Display problems - serious. Just a bit of text on one side.

Similar Questions

• TEXT DISPLAY PROBLEM IN CAMERA RAW

  Hello

  I have a text display problem in Camera Raw. Where there are labels of boxes that need to be checked, for example in the preferences or settings to be pasted to another file, the text is unreadable print. What happens is that he takes to the bottom of half of the top line and half top of the bottom line, rather than by extending the line if the text is only on a single line. It is a problem for me to see all the options. It's the same on all the text of the label within the program.
  
  I have attached a few screenshots to illustrate the problem.

  Any ideas would be greatly appreciated.

  Thank you very much
  
  Carl

  The problem is not with the size of the screen, but with the "pixel density" (never forget, that the density of physical pixels of the monitor is indicated). Right-click on the desktop and select Properties (or go to control panel and select display). On the Control Panel, select Advanced; the general Panel contains the DPI setting. I guess that the parameter is now greater than 96 dpi.

  I created a thread on this problem, which must have been at least two years ago. The answer was, as 1. Adobe will solve the problem, 2. It is a problem only with the classic Windows style (under the appearance tab). I have not tested with the XP style, because I prefer the classic style; I'm cursed and live with this shit (my setting is 120dpi).

  BTW, this may be much worse than half-readable labels: buttons, fields, text can disappear completely (you may even not notice, that there should be other buttons and the Panel options)...

  Gabor

• Problem adding images to the html text area.

  This, like a flying Executive pants down, is driving me crazy...
  
  Source can be downloaded where says "herehere" below (not used on this forum, seems a bit odd.)
  
  I have 2 text boxes on the stage, both are the "multiline" value and configured to return 'html '.
  they can also be programmed to display the contents of variables html1 and html2 respectively
  Thanks to the field "Var" in the Properties window. (if it's one thing to Actionscript 2).
  
  the html code that I use is a very basic < img src / > tag.
  You can use any small image file that you want to try, just change the two names of source files.
  (mine happened to be called bonkers.jpg, but gif and png seems to be the same).
  
  When I define "html1" directly, it works very well.
  If I set "html2" directly it works fine,
  However if I set html2 via a table, although the contents of the html1 both two html2 looks the same.
  (and all tracing code following checks it) the second html box does not work.
  
  It took me the better part of a day to understand that it was the process of transfer of an array
  that was the origin of the problem, but why? What does an array into a string that allows you to stop working in html?
  
  Any help would be appreciated.
  Thank you
  Gas
  
  
  
  here here

  Thanks, that certainly seems to overcome the problem. I was beginning to think it was me :), but obviously display of the variables in a html text box can be a little bug in flash.

  I called box1 and box2 and box1.htmlText =... to change the values, it now works fine.

  Thanks a lot for this.

• Display problem on my A60 Pro Sat

  The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

  Hello, Robert

  Have you changed anything on your device or this occurs suddenly display problem?

  I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

  If there is some serious hardware issue please let us know.

  Good bye

• Tecra S1 display problem

  Unfortnately my tecra s1 hit the table of coffee on the ground, the screen immediately turned white. When I rebooted there was no display at all (black only)
  The computer works as I plugged on a screen external and that was very good. I tried to follow various troubleshooting guides online showing how to disassemble the laptop and reinstall the connector of the display on the motherboard, but this did not remedy the problem.

  I noticed coming from the display was a big bunch of wires going into a connector that I reinstalled, on the right hand side of the screen is a white and black wire to a connector and a pink wire that seemed to just float, I couldn't not whence he came. Does anyone have ideas on the subject of this thread or other tips that can help me.

  Thanks in advance

  Hello

  Unfortunately, mate, you won't find any manual disassembly here on the pages of Toshiba. These manuals are not for use public and designed only for the FSA.
  But I think you could google a bit and you should find a few details.

  I think that it is a display problem that I doubt that some loose cables could cause this problem
  In my view, the screen is broken and needs to be replaced
  To do this, you should get in touch with your technician ASP.

  Good luck

• When you use the metro apps the computer displays a black background instead of a text being illegible white

  When you use the metro apps the computer displays a black background instead of a text being illegible white

  So basically I can't use the metro beyond the home screen interface
  Know of a solution:
  Using
  i7 processor
  640 m GPU NVIDIA
  6 GB memory
  It could be a driver problem or there at - it an option to change

  You have FXAA enabled in the NVidia Control Panel? That was the problem for me.
  Otherwise, just click on restore in Control Panel and it should fix the problem.

• Network configuration of Roaming Wifi problem I just bought an Airport Extreme and I intend to use it as my router

  I just bought a refurbished Airport Extreme and I intend to use it as my router & combine with our old time Capsule of existing one to create a roaming Wifi network.

  The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)

  Our small ethernet is connected to my iMac [mid 2010 running OSX 10.11.5] & a PC and extends up to 2 other domains through an ethernet switch.

  This configuration works very well, our internet speed has improved slightly - better than our old T-Link router bit.  WiFi available throughout the House - better on one side.

  Time Capsule (2 TB) is connected by ethernet on the far side of the House, offer backup Time Machine and strong Wifi to this area.

  This time Capsule was an existing installation that went perfectly with the T-Link before I bought the Airport Extreme.

  I used the Airport utility to set everything up and it seems to work.

  The problem is:

  Combines the Capsule and extreme connected & active, the Internet gradually slows down and grinds to stop. -Wifi seems to follow suit, but is much more gradual.

  If I disable the Time Capsule, the internet connection is back to normal, Airport Extreme Wifi signal is strong and extends to almost all areas.

  I got to the departure of the two units configuration problems, so I reset both factory default and from that moment managed to do all this work - with the exception that the internet connection slows down.  Whenever I visit a different web site, it takes more time to load/link upward.

  I spoke with our ISP, the link to our tower is solid. The technology suggested that I put Wifi on each unit to use a different channel (2 frequencies & several channels each available).

  So far, this has not resolved the problem, I will continue to make adjustments.

  I googled this - most of the answers are not to date - usually 2012, 13, 14. and not directly related to my situation.  But I will continue my search.

  I'd appreciate if anyone here has any suggestions

  The new Airport Extreme (renovated) is in my studio/Office - directly connected to our internet broadband wireless (WAN port)

  What is the number and the model of the modem or modem/router that your ISP has provided you?

  Should we assume that you use a Mac with the help of a current or recent operating system?

  If you get out of the Capsule of time and leaves disabled for now, the network AirPort Extreme continue to run at full speed for a few hours and not slow down?

  We ask these questions because we must first confirm that the AirPort Extreme works properly until we can begin to troubleshoot the connection to Time Capsule.

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Display problems with the Portege R600 and Win 7

  I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

  I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

  It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

  A refresh solves it.

  Anyone have any ideas?

  > I have an external monitor attached and get the same problem with or without him.
  Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
  It would be the worst case, because that would mean that the motherboard needs to be replaced

  But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

• Display/save image in 8-bit grayscale

  I have a VI that captures an image in grayscale 8 bits (table 1 d of 1500 pixels). It has a 10-byte header that I remove and try to view it.  The problem is that the image is considered to be a RGB.  In addition, the saved image can be opened with an image viewer but is not correct.  The pixel data is missing. How do I get this to display an image in 8-bit grayscale.  I would also like to duplicate the 1 line of the image to about 50 lines data to make it easier to observe.  using a loop and indexing the line only leaves the empty pxmao.

  

  Bjoles,

  You are missing a color table entry to your flatten pixmap block. See extract vi I have attached. Also, I found that building the tables of a loop is a quick way to do it, Labview seems to pre-allocate memory correctly.

• Display problems with all types of terrain and graphic

  Hello

  I have display problems general with all types of chart, graph or plot that I try to use, on two different machines, both with NVIDIA graphics cards.  A machine is a MacBook under XP SP2 in bootcamp and the other a Dell T3400 workstation (or something similar) under XP SP3.

  I posted this thread earlier which Ben replies to the weird graphic behavior.  Ben suggested that I try to simplify my code as much as possible while keeping the bad behavior and by submitting to the NC and the forum, because it is others have had problems of graph.  I tried, but in vain.  Display problem continues and continues and continues and then they just go and I can't get back by unscrewing the last stage of reduction or simplification of code.  But at some point during the reconstruction of the code, which I cannot determine, returns the bad behavior.

  So, I was set up with graphics looking for shit, until recently, when I thought I'd try some suggestions of other messages to a XY-plot function as a graph by creating a buffer and using nodes of ownership of land for the range control.  Things seemed promising, until my "XY table" started getting shit, too.  This time, the issue was with the grid lines becomes all chopped, attached images.

  I am out of resources here.  I think I'm running out of options to display graphic data in an acceptable manner.  Do I have to display data by using an Excel chart in an ActiveX container in Labview?  I'm not skilled enough to do it again.  I like Labview, it is the only programming language that I am competent even remotely help, but it's just inferiorating.

  Any suggestions would be much appreciated.  Thanks for reading.

  -Greg

  Greg,

  is there a particular reason why you use the bar plots - view superior graphic style? Try activating the legend of the plot, go to the bar plots and select the first track of the Bar Style. Your chart is displayed very well after that.

  See you soon,.

  Cerati

• HP Pavilion TouchSmart 23-f280: No. Intermittent display problem

  Hi guys,.

  Need your help with this new pc HP Pavilion TouchSmart 23-f280d all-in-one desktop PC.

  all newly purchased this product and had no problem to display but not to start the computer. It will happen only once I used as watch videos or whatever it is around 10 minutes to 20 minutes and the display will be switched off the sound always playing in the background. Later I just be like around a few minutes, then it will be back to normal. but sometimes, when this problem occurs, I tried to leave about an hour but goes blank display.

  Please help me to get the solution on this issue.

  Hello @ali_je24,

  I understand that you have a display problem intermittent with your new HP Pavilion TouchSmart 23-f280d all-in-one desktop PC. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As with any new unit you want to ensure that all issues are dealt with properly and that they are properly documented.

  I want to thank you for display on the HP Forums. Have a great day!

• Display settings stuck on 4 bit to an absolute minimum resolution

  Hello, I have an old Packard Bell iMedia PC running Windows XP Media Center edition. About a year ago I started having display problems, the monitor would go black all of a sudden and then turn it on again. This started happening more frequently until I was forced to connect in safe mode, recover all my vital files, and then reinstall windows. This did not help. After reinstalling the computer developed a new problem, he wouldn't be able to start with the display to 4 bits at a resolution of 640 and nothing I could do would change. At this stage one kindly gave me his old copy of WIndows XP Professional SP3 as there has been migration to Windows 7 and I used that to repartition my hard drive and reinstall windows. After installation, I found my computer worked perfectly once again, until I restarted - it got stuck at absolute minimum resolution again.

  Since I replaced the hard drive with a Seagate 500 GB, once more it worked perfectly until I restarted where it got stuck at least once. I went into the settings menu to display and use the Troubleshoot utility, he told me to open the Advanced menu and click the monitor tab, but I could not assess the preferences.
  Can anyone help? My computer looks like, it is blocked in safe mode, even if it's not!

  Thank you for your response.

  I don't know that 'basevideo"checkbox is not checked.

  And I found that there is 3 GB.
  I have test without / 3 GB, it's OK now.

  Solved.

  My display driver is:
  http://downloadmirror.Intel.com/18774/A08/winxp_14374.exe

  Thanks again.

  Ken

• HP 15 r250tu: Hp 15r250tu display problems

  Hello

  Recently, I bought Hp15 r250tu and since I used it, I was faced with display problems (screen flickers and shows a lot of big white pixels flickering on the screen).

  However, I have been facing this problem for browsing the web and did not face problems when using my laptop to watch full HD videos or play casual games.

  I also downloaded the Intel HD from the Hp website drivers and the problem is still not resolved.

  Please, help me to solve this problem.

  Hi @tushar_soni ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop HP 15-r250tu and get an error on some Web pages or glitter. Remove temp files don't help with sites or problems with the browser.

  Cookies are small text files that Web sites put on your computer to store information about you and your preferences. You can remove these preferences by following this Microsoft document Remove and manage cookies.

  Have you tried another browser?

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may require the update which could cause flickering.

  I would like to know how this happens.

  Thank you.