based on the link:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• What happens if I don't want the photos to be displayed in the Gallery?

  I have some pictures on my phone that I'd rather not appear in the gallery. Short to download a separate application, is there a way to see them now? I don't need to lock away from the prying eyes of enemy agents or a jealous spouse, do not want to appear on a modern inspection of the phone. If the only way is an application, any recommendations?

  I read in another thread on hidden files. I think it was in one of the threads MP3 or ringtone. Something to put a period before the file name.

  It's a duty to keep certain records to private companies. I remember now. You might be able to find it by searching. It took Manager Astro of files.

• Display order of directory company name

  Hello

  I installed CUCM 9.1. In an IP business directory phone when the user is out out research shows ' last name'.»»

  Can we change it to 'name'?

  Concerning

  Andy

  No, the XML directory pages are not editable on CUCM based device.  It was possible at the time of Windows, but not more.

  HTH,

  Chris

• How to change the display order of the smartshapes

  I am very new to Captivate and I was wondering if anyone would be able to tell me how to do a smartshape "front". It is hidden behind a video that I inserted into a slide and I want it to appear on top of the video.

  Thank you very much in advance for any help!

  Hello

  Is this a Video object on your slide? Is your Smartshape above the video in your editing Timeline area?

  Can you post a screenshot of your slide when the Timeline is open?

  Also mention your version number of Captivate.

  Thank you

  MohanA

• Picture is not displayed in the photo gallery

  Dear friend,

  Apex worm 4.2.6

  I want to create a photo gallery in my application so

  I create a page and try a code to view images in the Gallery, but Image is not displayed in my Gallery.

  I have tried to create the gallery as below link Photo Gallery

  http://www.jssor.com/demos/image-gallery.html

  Please, help us create like this gallery.

  I create the sample page in my workspace. Please follow below reference identifiers

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  
  

  
  

  Application 92353 - Gallery

  Page n - 2

  
  

  Please help us.

  
  

  Thank you
  

  Hi Maxence,

  Created sample in your Application of 92353-> Page 7 - dynamic photo gallery (as mentioned in approach).

  Does the following on page 7:

  • Article "HTML Header" of the deleted page the JS code and moved the folder references to the 'file URL' and moved the JavaScript about cursor to 'Function and Variable global statement' in Page attributes-> JavaScript section.
  • Removed the CSS code in "Source of the region" and moved to the Page attributes-> CSS-> section Inline.
  • ODP created to download the images as mentioned in the blog post from Joel mentioned above:

  begin
      for c1 in (select *
                   from gallery_image_dtl
                  where id = :FILE_ID) loop
          sys.htp.init;
          sys.owa_util.mime_header( c1.mimetype, FALSE );
          sys.htp.p('Content-length: ' || sys.dbms_lob.getlength( c1.service_image));
          sys.htp.p('Content-Disposition: inline; filename="' || c1.file_name || '"' );
          sys.htp.p('Cache-Control: max-age=3600');  -- tell the browser to cache for one hour, adjust as necessary
          sys.owa_util.http_header_close;
          sys.wpg_docload.download_file( c1.service_image );
          apex_application.stop_apex_engine;
      end loop;
  end;
  

  • Changed the type of area ' PL/SQL (anonymous block' and 'Source of the region:

  declare
  
    cursor c_gallery_img is
      select id
      from   gallery_image_dtl;
  
    l_buffer varchar2(30000);
    l_link varchar2(512) := 'f?p='||:APP_ID||':0:'||:APP_SESSION||':APPLICATION_PROCESS=GETIMAGE:::FILE_ID:';
  
  begin
  
    l_buffer := '
      
      
  
  
          
          
  
              
  
              
              
  
              
          
  
          
          
  ';
  
    sys.htp.p(l_buffer);
  
    for r_gallery_img in c_gallery_img
    loop
  
      sys.htp.p('
  ');
      sys.htp.p('');
      sys.htp.p('');
      sys.htp.p('
  ');
  
    end loop;
  
    sys.htp.p('
  ');
  
    l_buffer := '[an error occurred while processing the directive]
          
          
          
          
          
          
          [an error occurred while processing the directive]
          [an error occurred while processing the directive]
          
          
          
  
              
              
  
                  
  
                      
  
                      
  
                  
              
              
          
          [an error occurred while processing the directive]
          Image Slider
      
      ';
  
    sys.htp.p(l_buffer);
  
  end;
  

  I hope this helps!

  Kind regards

  Kiran

• The order/agreement be attributed during the animation

  I mean, that is, if an object is in the rear when I mouse over it, it's the front, and then when I mouse out it goes back to the rear? I'm trying to do something like this http://codecanyon.net/item/dynamic-accordion-banner-rotator/full_screen_preview/628296

  or somethng like this http://codecanyon.net/item/fancyfolio-jquery-portfolio-gallery/full_screen_preview/1595481

  Hey Jason, you can set the z-index of an object on board, to change the display order.

  In the example below, "your_object_name" is the purpose of down that you want to move forward/backward. Start with the object 'your_object_name' below the other object.

  In the event of "mouseover" of your object, add the following:

  SYM. $("your_object_name") .css ("z-index", "100");

  In the event "mouseout/mouseouthandler()" of your object, add the following:

  SYM. $("your_object_name") .css ("z-index", "0");