Values in the table are not default values

Similar Questions

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• Adding new partition in the table are

  Hello
  
  Oracle 9i
  Windows 2003 operating system
  
  The main entry/exit table is one of the base tables that has a large number of records and a very high success rate, and to avoid poor performance that may occur in such cases, Oracle Table partitioning technique has been examined in the early stages of the implementation of the system.
  
  Unfortunately, the technique used to divide data based on the year of the transaction considered the year 2010 as the last specific partition, so all records created after this year is gathered in a single partition and this may cause poor performance in the years to come.
  
  Are required to add another 10 partitions; up to the year 2020 taking into account that the downtime should be close to zero.
  
  Ground:
  
  According to my knowledge
  
  for this, so we can create a new table with the same columns and add required 10 more partitions, and if we take 2 scenarios like
  
  export/imp
  insertion in the new table select * from < table > old
  
  What is the best, and if we take exp/imp, if her take a few hours of time to complete a task... what will happen for the updates as insert, update, and delete in this time what will be the impact on the import... I mean if all committed tarnscations... These tarnscations automatically add to the table are not.
  
  Please tell me what is the best and the tarnscations should not effect... pls tell me how excatly we can complete the task.
  
  Concerning
  873393

  In my script, I have a DROP TABLE because I'll put up a reproducible demonstration. I can run the script repeatedly and regenerate the same demo data!
  In your environment you would not fall off the table!
  To simplify the demo for you: IGNORE the DROP TABLE command. Pretend it does not exist.

  Hemant K Collette

• I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  Mr President.

  I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  

  the page source is

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                  xmlns:f="http://java.sun.com/jsf/core">
    <af:panelFormLayout id="pfl1">
      <af:group id="Group">
        <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                      required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId.hints.precision}"
                      shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
          <f:validator binding="#{bindings.VoucherId.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
        </af:inputText>
        <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                      required="#{bindings.VoucherDate.hints.mandatory}"
                      columns="#{bindings.VoucherDate.hints.displayWidth}"
                      shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
          <f:validator binding="#{bindings.VoucherDate.validator}"/>
          <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
        </af:inputDate>
        <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                      required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                      maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                      id="it2">
          <f:validator binding="#{bindings.Credit.validator}"/>
        </af:inputText>
      </af:group>
      <af:group id="g1">
        <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                      required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                      maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                      id="it3">
          <f:validator binding="#{bindings.Lineitem.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                      required="#{bindings.VoucherId1.hints.mandatory}"
                      columns="#{bindings.VoucherId1.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId1.hints.precision}"
                      shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
          <f:validator binding="#{bindings.VoucherId1.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                      required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                      maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                      id="it5">
          <f:validator binding="#{bindings.Debit.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                      required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                      maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                      id="it6">
          <f:validator binding="#{bindings.Credit1.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                      required="#{bindings.Particulars.hints.mandatory}"
                      columns="#{bindings.Particulars.hints.displayWidth}"
                      maximumLength="#{bindings.Particulars.hints.precision}"
                      shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
          <f:validator binding="#{bindings.Particulars.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                      required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                      maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                      id="it8">
          <f:validator binding="#{bindings.Amount.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
        </af:inputText>
      </af:group>
      <f:facet name="footer">
        <af:button text="Submit" id="b1"/>
        <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                   disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
        <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                   id="b3"/>
        <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                   immediate="true" id="b4">
          <af:resetActionListener/>
        </af:button>
      </f:facet>
    </af:panelFormLayout>
  </ui:composition>
  
  
  
  

  Concerning

  Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

  See you soon

  AJ

• I finally got CS2 installed on my system. But now the menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this?

  I finally got CS2 installed on my system. But now the drop-menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this? I tried to go into change preferences but it does not work

  I changed it to the value default them and that worked. Thank you very much

• Most of the sites are not loading on all browsers

  Hello

  2 weeks ago my MacBook Pro was working fine and I used it on the internet using an Ethernet cable for the 1st time. Then I had to travel and come back 2 days without it. When I tried to use it via my WiFi router, I realized that most of the sites are not loading on safari, chrome, firefox, etc. Only Youtube, Facebook, Twitter, Apple.com, Google and Yahoo are working. When I try other websites I get messages such as;

  Unable to connect

  Firefox can't establish a connection to the server www.google.com.

  The site may be temporarily unavailable or too busy. Try again in a few moments.

  If you are unable to load any pages, check your computer's network connection.

  If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

  
  

  and

  
  

  Safari cannot connect to the server.
  

  Other applications using internet work very well. My router is also OK. When I use the laptop mode safe mode everything works fine and I can access the sites but I need my machine in its maximum capacity.

  Please help me, I would greatly appreciate it

  Thank you

  This is probably a problem with Server DNS (Domain Name). If you enter anything in the DNS domains for your Wi - Fi configuration, it rolls too the parameters provided by your router.

  The best way to dig you out of ANY configuration problem, is to set up again from scratch, using:

  System Preferences > network > Wi - Fi > (help me) > (Assistant)...

  Be sure to specify a set of 'Place' new, mnemonic name, NOT the default. After answering questions, don't forget to click (apply) and close the window to have the changes take effect. Now, this set of parameters can be applied "all at once" when you're back at this place.

  When, in another location, create a new package from 'Rental' from scratch, so as not to crush those who work somewhere else.

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• A record in the table is not approved

  We have a PS4100x Equallogic in production. A few days ago one of the drives has failed and we ordered an original Dell HDD for this device. When we replaced the damaged for a new, the console says that the disc is not approved.

  We checked the documentation and cannot find that this happens when there are questions of firmware when the drives are not original (who from not Dell) and not alike.

  The other thing is that when I try to add to the table, the "Add table" option is gray out.

  Any help would be grateful, thank you!

  Hello stamac,.

  I'm sorry, but only Dell Equallogic brand work readers in a table EQL.  It is custom firmware on the drive on which the search table.   There is no work around for this.

  Kind regards

  Don

• How to check the table (null / not null) on the screen?

  Hello all :)
  
  
  I am beginner in JDEV
  
  I have problem with table.
  When you view the table, I want to know if the existing data in the table are empty or not (check the query zero / non-zero)? How to do
  
  someone help me... :))
  
  THX
  agungdmt

  Hello

  If you use ADF BC, access the iterator and call getEstimatedRowCound

  Table richeTableau = get JSF component binding to table

  TableBinding JUCtrlHierBinding = (JUCtrlHierBinding) (table.getValue ()) .getWrappedData ((CollectionModel));
  DCIteratorBinding iter = tableBinding.getIteratorBinding ();

  int count = iter.getEstimatedRowCount ();

  You can do the same thing in EL

  #{bindings.iteratorName.estimatedRowCount > 0}--> true if given

  Frank

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• Why the out put of the queries are not compatible?

  Why the out put of the queries are not compatible for the same object?
  -----------------------------------------------------------------------------
  
  SQL > select table_name, blocks from user_tables where table_name = 'ENTRANTS ';
  
  TABLE_NAME BLOCKS
  ------------------------------ ----------
  ENTRANTS * 0 *.
  
  ---------------------------------------------------------------------------
  
  SQL > select count (*) in incoming.
  
  COUNT (*)
  ----------
  * 200000 *.

  Beacause after insertion of 200000 enties, table user_table not but I have statistics and statistical data not updated before you query the user_table. Use analyze, command to get new statistics for this table.

• Photos marked as favourites on the iPhone are not appearing in the Favorites folder in the pictures on Mac

  I mark my favorite photos directly on the iPhone. When downloaded from Photos on iMac selected Photos "Favorites" on the iPhone are NOT appearing in the Favorites folder.

  Apple forces us to use iCloud to operate? Because that I do not use iCloud and I used!

  IF you do not use iCloud photo library, favorite sides will not be synchronized.

• The documents are not displayed

  My items in the Documents are not displayed.

  I recently downloaded OS X El Capitan.   The problem might be related to that?

  Thank you very much.

  Have you tried a Spotlight search for the name of one of these files?

• For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left. Tried to 'fix this folder' and lost ALL

  For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.

  Tried to 'fix this folder' and ALL - lost ALL the Inbox.

  The file is still there and works well...

  How can I stop it and what are the causes?

  Thank you all, Gabe

  If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

• Icons, twitter bolts on the site are not displayed?

  According to the bounding, icons pictures, twitter bolts on the site are not displayed?
  Help please?

  Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

  (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

  "3-bar" menu button (or tools) > Options > content > button "Advanced".

  Here you must "allow pages to choose their own fonts.

  (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

  • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
  • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
  • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

  This seems useful.