Display the text in the second page of the report.

Similar Questions

• I can't change the text on my second page.  I locked it somehow?

  The second page of my document won't let me edit text. It of like I'm locked and cannot access commands. Does anyone have any suggestions?

  Thanks a lot for responding to my call! Apparently, I had unknowlingly created a transparent window on my 2nd page so it was completely blocked. If new to this program and of course functional on a deadline... grrrr

• Left to right alingment problem when displaying the report in Arabic

  Hello
  
  Am now work in Arabic reports, everything works fine, but the problem is with the alignment only.
  
  In the preparation of the report (generator of reports), alignment is from right to left, but in pdf format, change the alignment from left to right.
  
  I use Oracle Report Builder 10.1.2.0.2 and reports running on the Oracle 10.1.2.0.2 application server
  
  Can anyone help me this.
  
  Kind regards
  Iftikhar

  Installed the Oracle Forms and reports services 10g / application server Oracle 10 g (10.1.2.0.2) with the Arabic language and you have the problem solved.

• HP 1200 printer does not print check when it is connected to the Jetdirect card but will display the report

  HP 1200 printer is plugged in with the USB cord to HP Jetdirect box and it gets IP from there.   Printer is set for the server with the ip 192.168.10.7 of print

  Print server is 192.168.10.12.    Backend server account try to print to a control with the 1200 HP and output hit the print queue (we suspended the print queue)

  and then when we release printing printing disappears as his will be printed but no keys comes out.      As a test, we ran a simple report on the same printer who had no special formatting and it printed fine.

  Captured audit printing to a file and then realized that file to the other printer, HP Officejet K80, which was not intended for printing and it prints properly which confirms that the control is built in formatting standard code PCL5e.   What is unexplained, that's why the cheque will not be printed on the HP 1200.    Have already had experiences where the USB slave out of Windows workstatoins printers will not print documents at all the other stations of the network.   The print will be struck by the print queue and disappear, but the printer never lights.   In this case, it will work for printing unformated but won't work for the formatted print PCL.   This could be Windows networking printers or simply a problem with the HP 1200 and forum for both checking.

  Hello

  1. are you able to print Word documents, Excel and PDF?

  2 are computers and printers connected to a domain network?

  I suggest you to connect the printer directly to the computer and check if it helps.

  Please visit the following links and check.

  Printer network problems (applies to Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• PowerCLI script to display the number of vCPU by VMhost use

  Hi all

  I'm looking to get help here with powerCLI script to list each total number of ESXi vCPU host that is used to determine if there are any ESXi host CPU is more engaged.

  According to suggestion of performance in some blog vExpert, is around 1: 3 of Jepp core ratio: vCPU allocated, then how to display the report with the powerCLI for something like this:

  PRODESXi01
  Total of nuclei available: 32
  Used by the virtual machine: 28

  PRODESXi02
  Total of nuclei available: 32
  Used by the virtual machine: 38

  So according to the result above, the PRODESXi02 is more committed by 6vCPU allocated to the virtual machine.

  Note: The available total carrots is taken from the value of logical processors from the contents tab, when you click on the vSphere console.

  How to get this report using PowerCLI?

  Thank you

  You mean something like this?

  {Foreach ($esx in Get-VMHost)

  $vCPU = get-VM-location $esx | Measure-object-property NumCpu-sum | Select - ExpandProperty sum

  $esx | Select Name,@{N='pCPU'; E={$_. NumCpu}},

  @{N = 'vCPU'; E = {$vCPU}},

  @{N = "Ratio"; E = {[math]: Round ($vCPU / $_.)} (NumCpu, 1)}}

  }

• view the report in the region

  Hello
  I have 2 regions. in the region1, I add a button (and region1 have 3 text fields). region.2 type is query sql (pl sql return sql query function body).
  And I also have a process called insert. It is for the insertion of data (data inserted into 3 text fields) in the database when I am pressing the Add button.
  
  Insert the code in process
  
  Insert in the values(:p18_attributename,:p18_description,:p18_datatype) attribute.
  
  When the selected in the region.2 region1 (add button) button must display the report. To do this, I wrote the code in the source of the region.2 as follows
  
  DECLARE
  v_query varchar2 (1000);
  BEGIN
  IF: P18_attribute_name is not null THEN
  v_query: = 'SELECT attributename, description, attribute data type;
  END IF;
  Return (v_query);
  END;
  
  You can guide me please.

  Hello

  First of all good practices to use as the column names in your insert statement.

  Secondly, in your insert query, you mentioned "p18_attributename" values, but in your pl/sql code, you used "P18_attribute_name" it is intentional or a typo?

  Thirdly, after the insert are you no compensation values textfield? I think you should. Why should you check

  IF: P18_attribute_name is not null

  in your pl/sql code, you can directly write the sql code, when there is all the data that it will display after refresh your page.

  Thank you
  Tauceef

• Questions on the reports

  Hello
  
  I have two questions when creating reports in a page.
  (1) I use pairs model of attribute value to display the data. However, is it possible to change the template like
  col1 value1 value2 col2
  COL3 value3 value4 col4
  ...?
  
  (2) is it possible to put multiple reports in a form region?
  I have 6 reports on a single page. I want to consolidate
  for example:
  Heading1
  report 1
  report 2
  report 3
  
  Title 2
  report 4
  report 5
  Report 6
  
  Your help is very appreciated.

  Hello

  This is not my site (it's Kubecik Dene), so I have more details. If I understand correctly, the principles are:

  For a normal page: you create a region for each report and each region uses the model of the selected region. The region includes the entire structure, including the title and the formatting (for example, borders), for a region. Within the definition of the region is #BODY # which is where the report itself is created. Each region is then placed in one of the positions available region and each position of the region lies on template page using the #REGION_POSITION_01 # etc - and each of them can appear only once. When the page runs, each report in a position in the region is generated, but since each report uses a model of region complete, each of them receives its own title and borders etc.

  For your page: you want to view several reports in the same region, most of tags used in the model of the region are only required once a region rather than once per report - therefore, they must be removed from the template on the template of the page itself and the region. You must put your reports in two posts in the region, the tags should surround the two #REGION_POSITION_nn # that you want to use. Thus, you are then set folds/formatting the positions of the region rather than the regions themselves. Area of your report model should only include the #BODY # and any tag keep each separated from the other report. When the page runs, the position of the region Gets the title and border and reports are simple tables in there.

  You did not say what theme you are using, but here is an example of an application of theme 12:

  1. create a copy of the reports area model and change:

  <table class="t12ReportsRegion" id="#REGION_ID#" summary="" #REGION_ATTRIBUTES#>
   <tr>
    <td class="t12Header">#TITLE#</td>
   </tr>
   <tr>
    <td class="t12ButtonHolder">#CLOSE#   #PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</td>
   </tr>
   <tr>
    <td class="t12Body">#BODY#</td>
   </tr>
  </table>
  

  TO

  <table>
   <tr>
    <td class="t12Body">#BODY#</td>
   </tr>
  </table>
  

  This will just display the reports themselves in individual tables. The rest of the tags, including the region of style are not necessary here, but are required on the page template instead.

  2 create a copy of the page template that you are using (here I use the level one tab page)

  3 - Replace the current defintion of body with the following text:

  <table class="t12PageBody" cellpadding="0" cellspacing="0" width="100%" summary="">
    <tr>
      <td colspan="2" class="t12ApplicationLogo">
        <table width="100%" border="0" cellpadding="0" cellspacing="0" summary="">
          <tr>
            <td>#LOGO##REGION_POSITION_06#</td>
            <td width="100%">#REGION_POSITION_07#<br /></td>
            <td>#REGION_POSITION_08#</td>
          </tr>
        </table>
      </td>
    </tr>
    <tr>
      <td class="t12UserName">&APP_USER. <span class="t12NavBar">#NAVIGATION_BAR#</span></td>
      <td align="right" valign="bottom">
        <table cellpadding="0" cellspacing="0" summary="">
          <tr>#TAB_CELLS#</tr>
        </table>
      </td>
    </tr>
    <tr>
      <td colspan="2" class="t12VerticalBar"><img src="#IMAGE_PREFIX#themes/theme_12/ParentTabBase.gif" alt="" /></td>
    </tr>
    <tr>
      <td colspan="2">#REGION_POSITION_01#</td>
    </tr>
  </table>
  <table class="t12ReportsRegion" width="100%" summary="" style="border:1px solid blue;">
    <tr>
     <td class="t12Header">The First Heading goes here</td>
    </tr>
    <tr>
     <td class="t12Body" style="vertical-align:top;">#REGION_POSITION_03#</td>
    </tr>
  </table>
  <table class="t12ReportsRegion" width="100%" summary="" style="border:1px solid blue;">
    <tr>
     <td class="t12Header">The Second Heading goes here</td>
    </tr>
    <tr>
     <td class="t12Body" style="vertical-align:top;">#REGION_POSITION_04#</td>
    </tr>
  </table>
  <table>
   <tr>
    <td class="t12ContentBody" valign="top"><div class="t12Messages">#GLOBAL_NOTIFICATION##SUCCESS_MESSAGE##NOTIFICATION_MESSAGE#</div>#BOX_BODY#</td>
   </tr>
  </table>
  

  You will notice that REGION_POSITION_03 and REGION_POSITION_04 are now placed in the tags that were the main part of the definition of region model. Also note that the #... items # go to the model of the region have been eliminated or replaced by the fixed text (that is to say, the title has been hardcoded here).

  Now, on your page, set the first set of reports to be "Position 3 in the region" and the second set in ' region 4 "and rotate your page."

  Andy

• Display a text formatted in captivate 8

  Hello world

  Please is there a way to display a text well formatted (5 pages) in captivate 8?

  I have a few slides with lots of formatted text that I'd like to have display.

  Thanks in advance for your answer.

  I sincerely hope that you do not use a published project CP like that? You must use the htm companion file to start a course which will call the JS and CSS file to launch the SWF file. This is the reason why I was puzzled. And this may explain your problem, of course, since you're not in a browser window, it cannot launch another document in this window. Also raw Flash Player cannot display Flash files, like Adobe Reader displays pdf documents.

• problem with showing the report forms

  Hello
  Today, I have another problem :)
  
  I fix this text and it's simpler
  
  I have run reports of froms and I use RUN_REPORTS_OBJECT_PROC
  
  If I use standard report_id in this procedure, then I get
  
  WEB. SHOW_DOCUMENT ('http://oracle:8889 /'| reports_servlet |) ' /getjobid' | vjob_id |'? Server =' | report_server_name, "_blank");
  
  If the report is not any parameter is ok and this work but if I put some then I get page with witch element, I set value (parameter witch I want) then when I put send query I get error REP-50134
  
  But
  If I use
  WEB. SHOW_DOCUMENT ('http://oracle:8889 /'| reports_servlet |'? server = raportserv & report=c%3A\raporty\mod.jsp & destype = CACHE & desformat = HTMLCSS & userid = SCOTT % 2FTIGER % 40SZD & paramform = "Yes);
  
  I can open reports with the setting or not :)
  Where is the error in how hidden values see report_object?
  
  concerning
  
  Published by: user515960 on 2010-07-06 08:00

  Hello

  If you want to use parameters, then you need to create the report with parameters and your query owes me something like that.
  example: -.

  select ename,empno,sal.....from emp
  where empno=:p_no.............so here :p_no is parameter.now how you will use this in form with that code which is provide you in u r previos thread.
  

  something like that.

  DECLARE
  repid REPORT_OBJECT;
  v_rep VARCHAR2(100);
  rep_status VARCHAR2(20);
  plid ParamList;
  vParamValue number;
  BEGIN
  
  plid := Get_parameter_List('tmp'); 
  
  IF NOT Id_Null(plid) THEN
  Destroy_parameter_List( plid );
  END IF;
  plid := Create_parameter_List('tmp');
  add_parameter(plid,'p_no',text_parameter,to_char(:emp.empno));---------------here you have to add your block name and item name and also we add parameter(P_no) which is created in report builder with the above query.
  
  Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
  
  repid := FIND_REPORT_OBJECT('REPORT6');-----------------when you create report by using report nodes in form builder so you hav to Presss F4 to go to Property and there you have to set the report server name,desformat which is PDF and report name which is Report6 and also there in property u have to give the report path.
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
  
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
  
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
  
  v_rep := RUN_REPORT_OBJECT(repid,plid);
  rep_status := REPORT_OBJECT_STATUS(v_rep); 
  
  WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
  LOOP
  rep_status := report_object_status(v_rep);
  END LOOP; 
  
  /*Display report in the browser*/
  WEB.SHOW_DOCUMENT('http://computer name/IP:8889/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
  '||'server=report_server_name' || '¶mform=no','_blank'); 
  
  END;
  

  Note:-you need to start the report server before displaying the report.

• FRM-41219: can not find the report: not valid

  Hi am having the error when calling the report of my form in 11 GR 2 when I click the button I get this error

  FRM-41219: can not find the report: not valid

  and when I click the ok button on the error I get this error frm - 40738:Argument 1 to builtin RUN_REPORT_OBJECT can NOT BE NULL

  This is how I called the report

  DECLARE
  repid REPORT_OBJECT;
  v_rep VARCHAR2(100);
  rep_status VARCHAR2(20);
  BEGIN
  repid := FIND_REPORT_OBJECT('report4');
  v_rep := RUN_REPORT_OBJECT(repid); END;
   

  Try something like this:

  PROCEDURE TEST_REPORT IS

  Repid REPORT_OBJECT;

  v_rep VARCHAR2 (100);

  rep_status VARCHAR2 (50);

  BEGIN

  Rep: = find_report_object ('report4');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'html');

  SET_REPORT_OBJECT_PROPERTY (ID REP, REPORT_SERVER, '');

  v_rep: = RUN_REPORT_OBJECT (repid);

  rep_status: = REPORT_OBJECT_STATUS (v_rep);

  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')

  LOOP

  rep_status: = report_object_status (v_rep);

  END LOOP;

  IF rep_status = "FINISHED" THEN

  / * Display the report in the browser * /.

  WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ' |)

  substr (v_rep, InStr(v_rep,'_',-1) + 1) |'? "|' server =","_blank"); "

  ON THE OTHER

  message ("error when running report");

  END IF;

  END;

  Replace with your report server name.

  Concerning

• frm_41214 cannot run the report

  Hi all

  IAM very thanks for all

  I am using oracle 10g (10.1.2) relase2 Server applaction

  and iam trying to run reports

  and the report run sussefuly in the generator of reports, but on the application server notwork

  is the code I use in form

  DECLARE

  Repid REPORT_OBJECT;

  v_rep varchar2 (100);

  rep_status varchar2 (20);

  PARAMLIST PL;

  BEGIN

  Rep: = find_report_object ('EMPREP');

  PL: = get_parameter_list ('paraformlist');

  If not id_null (pl) then

  destroy_parameter_list (pl);

  end if;

  -Adjust shape report obeject

  SET_REPORT_OBJECT_PROPERTY (RepID, report_execution_mode, lot);

  SET_REPORT_OBJECT_PROPERTY (RepID, report_comm_mode, synchronous);

  SET_REPORT_OBJECT_PROPERTY (RepID, report_destype, cache);

  SET_REPORT_OBJECT_PROPERTY (RepID, report_desformat, "htmlcss");

  SET_REPORT_OBJECT_PROPERTY (RepID, report_server, 't1');

  PL: = create_parameter_list ('paraformlist');

  add_parameter (PL, 'paramform', text_parameter, 'no');

  add_parameter(PL,'P1',text_parameter,:USER_STUD_ID);

  -add_parameter(pl,'ss',text_parameter,:ss);

  SET_APPLICATION_PROPERTY (CURSOR_STYLE, 'BUSY');

  ----

  v_rep: = RUN_REPORT_OBJECT (repid, pl);

  rep_status: = REPORT_OBJECT_STATUS (v_rep);

  While rep_status in the LOOP ("CURRENT", "OPENING_REPORT", "PENDING")

  rep_status: = report_object_status (v_rep);

  END LOOP;

  IF rep_status = "FINISHED" THEN

  / * Display the report in the browser * /.

  WEB. SHOW_DOCUMENT ("http://192.168.1.xxxxxxx:7778 / reports/rwservlet/getjobid' |") substr (v_rep, instr (v_rep, '_',-1)+1) |'? (' | 'server = rep10g', '_blank');

  ON THE OTHER

  message ("error when running report");

  message ("error when running report");

  END IF;

  -change cursor

  SET_APPLICATION_PROPERTY (CURSOR_STYLE, 'DEFAULT');

  ----

  END;

  Thank you for all

  I received a fine of this database 11g a CASE_SENSITIVE_LOGON

  and I do change to run reports

  the Soulation: -.

  ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

  the site is: -.

  Oracle-base.com/Articles/11g/case-sensitive-passwords-11gr1.php

  Thank you alllllllllllllllllllllllllllll

• Cannot run the report please help

  Here is my code behind the button to run the report.
  
  declare
  Repid REPORT_OBJECT;
  v_rep VARCHAR2 (100);
  rep_status VARCHAR2 (50);
  BEGIN
  / * If other changes made by najim * /.
  IF: TXTFDATE is null THEN
  message ("Please enter Date of THE '");
  message ("Please enter Date of THE '");
  return;
  ELSIF: TXTTDATE IS NULL THEN
  message ("Please select up HERE '");
  message ("Please select up HERE '");
  return;
  ON THE OTHER
  Rep: = find_report_object ('HISTORY_REPORT');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repserver90');
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'F_DATE =' |: TXTFDATE |) ' V_DATE =' | : TXTTDATE | "The PHASE =' | : TXTPHASE: ' paramform = no ");"
  v_rep: = RUN_REPORT_OBJECT (repid);
  rep_status: = REPORT_OBJECT_STATUS (v_rep);
  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')
  LOOP
  rep_status: = report_object_status (v_rep);
  END LOOP;
  IF rep_status = "FINISHED" THEN
  / * Display the report in the browser * /.
  WEB. SHOW_DOCUMENT ('http://172.29.3.202/reports/rwservlet/getjobid': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repserver90","_blank"); "
  ON THE OTHER
  message ("error when running report");
  END IF;
  END IF;
  END;
  
  
  When I press the button, it gives an error message cannot run the report.

  Open the report server console and check the error here. : http://application-tier server: port/reports/rwservlet/showjobs? Server = REPORTSSERVER

  Published by: Andreas Weiden on 23.07.2011 09:13

• I am a beginner using Muse. Google shows all pages menu in the search results and all texts on these pages. How to just display the home page?

  I am a beginner using Muse. Google shows all pages menu in the search results and all texts on these pages. How to just display the home page?

  Thank you. I thought I created my Muse wrong site.

• I need to display the header in the second information page in pdf report using bi publisher

  Hello

  I need to display the header on the second page to leave information.

  I tried to use the fo:page - number of cases and does not work.

  Can you please help me find the solution?

  Thank you.

  Hello

  I found the solution. And it's resolved now.

  Just move the information necessary for the detail table and now it displayed each page if necessary.

  Thank you.

• I have two frames of texts linked on one page. But during an iteration by using everyitem() he chooses the second before the first?

  
  

  Salvation by the Expert

  
  

  I have two frames of texts linked on one page. But during a iteration using everyitem() he chooses the second before the first?

  var ObjDoc = app.activeDocument;
  var LstPara is ObjDoc.pages.everyItem ().textFrames.everyItem ().paragraphs.everyItem () .getElements ();.

  for (c1 var = 0; c1 < LstPara.length; ++ c1)
  {
  by var = [c1] LstPara;
  $.writeln (par.contents.toString ());
  }

  
  

  is there a specific reason for this? Please explain
  

  To solve your problem, try the following code:

  
  var ObjDoc = app.activeDocument;
  var LstTxtFrame = ObjDoc.pages.everyItem().textFrames.everyItem().getElements();
  
  for(var c1=LstTxtFrame.length-1;c1>=0;c1--)
  {
      var LstPara = LstTxtFrame[c1].paragraphs.everyItem().getElements();
      for(var c2=0;c2
  I have two frames of texts linked on one page. But during a iteration using everyitem() he chooses the second before the first?
  is there a specific reason for this? Please explain
  Text blocks InDesign will work in LIFO method (last in first out), that is, the last image of text created will be treated as a first picture of the loop, so try the above code.
  Vandy