Display several values on the front using the table
For example, if I enter "10" for number of datapoints, I want to see 10 hexadecimal and binary all values in a column. At present, only 1 value appears and erasing all of the previous values
Thank you!
You do not use a shift register to store the values in the table between the fo the loop iterations For.
It is a fundamental concept of LabVIEW.
I recommend you watch the LabVIEW tutorials online
LabVIEW Introduction course - 3 hours
LabVIEW Introduction course - 6 hours
Tags: NI Software
Similar Questions
-
to display several values in the column as a simple comma separated
Hello..
My the source table structure is as
test_123
person_id varchar2,
phone_no varchar2
A unique person_id can have several phone_nos
as
person_id phone_no
123 1245
123 1246
123 1247
12460 124
124 12461
Now I want the output voltage
person_id phone_no
123 1245,1246,1247
124 12460,12461
How d she?
I want it in a single query?Many many many examples here.
http://www.Oracle-base.com/articles/Misc/StringAggregationTechniques.php
-
How to display Quick values in the story
With the help of 11.1.1.6.2
In a dashboard page, I have a table with a hierarchy of dimension for the organization. If you click on a division he runs a link action to call a script in the browser (javascript in a text on the dashboard section) from the division. If you expand the section, and then click on a market, it calls the function javascript even.
Then, the Javascript function uses path go to update an analysis in an iFrame on the dashboard page and passes the value of the Division or the market value.
The analysis of the target has two filters: Division is invited and the market is invited.
So, after all, my question is how could display two values from the call of the road go into a narrative on the analysis of the target? Or I guess the other question is how to view the filter on the narrative values.
Sorry for the long explanation, but I hope it makes sense.
Thanks for any help or suggestion.
BradTry something using the Div tag
for ex:
< div id = filterValues > @{WeekBetween} {Default Value} < / div >
< script >
var i = document.getElementById('filterValues').innerHTML;
document.getElementById('filterValues').innerHTML = aParams ["varDivision"];
< /script >If brand pls help
-
Dashboard invites using values of the table no
Hello
I have a requirement of the customer to design a report to dashboard as follows.
Guest of dashboard will have 4 filters, three filters comes from the table, but the fourth filter has 3 values of the table no. The fourth filter will have values like 'Report with Sales Amount', 'Report with the purchase amount', 'report with purchases and sales '. I have three different reports of Table designed for each of the fourth filter choices. But how I apply, also in line of dashboard and navigate through the rite based on the selection report.
My approach is correct.
Thanks for your time and your help.The fourth guest where you 'Report with Sales Amount', 'Report with the purchase amount', 'Report with both purchase and sales' you shoot a dummy column in the command prompt and write a sql in show.
would be something like
SELECT Case when 1 = 0 then the 'Customer Dimension. " "" Cust name ' another 'report with Sales Amount' the end OF sales UNION SELECT Case when 1 = 0 then 'Customer Dimension. " "" Cust name ' another 'report with the amount of the purchase' end OF sale
and in the quick game, a variable presentation tell var_criteria
Now create report2 for a certain randomn column with another column has the values you want to display for example 'in relation to the amount of sales.
Create a filter on the 2nd column and reference the variable var_criteria of presentation and it by default "in relation to the amount of sales.On the dashboard in the section page put the report and select navigatoin guided by selecting report 2.
Please let me know if you have any questions.
Thank you
deep -
Problem in the display of the values in the table
Hi all
I have data stored in the database in the form of comma and I want tot display these data in the table to the OFA.
Help, please. There is little urgency.
Best regards and thank youHello
To display values, you need create a transitional point of view and then create attributes according to your need,
In one of my projects, I did the same thing when I was storage sort order in a line while the OPS, I need to display it in the rows in the canton:
Pseudo code should look like this:
Public Sub getSortOrder()
{
OAViewObject VO = getSortOrdrerVO1();
Line line;
String s1 = "";
String s2 = "";
String s3 = "";
String s4 = "";
If (VO! = null)
{
line = VO.first ();
If (Row.GetAttribute ("SortOrder")! = null)
S1 = row.getAttribute("SortOrder").toString ();
If (Row.GetAttribute ("ColumnName")! = null)
S2 = row.getAttribute("ColumnName").toString ();
line = VO.next ();
If (Row.GetAttribute ("SortOrder")! = null)
S3 = row.getAttribute("SortOrder").toString ();
If (Row.GetAttribute ("ColumnName")! = null)
S4 = row.getAttribute("ColumnName").toString ();
System.out.println ("sort order:" + s);
}
OAViewObject VO1 = getAdvResultVO1();
Row1 row;
If (VO1! = null)
{
Row1 = VO1.first ();
Row1.SetAttribute ("SortColumn1", S2);
Row1.SetAttribute ("Order1", S1);
Row1.SetAttribute ("SortColumn2", S4);
Row1.SetAttribute ("Order2", S3);
Row1.SetAttribute ("SearchId", new Number (111));
Row1.SetAttribute ("UserId", new Number(-1));
Row1.SetAttribute ("SearchName", "Out Nouvelle1");
}}
Public Sub setSortOrder()
{
OAViewObject VO = getAdvResultVO1();
Line line;
String s1 = "";
String s2 = "";
String s3 = "";
String s4 = "";
If (VO! = null)
{
line = VO.first ();
If (line! = null)
{
If (Row.GetAttribute ("SortColumn1")! = null)
S1 = row.getAttribute("SortColumn1").toString ();
If (Row.GetAttribute ("SortColumn2")! = null)
S2 = row.getAttribute("SortColumn2").toString ();
If (Row.GetAttribute ("Order1")! = null)
S3 = row.getAttribute("Order1").toString ();
If (Row.GetAttribute ("Order2")! = null)
S4 = row.getAttribute("Order2").toString ();
}
System.out.println ("sort order:" + s);
}
OAViewObject VO1 = getSortOrdrerVO1();
Row1 row;
If (VO1! = null)
{
Row1 = VO1.first ();
If (row1! = null)
{
If (s3! = null)
Row1.SetAttribute ("SortOrder", S3);
If (s1! = null)
Row1.SetAttribute ("ColumnName", S1);
Row1 = VO1.next ();
If (s4! = null)
Row1.SetAttribute ("SortOrder", S4);
If (s2! = null)
Row1.SetAttribute ("ColumnName", S2);
}
Row1.SetAttribute ("SearchId", new Number (111));
Row1.SetAttribute ("UserId", new Number(-1));
Row1.SetAttribute ("SearchName", "Out Nouvelle1");
}}
Hope this will help, for any clarification on the code, you can call me.
Kind regards
Out Sharma -
Browser problem to display a value in the field "display only".
I'm trying to display a value in the "Display" section only when AJAX select list is changed. This works fine in IE but not in Firefox. I created the test below page on the site of the APEX. Any ideas are appreciated.
http://Apex.Oracle.com/pls/OTN/f?p=54577:1
workspace: stone
username:[email protected]
password: apex_demo
Thank you
SuryaHi Surya,
I replaced x (node) .innerText = pValue; by $s (textNode, pValue); and it seems to work.
Kind regards
Jonathan -
Hi all
Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.
I did program mentioned above but it does not work. Can you tell me what is the problem?
There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.
I have attached my program with this message.
Thank you in advance!
(1) FOR loops are your friend here. You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.
(2) I would only treat the numeric values of the characters. So go terminal of control of the chain, the capital letters and byte array to before the outer loop. You can use a size of Board over there to tell how many times the outer loop to iterate.
(3) the Index table is extensible. So you only need over the index of the first, and it will increment itself, as it develops.
(4) you need to finish the lookup table (table 3D)
-
Get the current index value of the table control
I have a table control 1 d on a panel that contains a value of temperature curve that I send to a temperature controller. The values in the table are not unique, because for example 40.5 degrees in the table could represent 40.5 degrees on the cycles of cooling or heating. I could have severat heating/cooling cycles programmed into the table. I would like a way to read the array index of the currently displayed item in the array in the up/down control of index on the left of the table control. I could then run curves partial temperature easily by neutrophilia a starting point on the curve in the table control.
I don't see a property that I can use to get this index value. Anyone have any ideas?
Thank you
J
Use the property 'index values. It will be the first item of the output of a 1-d array.
-
2 definitions of view based on the value of the table
Hi all
Is it possible to have 2 different definitions of each entry of 2 base tables display different, based on the value of the table?
We have 2 tables with similar columns, one with historical and other data was only the latest / greatest according to yesterday (it is populated by ETL from mainframe). Changes made by the java application online is now going into the table containing historical data immediately, but edits made in mainframe comes to the table with the data current next day.
There are 2 products, an is based on the last and largest of the historical table based on cre date and date of mod and other product relies on the table with the current data (not historical).
Tried using joins for these two tables but the performance wasn't good and each product needs table data alone, and so I wanted to eliminate joins.
We wanted to use the same name for the view from the metadata using the shared functionality based on the name of the view.
Is there a way define a view under certain conditions?
It is:
If the value for a particular parameter is 0 then
Select c1, c2, c3 of < historical table > other
Select c1, c2, c3 of < no history table >
Any ideas?You are looking for something like this?
Re: how to pass parameters in a view -
Values in the table are not default values
Hi every1,
I'm working on a VI which relates to the evolution of the points in the chart. Almost, I finished my VI but the thing is that the table of values which
IAM using here (table Y) do not appear in the value by default when I stop the vi. When I stop and run the vi finally stored values
Table are defined. One thing is when I click on the stop button is not key to its end. The VI only stops when the stop button goes top
and then at the bottom. I mean to stop twice the stop button must be clicked. Here's my VI. Help me to know my mistake here in this
VI..........
AAH, I guessed correctly!
Remove the local var of the button stop & place the terminal itself inside of the while loop inside & it wire directly to the conditional from the outside while loop.
Please see the attached picture...
-
Find the minimum value of the table in time...
Firstly that it is not "find the min value in the table.
It is:
I have a table that changes its values at each iteration, and I want to compare the new values with previous values and make a new array with the minimum values...
In C++, it would be like this:
int main() {}
int array [8];
int min [8];
int i;
for (i = 0; i<>
min [i] = 1000000; Initialize minimum table with a high value
}
{while (1)}
Array = update_array ();
for (i = 0; i<>
If (array [i]<>
min [i] = array [i];
}
}
do things...
}
return 0;
}
IM new to labview and it always confuses me a lot...
Thanks in advance.
Using the function Max & Min regular (not table Max & min as you know) with tables and a good will of employment registry change. Max Min &, as most of the digital functions, is polymorphic and works witt tables as well as scalars.
Lynn
-
How to find null values in the table
Hi experts,
my version is oracledb10g:
I am doubted simple.
for example:
create table ex1 (e varchar2 (20));
Insert ex1 (null).
insert into ex1 (e)
number of will be: 2
I can easily find the value "e".
so my question is:
How can I find null values in the table and I want to remove the null values from the table.ADF 7 wrote:
Hi experts,my version is oracledb10g:
I am doubted simple.
for example:
create table ex1 (e varchar2 (20));
Insert ex1 (null).
insert into ex1 (e)
number of will be: 2
It depends on what you expect. If you issue count (*) you ask Oracle "how many lines there. If you issue a County (
) you ask Oracle 'how non null values for are there. " ADF 7 wrote:
I can easily find the value "e".
so my question is:
How can I find null values in the table and I want to remove the null values from the table.
delete from
where is null; Ideally you would simply place a NOT NULL constraint on the column in question, thus prohibiting NULL values into the system (assuming that your business needs, it is that the column MUST always have a value).
-
NPE for rows with null values in the table of the adv
I created the table adv, 2 columns, equipped with two text fields. Initially the col2 is empty,
say that the structure is as follows:
When the user clicks on apply button I want to update these values in the table.col1 col2 Hdr Question Answer row1 abc zxc row2 pdd null (user doesnt enter anything) row3 zxc lkj APPLYBUTTON
I don't know how to do that, but that's what I'm trying to do. Please guide me the right way if its wrong.
in LICS, I took the APPLYBUTTON action, got all lines of the object corresponding to the view, consulted with everyrow and I'm checking if there are values in the fields in the table, if the value zero, are simply print null. (we would not update on this line). . I could get o the part update, due to null pointer exception
I get on the row line null pointer exception [1].getAttribute("Answer") for row2, it prints the value of row1 however.
Here is the code I wrote:
Set of rows from the rowset = (RowSet) vo.getRowSet ();
Rank rank [] = vo.getAllRowsInRange ();
System.out.println ("row.length" + row.length);
for (int i = 0; i < row.length; i ++) {}
String question = row.getAttribute("Question").toString ();
String response = row [i].getAttribute("Answer").toString ();
If (question! = null & &!("".)) Equals (question. Trim()))
{
System.out.println ("Question line" + i + "-" + question);
}
on the other
{
System.out.println ("Question line" + i + "is null");
}
If (response! = null & &!("".)) Equals (Answer.Trim ()))
{
System.out.println ("Response line" + i + "-" + response);
}
on the other
{
System.out.println ("Response line" + i + "is null");
}
Why the NPE survey code, I'm checking for null value and you want to print the value null in the logfile... I can not to getAttribute() on the null field, why can not just give me null in the variable I'm assigning to?
You can guide me what approach to take, if it is not correct.
I must examine DataDictionary and collect data there?
Thanks in advance.Hello
handle the exception of null on these two statements like this pointer
String question = "";
String response = "";Try
{
question = row.getAttribute("Question").toString ();
}
catch (NullPointerException e)
{
question = "";
}Try
{
answer = row.getAttribute("Answer").toString ();
}
catch (NullPointerException e)
{
response = "";
}Si ( !("". Equals (question. Trim()))
{
System.out.println ("Question line" + i + "-" + question);
}
on the other
{
System.out.println ("Question line" + i + "is null");
}Si ( !("". Equals (Answer.Trim ()))
{
System.out.println ("Response line" + i + "-" + response);
}
on the other
{
System.out.println ("Response line" + i + "is null");
}Thank you
Gerard -
Hi Experts,
I have a page in which I want to show the textual elements and the crumbs of bread according to the requirement on page load.
To do this, I gave the condition for navigation buttons and text elements bar as below:
Condition type: there is no
Expression 1: select null from ms_contracts where contractor_id = UPPER (v ('APP_USER') and contract_expiry_dt < sysdate)
The text value of the element (display only): ' your contact has expired, prents get it renewed. Position to renew the update below the new end date '
Above solution does not work for me. I guess there is no need to create dynamics of Action I want this to happen on the page load.
Ask that you please guide me.
Thank you.
Thierry
Hello
Have you tested your query do not return all rows using SQL workshop for example?
Not the condition watch Object Exists, when the query do not return all the lines.
BTW, it's better to use bind variable: APP_USER function v. APP_USER is also always capitalized
select 1 from ms_contracts where contractor_id = :APP_USER and contract_expiry_dt < sysdate
Kind regards
Jari -
different image to display for a range of values in the table of specific waveform
Hello!
I'm a VI that is as a precipitation meter reader that displays a picture of what will happen with a place with this amount of rain and display a message (which appears on the channel). Here is a picture of the public Service.
The mm of rain check will be the entry and it will be displayed in the graph. Boolean controls on the other side lights depends on the value of the entry. What I want to do is I want to display an image (which appears on the tab map of flood hazard) and a sentence on a string (which will appear on the additional announcement tab) for each Boolean control. The images and the sentence on the string is different for each Boolean control. For example, if the input is of 7.5, the Normal warning light comes on and at the same time, I want to display an image and a message on a channel. Here is the BD.
I can't launch the VI because there is more than one source in the chain and in the part of path. Also, I don't know what I will in the false statement in the Structure box. Also, I don't really know if putting the box Structure for each a reason.
Help is really appreciated (because that's my problem for almost 2 weeks now). Thank you very much.
I do not have the Toolbox, but I think all you need to do and put the right photo (or just make you a selector of images, such as a table that you can find in the functions of the vision).
Maybe you are looking for
-
I tried everything but keep getting "SERVER NOT FOUND TRY AGAIN" when I try again once it normally connects. What is the problem please
-
the driver installation failed after startup
Hi all an im new here and im facing a problem with my compaq c500 there this BSOD 0x0000007B problem and I was able to start following the guide but since I can not install all the drivers on my laptop it gives me an error called the driver installat
-
Java 0507 dy cve and cve java 0507 BO how to remove?
TKS Not deleted by adware
-
Hello I have a T420s with Nvidia Optimus graphics card. I also have the ThinkPad Mini Dock Plus Series 3. When I tried to drive an external monitor via DVI, I can't get the full resolution of 2560 x 1600. I searched the forums and found several threa
-
original title: my pc shuts off when I want that he my computer turns off sudenly while im using it. It shuts down without warning an i in bulk that I'm working on