Display the help of spectral - cannot zoom in its all blurry

Similar Questions

• my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  Hello

  1. are you able to use with other applications that connect to the Internet?

  2. when exactly you get this error message?

  3. should we come up with any specific Web site?

  4. what version of Internet Explore do you use?

  5. don't you make changes to the computer until the problem occurred?

  6. the problem occurs in safe mode with networking?

  I suggest you follow the methods listed in order of appearance in the following Microsoft KB article:

  How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  For your reference: Internet Explorer could not open the Search Page.  http://support.Microsoft.com/kb/219004

  Hope this information is useful.

• DreamWeaver F1 to display the help file for Coldfusion

  Hello

  How to use F1 to display the help file for Coldfusion.

  I just installed an old copy of CS3 on my laptop, but I struggled in F1 to display the help of CF on a label CF.

  I downloaded and installed ColdFusion 9.01 atgs and Dreamweaver Help file.

  Should it be activated?

  Thank you

  or try SHIFT - F1, which will open the documentation of this tag in the Panel.

• There the init.ora parameters cannot be changed at all?

  DB version: 11 GR 2

  We have the following two types of initialization parameters

  Dynamic - which can be changed without a rebound in DB (example CURSOR_SHARING)
  Static - which can be changed with a rebound in DB (example MEMORY_MAX_TARGET)

  The two types of init parameters listed above can be changed with or without a rebound in the DB. There are initialization parameters that cannot be changed at all with or without a rebound in DB?

  Max wrote:

  Documentation is Oracle that describes the init.ora parameters ' Oracle database reference 11gRelease 2'. It is not answered my question

  Maybe it does.

  of DB_BLOCK_SIZE

  The value of DB_BLOCK_SIZE in effect at the time you create the database determines the size of the blocks. The value must be set to its initial value.

  
  

• display too large on / off. Zoom, text size all the normal value, how do I get screen to fit within the monitor _

  already checked the themes of office/customization, dpi resolution, text size, appearance, zoom... know not how to fix, it is a (shared) unit and can not say that everything has been done to the system, know that I tried to upgrade to vista sp2 but updated (recommended) is obsolete!  HELP, PLEASE

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• After installing Windows 7 using MDT, Windows displays the message "Windows Update cannot currently check for updates because the service is not running.

  Hi all

  I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.

  The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.

  Any help?

  It became quite a headache for me. Thank you guys

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the installation of Windows Update.

  If you your computer are connected to a domain network?

  If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.

  T echNet Forums for Windows 7 
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Display the help blackBerry Smartphones

  Help, please...

  My screen turns on automatically when you are sitting on the counter/table (unaffected) every 10 to 30 seconds without interruption. Even if I have the screen lock or the phone is completely locked, the home screen keeps popping up. When I try the single screen lock, less than a minute the screen turns and unlocks automatically without touching the phone.  Help please! It's killing the battery.

  solved my problem... I just soft reset. Removed the mixture and reset phone. Everything works fine now... Seems that, when a lot of downloading and adjustments are made over the phone, especially when buying first, this reset lets put everything back and all functions are restored. Thanks anyway for those who thought to help.

• Windows Update displays the empty dialog box - cannot update (Vista x 32)

  Hello!

  Dell Vostro 1400 laptop
  Windows Vista 32-bit

  I had this problem since December 08 and sought a solution for this problem on and off for 6 months now, hoping ultimately that someone could post a viable solution.  So far all that I tried and reading doesn't seem to work, but at the same time a lot of positions were never concluded by the original poster so, either they abandoned or found something else.

  This image describes essentially the question that I have:

  Here's my Log of Windows Update (to change the txt extension, so that I could upload it)

  Following advice found on other posts, I tried using these two programs and changed nothing: windowsupdateagent30 - x 86 .exe and ResetWindowsUpdate.msi (in the first mode and aggressive mode, restarting after each time)

  Let me know if there is any other information I can give you, I'm waiting for your tips.

  Bravo and thanks,

  Jens

  Hi JensUS,

  Thanks for posting your answers on the community forum.

  According the information on the forum, it sounds as if, has)  There may be malware, virus on your system, B problems.)  Just system files are corrupt.

  Here are a few links that our community members have posted involving Malware and Virus protection.  Please run or walk through the suggestions as you wish;

  AntiVirus information: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/05e05fc2-e4eb-4a60-9384-7b1203941138

  Information of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  If the Antivirus or malware don't find any underlying problem.  If you are able to get the disk, following the suggestion of Matt can lead to the desired result.  If that fails, what Joseph has suggested is a good plan.  It is not a NEW INSTALLATION of Windows Vista, it replaces all just all the system files with the correct copy of the file system.  After it's over, you will have to reinstall any service packs and updates have been installed. (See note Joseph.)

  Please let us know if further information is required on this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update ESXi 5.5 to update02 - with the help of PuTTY cannot browse datastore?

  I intend updating to 5.5_update02 this next Tuesday (10/14) and have the following steps that I will run via Putty however one thing bothers me. When I try to browse the "vmfs/volumes/datastore1' he said '-sh: cd: can't cd to datastore1. Don't know if it's ok or not. I figure if I'm going to request an update location, I should be able to navigate it's good? Maybe I need to be in maintenance mode?

  The update path is "vmfs/volumes/datastore1/updates", but if I can't get into the data store how can I request an update this place?

  Maybe he'll just I work just find it strange.

  Here are my steps:

  1. Putting ESXi into maintenance mode
  2. Vim - cmd hostsvc/maintenance_mode_enter NOW seen datastore in Vsphere. Then on the Summary tab, select "enter maintenance Mode".
  3. Connect a.240 via putty as root (no PW) ' esxcli software update - d vib "vmfs/volumes/datastore1/updates / update name.zip.
  4. Reset
  5. Out of maintenance mode in putty - "vim - cmd hostsvc/maintenance_mode_exit"

  OK, because ESXi is case-sensitive, try cdd/vmfs/volumes/DataStore1

• With the help of HP Deskjet Ink Advantage 2060 All-- One Printer - K110a with HPLIP Linux in

  Hi, guys!

  I recently bought this printer and have unsuccessfully to obtaining HPLIP to recognize.

  I downloaded the latest HPLIP software and run the script to install, but still no joy.

  I can use it as a printer, like Ubuntu Linux recognized, but the Scan function and the ink level functions do not work.

  I already had a PSC1350 All-In-One which has worked flawlessly with HPLIP.

  I tried to switch to the HP Linux web site (http://hplipopensource.com/hplip-web/supported_devices/index.html) but it ihas been down for the last 2 days, with a notice indicating that it is down for maintenance.

  I also tried to use SANE to detect the passage of scanner of the printer, but nothing helped.

  Anyone know if HP will add this printer to the HPLIP collection?

  Kind regards

  Roger

  Now works perfectly with the latest HPLIP package.

  Worm 3.11.1

  HP-Toolbox works with all the functions for the maintenance of the printer.

  A SANE backend is provided and scanning works perfectly.

• IRQL_NOT_LESS_OR_EQUAL blue screen. No luck with the help, can't "Repair computer". Help, please!

  Whole new generation that has been very well,

  Mobo: EVGA P55 SLI,

  Processor: Intel Core i7 860,

  RAM: Mushkin matched 2 X 2 = 4 GB

  PS: Blue Antec 750W

  GPU: EVGA Nvidia GTX 260 SLI (x 2)

  HD' Samsung 750Go (x 2) RAID 1

  DVD RW

  Blue Ray RW

  OS: Vista Edition Home Premium 64-bit

  System has been great from the GET go, there are more than 2 weeks. Never a failure to the no boot, no lock ups etc. Woke up in the middle of the night last week with cmptr attempt to restart. No new software or hardware installed had been. Nothing worked, quiet dampened.

  From there on, I was not able to start Windows.

  I entered the BIOS and tried to start a well known point... nothing. Always get blue screen. I have reset the CMOS on the mobo, removed the battery on the mobo and reinstalled. I unplugged the two hard drives power and SATA cables, bought a NEW (third) HD and installed, with only one new HD connected, with a full version of Windows Vista DVD in the CD/DVD drive, tried to boot Windows from scratch... still get the blue screen?

  Blue screen says:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time...

  Check that any hardware or software is installed correctly.

  technical info:

  STOP: 0X0000000A

  (0xFFFFFA8D839EFB18),

  (0 x 0000000000000002),

  (0 x 0000000000000001),

  (0xFFFFF8000A481DD2)

  I was able to run the memory test and it came back without errors. I was not able to get to "repair your computer", as the beginning is never far away. When the computer reboots, it comes to the sequence: normal mobo beeps (five) than even that when the system was working fine... then I get the graph of the mobo splash screen EVGA P55 SLI,... then black screen with "Windows loading files"... which appears just above the loading bar (it looks like gage fuel fill from left to right).

  Once the bar then "fills" Blue Screen of Death!

  It's EXTREMELY frustrating because it was built for me by an employee of INTEL (very smart read), all latest drivers etc. Very little software loaded on the system. Most of the aid that I read guess you can operate within Windows already... Catch 22! I can't!

  Hello

  You get beeps when it worked? This is not normal.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  =======================================

  Think that material:

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
  updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
  suspects. Next message is my generic driver updated methods to use when you get to this section of the
  troubleshooter.

  You can access Mode without fail - repeatedly press F8 as you start - last good configuration or system restore known?

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Look in the Event Viewer to see if something is reported on these reboots.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  BCCode: a

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  -------------------------------------------------------------------------

  It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Create the help text for the column tabular APEX region

  Hi guys,.

  Please see the screen - shot below.

  I have to do two things:

  1. this "5000" value is passed in the URL, for example P_41_TOTAL_LEAD_VALUE and I want to display in the currency format, i.e. 5 000.
  If the value is 60000, it should be displayed as 60 000.

  2. I am required to display the help text for column of tabular form - expected quarterly value, how to proceed with that?

  Thanks in advance

  Arpit

  

  Hi David,

  I have not tried to use the Format mask, however there is no change in the display format.

  Even I tried in a different format, nothing happens.

  Try the steps given, which will solve your problem

  1. create a hidden item I say P41_LEAD_VALUE

  Protected value: No.

  Pass the URL value on this element hidden instead of P_41_TOTAL_LEAD_VALUE.

  2 create a calculation on the point P_41_TOTAL_LEAD_VALUE

  Type: SQL Expression

  Point calculation: after region (s)

  Calculation: TO_CHAR (: P41_LEAD_VALUE, '999G999G999G999G999G999G990')

  Hope this helps you,

  Kind regards

  Jitendra

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• error code: 0 x 80070002: MS updates__The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
  There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
  help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Or - these two (above and below must be the same)

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents:

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe