Display the date in a column

Similar Questions

• display the data in row columns

  I looked through the previous posts, but it is impossible to find a solution to my problem.
  
  I want to display the data in row columns.
  I have shown in the table below and test data and the sql code that gives me the result desired.
  However, you can see that the sql depends of me knowing all the values in the column "rank".
  I want a way to produce the output without knowing the values of rank.
  

  CREATE TABLE test1 (
    accno       NUMBER,
    holder_type VARCHAR2(10),
    rank        NUMBER)
  
  INSERT INTO test1 VALUES (1, 'acr', 0);
  INSERT INTO test1 VALUES (1, 'bws', 1);
  INSERT INTO test1 VALUES (1, 'aaa', 2);
  INSERT INTO test1 VALUES (2, 'cds', 0);
  INSERT INTO test1 VALUES (2, 'xxx', 1);
  INSERT INTO test1 VALUES (3, 'fgc', 0);
  INSERT INTO test1 VALUES (4, 'hgv', 0);
  INSERT INTO test1 VALUES (4, 'bws', 1);
  INSERT INTO test1 VALUES (4, 'qas', 2);
  INSERT INTO test1 VALUES (4, 'aws', 3);
  
  Here's the required output:=
  ACCNO     ALLCODES
  1     acr bws aaa
  2     cds xxx
  3     fgc
  4     hgv bws qas aws
  
  I.E. for each accno display the holder_types in rank sequence.
  
  SELECT * FROM
  (SELECT 
         a0.accno,
         a0.holder_type || DECODE(a1.holder_type, NULL, NULL, ' ') ||
         a1.holder_type || DECODE(a2.holder_type, NULL, NULL, ' ') ||
         a2.holder_type || DECODE(a3.holder_type, NULL, NULL, ' ') ||
         a3.holder_type || DECODE(a4.holder_type, NULL, NULL, ' ') ||
         a4.holder_type allcodes
    FROM (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 0) a0,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 1) a1,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 2) a2,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 3) a3,
         (SELECT accno,
                 holder_type,
                 rank
            FROM test1
           WHERE rank = 4) a4
   WHERE a0.accno = a1.accno(+)
     AND a0.accno = a2.accno(+)
     AND a0.accno = a3.accno(+)
     AND a0.accno = a4.accno(+)) a
     ORDER BY accno

  So you're after what we call 'Aggregation in the chain.'

  Check this link as it highlights several techniques:

  Aggregation of string techniques

  A Re: Concat ranks of the values in a single column Michael

  At Re: multiple lines in a single line in the 'single column Table' followed by reason of Billy on the conduct of a stragg first.

  In addition, 11 GR 2 has the LISTAGG function.

• How to display the date (instead of number) along of there axis of column chart?

  Hello

  I have a requirement in which I need to display the date on the projects along the x axis and y Axis. It is essentially a graph of milestone. Something like this:

  

  Here is my code:

  < mx:ArrayCollection id = "acProjects" >
  < mx:Object PROJID = 'A1' projDesc = 'Execution of Civil engineering works' plandate = '2009-12-23' actualdate = "2009-11-25" / >
  < mx:Object PROJID = "A2" projDesc = 'Installation of equipment' plandate = '2010-02-15' actualdate = "2010-03-25" / >
  < mx:Object PROJID = 'A3' projDesc = 'Comissioning of Equipment' plandate = '2010-05-30' actualdate = "2010-06-15" / >
  < mx:Object PROJID = 'A4' = 'Transfer to regular use' projDesc plandate = "2010-04-23" actualdate = "2009-03-30" / >
  
  < / mx:ArrayCollection >

  < mx:ColumnChart id = "columnchart1" width = "100%" height = "100 percent" color = "black" dataProvider = "{acProjects}" >
  < mx:horizontalAxis >
  < mx:CategoryAxis categoryField = "projDesc" / >
  < / mx:horizontalAxis >
  < mx:series >
  < mx:ColumnSeries displayName = "Date" xField = 'projDesc"yField ="plandate"/ >
  
  < / mx:series >
  < / mx:ColumnChart >

  But with this code, I get something like this:

  

  In general, by default, the y-axis is always numbered. Is there a way where we can change to display date?

  Appreciate your help...

  -Deepak

  Use the DateTimeAxis:

  http://livedocs.Adobe.com/Flex/3/langref/MX/charts/DateTimeAxis.html

• call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. The other rows are based on the entities

  Hi Experts,

  JDeveloper 12.1.3.0.0

  I have a VO based on entity object. With a column of the VO is transient attribute (I created).

  I need to call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. As well as other attributes.

  So can anyone suggest how can I achieve this?

  Thank you

  AR

  I think that you need a stored function (which returns the value) in this case, is not?

  Take a look at:

  https://docs.Oracle.com/CD/B31017_01/Web.1013/b25947/bcadvgen005.htm

  and search for:

  Invoking stored function with only Arguments in

  call your function in the Get attribute and return value accessor...

• How to display the data, that contains non-numeric characters.

  Hello

  I have table t1 with column of type varchar2 below

  ID

  ------

  11151

  11412

  1113

  1 to 114

  11b 15

  111 6

  Now, I need to display the data, that contains non-numeric characters.

  Did you get the result like:

  STR

  ----------

  1 to 114

  11b 15

  111 6

  WITH t
       AS (SELECT '11151' str FROM DUAL
           UNION ALL
           SELECT '11412' FROM DUAL
           UNION ALL
           SELECT '1113' FROM DUAL
           UNION ALL
           SELECT '1a114' FROM DUAL
           UNION ALL
           SELECT '11b15' FROM DUAL
           UNION ALL
           SELECT '111c6' FROM DUAL)
  SELECT *
    FROM t
    where regexp_like(str,'[^[:digit:]]');
  

  See you soon,.

  Manik.

• See the date with timestamp column column

  Hello
  
  In the table have am capture the creation_date as date data type column. I prepare a report to display the date. Is it possible to display the date with creation of time stamp
  
  I use oracle 10g Enterprise Edition
  
  The table name is LICENSING name column is CREATION_DATE
  
  Please suggest me
  
  Thank you
  Sudhir

  Which indicates that the data currently stored in the table always have an hour of midnight. Whatever the application / process that inserts the data is, apparently, not the component "time" DATE in the desired way. You will need to set the insertion process to spend time in your report.

  Justin

• PivotTable ' display the data as "percentage of accuracy

  Hello
  
  I would like to know if there is a way to configure the PivotTable ' display the data sub - percentage of ' precision.
  
  ATM, I have reports using SR types where one of those who are much bigger than others... Thus, when its generated report, it returns something like:
  
  TYPE A: 99%
  TYPE B: 0%
  TYPE C: 0%
  TYPE D: 0%
  
  How can I view other correct value types? Something like number of decimals...
  
  PS: as criteria in this report, I changed my data Format 'Number', ' less:-123 "to 15 decimal places.»
  
  Thank you
  Ramon

  902360 wrote:
  Hello

  I would like to know if there is a way to configure the PivotTable ' display the data sub - percentage of ' precision.

  ATM, I have reports using SR types where one of those who are much bigger than others... Thus, when its generated report, it returns something like:

  TYPE A: 99%
  TYPE B: 0%
  TYPE C: 0%
  TYPE D: 0%

  How can I view other correct value types? Something like number of decimals...

  PS: as criteria in this report, I changed my data Format 'Number', ' less:-123 "to 15 decimal places.»

  Thank you
  Ramon

  Well Yes. Can do. Read this link:

  http://shivabizint.WordPress.com/2008/09/14/changing-the-precession-of-percent-of-columns-in-pivot-table-of-OBIEE/

• How to display the Date Predefault time

  Hi friends,
  
  How to display the date in the field to date through sctipting by default I have a requirementy to display the date field as the next day's date with timestamp from 09:00 (15/02/2010-09:00) data type as the field & column is UTC_datetime.please help I get.
  
  
  Siebel bee

  Take a look at the function today(), TimeStamp() and ToChar()

  You should be able todo with something similar to this:

  Expr: "ToChar (TimeStamp (), 'MM') + ' / ' + ToChar (TimeStamp (), 'DD') + ' / ' + ToChar (TimeStamp (), 'YYYY') + ' ' + ToChar (TimeStamp (+(1/24), 'HH')) + ': 00:00.

  as a value before failure.

• Creation of a detailed report to display the date today

  Hello
  I try to display today date in the format of narrative report form. Anyone know how to code in HTML format?
  Here is my code to display the date: -.
  
  < TABLE align = "left" >
  < b >
  < TD > < B > < / b > < table >
  < TD width = "520" > < table >
  < TD > < B > < / b > < table >
  < /TR >
  
  < b >
  < TD > to < table >
  < TD >: @1 < table >
  < TD width = "100" > Date < table >
  < TD >: < table >
  < /TR >
  
  Please advice. Thank you

  Laughing out loud. what David wanted to create a custom field in your report to step 1 and initialize it as CURRENT_DATE.
  then, at step 2 of report design, use the identifier of this new column instead of @1

• Display the data in a Dimension

  Hello
  
  I have a dimension with two levels
  
  1 program
  2. courses
  
  Program which is the parent level contains the names of programs as: MSc, engineering, electrical, computer science MSC, PhD Environmental Engineering...
  
  Course is the level of the child and contains the names of the courses that are included in the programs.
  
  I've specified the descriptor of the name of the program as "long Description".
  
  When I right-click a dimension, and then 'Data' to display the data, it's for me.
  The names of the programs, and when I drill down, he gives me the Dimension_Key of the courses in the respective program.
  
  Instead of the surrogate key, I want to display the names of the courses included in this program.
  
  
  What should I do to achieve this...?
  
  Kind regards...
  RF
  
  Edited by: badwanpk on January 29, 2009 14:58

  You can set a dimension (for example) DISPLAY_NAME attribute that applies to both levels and this attribute is defined as a long description attribute. It can be mapped to a column for the program and another for the course. Or have a dimension for each level attribute.

  See you soon
  David

• How display the date of my last update of OSX in my Mac?

  How display the date of my last update of OSX in my Mac?

  If it was in the last 30 days, the updates will often (not always) show the Mac App store on your page of updates, under the heading "updates installed in the last 30 days.

• is it possible to display the Date and time in the address bar or a clock window constantly

  I need to take screenshots with date stamps and time using the script of iMacros. Everything by taking screenshots iMacro don't add taskbar windows for the date and time. It takes screenshots of browser. Is it possible to display the Date and time in the address bar or a clock within the tab browser constantly to capture the screenshot with time stamp through iMacros
  I added the big clock background Add-ons, but it is visible to new tabs.

  Badly looking for help and it will be really appreciated...

  Try this extension:

  • https://addons.Mozilla.org/firefox/addon/simple-clocks/
  • https://addons.Mozilla.org/en-us/Firefox/addon/FoxClocks/

• A model of TV Sony KDL-32BX330 has somehow display the date or time? MENU button does not

  A model of TV Sony KDL-32BX330 has somehow display the date or time? The button MENU has no option to select or adjust the time or date... maybe a new firmware?

  Hello, manual,.

  There is no option to display the time and date of the TV Sony KDL 32BX330.

  We cannot comment on future firmware updates, nor can respond us if a product will not in the future it does not currently feature.

  If my post answered your question, please mark it as an "accepted Solution".

• Camileo S20 - How to display the date and time

  Hi, all. I got as Christmas present the Camileo S20, and I am not able to view the date and time in the video. In the manual is no reference on this subject, only how to set the date and time. But what is the intention to set the date and time in the camera, if it is not possible to display video?

  Hello

  Have you checked the user manual of your TV cam?

  If it of possible to display the data and the time you can find in your user manual how to do this. It always interesting to read ;) s

• clock in the notifications box no longer displays the date beneith the time

  Series HP Pavilion HPE h8 - 1360t running Win 7

  When I ran Setup and decided that I needed to install the software, I notice that the date is now displayed in the tray under the era.  I was happy that I is no longer my clock application to display the date.

  Now that I've installed all the updates and my usual software, the clock in the notification area displays only the time.  The date seems to have disappeared.

  I don't know what I've done or installed to make it disappear.  I can't find a way to recover.

  Is there a software switch somewhere that turns on the display of the date of the clock?

  Normally, the 'taskbar' are a height of 'one'... the time is displayed. If you unlocked the "taskbar" and stretch up to a height of 'two'... the time, day and date will be displayed. Thereafter, be sure to lock the taskbar to prevent change.

  Please send Bravo