Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?

Similar Questions

• Satellite P750-13N - problem switching between nVidia and Intel GPU

  Hello

  I used my laptop Satellite P750 on its default settings because I brought and until now that has been very well.

  I use it mainly for games and now some of the more recent games have a hard run Shading.
  I used * www.systemrequirementslab.com/cyri * and he told me that I should be able to run most of these games without any problem.

  I checked my specs in dxdiag and noticed that it seems to be using the integrated graphics card Intel rather than the Nvidia Geforce GT540M map. I tried which helps the card in the Device Manager and disable the Intel graphics card, but the resolution has dropped drastically and dxdiag says there is now no graphics support found.

  I did something wrong or do you think that there is a problem with the laptop?
  Any help would be most welcome.

  Thank you

  This can be done in the nvidia Control Panel.

  + 1. Click Start, then Control Panel. Select Classic view in the left side of the window. +

  + 2. Double-click NVIDIA Control Panel. +

  + 3. Click view, and then add the "Run with graphic processor" Option to the context Menu. Close the NVIDIA Control Panel. +

  + 4. Right click on the title of the application and select run with GPU. Then, click processor high-performance NVIDIA. +

  Found this in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67755

• How to switch between levels and curves

  I'm going through a whole bunch of old photos of black and white box-Brownie and change most of the corrections that I made with levels of curves. I want to be able to switch between the applied image with levels and curves applied to observe the difference. Is it possible to do it with a key? If so, how?

  Maybe you should look into layers.

• Toshiba L 39, 4333 - how to switch between ATV and DTV channels

  I really don't understand.

  During a search of channel, I chose to find DTV and ATV, and he finds DTV 13 and 42 channels ATV,
  I can see the two in a list of channels while I'm still inside the channel search menu.

  But when I press the OK button (to exit the channel search menu) I have only channels DTV or ATV, function I watch last before pressing OK button.

  Have you ever read the manual Toshiba s L 39, 4333?
  Here the manual in case you want to check: [Manual user s Toshiba L 39, 4333 | http://www.toshiba-om.net/LCD/PDF/English/L4333-323950-English.pdf]

  You can watch analog (ATV) or digital (DTV) antenna channels
  You can sort the channels for ATV or DTV, but as much as I know you cannot mix ATV and DTV
  So for both you will have separate channels lists

• How to switch between 32 and 64-bit to run dBASE IV?

  I try to run dBASE IV backpack but it tells me that I can't run ms - dos mode 64

  You can not. Try dosbox http://www.dosbox.com/download.php?main=1

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to switch between two keyboards (Japanese keyboards have the double function of "direct entry"

  I have a laptop with keys 'English' and 'Japanese' on the same key board.  For example "A" key is also 'CHI' in Japanese, 'B' is also "KO" in Japanese.  How to switch between the two.  It changes itself.  This seems to happen after the mail in Hotmail changed in Outlook.

  Thank you

  Tomoko

  Hello

  Please go to the Microsoft Community Forums.

  From the description of the question, we understand that you want to switch between two keyboards entries.

  Let me go ahead and help you with the issue.

  Here are some steps you can follow to resolve the problem:

  Step 1:

  To change the default language, follow these steps:

  a. Click Start and then click Control Panel.
  b. double-click regional and Language Options.
  c. click on the languages tab, click details and then click Add.
  d. under input language, add the language that you want to use.
  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.
  Note: Only users who have permissions on the local computer can configure the following options on the languages tab in the regional and Language Options.

  Step 2:

  To resolve this problem, change the hot key settings in your computer system. To do this, follow these steps:

  a. right click on the language bar and then click settings.
  b. in the Text Services and input languages window, click the Advanced Settings button select an action and then click Change Key Sequence.
  c. set keys and then save the settings.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• How to switch web browser and which one should I use

  How to switch web browser and which one should I use thanks

  FireFox.
  http://www.Mozilla.org/en-us/Firefox/new/

• How to switch between sites?

  How to switch between my various sites?

  Hi Mike,.

  The only way to access your site different is by going to the admin of your connection and main partner site.  You should be presented a drop-down list of your different sites to choose from.  If this is of course what your partner site is provide no matter what the url of the site that you are working with and I'll help you check.

  Another option is to access your partner portal and from here, you can go to the "clients" tab and select no matter what site you need access. - https://securesyd.worldsecuresystems.com/PartnerPortal/Index.aspx

  Kind regards

  -Sidney

• How to switch between 0 v and 5 v using the FTDI USB-to-TTL converter?

  I have one of these (TTL-232R-5V-WE) FTDI (http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm) and it came with a few screws to control the USB converter.

  However, I do not know how to exit (between Vcc and Gnd) 5V to 0V.

  Basically, what I need is alternation since the converter FTDI TTL signal output.

  Any help please? Thank you in advance.

  Hi sclow,

  the link provided, you will find data sheets with all the necessary information. This device implements a COM port that is usual with just TTL level signals. The SCR will always provide + 5V with no opption put. But we can use the CTS/RTS signals! Just look at the description of the node property VISA-> settings-> modem line parameters series...

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

• Switch between files and change the window using f8 - Dreamweaver CS 6

  In Dreamweaver CS 2, I could switch between files and windows edition with the f8 key. Dreamweaver CS 6, this doesn't seem to work. Is there a way I can put it so that I can switch between the 2 windows with a keyboard shortcut?

  Hello stilley,.

  I'm now working with DW CC, so I can only show you how to work with it, but I'm sure it's the same way:

  In my German DW:

  Bearbeiten > Tastaturbefehle > screenshot > files > Kurzbefehle +-taste press > change > Ok.

  Translated something like:

  Edition > keyboard shortcuts > screenshot

  

  > Files > shortcuts + - press > edit > Ok.

  Good luck!

  Hans-Günter

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• (Vista) Is there a PRACTICE way to switch between speakers and analog headset?

  (Vista) Is there a PRACTICE way to switch between speakers and analog headset? Must I ALWAYS return the default setting, depending on which audio output device I want to use?

  We have recently installed Music Maker 16.  Before that, we never had a need for headphones and a microphone.  Now, in trying to use the headphone and microphone - and THEN switch back to speakers - we discover a problem.  Apparently, the only way to do it is to change the audio output device by default EVERY time.

  The dispute with this cannot be more of this.  My son records a beat and singing (with headphone and microphone), and then, play through speakers (so we can all hear), we need to change the default settings.  And back...  There must be a better way!

  Any help would be greatly appreciated.  Please talk layman jargon; I'm not a COMPUTER guru.  Thank you!!!

  Hi AnnieElle,

  You will need to switch between the speakers and the analog device and special value to use as the default device. There is no way to set the device to be used at the same time. You can follow the steps below to switch between the speaker and analog device.

  1. right click on the speaker icon in the taskbar.

  2. click on the playback device.

  3. Select speakers or analog device.

  4. right-click on it and click on set as default device.

  Hope the above information helps.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.